Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 3 Feb 2009 23:23:39 -0500
From:      Antonio Rieser <tonyrieser@gmail.com>
To:        Dominic Fandrey <kamikaze@bsdforen.de>
Cc:        rhurlin <rhurlin@gwdg.de>, Glen Barber <glen.j.barber@gmail.com>, freebsd-questions@freebsd.org, Vulpes Velox <v.velox@vvelox.net>
Subject:   Re: Graphics tablet / Xorg / mouse problems
Message-ID:  <58a2fd890902032023s24a58a3m51b1769a94ffb327@mail.gmail.com>
In-Reply-To: <4986BE9E.90905@bsdforen.de>
References:  <58a2fd890901311924s6bf36cb5w47d845d8d8090af8@mail.gmail.com> <4986BE9E.90905@bsdforen.de>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Hi,

Thanks a million for your help.  Many thanks to Bartosz, too!  Just to
be sure I understood how to deactivate hald, I ran (as root) the
command

chmod -x /usr/local/etc/rc.d/hald

which should prevent it from running in the future, then, for this session

pkill hald

That should do it, right?

Also, I reported earlier that everything seems to be normal if I boot
with the tablet plugged in, but that's not always true.  I now think
that if I log in and out enough I get the same error messages.

I have enclosed my Device Section of /etc/X11/Xorg.conf below.

All the best,

  Tony

---------------------------------

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "CacheLines"         	# <i>
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "XvMCSurfaces"       	# <i>
        #Option     "PageFlip"           	# [<bool>]
	Identifier  "Card0"
	Driver      "intel"
	VendorName  "Intel Corporation"
	BoardName   "82852/855GM Integrated Graphics Device"
	BusID       "PCI:0:2:0"
	Option      "Accel" "On"
EndSection


On Mon, Feb 2, 2009 at 4:36 AM, Dominic Fandrey <kamikaze@bsdforen.de> wrote:
> Antonio Rieser wrote:
>> Hi,
>>
>> I recently installed FreeBSD 7.1 on an ACER Aspire
>> 1680 laptop. I'm running KDE 3.5 and the most recent Xorg port with a
>> Wacom Bamboo tablet and the wacom driver from the ports collection.  I
>> have the following problems with the tablet and mouse: ...
>
> Just to keep you up to date, Bartosz is on it. Of course, I cannot give
> you a schedule. With the involvement of hald things seem to get much
> more complicated. It might be a temporary solution to deactivate
> hald support.
>
> Regards
>



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?58a2fd890902032023s24a58a3m51b1769a94ffb327>