Date: Sat, 1 Jul 1995 06:36:07 GMT From: Stephen Hocking <sysseh@devetir.qld.gov.au> To: hackers@freebsd.org Subject: Re: FreeBSD 2.0.5 Boot Does not Recognise... Message-ID: <199507010636.GAA26426@netfl15a.devetir.qld.gov.au>
next in thread | raw e-mail | index | archive | help
> >I have a Future Domain TMC-885M SCSI controller card and a Quantum P80 >hard drive. When I start up from the boot disk to install FreeBSD 2.0.5, >the PARTITION submenu item of the INSTALL menu does not recognise my FD >card. When I rebooted, and used the "-c" userconfig envocation, I did >not see my FD TMC-885M SCSI card listed as one of the standard hardware >types. Please mail me some suggestions of what to do now. > >Thanks. > >David Nowak >sfi@primenet.com or >djnowak@pop.com > I have one of these vile creations. You use the "sea" controller, which used to work under 2.0 (after a fashion). I had to turn off BLIND_TRANSFER to get it to work with a single drive, and #define SEANOMSGS 1 to get it to work OK with 2 drives. I don't believe the -current driver will work. It wedges during boot up with mine. If you tell me where you have the IRQ and memory address is, along with your other hardware addresses, I could create a kernel for you. Stephen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199507010636.GAA26426>