Date: Thu, 2 Dec 1999 00:16:39 -0800 (PST) From: Frank Mayhar <frank@exit.com> To: current@freebsd.org Subject: Well, the 3Com 574BT is still broken. Message-ID: <199912020816.AAA84343@realtime.exit.com>
next in thread | raw e-mail | index | archive | help
--ELM944122599-84284-0_ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit And there appears to be some more brokenness. I've attached my latest (verbose) dmesg output. USB support is weird, and (not listed in dmesg) pccardd is failing to attach my Xircom modem card (which had been working), claiming "device not configured." Suggestions? I could Really Use an ethernet connection on this laptop; right now I have the cardbus card (3Com 575CT) and the pcmcia card (the 574BT) sitting here, useless. -- Frank Mayhar frank@exit.com --ELM944122599-84284-0_ Content-Type: text/plain Content-Disposition: attachment; filename=dmesg.txt Content-Description: dmesg.txt Content-Transfer-Encoding: 7bit 0000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) npx0: <math processor> on motherboard npx0: INT 16 interface apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 26 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x104c, dev=0xac17, revid=0x02 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 found-> vendor=0x104c, dev=0xac17, revid=0x02 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000fcd0, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 0000fce0, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00002180, size 4 pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x10c8, dev=0x0005, revid=0x20 class=03-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base fd000000, size 24 map[14]: type 1, range 32, base fe800000, size 22 map[18]: type 1, range 32, base fec00000, size 20 found-> vendor=0x10c8, dev=0x8005, revid=0x20 class=04-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[10]: type 1, range 32, base fe000000, size 22 map[14]: type 1, range 32, base fe700000, size 20 pci1: <PCI bus> on pcib1 vga-pci0: <NeoMagic MagicMedia 256AV SVGA controller> at device 0.0 on pci1 pci1: unknown card (vendor=0x10c8, dev=0x8005) at 0.1 irq 11 chip1: <PCI to CardBus bridge (vendor=104c device=ac17)> at device 4.0 on pci0 chip2: <PCI to CardBus bridge (vendor=104c device=ac17)> at device 4.1 on pci0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0 ata-pci0: Busmastering DMA supported ata0: iobase=0x01f0 altiobase=0x03f6 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0 at 0x01f0 irq 14 on ata-pci0 ata1: iobase=0x0170 altiobase=0x0376 ata1: mask=03 status0=50 status1=00 ata1: mask=03 status0=00 status1=00 ata1: devices = 0x4 ata1 at 0x0170 irq 15 on ata-pci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 11 at device 7.2 on pci0 uhci0: USB version 1.0, chip rev. 1 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision unknown, not supported uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: <Intel 82371AB Power management controller> at device 7.3 on pci0 intpm0: I/O mapped 2180 intpm0: intr IRQ 9 enabled revision 0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus general purpose I/O> on smbus0 intpm0: PM I/O mapped 8000 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa0: if_ep: unknown ID 0xffffffff isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: status 10 00 64 psm: data 08 00 00 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: APM hooks installed. psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <4 virtual consoles, flags=0x200> sc0: fb0 kbd0 pcic: polling, can't alloc 0 pcic: polling, can't alloc 0 pcic0: <VLSI 82C146> on isa0 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: not probed (disabled) ppc: parallel port found at 0x378 ppc0: ECP SPP ECP+EPP SPP ppc0 at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port isa_probe_children: probing PnP devices BIOS Geometries: 0:0273ef3f 0..627=628 cylinders, 0..239=240 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached ata0: master: success setting up UDMA2 mode on PIIX4 chip ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 ad0: <FUJITSU MHH2048AT/B819> ATA-4 disk at ata0 as master ad0: 4645MB (9514260 sectors), 10068 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 Creating DISK ad0 Creating DISK wd0 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1: master: success setting up WDMA2 mode on PIIX4 chip acd0: <TOSHIBA CD-ROM XM-1902B/1A14> CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, DMA acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-RW 120mm data disc loaded, unlocked Mounting root from ufs:/dev/wd0s2a wd0s1: type 0x1b, start 63, end = 5004719, size 5004657 : OK wd0s2: type 0xa5, start 5004720, end = 9510479, size 4505760 : OK pccard: card inserted, slot 0 pccard: card inserted, slot 1 start_init: trying /sbin/init Linux-ELF exec handler installed devclass_alloc_unit: sio1 already exists, using next available unit number ep0: Pass 1 of 2 detection failed (nonfatal) ep0: <3Com 3C574B, Megahertz 3CCFE574BT or Fast Etherlink 3C574-TX> at port 0x240-0x25f irq 10 slot 1 on pccard0 ep0: Ethernet address 4b:57:4b:57:4b:57 bpf: ep0 attached --ELM944122599-84284-0_-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199912020816.AAA84343>