Date: Sun, 20 Apr 2008 20:45:51 -0700 From: Nate Lawson <nate@root.org> To: Zbigniew Baniewski <zb@ispid.com.pl> Cc: freebsd-acpi@freebsd.org Subject: Re: Problem with ACPI using Abit BE6-II V2.0 Message-ID: <480C0DEF.2030707@root.org> In-Reply-To: <20080420134236.GA6019@sarge.my.own.domain.no-net> References: <20080420134236.GA6019@sarge.my.own.domain.no-net>
next in thread | previous in thread | raw e-mail | index | archive | help
That's a really old board, Pentium 2-400. I would not use acpi with it, just boot with acpi disabled. Zbigniew Baniewski wrote: > According to tips found on > http://www.freebsd.org/doc/en/books/handbook/acpi-debug.html > I'm sending a report about problems when trying to use ACPI on Abit BE6-II > V2.0, FreeBSD 7.0. > > > When ACPI is enabled - and I've enabled it during installation - the most > noticeable inconveniences are: > > 1. There's no top's "CPU states" anymore; all the output in that line is > zeroed. The same when trying to use htop or gkrellm - no possibility to > watch the CPU load. > > 2. There are steady problems with responsitivity of the system; even the > loading of the application of moderate size (like Firefox) always are > causing "momentary freezes" (f.e. mouse cursor can't be moved for a while). > > 3. When booted with "verbose", there are steadily error messages printed on > first console: > > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > > > None of the problems described above, when ACPI has been disabled. > > Link to ACPI Source Language file: > > ftp://ftp.ispid.com.pl/free/zb-abitbe6ii.asl > > --------------- dmesg output with ACPI enabled ---------------------- > > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.0-RELEASE #2: Sat Apr 19 20:53:27 CEST 2008 > root@sarge.my.own.domain.no-net:/usr/obj/usr/src/sys/SARGE > Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f3000. > Preloaded elf module "/boot/kernel/snd_emu10kx.ko" at 0xc09f3160. > Preloaded elf module "/boot/kernel/sound.ko" at 0xc09f3210. > Preloaded elf module "/boot/kernel/bktr.ko" at 0xc09f32bc. > Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc09f3368. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09f3418. > Calibrating clock(s) ... i8254 clock: 1193348 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 400911913 Hz > CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x652 Stepping = 2 > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > > Instruction TLB: 4 KB pages, 4-way set associative, 32 entries > Instruction TLB: 4 MB pages, fully associative, 2 entries > Data TLB: 4 KB pages, 4-way set associative, 64 entries > 2nd-level cache: 512 KB, 4-way set associative, 32 byte line size > 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size > Data TLB: 4 MB Pages, 4-way set associative, 8 entries > 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size > real memory = 268369920 (255 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000000c25000 - 0x000000000fb2dfff, 250646528 bytes (61193 pages) > avail memory = 253034496 (241 MB) > bios32: Found BIOS32 Service Directory header at 0xc00fb080 > bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xf0000+0xb520 > pnpbios: Found PnP BIOS data at 0xc00fbed0 > pnpbios: Entry = f0000:bf00 Rev = 1.0 > Other BIOS signatures found: > ULE: setup cpu 0 > bktr_mem: memory holder loaded > snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] > feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 > io: <I/O> > kbd: new array size 4 > kbd1 at kbdmux0 > mem: <memory> > Pentium Pro MTRR support enabled > null: <null device, zero device> > nfslock: pseudo-device > random: <entropy source, Software, Yarrow> > ACPI: RSDP @ 0x0xf70a0/0x0014 (v 0 IntelR) > ACPI: RSDT @ 0x0xfff3000/0x002C (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) > ACPI: FACP @ 0x0xfff3040/0x0074 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) > ACPI: DSDT @ 0x0xfff30c0/0x2311 (v 1 INTELR AWRDACPI 0x00001000 MSFT 0x0100000C) > ACPI: FACS @ 0x0xfff0000/0x0040 > ACPI: BOOT @ 0x0xfff5400/0x0028 (v 1 IntelR 0x00000000 0x00000000) > npx0: INT 16 interface > acpi0: <IntelR AWRDACPI> on motherboard > acpi0: [MPSAFE] > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: wakeup code va 0xc6d80000 pa 0x1000 > atpic: Programming IRQ9 as level/low > pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) > pcibios: BIOS version 2.10 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 7 func 0 > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, fef0000 (3) failed > ACPI timer: 0/3 1/2 0/4 0/3 1/2 0/3 0/3 0/4 0/4 0/3 -> 2 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 12 N 0 3 4 5 6 7 10 11 12 14 15 > Validation 0 12 N 0 3 4 5 6 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 > pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 > pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 14 N 0 3 4 5 6 7 10 11 12 14 15 > Validation 0 14 N 0 3 4 5 6 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 > pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 > cpu0: <ACPI CPU> on acpi0 > cpu0: switching to generic Cx mode > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > acpi_throttle0: P_CNT from P_BLK 0x4010 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x4041,0x5000-0x500f on acpi0 > ACPI: Found matching pin for 0.17.INTA at func 0: 12 > ACPI: Found matching pin for 0.15.INTA at func 0: 11 > ACPI: Found matching pin for 0.13.INTA at func 3: 14 > ACPI: Found matching pin for 0.13.INTB at func 0: 10 > ACPI: Found matching pin for 0.13.INTC at func 1: 12 > ACPI: Found matching pin for 0.13.INTD at func 2: 11 > ACPI: Found matching pin for 