Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 11 Jan 2001 17:27:06 -0600
From:      "Chuck Rock" <carock@epconline.net>
To:        <freebsd-isp@FreeBSD.ORG>
Subject:   RE: T1/DS1
Message-ID:  <002f01c07c26$02e8b320$1805010a@epconline.net>
In-Reply-To: <DBEIKNMKGOBGNDHAAKGNIEGCCNAA.dave@hawk-systems.com>

next in thread | previous in thread | raw e-mail | index | archive | help
We've got a 4' x 4' x 3/4" piece of plywood mounted on the wall. It's
painted black, and mounted into our concrete wall with four anchors. It's
mounted in our building where the fiber comes in from outside.

No big deal, they just need a dedicated area for their equipment. All of
this equipment is their property, and they have these specifications for
putting at your location.

We've got an OC-3 which is fiber, and some T1's. The T1's use a "smart jack"
which is basically a  router type piece of equipment that converts the
signal on the T1 to a signal your CSU/DSU can handle. Our fiber has a
patchpanel where each of the fibers come in from outside to a jack on this
panel, then they run that from the jack into our router. That patch panel is
their equipment too.

If you go into any businesses that have a phone system, or a lot of phone
lines, you'll see a similar thing on their wall where all the phone
equipment and patchpanels are.

Chuck

> -----Original Message-----
> From: owner-freebsd-isp@FreeBSD.ORG
> [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Dave VanAuken
> Sent: Thursday, January 11, 2001 5:00 PM
> To: freebsd-isp@FreeBSD.ORG
> Subject: RE: T1/DS1
>
>
> Probably having diffuculty (or not bothering to) obtaining copper in
> your area, and instead laid fibre to the area(or bought fibre).  They
> terminate the fibre at both ends, provision a DS1 signal over it and
> voila, you have a T-1.
>
> This was commonly done with T3(DS3) installations, but with the DSL
> craze, getting copper lines has become difficult, thus the move to
> provision fibre and cut bell out of the loop.  If you can get the
> fibre in cheaply enough, having a customer pay for a copper DS1 with
> local loop and pocketing all the cash to pay for your fibre
> infrastructure instead of paying a bell is a good business model.
>
> Dave
>
> -----Original Message-----
> From: owner-freebsd-isp@FreeBSD.ORG
> [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Jan Knepper
> Sent: Thursday, January 11, 2001 5:26 PM
> To: freebsd-isp@FreeBSD.ORG
> Subject: T1/DS1
>
>
> Hi,
>
> I ordered a T1 quite a while ago and now Verizon seems to come around
> the corner and finally install the connection, however...
>
> I need a 4 ft square panel on the wall so they can mount a couple of
> things:
> -    Fiber Cable Termination
> -    Soneplex Equip
> -    Smart Jack Shelf
> -    Rectifier Cabinet
> -    Battery Cabinet
>
> Also their instruction paper says: "Requirements for DS-1 Service via
> Fiber"
>
> Since I don't have that much experience I am beginning to wonder what
> is
> going on.
>
> Can any of you shed any light?
>
> Thanks!
> Jan
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-isp" in the body of the message
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-isp" in the body of the message
>



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isp" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002f01c07c26$02e8b320$1805010a>