Date: Thu, 14 Feb 2002 22:18:41 -0800 From: Ted Faber <faber@lunabase.org> To: Nick Sayer <nsayer@quack.kfu.com> Cc: Rasputin <rasputin@submonkey.net>, freebsd-stable@FreeBSD.ORG Subject: Re: USB Epson printers? Message-ID: <20020214221841.C18203@praxis.lunabase.org> In-Reply-To: <3C6A8D9E.5080506@quack.kfu.com>; from nsayer@quack.kfu.com on Wed, Feb 13, 2002 at 08:00:30AM -0800 References: <20020213120247.A58159@shikima.mine.nu> <3C6A8D9E.5080506@quack.kfu.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--mSxgbZZZvrAyzONB
Content-Type: multipart/mixed; boundary="GPJrCs/72TxItFYR"
Content-Disposition: inline
--GPJrCs/72TxItFYR
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Wed, Feb 13, 2002 at 08:00:30AM -0800, Nick Sayer wrote:
> I have a Photo 870 that has worked since at least 4.2-RELEASE. It shows
> up under ulpt and works exactly as you might expect.
Hmmm.
I have a photo 780 that works perfectly through the parallel port, but
although the kernel recognizes it just fine, printing is gibberish. The
same file that prints through the parallel port prints garbage through
ulpt0. Dmesg attached.
Am I missing something obvious?
--GPJrCs/72TxItFYR
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #3: Wed Feb 13 22:42:17 PST 2002
root@ylum.lunabase.org:/usr/obj/usr/src/sys/YLUM
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (467.73-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 65994752 (64448K bytes)
avail memory = 61251584 (59816K bytes)
Preloaded elf kernel "kernel" at 0xc02f9000.
Preloaded elf module "vesa.ko" at 0xc02f909c.
Preloaded elf module "usb.ko" at 0xc02f9138.
Preloaded elf module "ulpt.ko" at 0xc02f91d4.
Preloaded elf module "ums.ko" at 0xc02f9270.
VESA: v2.0, 1024k memory, flags:0x1, mode table:0xc02d1282 (1000022)
VESA: Intel810(TM) Graphics Chip Accelerated VGA BIOS
Pentium Pro MTRR support enabled
Using $PIR table, 4 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810 (i810 GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810 (i810 GMCH) SVGA controller> at 1.0 irq 5
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xc000-0xc01f irq 5 at device 8.0 on pci1
ed0: address 00:20:78:11:c9:cf, type NE2000 (16 bit)
dc0: <82c169 PNIC 10/100BaseTX> port 0xc400-0xc4ff mem 0xde000000-0xde0000ff irq 11 at device 9.0 on pci1
dc0: Ethernet address: 00:c0:f0:56:eb:f7
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xd000-0xd01f irq 9 at device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2, iclass 7/1
chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 0xdc00-0xdc3f,0xd800-0xd8ff irq 11 at device 31.5 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19092MB <WDC WD200BB-00AUA1> [38792/16/63] at ata0-master UDMA66
ad1: 12971MB <WDC WD136AA> [26354/16/63] at ata0-slave UDMA66
acd0: CDROM <685A> at ata1-master using PIO3
Mounting root from ufs:/dev/ad0s1a
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled
ulpt0: at uhub0 port 1 (addr 2) disconnected
ulpt0: detached
--GPJrCs/72TxItFYR--
--mSxgbZZZvrAyzONB
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (FreeBSD)
Comment: For info see http://www.gnupg.org
iD8DBQE8bKhBaUz3f+Zf+XsRAnBWAKDvMc5P7oiZghDQd92zQTf+FrsbVgCg4y1T
BhA1uRh7AkHWaWphWm40sX8=
=9ycw
-----END PGP SIGNATURE-----
--mSxgbZZZvrAyzONB--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020214221841.C18203>