Date: Mon, 13 Aug 2001 21:43:45 +0300 From: =?iso-8859-1?Q?Esa_K=E4rkk=E4inen?= <ejk@iki.fi> To: freebsd-stable@FreeBSD.ORG Subject: sym0: unexpected disconnect errors Message-ID: <20010813214345.A415@pp.htv.fi>
next in thread | raw e-mail | index | archive | help
--E39vaYmALEf/7YXx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi
For some reason I get following error messages while doing
moderate disk I/O, like "make -j 16 buildworld" for example.
(da1:sym0:0:1:0): phase change 6-7 3@37092b8c resid=2.
(da1:sym0:0:1:0): M_REJECT received (1:80).
sym0: unexpected disconnect
da1 contains following filesystems:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/da1s1a 5972391 3409223 2085377 62% /home
/dev/da1s1e 508143 287619 179873 62% /usr/src
/dev/da1s1f 508143 349557 117935 75% /usr/obj
/dev/da1s1g 99183 11091 80158 12% /usr/sup
/dev/da1s1h 1524463 593661 808845 42% /usr/ports
--
"In the beginning the Universe was created. This has made a lot of
people very angry and been widely regarded as a bad move."
-- Douglas Adams 1952 - 2001
--E39vaYmALEf/7YXx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg-v.2001-08-13"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-PRERELEASE #0: Mon Aug 13 20:43:30 EEST 2001
root@hostname.doma.in:/usr/obj/usr/src/sys/HOSTNAME
Calibrating clock(s) ... TSC clock: 751632336 Hz, i8254 clock: 1193067 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (751.71-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1073741824 (1048576K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00378000 - 0x3fff7fff, 1070071808 bytes (261248 pages)
avail memory = 1042481152 (1018048K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 15
IOAPIC #0 intpin 18 -> irq 11
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fae20
bios32: Entry = 0xfb290 (c00fb290) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb2c0
pnpbios: Found PnP BIOS data at 0xc00fbcc0
pnpbios: Entry = f0000:bcf0 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc034f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcib-: pcib0 exists, using next available unit number
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1106, dev=0x0691, revid=0xc4
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d0000000, size 26
found-> vendor=0x1106, dev=0x8598, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1106, dev=0x0596, revid=0x23
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x10
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000e000, size 4
found-> vendor=0x1106, dev=0x3038, revid=0x11
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=0
map[20]: type 1, range 32, base 0000e400, size 5
found-> vendor=0x1106, dev=0x3050, revid=0x30
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1000, dev=0x000c, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[10]: type 1, range 32, base 0000e800, size 8
map[14]: type 1, range 32, base da100000, size 8
map[18]: type 1, range 32, base da102000, size 12
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base da101000, size 12
map[14]: type 1, range 32, base 0000ec00, size 6
map[18]: type 1, range 32, base da000000, size 20
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x102b, dev=0x0525, revid=0x04
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[10]: type 1, range 32, base d4000000, size 25
map[14]: type 1, range 32, base d6000000, size 14
map[18]: type 1, range 32, base d7000000, size 23
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 15
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <VIA Apollo ATA controller> (vendor=0x1106, dev=0x0571) at 7.1
pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 7.2 irq 0
sym0: <895> port 0xe800-0xe8ff mem 0xda102000-0xda102fff,0xda100000-0xda1000ff irq 15 at device 16.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xec00-0xec3f mem 0xda000000-0xda0fffff,0xda101000-0xda101fff irq 11 at device 18.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:90:27:4f:e4:d9
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Chip Type: 0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pci-: pci1 exists, using next available unit number
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
Trying Read_Port at 203
CTL0043: start dependant
CTL0043: adding irq mask 0x20
CTL0043: adding dma mask 0x2
CTL0043: adding dma mask 0x8
CTL0043: adding io range 0x220-0x22f, size=0x10, align=0x1
CTL0043: adding io range 0x330-0x331, size=0x2, align=0x1
CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: adding io range 0x300-0x331, size=0x2, align=0x10
CTL0043: adding io range 0x388-0x397, size=0x4, align=0x4
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: end dependant
CTL7005: start dependant
CTL7005: adding io range 0x201-0x201, size=0x1, align=0x1
CTL7005: start dependant
CTL7005: adding io range 0x200-0x20f, size=0x1, align=0x1
CTL7005: end dependant
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff,0xca000-0xcafff on isa0
joy0 at port 0x201 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x61 0x71 0x61 0x61
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x61 0x69 0x61 0x61
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
isa_probe_children: probing PnP devices
sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,3 on isa0
sbc0: setting card to irq 5, drq 1, 3
pcm0: <SB16 DSP 4.16 (ViBRA16X)> on sbc0
pcm: setmap 4000, 1000; 0xdd088000 -> 4000
pcm: setmap 5000, 1000; 0xdd089000 -> 5000
joy1: <Generic PnP Joystick> at port 0x200 on isa0
