Date: Sat, 20 Mar 1999 11:42:11 +0800 From: hawkkuan@tw.ibm.com To: questions@freebsd.org, hackers@freebsd.org Subject: !! Emergency !! Help FreeBSD 3.0 with IBM Netfinity 5000 Message-ID: <4825673A.00577C58.00@tw.ibm.com>
next in thread | raw e-mail | index | archive | help
Dear Freebsd core team and developers,
Recenlty IBM Taiwan had a large project to prompt FreeBSD in Taiwan
elementary
school. We use 600 sets IBM Netfinity 5000 server in this project.
We had some problems with IBM Netfinity 5000 with FreeBSD, The most
important
is that there is 2 set of PCI bridge of Netfinity 5000. When I installed
the netfinity 5000 and
use "dmesg" command. System can regonized all chip set on mainboard,
include 2 PCI bridge
chip set and 1 PCI-ISA bridge.
==== IBM Netfinity 5000 Bus Architecture ====
PCI bus 0 connected with on board AIC-7895, S3 Video chip & AMD
79cXXX NIC and
only "1" free PCI slot.
PCI bus 1 connected with 4 PCI slots , 2 of them are PCI/ISA share
slot.
====== The most problems we meet ======
All adaptor (we try Intel Ether express pro) only can be regonized on
PCI bus 0 , but
no matter what we have tried, we can't install any adaptor on PCI bus 1
slots!!
Could you help us!! We really wonna prompt FreeBSD on Taiwan market.
It need all
your help for this!!
Is there anyone tried install FreeBSD on multi PCI bus system(most
mid-high end PC
server desgined not just for 1 PCI bridge but more than 2 or 3 PCI bridge)?
Please help us!!
====dmesg message=======
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-RELEASE #1: Fri Mar 19 11:11:06 GMT 1999
root@hawk.tw.ibm.com:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz cost 5077 ns
Timecounter "TSC" frequency 349181049 Hz cost 147 ns
CPU: Pentium II (quarter-micron) (349.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 67108864 (65536K bytes)
avail memory = 62480384 (61016K bytes)
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1166 device=0007)> rev 0x04 on pci0.0.0
chip1: <Host to PCI bridge (vendor=1166 device=0005)> rev 0x02 on pci0.0.1
ahc0: <Adaptec aic7895 Ultra SCSI adapter> rev 0x04 int a irq 15 on
pci0.6.0
ahc0: aic7895 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> rev 0x04 int b irq 11 on
pci0.6.1
ahc1: aic7895 Wide Channel B, SCSI Id=7, 16/255 SCBs
lnc1: <PCNet/PCI Ethernet adapter> rev 0x33 int a irq 15 on pci0.9.0
lnc1: PCnet-FAST+ address 00:04:ac:b8:44:b3
vga0: <S3 Trio 64 graphics accelerator> rev 0x16 int a irq 11 on pci0.10.0
chip2: <PCI to ISA bridge (vendor=1166 device=0200)> rev 0x4d on pci0.15.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x4a int a irq 14 on
pci0.15.1
ide_pci: controller is simplex, no DMA on secondary channel
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model IntelliMouse, device ID 3
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <SANYO CD-ROM CRD-1332P/1.03>, removable, dma,
iordis
wcd0: 2406/5500Kb/sec, 128Kb cache, audio play, 256 volume levels,
ejectable tray
wcd0: no disc inside, unlocked
wdc1 not found at 0x170
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
cs0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
npx0 on motherboard
npx0: INT 16 interface
ahc0: Someone reset channel A
Waiting 15 seconds for SCSI devices to settle
Sending WDTR!
(probe15:ahc1:0:0:0): Sending SDTR!!
pass1 at ahc1 bus 0 target 14 lun 0
pass1: <SDR GEM200 2> Fixed Processor SCSI2 device
pass1: 3.300MB/s transfers
changing root device to da0s1a
da0 at ahc1 bus 0 target 0 lun 0
da0: <IBM DCHS04Y 2727> Fixed Direct Access SCSI2 device
da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 4303MB (8813870 512 byte sectors: 255H 63S/T 548C)
lnc1: Heartbeat error -- SQE test failed
lnc1: Loss of carrier during transmit -- Net error?
fd0c: hard error reading fsbn 0 (No status)
fd0c: hard error reading fsbn 0 (No status)
fd0c: hard error reading fsbn 0 (No status)
fd0c: hard error writing fsbn 4 of 4-6 (No status)
fd0c: hard error writing fsbn 13 of 13-15 (No status)
fd0c: hard error writing fsbn 21 (No status)
fd0c: hard error writing fsbn 1981 (No status)
===========
Best Regards,
Hawk Kuan ©x®¶µØ
Sales Specialist , PSG, IBM Taiwan, 206, Sec.1 Keelung Rd, Taipei, Taiwan,
R.O.C.
Tel:886-2-2725-9522, Pager:0959-316961, Mobile: 0936-945920
Notes ID: Hawk JH Kuan/Taiwan/IBM , E-Mail: hawkkuan@tw.ibm.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4825673A.00577C58.00>