Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 15 Oct 2002 17:27:04 -0700
From:      "Ian Cartwright" <>
To:        <>
Subject:   Logitech iTouch Cordless Desktop
Message-ID:  <000001c274aa$c0b2f090$6600a8c0@iansxp>

Next in thread | Raw E-Mail | Index | Archive | Help
This is a multi-part message in MIME format.

Content-Type: text/plain;
Content-Transfer-Encoding: 7bit


I have been trying to get a Logitech Cordless Desktop to work with
FreeBSD without success.

The cordless desktop consists of:
1) Cordless Keyboard model number Y-RE20
2) Cordless Mouse model number M-RR63
3) RF Receiver for Keyboard and Mouse model number C-BD9-DUAL

The receiver has a USB cable and a PS/2 cable. If I do not plug the PS/2
cable into my computer I cannot use the keyboard at all past the FreeBSD
BootMgr. With the PS/2 cable plugged in, I can use the keyboard to do
all the normal things (login, command line, etc.), but the mouse doesn't
seem to work at all. There are devices detected for ukbd0 and ums0 and
the appropriate daemons are launched (usbd and moused).

Is there any supportfor this hardware in FreeBSD as of 4.7-RELEASE? I
would be eager to help anyone currently working on support for this
hardware if not...


Ian Cartwright

Enclosed is output from dmesg.

Content-Type: text/plain;
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;

Copyright (c) 1992-2002 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
	The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.7-RELEASE #0: Wed Oct  9 15:08:34 GMT 2002=0A=
Timecounter "i8254"  frequency 1193182 Hz=0A=
CPU: AMD Athlon(tm) MP (1106.09-MHz 686-class CPU)=0A=
  Origin =3D "AuthenticAMD"  Id =3D 0x662  Stepping =3D 2=0A=
  AMD Features=3D0xc0480000<<b19>,AMIE,DSP,3DNow!>=0A=
real memory  =3D 536805376 (524224K bytes)=0A=
avail memory =3D 517128192 (505008K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc050f000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
Using $PIR table, 9 entries at 0xc00fded0=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <Host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib1: <PCI to PCI bridge (vendor=3D1106 device=3Db099)> at device 1.0 =
on pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11=0A=
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xc000-0xc03f irq 10 at =
device 9.0 on pci0=0A=
xl0: Ethernet address: 00:60:08:46:d8:8f=0A=
miibus0: <MII bus> on xl0=0A=
nsphy0: <DP83840 10/100 media interface> on miibus0=0A=
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
pci0: <unknown card> (vendor=3D0x104c, dev=3D0x8020) at 10.0 irq 5=0A=
pci0: <unknown card> (vendor=3D0x1013, dev=3D0x6003) at 11.0 irq 12=0A=
isab0: <PCI to ISA bridge (vendor=3D1106 device=3D3147)> at device 17.0 =
on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <VIA 8233 ATA133 controller> port 0xd800-0xd80f at device 17.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 12 at device =
17.2 on pci0=0A=
usb0: <VIA 83C572 USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhub1: Genesys Logic USB Hub, class 9/0, rev 1.01/0.05, addr 2=0A=
uhub1: 4 ports with 4 removable, bus powered=0A=
uhid0: American Power Conversion Back-UPS LS 700 FW:19.b2 .D USB FW:b2 , =
rev 1.10/1.06, addr 3, iclass 3/0=0A=
uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 4=0A=
uhub2: 4 ports with 4 removable, self powered=0A=
ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 5, iclass 7/1=0A=
ukbd0: Logitech USB Receiver, rev 1.10/13.10, addr 6, iclass 3/1=0A=
kbd1 at ukbd0=0A=
ums0: Logitech USB Receiver, rev 1.10/13.10, addr 6, iclass 3/1=0A=
ums0: 5 buttons and Z dir.=0A=
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 12 at device =
17.3 on pci0=0A=
usb1: <VIA 83C572 USB controller> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub3: 2 ports with 2 removable, self powered=0A=
orm0: <Option ROM> at iomem 0xcc000-0xd3fff on isa0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
fd1: <1200-KB 5.25" drive> on fdc0 drive 1=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1: configured irq 3 not in bitmap of probed irqs 0=0A=
ppc0: parallel port not found.=0A=
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100=0A=
acd0: CD-RW <24X10> at ata1-master PIO4=0A=
acd1: CDROM <CD-ROM Drive/F5E> at ata1-slave PIO4=0A=
Mounting root from ufs:/dev/ad0s2a=0A=


To Unsubscribe: send mail to
with "unsubscribe freebsd-hackers" in the body of the message

Want to link to this message? Use this URL: <$c0b2f090$6600a8c0>