From owner-svn-src-stable@FreeBSD.ORG Tue Aug 26 03:45:55 2014 Return-Path: Delivered-To: svn-src-stable@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 61D43D60; Tue, 26 Aug 2014 03:45:55 +0000 (UTC) Received: from svn.freebsd.org (svn.freebsd.org [IPv6:2001:1900:2254:2068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 41B4C3046; Tue, 26 Aug 2014 03:45:55 +0000 (UTC) Received: from svn.freebsd.org ([127.0.1.70]) by svn.freebsd.org (8.14.9/8.14.9) with ESMTP id s7Q3jtSQ022312; Tue, 26 Aug 2014 03:45:55 GMT (envelope-from imp@FreeBSD.org) Received: (from imp@localhost) by svn.freebsd.org (8.14.9/8.14.9/Submit) id s7Q3jtVO022311; Tue, 26 Aug 2014 03:45:55 GMT (envelope-from imp@FreeBSD.org) Message-Id: <201408260345.s7Q3jtVO022311@svn.freebsd.org> X-Authentication-Warning: svn.freebsd.org: imp set sender to imp@FreeBSD.org using -f From: Warner Losh Date: Tue, 26 Aug 2014 03:45:55 +0000 (UTC) To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-10@freebsd.org Subject: svn commit: r270645 - stable/10/sys/cam/ata X-SVN-Group: stable-10 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-src-stable@freebsd.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: SVN commit messages for all the -stable branches of the src tree List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 26 Aug 2014 03:45:55 -0000 Author: imp Date: Tue Aug 26 03:45:54 2014 New Revision: 270645 URL: http://svnweb.freebsd.org/changeset/base/270645 Log: Merge SETAN changes from head: r270327 | imp | 2014-08-22 07:15:59 -0600 (Fri, 22 Aug 2014) | 6 lines We should never enter the PROBE_SETAN phase if we're not ATAPI, since that's ATAPI specific. Instead, skip to PROBE_SET_MULTI instead for non ATAPI protocols. The prior code incorrectly terminated the probe with a break, rather than arranging for probedone to get called. This caused panics or worse on some systems. r270249 | imp | 2014-08-20 16:58:12 -0600 (Wed, 20 Aug 2014) | 13 lines Turns out that IDENTIFY DEVICE and IDENTIFY PACKET DEVICE return data that's only mostly similar. Specifically word 78 bits are defined for IDENTIFY DEVICE as 5 Supports Hardware Feature Control while a IDENTIFY PACKET DEVICE defines them as 5 Asynchronous notification supported Therefore, only pay attention to bit 5 when we're talking to ATAPI devices (we don't use the hardware feature control at this time). Ignore it for ATA devices. Remove kludge that papered over this issue for Samsung SATA SSDs, since Micron drives also have the bit set and the error was caused by this bad interpretation of the spec (which is quite easy to do, since bits aren't normally overlapping like this). Sponsored by: Netflix (the merge and the original work) Modified: stable/10/sys/cam/ata/ata_xpt.c Directory Properties: stable/10/ (props changed) Modified: stable/10/sys/cam/ata/ata_xpt.c ============================================================================== --- stable/10/sys/cam/ata/ata_xpt.c Tue Aug 26 02:31:37 2014 (r270644) +++ stable/10/sys/cam/ata/ata_xpt.c Tue Aug 26 03:45:54 2014 (r270645) @@ -750,14 +750,6 @@ out: goto noerror; /* - * Some Samsung SSDs report supported Asynchronous Notification, - * but return ABORT on attempt to enable it. - */ - } else if (softc->action == PROBE_SETAN && - status == CAM_ATA_STATUS_ERROR) { - goto noerror; - - /* * SES and SAF-TE SEPs have different IDENTIFY commands, * but SATA specification doesn't tell how to identify them. * Until better way found, just try another if first fail. @@ -1059,7 +1051,8 @@ noerror: } /* FALLTHROUGH */ case PROBE_SETDMAAA: - if ((ident_buf->satasupport & ATA_SUPPORT_ASYNCNOTIF) && + if (path->device->protocol != PROTO_ATA && + (ident_buf->satasupport & ATA_SUPPORT_ASYNCNOTIF) && (!(softc->caps & CTS_SATA_CAPS_H_AN)) != (!(ident_buf->sataenabled & ATA_SUPPORT_ASYNCNOTIF))) { PROBE_SET_ACTION(softc, PROBE_SETAN); @@ -1180,7 +1173,7 @@ notsata: else caps = 0; /* Remember what transport thinks about AEN. */ - if (caps & CTS_SATA_CAPS_H_AN) + if ((caps & CTS_SATA_CAPS_H_AN) && path->device->protocol != PROTO_ATA) path->device->inq_flags |= SID_AEN; else path->device->inq_flags &= ~SID_AEN;