0.11.INTA at func 0: 10 > ACPI: Found matching pin for 0.9.INTA at func 0: 11 > ACPI: Found matching pin for 0.9.INTB at func 2: 12 > ACPI: Found matching pin for 0.7.INTD at func 2: 10 > pci0: <ACPI PCI bus> on pcib0 > pci0: domain=0, physical bus=0 > found-> vendor=0x8086, dev=0x7190, revid=0x03 > domain=0, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 26, enabled > found-> vendor=0x8086, dev=0x7191, revid=0x03 > domain=0, bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x7110, revid=0x02 > domain=0, bus=0, slot=7, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x7111, revid=0x01 > domain=0, bus=0, slot=7, func=1 > class=01-01-80, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled > found-> vendor=0x8086, dev=0x7112, revid=0x01 > domain=0, bus=0, slot=7, func=2 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=10 > map[20]: type I/O Port, range 32, base 0xc000, size 5, enabled > pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD:0) > pcib0: slot 7 INTD routed to irq 10 via \\_SB_.PCI0.LNKD > found-> vendor=0x8086, dev=0x7113, revid=0x02 > domain=0, bus=0, slot=7, func=3 > class=06-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[90]: type I/O Port, range 32, base 0x5000, size 4, enabled > found-> vendor=0x1102, dev=0x0004, revid=0x03 > domain=0, bus=0, slot=9, func=0 > class=04-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xc400, size 5, enabled > pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LNKB:0) > pcib0: slot 9 INTA routed to irq 11 via \\_SB_.PCI0.LNKB > found-> vendor=0x1102, dev=0x7003, revid=0x03 > domain=0, bus=0, slot=9, func=1 > class=09-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xc800, size 3, enabled > found-> vendor=0x1102, dev=0x4001, revid=0x01 > domain=0, bus=0, slot=9, func=2 > class=0c-00-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) > intpin=b, irq=12 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xdb005000, size 11, enabled > map[14]: type Memory, range 32, base 0xdb000000, size 14, enabled > pcib0: matched entry for 0.9.INTB (src \\_SB_.PCI0.LNKA:0) > pcib0: slot 9 INTB routed to irq 12 via \\_SB_.PCI0.LNKA > found-> vendor=0x10b7, dev=0x9055, revid=0x30 > domain=0, bus=0, slot=11, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) > intpin=a, irq=10 > powerspec 1 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xcc00, size 7, enabled > map[14]: type Memory, range 32, base 0xdb004000, size 7, enabled > pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LNKD:0) > pcib0: slot 11 INTA routed to irq 10 via \\_SB_.PCI0.LNKD > found-> vendor=0x10b9, dev=0x5237, revid=0x03 > domain=0, bus=0, slot=13, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=b, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdb006000, size 12, enabled > pcib0: matched entry for 0.13.INTB (src \\_SB_.PCI0.LNKD:0) > pcib0: slot 13 INTB routed to irq 10 via \\_SB_.PCI0.LNKD > found-> vendor=0x10b9, dev=0x5237, revid=0x03 > domain=0, bus=0, slot=13, func=1 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=c, irq=12 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdb007000, size 12, enabled > pcib0: matched entry for 0.13.INTC (src \\_SB_.PCI0.LNKA:0) > pcib0: slot 13 INTC routed to irq 12 via \\_SB_.PCI0.LNKA > found-> vendor=0x10b9, dev=0x5237, revid=0x03 > domain=0, bus=0, slot=13, func=2 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=d, irq=11 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdb008000, size 12, enabled > pcib0: matched entry for 0.13.INTD (src \\_SB_.PCI0.LNKB:0) > pcib0: slot 13 INTD routed to irq 11 via \\_SB_.PCI0.LNKB > found-> vendor=0x10b9, dev=0x5239, revid=0x01 > domain=0, bus=0, slot=13, func=3 > class=0c-03-20, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=a, irq=14 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdb009000, size 8, enabled > pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.LNKC:0) > pcib0: slot 13 INTA routed to irq 14 via \\_SB_.PCI0.LNKC > found-> vendor=0x1095, dev=0x3112, revid=0x01 > domain=0, bus=0, slot=15, func=0 > class=01-04-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled > map[14]: type I/O Port, range 32, base 0xd400, size 2, enabled > map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled > map[1c]: type I/O Port, range 32, base 0xdc00, size 2, enabled > map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled > map[24]: type Memory, range 32, base 0xdb00a000, size 9, enabled > pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LNKB:0) > pcib0: slot 15 INTA routed to irq 11 via \\_SB_.PCI0.LNKB > found-> vendor=0x109e, dev=0x036e, revid=0x02 > domain=0, bus=0, slot=17, func=0 > class=04-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns) > intpin=a, irq=12 > map[10]: type Prefetchable Memory, range 32, base 0xdb00b000, size 12, enabled > pcib0: matched entry for 0.17.INTA (src \\_SB_.PCI0.LNKA:0) > pcib0: slot 17 INTA routed to irq 12 via \\_SB_.PCI0.LNKA > found-> vendor=0x109e, dev=0x0878, revid=0x02 > domain=0, bus=0, slot=17, func=1 > class=04-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) > intpin=a, irq=12 > map[10]: type Prefetchable Memory, range 32, base 0xdb00c000, size 12, enabled > pcib0: matched entry for 0.17.INTA (src \\_SB_.PCI0.LNKA:0) > pcib0: slot 17 INTA routed to irq 12 via \\_SB_.PCI0.LNKA > agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0 > hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000 > agp0: allocating GATT for aperture of size 64M > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pcib1: domain 0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0xf000-0xfff > pcib1: memory decode 0xd8000000-0xd9ffffff > pcib1: prefetched decode 0xd4000000-0xd7ffffff > pci1: <PCI bus> on pcib1 > pci1: domain=0, physical bus=1 > found-> vendor=0x10de, dev=0x0181, revid=0xa4 > domain=0, bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) > intpin=a, irq=12 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xd8000000, size 24, enabled > pcib1: requested memory range 0xd8000000-0xd8ffffff: good > map[14]: type Prefetchable Memory, range 32, base 0xd4000000, size 26, enabled > pcib1: requested memory range 0xd4000000-0xd7ffffff: good > pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA:0) > pcib0: slot 1 INTA routed to irq 12 via \\_SB_.PCI0.LNKA > pcib1: slot 0 INTA is routed to irq 12 > vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xd4000000-0xd7ffffff irq 12 at device 0.0 on pci1 > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 > ata0: <ATA channel 0> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=00 ostat0=ff ostat1=ff > ata0: [MPSAFE] > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=03 ostat0=50 ostat1=01 > ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb > ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 > ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> > ata1: [MPSAFE] > ata1: [ITHREAD] > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 10 at device 7.2 on pci0 > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > pci0: <bridge> at device 7.3 (no driver attached) > emu10kx0: <Creative Audigy (Unknown model) [SB????]> port 0xc400-0xc41f irq 11 at device 9.0 on pci0 > emu10kx0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc400 > emu10kx0: [MPSAFE] > emu10kx0: [ITHREAD] > emu10kx: setmap (f9a0000, 8000), nseg=1, error=0 > emu10kx: setmap (f9b0000, 1000), nseg=1, error=0 > emu10kx0: Card Configuration ( 0x00011211 ) > emu10kx0: Card Configuration ( & 0xff000000 ) : > emu10kx0: Card Configuration ( & 0x00ff0000 ) : [I2S Codec] > emu10kx0: Card Configuration ( & 0x0000ff00 ) : [GPOUT0] [Joystick] > emu10kx0: Card Configuration ( & 0x000000ff ) : [AUTOMUTE] [AUDIOENABLE] > emu10kx0: Audigy Card Configuration ( 0x0084 ) > emu10kx0: Audigy Card Configuration ( & 0xff00 ) : > emu10kx0: Audigy Card Configuration ( & 0x00ff ) : [0x80] [GPOUT0] > pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0 > pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> > pcm0: Codec features 18 bit DAC, 18 bit ADC, 6 bit master volume, SigmaTel 3D Enhancement > pcm0: Primary codec extended features AMAP > pcm0: ac97 codec dac ready count: 0 > pcm0: Mixer "vol": > pcm0: Mixer "pcm": > pcm0: Mixer "speaker": > pcm0: Mixer "line": > pcm0: Mixer "mic": > pcm0: Mixer "cd": > pcm0: Mixer "rec": > pcm0: Mixer "igain": > pcm0: Mixer "ogain": > pcm0: Mixer "line1": > pcm0: Mixer "line2": > pcm0: Mixer "line3": > pcm0: Mixer "dig1": > pcm0: Mixer "dig2": > pcm0: Mixer "dig3": > pcm0: Mixer "phin": > pcm0: Mixer "phout": > pcm0: Mixer "video": > pcm0: clone manager: deadline=750ms flags=0x8000001e > emu10kx: setmap (f9c0000, 1000), nseg=1, error=0 > emu10kx: setmap (f9d0000, 1000), nseg=1, error=0 > emu10kx: setmap (f9e0000, 1000), nseg=1, error=0 > emu10kx: setmap (f9f0000, 1000), nseg=1, error=0 > pcm0: sndbuf_setmap 1000000, 10000; 0xcc5a8000 -> 1000000 > pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0 > pcm1: Mixer "vol": > pcm1: Mixer "pcm": > pcm1: clone manager: deadline=750ms flags=0x8000001e > emu10kx: setmap (1060000, 1000), nseg=1, error=0 > pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0 > pcm2: Mixer "vol": > pcm2: Mixer "pcm": > pcm2: clone manager: deadline=750ms flags=0x8000001e > emu10kx: setmap (1070000, 1000), nseg=1, error=0 > pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0 > pcm3: Mixer "vol": > pcm3: Mixer "pcm": > pcm3: clone manager: deadline=750ms flags=0x8000001e > emu10kx: setmap (1090000, 1000), nseg=1, error=0 > pci0: <input device> at device 9.1 (no driver attached) > fwohci0: vendor=1102, dev=4001 > fwohci0: vendor=1102, dev=4001 > fwohci0: <1394 Open Host Controller Interface> mem 0xdb005000-0xdb0057ff,0xdb000000-0xdb003fff irq 12 at device 9.2 on pci0 > fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdb005000 > fwohci0: [MPSAFE] > fwohci0: [FILTER] > fwohci0: OHCI version 1.10 (ROM=0) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:02:3c:00:81:00:e7:1f > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:02:3c:00:e7:1f > fwe0: bpf attached > fwe0: Ethernet address: 02:02:3c:00:e7:1f > fwip0: <IP over FireWire> on firewire0 > fwip0: bpf attached > fwip0: Firewire address: 00:02:3c:00:81:00:e7:1f @ 0xfffe00000000, S400, maxrec 2048 > dcons_crom0: <dcons configuration ROM> on firewire0 > dcons_crom0: bus_addr 0xf8d8000 > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: BUS reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdb004000-0xdb00407f irq 10 at device 11.0 on pci0 > xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xdb004000 > xl0: using memory mapped I/O > xl0: media options word: a > xl0: found MII/AUTO > miibus0: <MII bus> on xl0 > xlphy0: <3Com internal media interface> PHY 24 on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: bpf attached > xl0: Ethernet address: 00:50:04:34:fd:c1 > xl0: [MPSAFE] > xl0: [ITHREAD] > ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb006000-0xdb006fff irq 10 at device 13.0 on pci0 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb006000 > ohci0: [GIANT-LOCKED] > ohci0: [ITHREAD] > usb1: OHCI version 1.0, legacy support > usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 > usb1: USB revision 1.0 > uhub1: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb007000-0xdb007fff irq 