Date: Sun, 21 Sep 2003 14:53:30 +0100 From: Stacey Roberts <stacey@vickiandstacey.com> To: supraexpress@globaleyes.net Cc: FreeBSD Gnome <freebsd-gnome@FreeBSD.ORG> Subject: Re: portupgrade -rf -m BATCH=yes atk repeatably fails Message-ID: <1064152409.80730.8.camel@localhost> In-Reply-To: <B0186522091@mercury.ll.net> References: <B0186522091@mercury.ll.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello,
Thanks for taking the time to repond.
On Sun, 2003-09-21 at 13:01, supraexpress@globaleyes.net wrote:
> I don't know what the cause of the problem is, but in most cases where a
> package installation fails after the newer version has been built, I
> simple "pkg_delete -f" the OLD version (gnome2-2.2.2_2 in this case),
> and then do a manual "make install" from the ports directory of the NEW
> version (/usr/ports/x11/gnome2 in this case). This then completes the
> entire process and the OLD version is successfully replaced by the NEW
> version.
>
Normally, I'd agree with this.., however there are other posts on
gnome@freebsd.org with folks having problems with fresh installations of
Gnome-2.4 as well.
This is my third failure (having had the maintainer recommending to "try
it again" after the second PR I submitted) here.., and I'd prefer to
wait until the maintainer comes back with a suggestion or two.
Thanks again.
Regards,
Stacey
>
> On 21 Sep, Stacey Roberts wrote:
> >
> >>Submitter-Id: current-users
> >>Originator: Stacey Roberts
> >>Organization:
> >>Confidential: no
> >>Synopsis: portupgrade -rf -m BATCH=yes atk repeatably fails
> >>Severity: critical
> >>Priority: high
> >>Category: ports
> >>Class: sw-bug
> >>Release: FreeBSD 4.8-RC i386
> >>Environment:
> > System: FreeBSD Demon.vickiandstacey.com 4.8-RC FreeBSD 4.8-RC #0: Sat Mar 22 12:10:35 GMT 2003 root@Demon.vickiandstacey.com:/usr/obj/usr/src/sys/HAMMER i386
> >
> >>Description:
> > For the second time, my attempts at following the instructions laid out by the FreeBSD-Gnome maintainer in order to portupgrade Gnome-2.2.x to Gnome-2.4 fails. Always the same command, and always after several hours ofa what appears to be repeated reinstallation of Gnome-related components.
> >
> > The command I am up to at the moment is:
> >
> > portupgrade -rf -m BATCH=yes atk
> >
> > Here is the tail of the latest failure:
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > /bin/sh ./mkinstalldirs /usr/X11R6/share/gnome/nautilus-cd-burner
> > mkdir /usr/X11R6/share/gnome/nautilus-cd-burner
> > install -c -o root -g wheel -m 444 ./cdburn.glade /usr/X11R6/share/gnome/nautilus-cd-burner/cdburn.glade
> > install -c -o root -g wheel -m 444 ./cdspin1.png /usr/X11R6/share/gnome/nautilus-cd-burner/cdspin1.png
> > install -c -o root -g wheel -m 444 ./cdspin2.png /usr/X11R6/share/gnome/nautilus-cd-burner/cdspin2.png
> > install -c -o root -g wheel -m 444 ./cdspin3.png /usr/X11R6/share/gnome/nautilus-cd-burner/cdspin3.png
> > install -c -o root -g wheel -m 444 ./cdspin4.png /usr/X11R6/share/gnome/nautilus-cd-burner/cdspin4.png
> > install -c -o root -g wheel -m 444 ./cdspin5.png /usr/X11R6/share/gnome/nautilus-cd-burner/cdspin5.png
> > install -c -o root -g wheel -m 444 ./cdspin6.png /usr/X11R6/share/gnome/nautilus-cd-burner/cdspin6.png
> > install -c -o root -g wheel -m 444 ./cdspin7.png /usr/X11R6/share/gnome/nautilus-cd-burner/cdspin7.png
> > install -c -o root -g wheel -m 444 ./cdspin8.png /usr/X11R6/share/gnome/nautilus-cd-burner/cdspin8.png
> > /bin/sh ./mkinstalldirs /usr/X11R6/etc/gnome-vfs-2.0/modules
> > install -c -o root -g wheel -m 444 ./mapping-modules.conf /usr/X11R6/etc/gnome-vfs-2.0/modules/mapping-modules.conf
> > /bin/sh ./mkinstalldirs /usr/X11R6/libdata/bonobo/servers
> > install -c -o root -g wheel -m 444 ./Nautilus_CD_Burner_Context_Menu.server /usr/X11R6/libdata/bonobo/servers/Nautilus_CD_Burner_Context_Menu.server
> > gmake[2]: Leaving directory `/usr/ports/sysutils/nautilus-cd-burner/work/nautilus-cd-burner-0.5.3'
> > gmake[1]: Leaving directory `/usr/ports/sysutils/nautilus-cd-burner/work/nautilus-cd-burner-0.5.3'
> > ======================================================================
> > In order to use nautilus-cd-burner, you must make sure your CD devices
> > have the correct permissions. You must also make sure you have:
> >
> > device atapicam
> >
> > Configured in your kernel if you are using an ATAPI CD/DVD writer.
> > To figure out which CD/DVD drive you will be using, run the following
> > command as root:
> >
> > camcontrol devlist
> >
> > Your output will look similar to the following:
> >
> > <CREATIVE CD5233E-N 0.20> at scbus1 target 0 lun 0 (cd0,pass0)
> >
> > The devices in parantheses at the end are important. You must make sure
> > the /dev entries for those devices are writable by the users that will
> > be using nautilus-cd-burner. In addition to those devices, /dev/xpt*
> > must also be writable to your nautilus-cd-burner users.