SMP: enabled INTs: 1, 3, 4, 5, 6, 11, 12, 15, apic_imen: 0x00ff6785
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03ff1212 0..1023=1024 cylinders, 0..18=19 heads, 1..18=18 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
(probe2:sym0:0:2:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe2:sym0:0:2:0): ILLEGAL REQUEST asc:24,0
(probe2:sym0:0:2:0): Invalid field in CDB
Creating DISK da0
Creating DISK da1
sa0 at sym0 bus 0 target 3 lun 0
sa0: <Quantum DLT4000 CD4B> Removable Sequential Access SCSI-2 device
sa0: Serial Number JF84505333
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
Creating DISK cd0
pass0 at sym0 bus 0 target 0 lun 0
pass0: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device
pass0: Serial Number RE2L3778
pass0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
pass1 at sym0 bus 0 target 1 lun 0
pass1: <COMPAQ BB00921B91 3B05> Fixed Direct Access SCSI-2 device
pass1: Serial Number 3AL0DSSV00001005091T
pass1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
pass2 at sym0 bus 0 target 2 lun 0
pass2: <PLEXTOR CD-ROM PX-32TS 1.01> Removable CD-ROM SCSI-2 device
pass2: 20.000MB/s transfers (20.000MHz, offset 15)
pass3 at sym0 bus 0 target 3 lun 0
pass3: <Quantum DLT4000 CD4B> Removable Sequential Access SCSI-2 device
pass3: Serial Number JF84505333
pass3: 10.000MB/s transfers (10.000MHz, offset 15)
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ BB00921B91 3B05> Fixed Direct Access SCSI-2 device
da1: Serial Number 3AL0DSSV00001005091T
da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s1a
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device
da0: Serial Number RE2L3778
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
da0s1: type 0xa5, start 63, end = 17848214, size 17848152 : OK
start_init: trying /sbin/init
da1s1: type 0xa5, start 0, end = 17773523, size 17773524 : OK
da1s1: type 0xa5, start 0, end = 17773523, size 17773524 : OK
da1s1: type 0xa5, start 0, end = 17773523, size 17773524 : OK
da1s1: type 0xa5, start 0, end = 17773523, size 17773524 : OK
da1s1: type 0xa5, start 0, end = 17773523, size 17773524 : OK
da1s1: type 0xa5, start 0, end = 17773523, size 17773524 : OK
Linux-ELF exec handler installed
(cd0:sym0:0:2:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:sym0:0:2:0): NOT READY asc:3a,0
(cd0:sym0:0:2:0): Medium not present
cd0 at sym0 bus 0 target 2 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.01> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
--E39vaYmALEf/7YXx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="kernel.config.2001-08-13"
% strings /kernel | egrep "^___" | sed -e 's/^___//'
#
# HOSTNAME
#
machine i386
#cpu I386_CPU
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident STRUMF
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
#options MFS #Memory Filesystem
#options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
#options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=1000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device isa
#device eisa
device pci
# Omat viritykset
options INCLUDE_CONFIG_FILE
device pcm
device joy0 at isa? port IO_GAME
options TCP_DROP_SYNFIN
#options TCP_RESTRICT_RST
options SOFTUPDATES
options AHC_ALLOW_MEMIO
#options IPFIREWALL
#options IPFIREWALL_VERBOSE
#options IPFIREWALL_VERBOSE_LIMIT=50
options ICMP_BANDLIM
#options IPDIVERT
#device smbus
#device intpm
#device smb
options USER_LDT
device agp
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
# ATA and ATAPI devices
#device ata0 at isa? port IO_WD1 irq 14
#device ata1 at isa? port IO_WD2 irq 15
#device ata
#device atadisk # ATA disk drives
#device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
#options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc0 # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Teckram DC-390(T))
#device dpt # DPT Smartcache - See LINT for options!
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
device sym0 # NCR/Symbios Logic (newer chipsets)
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
# SCSI peripherals
device scbus0 at sym0 bus 0
device da0 at scbus0 target 0 unit 0
device da1 at scbus0 target 1 unit 0
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# RAID controllers
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
#device card
#device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
#device sio2 at isa? disable port IO_COM3 irq 5
#device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
#device ppc0 at isa? irq 7
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device tx # SMC 9432TX (83c170 ``EPIC'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device dc # DEC/Intel 21143 and various workalikes
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
#device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device fe0 at isa? port 0x300
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 irq 10 drq 0
#device cs0 at isa? port 0x300
#device sn0 at isa? port 0x300 irq 10
# requires PCCARD (PCMCIA) support to be activated
#device xe0 at isa?
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
#pseudo-device sl 1 # Kernel SLIP
#pseudo-device ppp 1 # Kernel PPP
#pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
#pseudo-device gif 4 # IPv6 and IPv4 tunneling
#pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf 10 #Berkeley packet filter
#pseudo-device vn 5 #Vnode driver (turns a file into a device)
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
--E39vaYmALEf/7YXx--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010813214345.A415>