12 at device 13.1 on pci0 > ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb007000 > ohci1: [GIANT-LOCKED] > ohci1: [ITHREAD] > usb2: OHCI version 1.0, legacy support > usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 > usb2: USB revision 1.0 > uhub2: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb008000-0xdb008fff irq 11 at device 13.2 on pci0 > ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb008000 > ohci2: [GIANT-LOCKED] > ohci2: [ITHREAD] > usb3: OHCI version 1.0, legacy support > usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2 > usb3: USB revision 1.0 > uhub3: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > uhub3: 2 ports with 2 removable, self powered > ehci0: <ALi M5239 USB 2.0 controller> mem 0xdb009000-0xdb0090ff irq 14 at device 13.3 on pci0 > ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdb009000 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb1 usb2 usb3 > usb4: <ALi M5239 USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: <AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 > uhub4: 6 ports with 6 removable, self powered > atapci1: <SiI SiI 3112 SATA150 controller> port 0xd000-0xd007,0xd400-0xd403,0xd800-0xd807,0xdc00-0xdc03,0xe000-0xe00f mem 0xdb00a000-0xdb00a1ff irq 11 at device 15.0 on pci0 > atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 > atapci1: [MPSAFE] > atapci1: [ITHREAD] > atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xdb00a000 > ata2: <ATA channel 0> on atapci1 > ata2: SATA connect time=0ms > ata2: reset tp1 mask=01 ostat0=50 ostat1=00 > ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> > ata2: [MPSAFE] > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: SATA connect status=00000000 > ata3: [MPSAFE] > ata3: [ITHREAD] > bktr0: <BrookTree 878> mem 0xdb00b000-0xdb00bfff irq 12 at device 17.0 on pci0 > bktr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb00b000 > bktr0: [GIANT-LOCKED] > bktr0: [ITHREAD] > brooktree0: PCI bus latency is 32. > bktr0: buffer size 3555328, addr 0x6000000 > bktr0: GPIO is 0x000477c3 > bktr0: subsystem 0x1461 0x0001 > bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner. > pci0: <multimedia> at device 17.1 (no driver attached) > acpi_tz0: <Thermal Zone> on acpi0 > fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: ic_type 90 part_id 80 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > fd1: <1200-KB 5.25" drive> on fdc0 drive 1 > sio0: irq maps: 0x801 0x811 0x801 0x801 > sio0: irq maps: 0x801 0x811 0x801 0x801 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0067 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: unable to allocate IRQ > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > atkbdc: atkbdc0 already exists; skipping it > fdc: fdc0 already exists; skipping it > sc: sc0 already exists; skipping it > sio: sio0 already exists; skipping it > vga: vga0 already exists; skipping it > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fe0: not probed (disabled) > ie0: not probed (disabled) > le0: not probed (disabled) > ppc0: parallel port found at 0x378 > ppc0: using extended I/O port range > ppc0: EPP SPP > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > ppbus0: [MPSAFE] > ppbus0: [ITHREAD] > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppc0: [GIANT-LOCKED] > ppc0: [ITHREAD] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0x801 0x801 0x801 0x801 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > ums0: <Logitech USB-PS/2 Mouse M-BA47, class 0/0, rev 1.00/1.20, addr 2> on uhub0 > ums0: 4 buttons and Z dir. > Device configuration finished. > procfs registered > Timecounter "TSC" frequency 400911913 Hz quality 800 > Timecounters tick every 1.000 msec > lo0: bpf attached > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire > acd0: setting PIO4 on PIIX4 chip > acd0: setting UDMA33 on PIIX4 chip > acd0: <HL-DT-ST RW/DVD GCC-4480B/1.02> CDRW drive at ata1 as master > acd0: read 8251KB/s (8251KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet > acd0: Writes: CDR, CDRW, test write, burnproof > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire > ad0: 38146MB <WDC WD400BD-75JMA0 05.01C05> at ata2-master SATA150 > ad0: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue > ad0: Silicon Image check3 failed > ad0: Adaptec check1 failed > ad0: LSI (v3) check1 failed > ad0: LSI (v2) check1 failed > ad0: FreeBSD check1 failed > GEOM: new disk ad0 > GEOM_LABEL: Label for provider ad0s1 is msdosfs/FREEDOS. > (probe0:sbp0:0:0:0): error 22 > (probe0:sbp0:0:0:0): Unretryable Error > (probe2:sbp0:0:2:0): error 22 > (probe2:sbp0:0:2:0): Unretryable Error > (probe3:sbp0:0:3:0): error 22 > (probe3:sbp0:0:3:0): Unretryable Error > (probe5:sbp0:0:5:0): error 22 > (probe5:sbp0:0:5:0): Unretryable Error > (probe6:sbp0:0:6:0): error 22 > (probe6:sbp0:0:6:0): Unretryable Error > (probe1:sbp0:0:1:0): error 22 > (probe1:sbp0:0:1:0): Unretryable Error > (probe4:sbp0:0:4:0): error 22 > (probe4:sbp0:0:4:0): Unretryable Error > ATA PseudoRAID loaded > Trying to mount root from ufs:/dev/ad0s4a > start_init: trying /sbin/init > Linux ELF exec handler installed > linprocfs registered > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > splash: image decoder found: green_saver > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > acpi: bad write to port 0x070 (8), val 0x4c > acpi: bad read from port 0x071 (8) > > ----------------- dmesg output with ACPI disabled ------------- > > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.0-RELEASE #2: Sat Apr 19 20:53:27 CEST 2008 > root@sarge.my.own.domain.no-net:/usr/obj/usr/src/sys/SARGE > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0989000. > Preloaded