> > ======================================================================
> > ===> Registering installation for nautilus-cd-burner-0.5.3
> > ===> SECURITY REPORT:
> > This port has installed the following files which may act as network
> > servers and may therefore pose a remote security risk to the system.
> > /usr/X11R6/libexec/mapping-daemon
> >
> > If there are vulnerabilities in these programs there may be a security
> > risk to the system. FreeBSD makes no guarantee about the security of
> > ports included in the Ports Collection. Please type 'make deinstall'
> > to deinstall the port if this is a concern.
> > ===> Cleaning for unzip-5.50_2
> > ===> Cleaning for esound-0.2.32
> > ===> Cleaning for libaudiofile-0.2.3
> > ===> Cleaning for libiconv-1.9.1_1
> > ===> Cleaning for ORBit2-2.8.1
> > ===> Cleaning for atk-1.4.0
> > ===> Cleaning for autoconf-2.53_1
> > ===> Cleaning for automake-1.5,1
> > ===> Cleaning for bison-1.75_1
> > ===> Cleaning for fam-2.6.9_3
> > ===> Cleaning for gconf2-2.4.0.1
> > ===> Cleaning for gettext-0.12.1
> > ===> Cleaning for glib-2.2.3
> > ===> Cleaning for gmake-3.80_1
> > ===> Cleaning for gnomevfs2-2.4.0
> > ===> Cleaning for imake-4.3.0_1
> > ===> Cleaning for libIDL-0.8.2
> > ===> Cleaning for libbonobo-2.4.0
> > ===> Cleaning for libglade2-2.0.1_1
> > ===> Cleaning for libgnugetopt-1.2
> > ===> Cleaning for libgsf-1.8.1
> > ===> Cleaning for libtool-1.3.5_1
> > ===> Cleaning for m4-1.4_1
> > ===> Cleaning for pkgconfig-0.15.0
> > ===> Cleaning for popt-1.6.4_1
> > ===> Cleaning for jpeg-6b_1
> > ===> Cleaning for libart_lgpl2-2.3.16
> > ===> Cleaning for libgnomecanvas-2.4.0
> > ===> Cleaning for librsvg2-2.4.0
> > ===> Cleaning for png-1.2.5_2
> > ===> Cleaning for tiff-3.5.7_1
> > ===> Cleaning for python-2.3_1
> > ===> Cleaning for gnome-icon-theme-1.0.9
> > ===> Cleaning for gnomehier-1.0_8
> > ===> Cleaning for gnomemimedata-2.4.0
> > ===> Cleaning for help2man-1.29
> > ===> Cleaning for linc-1.0.3
> > ===> Cleaning for freetype2-2.1.4_1
> > ===> Cleaning for cdrtools-2.0.3
> > ===> Cleaning for mkisofs-2.0.3
> > ===> Cleaning for docbook-sk-4.1.2
> > ===> Cleaning for docbook-xml-4.2_1
> > ===> Cleaning for docbook-xsl-1.61.3_1
> > ===> Cleaning for expat-1.95.6_1
> > ===> Cleaning for intltool-0.27.2
> > ===> Cleaning for libxml2-2.5.11
> > ===> Cleaning for libxslt-1.0.33
> > ===> Cleaning for py23-expat-2.3_2
> > ===> Cleaning for scrollkeeper-0.3.12_2,1
> > ===> Cleaning for sdocbook-xml-4.1.2.5_1
> > ===> Cleaning for xmlcatmgr-0.2_1
> > ===> Cleaning for nautilus2-2.4.0
> > ===> Cleaning for XFree86-fontEncodings-4.3.0
> > ===> Cleaning for XFree86-fontScalable-4.3.0
> > ===> Cleaning for Xft-2.1.2
> > ===> Cleaning for fontconfig-2.2.90_3
> > ===> Cleaning for eel2-2.4.0
> > ===> Cleaning for gail-1.4.0
> > ===> Cleaning for gtk-engines2-2.2.0
> > ===> Cleaning for gtk-2.2.4
> > ===> Cleaning for libbonoboui-2.4.0
> > ===> Cleaning for libgnomeui-2.4.0.1_1
> > ===> Cleaning for pango-1.2.5
> > ===> Cleaning for XFree86-clients-4.3.0_3
> > ===> Cleaning for XFree86-libraries-4.3.0_6
> > ===> Cleaning for gnomedesktop-2.4.0
> > ===> Cleaning for libgnome-2.4.0
> > ===> Cleaning for startup-notification-0.5_1
> > ===> Cleaning for nautilus-cd-burner-0.5.3
> > ---> Cleaning out obsolete shared libraries
> > [Updating the pkgdb <format:bdb1_btree> in /var/db/pkg ... - 308 packages found (-0 +1) . done]
> > ** The following packages were not installed or upgraded (*:skipped / !:failed)
> > ! x11/gnome2 (gnome2-2.2.2_2) (install error)
> > #
> >
> >>How-To-Repeat:
> > Cvsup ports tree
> > Run portupgrade ORBit2 libbonobo
> > Run portupgrade -rf -m BATCH=yes atk
> >
> > After many hours, failure is now almost assured - see above.
> >
> >>Fix:
> > Don't know
> > _______________________________________________
> > freebsd-gnome@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome
> > To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org"
--
Stacey Roberts
B.Sc (HONS) Computer Science
Web: www.vickiandstacey.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1064152409.80730.8.camel>