Date: Mon, 1 Apr 2019 06:36:53 +0200 From: Michael Schuster <michaelsprivate@gmail.com> To: Mazandar Wiki <mazandar.wiki@gmail.com> Cc: freeBSD Mailing List <freebsd-questions@freebsd.org> Subject: Re: FreeBSD 12.0-RELEASE crashes during the boot process Message-ID: <CADqw_gKNxtqsMasM6hDFPV=NMgX821xGAjqgeLHW4erR6xzWPQ@mail.gmail.com> In-Reply-To: <CANx7MpfDQJEUsjo_SSYqnExagj30NAAD8cPYiR3mDZq_ztor8Q@mail.gmail.com> References: <CANx7MpfDQJEUsjo_SSYqnExagj30NAAD8cPYiR3mDZq_ztor8Q@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
you might get more feedback if you wrote something about the hardware you're using. regards Michael On Sat, Mar 30, 2019 at 10:15 PM Mazandar Wiki <mazandar.wiki@gmail.com> wrote: > I'm trying to boot FreeBSD from the installation media > (FreeBSD-12.0-RELEASE-amd64-memstick.img, written on an 8GB USB Flash Drive > by dd(1)). It crashes at the beginning of the boot process, right after > printing this message: > > ACPI APIC TABLE: <GBT GBTUACPI> > > In the verbose mode: > ACPI APIC TABLE: <GBT GBTUACPI> > L3 cache ID shift: 4 > L2 cache ID shift: 1 > L1 cache ID shift: 1 > Core ID shift: 1 > [crashes here and nothing works, I have to restart by hand] > > It sometimes works (and one time, I even managed to install it, though it > didn't work after the first reboot), but most often it crashes. I tried to > disable AHCI in the BIOS, but that didn't work either. Checksums are OK. > Other operating systems (including FreeBSD 9.0-RELEASE) work fine. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > -- Michael Schuster http://recursiveramblings.wordpress.com/ recursion, n: see 'recursion'
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADqw_gKNxtqsMasM6hDFPV=NMgX821xGAjqgeLHW4erR6xzWPQ>