elf module "/boot/kernel/snd_emu10kx.ko" at 0xc0989160. > Preloaded elf module "/boot/kernel/sound.ko" at 0xc0989210. > Preloaded elf module "/boot/kernel/bktr.ko" at 0xc09892bc. > Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc0989368. > Calibrating clock(s) ... i8254 clock: 1193347 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 400910629 Hz > CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x652 Stepping = 2 > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > > Instruction TLB: 4 KB pages, 4-way set associative, 32 entries > Instruction TLB: 4 MB pages, fully associative, 2 entries > Data TLB: 4 KB pages, 4-way set associative, 64 entries > 2nd-level cache: 512 KB, 4-way set associative, 32 byte line size > 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size > Data TLB: 4 MB Pages, 4-way set associative, 8 entries > 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size > real memory = 268369920 (255 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000000c25000 - 0x000000000fb2dfff, 250646528 bytes (61193 pages) > avail memory = 253038592 (241 MB) > bios32: Found BIOS32 Service Directory header at 0xc00fb080 > bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xf0000+0xb520 > pnpbios: Found PnP BIOS data at 0xc00fbed0 > pnpbios: Entry = f0000:bf00 Rev = 1.0 > Other BIOS signatures found: > ULE: setup cpu 0 > snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] > feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 > bktr_mem: memory holder loaded > random: <entropy source, Software, Yarrow> > io: <I/O> > kbd: new array size 4 > kbd1 at kbdmux0 > mem: <memory> > Pentium Pro MTRR support enabled > null: <null device, zero device> > nfslock: pseudo-device > npx0: INT 16 interface > cpu0 on motherboard > pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) > pcibios: BIOS version 2.10 > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard > pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard > $PIR: Links after initial probe: > Link IRQ Rtd Ref IRQs > 0x62 255 N 9 3 4 5 7 9 10 11 12 14 15 > 0x63 255 N 9 3 4 5 7 9 10 11 12 14 15 > 0x60 255 N 9 3 4 5 7 9 10 11 12 14 15 > 0x61 255 N 9 3 4 5 7 9 10 11 12 14 15 > $PIR: Found matching pin for 0.17.INTA at func 0: 12 > $PIR: Found matching pin for 0.15.INTA at func 0: 11 > $PIR: Found matching pin for 0.13.INTA at func 3: 14 > $PIR: Found matching pin for 0.13.INTB at func 0: 10 > $PIR: Found matching pin for 0.13.INTC at func 1: 12 > $PIR: Found matching pin for 0.13.INTD at func 2: 11 > $PIR: Found matching pin for 0.11.INTA at func 0: 10 > $PIR: Found matching pin for 0.9.INTA at func 0: 11 > $PIR: Found matching pin for 0.9.INTB at func 2: 12 > $PIR: Found matching pin for 0.7.INTD at func 2: 10 > $PIR: Links after initial IRQ discovery: > Link IRQ Rtd Ref IRQs > 0x62 14 Y 9 3 4 5 7 9 10 11 12 14 15 > 0x63 10 Y 9 3 4 5 7 9 10 11 12 14 15 > 0x60 12 Y 9 3 4 5 7 9 10 11 12 14 15 > 0x61 11 Y 9 3 4 5 7 9 10 11 12 14 15 > $PIR: IRQs used by BIOS: 10 11 12 14 > $PIR: Interrupt Weights: > [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] > [ 0 0 0 0 0 0 0 0 0 0 9 9 9 0 9 0 ] > pci0: <PCI bus> on pcib0 > pci0: domain=0, physical bus=0 > found-> vendor=0x8086, dev=0x7190, revid=0x03 > domain=0, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 26, enabled > found-> vendor=0x8086, dev=0x7191, revid=0x03 > domain=0, bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x7110, revid=0x02 > domain=0, bus=0, slot=7, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x7111, revid=0x01 > domain=0, bus=0, slot=7, func=1 > class=01-01-80, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled > found-> vendor=0x8086, dev=0x7112, revid=0x01 > domain=0, bus=0, slot=7, func=2 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=10 > map[20]: type I/O Port, range 32, base 0xc000, size 5, enabled > $PIR: 0:7 INTD routed to irq 10 > found-> vendor=0x8086, dev=0x7113, revid=0x02 > domain=0, bus=0, slot=7, func=3 > class=06-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[90]: type I/O Port, range 32, base 0x5000, size 4, enabled > found-> vendor=0x1102, dev=0x0004, revid=0x03 > domain=0, bus=0, slot=9, func=0 > class=04-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xc400, size 5, enabled > $PIR: 0:9 INTA routed to irq 11 > found-> vendor=0x1102, dev=0x7003, revid=0x03 > domain=0, bus=0, slot=9, func=1 > class=09-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xc800, size 3, enabled > found-> vendor=0x1102, dev=0x4001, revid=0x01 > domain=0, bus=0, slot=9, func=2 > class=0c-00-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) > intpin=b, irq=12 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xdb005000, size 11, enabled > map[14]: type Memory, range 32, base 0xdb000000, size 14, enabled > $PIR: 0:9 INTB routed to irq 12 > found-> vendor=0x10b7, dev=0x9055, revid=0x30 > domain=0, bus=0, slot=11, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) > intpin=a, irq=10 > powerspec 1 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xcc00, size 7, enabled > map[14]: type Memory, range 32, base 0xdb004000, size 7, enabled > $PIR: 0:11 INTA routed to irq 10 > found-> vendor=0x10b9, dev=0x5237, revid=0x03 > domain=0, bus=0, slot=13, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=b, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdb006000, size 12, enabled > $PIR: 0:13 INTB routed to irq 10 > found-> vendor=0x10b9, dev=0x5237, revid=0x03 > domain=0, bus=0, slot=13, func=1 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=c, irq=12 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdb007000, size 