From owner-freebsd-net@FreeBSD.ORG Tue Nov 25 13:28:59 2008 Return-Path: Delivered-To: freebsd-net@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 998871065675 for ; Tue, 25 Nov 2008 13:28:59 +0000 (UTC) (envelope-from janm@transactionware.com) Received: from mail.transactionware.com (mail.transactionware.com [203.14.245.7]) by mx1.freebsd.org (Postfix) with SMTP id B51BF8FC18 for ; Tue, 25 Nov 2008 13:28:58 +0000 (UTC) (envelope-from janm@transactionware.com) Received: (qmail 57119 invoked from network); 25 Nov 2008 13:02:38 -0000 Received: from midgard.transactionware.com (192.168.1.55) by dm.transactionware.com with SMTP; 25 Nov 2008 13:02:38 -0000 Received: (qmail 15696 invoked by uid 907); 25 Nov 2008 13:02:15 -0000 Received: from midgard.transactionware.com (HELO STUDYPC) (192.168.1.55) by midgard.transactionware.com (qpsmtpd/0.32) with ESMTP; Wed, 26 Nov 2008 00:02:15 +1100 From: "Jan Mikkelsen" To: Date: Wed, 26 Nov 2008 00:02:15 +1100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.6838 Importance: Normal Thread-Index: AclO/goGdpiqsKM6SF+gYAp9rnGDxQ== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579 Subject: [em] 7.1-PRE, one em port works, one fails, no problem on 6.3-p1 X-BeenThere: freebsd-net@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Networking and TCP/IP with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Nov 2008 13:28:59 -0000 Hi, On a machine with a Supermicro X7DB8 board I get this error on startup: em1: port 0x3020-0x303f mem = 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6 em1: Using MSI interrupt em1: Hardware Initialization Failed em1: Unable to initialize the hardware device_attach: em1 attach returned 5 There is no management card in this particular machine, and em0 on the = same motherboard is fine. I can see a few similar problems in the archives, = but I don't see a definitive solution. The same machine runs fine with = 6.3-p1. Dmesg below. Any suggestions? Thanks, Jan Mikkelsen Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-PRERELEASE #0: Tue Nov 25 10:07:25 EST 2008 =20 root@dm.transactionware.com:/home/janm/p4/freebsd-image-std-2008.2/work/b= ase -freebsd/home/janm/p4/freebsd-image-std-2008.2/FreeBSD/src/sys/TW-SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5140 @ 2.33GHz (2333.35-MHz = K8-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6f6 Stepping =3D 6 =20 Features=3D0xbfebfbff =20 Features2=3D0x4e3bd AMD Features=3D0x20100800 AMD Features2=3D0x1 Cores per package: 2 usable memory =3D 4280651776 (4082 MB) avail memory =3D 4117843968 (3927 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, = RF5413) acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 2.0 on pci0 pci1: on pcib1 pcib2: irq 16 at device 0.0 on pci1 pci2: on pcib2 pcib3: irq 16 at device 0.0 on pci2 pci3: on pcib3 pcib4: at device 0.0 on pci3 pci4: on pcib4 ahd0: port 0x2400-0x24ff,0x2000-0x20ff mem 0xd8500000-0xd8501fff irq 16 at device = 2.0 on pci4 ahd0: [ITHREAD] aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI-X 67-100Mhz, 512 SCBs ahd1: port 0x2c00-0x2cff,0x2800-0x28ff mem 0xd8502000-0xd8503fff irq 17 at device = 2.1 on pci4 ahd1: [ITHREAD] aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI-X 67-100Mhz, 512 SCBs pcib5: at device 0.2 on pci3 pci5: on pcib5 bge0: mem 0xd8600000-0xd860ffff irq 16 at device 1.0 on pci5 miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:40:f4:66:b1:56 bge0: [ITHREAD] pcib6: irq 18 at device 2.0 on pci2 pci6: on pcib6 em0: port 0x3000-0x301f mem 0xd8400000-0xd841ffff irq 18 at device 0.0 on pci6 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:30:48:31:67:86 em1: port 0x3020-0x303f mem 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6 em1: Using MSI interrupt em1: Hardware Initialization Failed em1: Unable to initialize the hardware device_attach: em1 attach returned 5 pcib7: at device 0.3 on pci1 pci7: on pcib7 pcib8: at device 4.0 on pci0 pci8: on pcib8 pcib9: at device 6.0 on pci0 pci9: on pcib9 pcib10: at device 0.0 on pci9 pci10: on pcib10 arcmsr0: mem 0xd8900000-0xd8900fff,0xd8000000-0xd83fffff irq 16 at device 14.0 = on pci10 ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07=20 ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13=20 arcmsr0: [ITHREAD] pcib11: at device 0.2 on pci9 pci11: on pcib11 pcib12: irq 17 at device 28.0 on pci0 pci12: on pcib12 uhci0: port = 0x1800-0x181f irq 17 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port = 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port = 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xd8c00000-0xd8c003ff irq = 17 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: on usb3 uhub3: 6 ports with 6 removable, self powered pcib13: at device 30.0 on pci0 pci13: on pcib13 vgapci0: port 0x4000-0x40ff mem 0xd0000000-0xd7ffffff,0xd8800000-0xd880ffff irq 18 at device 1.0 on = pci13 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: on atapci0 ata0: [ITHREAD] pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on = acpi0 fdc0: [FILTER] ppc0: port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: on ppc0 ppbus0: [ITHREAD] plip0: on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] cpu0: on acpi0 est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est0 attach returned 6 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est1 attach returned 6 p4tcc1: on cpu1 cpu2: on acpi0 est2: on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est2 attach returned 6 p4tcc2: on cpu2 cpu3: on acpi0 est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est3 attach returned 6 p4tcc3: on cpu3 orm0: at iomem 0xc0000-0xcafff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 Timecounters tick every 1.000 msec acd0: DVDR at ata0-master UDMA66 Waiting 5 seconds for SCSI devices to settle (probe46:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step da0 at arcmsr0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-5 device=20 da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da0: 77247MB (158201856 512 byte sectors: 255H 63S/T 9847C) da1 at arcmsr0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-5 device=20 da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da1: 953673MB (1953122304 512 byte sectors: 255H 63S/T 121576C) da2 at arcmsr0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-5 device=20 da2: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da2: 800131MB (1638669312 512 byte sectors: 255H 63S/T 102002C) sa0 at ahd1 bus 0 target 6 lun 0 sa0: Removable Sequential Access SCSI-2 device=20 sa0: 10.000MB/s transfers (10.000MHz, offset 15) SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Trying to mount root from ufs:/dev/da0s1a This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 6 ZFS storage pool version 6 em0: link state changed to UP bge0: link state changed to UP