12, enabled > $PIR: 0:13 INTC routed to irq 12 > found-> vendor=0x10b9, dev=0x5237, revid=0x03 > domain=0, bus=0, slot=13, func=2 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=d, irq=11 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdb008000, size 12, enabled > $PIR: 0:13 INTD routed to irq 11 > found-> vendor=0x10b9, dev=0x5239, revid=0x01 > domain=0, bus=0, slot=13, func=3 > class=0c-03-20, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=a, irq=14 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdb009000, size 8, enabled > $PIR: 0:13 INTA routed to irq 14 > found-> vendor=0x1095, dev=0x3112, revid=0x01 > domain=0, bus=0, slot=15, func=0 > class=01-04-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled > map[14]: type I/O Port, range 32, base 0xd400, size 2, enabled > map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled > map[1c]: type I/O Port, range 32, base 0xdc00, size 2, enabled > map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled > map[24]: type Memory, range 32, base 0xdb00a000, size 9, enabled > $PIR: 0:15 INTA routed to irq 11 > found-> vendor=0x109e, dev=0x036e, revid=0x02 > domain=0, bus=0, slot=17, func=0 > class=04-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns) > intpin=a, irq=12 > map[10]: type Prefetchable Memory, range 32, base 0xdb00b000, size 12, enabled > $PIR: 0:17 INTA routed to irq 12 > found-> vendor=0x109e, dev=0x0878, revid=0x02 > domain=0, bus=0, slot=17, func=1 > class=04-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) > intpin=a, irq=12 > map[10]: type Prefetchable Memory, range 32, base 0xdb00c000, size 12, enabled > $PIR: 0:17 INTA routed to irq 12 > agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0 > hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000 > agp0: allocating GATT for aperture of size 64M > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pcib1: domain 0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0xf000-0xfff > pcib1: memory decode 0xd8000000-0xd9ffffff > pcib1: prefetched decode 0xd4000000-0xd7ffffff > pci1: <PCI bus> on pcib1 > pci1: domain=0, physical bus=1 > found-> vendor=0x10de, dev=0x0181, revid=0xa4 > domain=0, bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) > intpin=a, irq=12 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xd8000000, size 24, enabled > pcib1: requested memory range 0xd8000000-0xd8ffffff: good > map[14]: type Prefetchable Memory, range 32, base 0xd4000000, size 26, enabled > pcib1: requested memory range 0xd4000000-0xd7ffffff: good > $PIR: 0:1 INTA routed to irq 12 > pcib1: slot 0 INTA is routed to irq 12 > vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xd4000000-0xd7ffffff irq 12 at device 0.0 on pci1 > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 > ata0: <ATA channel 0> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=00 ostat0=ff ostat1=ff > ata0: [MPSAFE] > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=03 ostat0=50 ostat1=01 > ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb > ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 > ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> > ata1: [MPSAFE] > ata1: [ITHREAD] > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 10 at device 7.2 on pci0 > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > pci0: <bridge> at device 7.3 (no driver attached) > emu10kx0: <Creative Audigy (Unknown model) [SB????]> port 0xc400-0xc41f irq 11 at device 9.0 on pci0 > emu10kx0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc400 > emu10kx0: [MPSAFE] > emu10kx0: [ITHREAD] > emu10kx: setmap (f970000, 8000), nseg=1, error=0 > emu10kx: setmap (f980000, 1000), nseg=1, error=0 > emu10kx0: Card Configuration ( 0x00011211 ) > emu10kx0: Card Configuration ( & 0xff000000 ) : > emu10kx0: Card Configuration ( & 0x00ff0000 ) : [I2S Codec] > emu10kx0: Card Configuration ( & 0x0000ff00 ) : [GPOUT0] [Joystick] > emu10kx0: Card Configuration ( & 0x000000ff ) : [AUTOMUTE] [AUDIOENABLE] > emu10kx0: Audigy Card Configuration ( 0x0084 ) > emu10kx0: Audigy Card Configuration ( & 0xff00 ) : > emu10kx0: Audigy Card Configuration ( & 0x00ff ) : [0x80] [GPOUT0] > pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0 > pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> > pcm0: Codec features 18 bit DAC, 18 bit ADC, 6 bit master volume, SigmaTel 3D Enhancement > pcm0: Primary codec extended features AMAP > pcm0: ac97 codec dac ready count: 0 > pcm0: Mixer "vol": > pcm0: Mixer "pcm": > pcm0: Mixer "speaker": > pcm0: Mixer "line": > pcm0: Mixer "mic": > pcm0: Mixer "cd": > pcm0: Mixer "rec": > pcm0: Mixer "igain": > pcm0: Mixer "ogain": > pcm0: Mixer "line1": > pcm0: Mixer "line2": > pcm0: Mixer "line3": > pcm0: Mixer "dig1": > pcm0: Mixer "dig2": > pcm0: Mixer "dig3": > pcm0: Mixer "phin": > pcm0: Mixer "phout": > pcm0: Mixer "video": > pcm0: clone manager: deadline=750ms flags=0x8000001e > emu10kx: setmap (f990000, 1000), nseg=1, error=0 > emu10kx: setmap (f9a0000, 1000), nseg=1, error=0 > emu10kx: setmap (f9b0000, 1000), nseg=1, error=0 > emu10kx: setmap (f9c0000, 1000), nseg=1, error=0 > pcm0: sndbuf_setmap f9e0000, 10000; 0xcc597000 -> f9e0000 > pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0 > pcm1: Mixer "vol": > pcm1: Mixer "pcm": > pcm1: clone manager: deadline=750ms flags=0x8000001e > emu10kx: setmap (1030000, 1000), nseg=1, error=0 > pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0 > pcm2: Mixer "vol": > pcm2: Mixer "pcm": > pcm2: clone manager: deadline=750ms flags=0x8000001e > emu10kx: setmap (1050000, 1000), nseg=1, error=0 > pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0 > pcm3: Mixer "vol": > pcm3: Mixer "pcm": > pcm3: clone manager: deadline=750ms flags=0x8000001e > emu10kx: setmap (1060000, 1000), nseg=1, error=0 > pci0: <input device> at device 9.1 (no driver attached) > fwohci0: vendor=1102, dev=4001 > fwohci0: vendor=1102, dev=4001 > fwohci0: <1394 Open Host Controller Interface> mem 0xdb005000-0xdb0057ff,0xdb000000-0xdb003fff irq 12 at device 9.2 on pci0 > fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdb005000 > fwohci0: [MPSAFE] > fwohci0: [FILTER] > fwohci0: OHCI version 1.10 (ROM=0) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:02:3c:00:81:00:e7:1f > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > dcons_crom0: <dcons configuration ROM> on firewire0 > dcons_crom0: bus_addr 0xf894000 > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:02:3c:00:e7:1f > fwe0: bpf attached > fwe0: Ethernet address: 02:02:3c:00:e7:1f > fwip0: <IP over FireWire> on firewire0 > fwip0: bpf attached > fwip0: Firewire address: 00:02:3c:00:81:00:e7:1f @ 0xfffe00000000, S400, maxrec 2048 > fwohci0: Initiate bus reset > fwohci0: BUS reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdb004000-0xdb00407f irq 10 at device 11.0 on pci0 > xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xdb004000 > xl0: using memory mapped I/O > xl0: media options word: a > xl0: found MII/AUTO > miibus0: <MII bus> on xl0 > xlphy0: <3Com internal media interface> PHY 24 on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: bpf attached > xl0: Ethernet address: 00:50:04:34:fd:c1 > xl0: [MPSAFE] > xl0: [ITHREAD] > ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb006000-0xdb006fff irq 10 at device 13.0 on pci0 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb006000 > ohci0: [GIANT-LOCKED] > ohci0: [ITHREAD] > usb1: OHCI version 1.0, legacy support > usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 > usb1: USB revision 1.0 > uhub1: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb007000-0xdb007fff irq 12 at device 13.1 on pci0 > ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb007000 > ohci1: [GIANT-LOCKED] > ohci1: [ITHREAD] > usb2: OHCI version 1.0, legacy support > usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 > usb2: USB revision 1.0 > uhub2: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb008000-0xdb008fff irq 11 at device 13.2 on pci0 > ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb008000 > ohci2: [GIANT-LOCKED] > ohci2: [ITHREAD] > usb3: OHCI version 1.0, legacy support > usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2 > usb3: USB revision 1.0 > uhub3: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > uhub3: 2 ports with 2 removable, self powered > ehci0: <ALi M5239 USB 2.0 controller> mem 0xdb009000-0xdb0090ff irq 14 at device 13.3 on pci0 > ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdb009000 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb1 usb2 usb3 > usb4: <ALi M5239 USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: <AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 > uhub4: 6 ports with 6 removable, self powered > atapci1: <SiI SiI 3112 SATA150 controller> port 0xd000-0xd007,0xd400-0xd403,0xd800-0xd807,0xdc00-0xdc03,0xe000-0xe00f mem 0xdb00a000-0xdb00a1ff irq 11 at device 15.0 on pci0 > atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 > atapci1: [MPSAFE] > atapci1: [ITHREAD] > atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xdb00a000 > ata2: <ATA channel 0> on atapci1 > ata2: SATA connect time=0ms > ata2: reset tp1 mask=01 ostat0=50 ostat1=00 > ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> > ata2: [MPSAFE] > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: SATA connect status=00000000 > ata3: [MPSAFE] > ata3: [ITHREAD] > bktr0: <BrookTree 878> mem 0xdb00b000-0xdb00bfff irq 12 at device 17.0 on pci0 > bktr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb00b000 > bktr0: [GIANT-LOCKED] > bktr0: [ITHREAD] > brooktree0: PCI bus latency is 32. > bktr0: buffer size 3555328, addr 0x6000000 > bktr0: GPIO is 0x000477c3 > bktr0: subsystem 0x1461 0x0001 > bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner. > pci0: <multimedia> at device 17.1 (no driver attached) > pnpbios: 13 devices, largest 69 bytes > PNP0200: adding dma mask 0x10 > PNP0200: adding io range 0-0xf, size=0x10, align=0 > PNP0200: adding io range 0x81-0x83, size=0x3, align=0 > PNP0200: adding io range 0x87-0x87, size=0x1, align=0 > PNP0200: adding io range 0x89-0x8b, size=0x3, align=0 > PNP0200: adding io range 0x8f-0x91, size=0x3, align=0 > PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 > pnpbios: handle 1 device ID PNP0200 (0002d041) > PNP0100: adding irq mask 0x1 > PNP0100: adding io range 0x40-0x43, size=0x4, align=0 > pnpbios: handle 2 device ID PNP0100 (0001d041) > PNP0b00: adding irq mask 0x100 > PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 > pnpbios: handle 3 device ID PNP0b00 (000bd041) > PNP0303: adding irq mask 0x2 > PNP0303: adding io range 0x60-0x60, size=0x1, align=0 > PNP0303: adding io range 0x64-0x64, size=0x1, align=0 > pnpbios: handle 4 device ID PNP0303 (0303d041) > PNP0800: adding io range 0x61-0x61, size=0x1, align=0 > pnpbios: handle 5 device ID PNP0800 (0008d041) > PNP0c04: adding irq mask 0x2000 > PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 > pnpbios: handle 6 device ID PNP0c04 (040cd041) > PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 > PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 > PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000 > pnpbios: handle 7 device ID PNP0c01 (010cd041) > PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 > PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 > PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 > PNP0c02: adding fixed memory32 range 0xcf400-0xcffff, size=0xc00 > pnpbios: handle 8 device ID PNP0c02 (020cd041) > PNP0a03: adding io range 0x294-0x297, size=0x4, align=0 > PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0 > PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 > PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0 > PNP0a03: adding io range 0x4000-0x403f, size=0x40, align=0 > PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0 > pnpbios: handle 9 device ID PNP0a03 (030ad041) > PNP0501: adding irq mask 0x10 > PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 > pnpbios: handle 12 device ID PNP0501 (0105d041) > PNP0700: adding dma mask 0x4 > PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 > PNP0700: adding irq mask 0x40 > pnpbios: handle 13 device ID PNP0700 (0007d041) > PNP0400: adding irq mask 0x80 > PNP0400: adding io range 0x378-0x37f, size=0x8, align=0 > pnpbios: handle 14 device ID PNP0400 (0004d041) > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > pmtimer0 on isa0 > atkbd: the current kbd controller command byte 0067 > atkbd: keyboard ID 0x41ab (2) > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: current command byte:0067 > psm0: failed to reset the aux device. > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fdc0: ic_type 90 part_id 80 > fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: ic_type 90 part_id 80 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > fd1: <1200-KB 5.25" drive> on fdc0 drive 1 > fe0: not probed (disabled) > ie0: not probed (disabled) > le0: not probed (disabled) > ppc0: parallel port found at 0x378 > ppc0: using extended I/O port range > ppc0: EPP SPP > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > ppbus0: [MPSAFE] > ppbus0: [ITHREAD] > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppc0: [GIANT-LOCKED] > ppc0: [ITHREAD] > sio0: irq maps: 0x801 0x811 0x801 0x801 > sio0: irq maps: 0x801 0x811 0x801 0x801 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0x801 0x801 0x801 0x801 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > unknown: <PNP0303> can't assign resources (port) > unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0 > unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0 > unknown: <PNP0c01> can't assign resources (memory) > unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0 > unknown: <PNP0a03> can't assign resources (port) > unknown: <PNP0a03> at port 0x294-0x297,0x4d0-0x4d1,0xcf8-0xcff,0x480-0x48f,0x4000-0x403f,0x5000-0x501f pnpid PNP0a03 on isa0 > unknown: <PNP0501> can't assign resources (port) > unknown: <PNP0501> at port 0x3f8-0x3ff pnpid PNP0501 on isa0 > unknown: <PNP0700> can't assign resources (port) > unknown: <PNP0700> at port 0x3f2-0x3f5 pnpid PNP0700 on isa0 > unknown: <PNP0400> can't assign resources (port) > unknown: <PNP0400> at port 0x378-0x37f pnpid PNP0400 on isa0 > ums0: <Logitech USB-PS/2 Mouse M-BA47, class 0/0, rev 1.00/1.20, addr 2> on uhub0 > ums0: 4 buttons and Z dir. > Device configuration finished. > procfs registered > Timecounter "TSC" frequency 400910629 Hz quality 800 > Timecounters tick every 1.000 msec > lo0: bpf attached > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire > acd0: setting PIO4 on PIIX4 chip > acd0: setting UDMA33 on PIIX4 chip > acd0: <HL-DT-ST RW/DVD GCC-4480B/1.02> CDRW drive at ata1 as master > acd0: read 8251KB/s (8251KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet > acd0: Writes: CDR, CDRW, test write, burnproof > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire > ad0: 38146MB <WDC WD400BD-75JMA0 05.01C05> at ata2-master SATA150 > ad0: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue > ad0: Silicon Image check3 failed > ad0: Adaptec check1 failed > ad0: LSI (v3) check1 failed > ad0: LSI (v2) check1 failed > ad0: FreeBSD check1 failed > GEOM: new disk ad0 > GEOM_LABEL: Label for provider ad0s1 is msdosfs/FREEDOS. > (probe0:sbp0:0:0:0): error 22 > (probe0:sbp0:0:0:0): Unretryable Error > (probe1:sbp0:0:1:0): error 22 > (probe1:sbp0:0:1:0): Unretryable Error > (probe2:sbp0:0:2:0): error 22 > (probe2:sbp0:0:2:0): Unretryable Error > (probe3:sbp0:0:3:0): error 22 > (probe3:sbp0:0:3:0): Unretryable Error > (probe4:sbp0:0:4:0): error 22 > (probe4:sbp0:0:4:0): Unretryable Error > (probe5:sbp0:0:5:0): error 22 > (probe5:sbp0:0:5:0): Unretryable Error > (probe6:sbp0:0:6:0): error 22 > (probe6:sbp0:0:6:0): Unretryable Error > ATA PseudoRAID loaded > Trying to mount root from ufs:/dev/ad0s4a > start_init: trying /sbin/init > Linux ELF exec handler installed > linprocfs registered > splash: image decoder found: green_saver > > ---------------- Output from sysctl hw.acpi ----------------------- > > hw.acpi.supported_sleep_state: S1 S4 S5 > hw.acpi.power_button_state: S5 > hw.acpi.sleep_button_state: S1 > hw.acpi.lid_switch_state: NONE > hw.acpi.standby_state: S1 > hw.acpi.suspend_state: S3 > hw.acpi.sleep_delay: 1 > hw.acpi.s4bios: 1 > hw.acpi.verbose: 1 > hw.acpi.disable_on_reboot: 0 > hw.acpi.handle_reboot: 0 > hw.acpi.reset_video: 0 > hw.acpi.cpu.cx_lowest: C1 > hw.acpi.thermal.min_runtime: 0 > hw.acpi.thermal.polling_rate: 10 > hw.acpi.thermal.user_override: 0 > hw.acpi.thermal.tz0.temperature: 0.0C > hw.acpi.thermal.tz0.active: -1 > hw.acpi.thermal.tz0.passive_cooling: 1 > hw.acpi.thermal.tz0.thermal_flags: 0 > hw.acpi.thermal.tz0._PSV: 70.0C > hw.acpi.thermal.tz0._HOT: -1 > hw.acpi.thermal.tz0._CRT: 200.0C > hw.acpi.thermal.tz0._ACx: 70.0C -1 -1 -1 -1 -1 -1 -1 -1 -1 > -- Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?480C0DEF.2030707>