Date: Sat, 22 Dec 2007 13:38:46 -0500 From: Michael Proto <mike@jellydonut.org> To: freebsd-stable@freebsd.org, Jakub Dawidek <pjd@FreeBSD.org> Subject: Trying to initialize padlock support on Via C7 Eden CPU Message-ID: <476D59B6.4030609@jellydonut.org>
next in thread | raw e-mail | index | archive | help
Hello, I purchased a Jetway J7F4K1G2E w/VIA Eden 1.2GHz cpu/motherboard combo (http://e-itx.com/jetway-j7f4k1g2e-mini-itx-motherboard.html) that I'm trying to get working with the FreeBSD padlock driver. Based on what I see from the manufacturer's CPU support list , http://www.jetwaycomputer.com/VIA3.html, I have a C7 Esther processer. It looks like the CPUID for this processor isn't recognized by FreeBSD 6.3-RC1 or 7.0-BETA3. GENERIC on 7.0-BETA3 detects the CPU as follows: CPU: VIA/IDT Unknown (1200.01-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x6d0 Stepping = 0 Features=0xa7c9baff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> Features2=0x4181<SSE3,EST,TM2,xTPR> ... padlock0: No ACE support. The other list posts I've seen for the C7 reference a 0x6a9 Id with a stepping of 9. I added a small patch to /sys/i386/i386/identcpu.c to detect this Id: --- sys/i386/i386/identcpu.c.old 2007-05-29 19:39:18.000000000 +0000 +++ sys/i386/i386/identcpu.c 2007-12-21 13:54:57.000000000 +0000 @@ -585,6 +585,8 @@ goto via_common; case 0x6a0: strcpy(cpu_model, "VIA C7 Esther"); + case 0x6d0: + strcpy(cpu_model, "VIA C7 Esther"); via_common: do_cpuid(0xc0000000, regs); i = regs[0]; And now GENERIC sees the Esther along with the supported crypto functions, but padlock doesn't initialize: CPU: VIA C7 Esther+RNG+AES+AES-CTR+SHA1+SHA256+RSA (1200.01-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x6d0 Stepping = 0 Features=0xa7c9baff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> Features2=0x4181<SSE3,EST,TM2,xTPR> ... padlock0: No ACE support. Unfortunately I'm at a loss on where to go next. I looked through initcpu.c and everything in /sys/crypto/via/ but I don't grok C so I don't really know what I'm looking at. Any ideas on how to get this CPU supported with padlock would be much appreciated. Thanks and happy holidays, -Michael Proto Below is a verbose 7.0-BETA3 dmesg.boot (with my above identcpu.c patch applied) Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA3 #0: Sat Dec 22 07:39:36 UTC 2007 root@tester.localnet:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d6e000. Preloaded elf module "/boot/kernel/padlock.ko" at 0xc0d6e19c. Preloaded elf module "/boot/kernel/crypto.ko" at 0xc0d6e248. Preloaded elf module "/boot/kernel/zlib.ko" at 0xc0d6e2f4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0d6e3a0. Calibrating clock(s) ... i8254 clock: 1193579 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1200010302 Hz CPU: VIA C7 Esther+RNG+AES+AES-CTR+SHA1+SHA256+RSA (1200.01-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x6d0 Stepping = 0 Features=0xa7c9baff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> Features2=0x4181<SSE3,EST,TM2,xTPR> real memory = 1055784960 (1006 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000003dce4fff, 1019990016 bytes (249021 pages) avail memory = 1019531264 (972 MB) Table 'FACP' at 0x3eee3080 Table 'APIC' at 0x3eee83c0 MADT: Found table at 0x3eee83c0 MP Configuration Table version 1.4 found at 0xc00f22f0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) ACPI APIC Table: <CN700 AWRDACPI> bios32: Found BIOS32 Service Directory header at 0xc00f9d30 bios32: Entry = 0xfa1b0 (c00fa1b0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xa200 pnpbios: Found PnP BIOS data at 0xc00fac30 pnpbios: Entry = f0000:ac60 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 ACPI: RSDP @ 0x0xf7c40/0x0014 (v 0 CN700 ) ACPI: RSDT @ 0x0x3eee3000/0x002C (v 1 CN700 AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0x3eee3080/0x0074 (v 1 CN700 AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0x3eee3100/0x5281 (v 1 CN700 AWRDACPI 0x00001000 MSFT 0x03000000) ACPI: FACS @ 0x0x3eee0000/0x0040 ACPI: APIC @ 0x0x3eee83c0/0x005A (v 1 CN700 AWRDACPI 0x42302E31 AWRD 0x00000000) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic0 <Version 0.3> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 io: <I/O> mem: <memory> crypto: <crypto core> null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Dec 22 2007 07:28:16) npx0: INT 16 interface cryptosoft0: <software crypto> on motherboard crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 padlock0: No ACE support. acpi0: <CN700 AWRDACPI> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000760 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03141106) pcibios: BIOS version 2.10 AcpiOsDerivePciId: \\_SB_.PCI0.VT86.VTSB -> bus 0 dev 17 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.PATA.PAPR -> bus 0 dev 15 func 1 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd7e45000 pa 0x1000 AcpiOsDerivePciId: \\_SB_.PCI0.IDE0.VIDE -> bus 0 dev 17 func 1 AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SAPR -> bus 0 dev 15 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.USB0.SB72 -> bus 0 dev 17 func 2 AcpiOsDerivePciId: \\_SB_.PCI0.USB1.SB73 -> bus 0 dev 17 func 3 AcpiOsDerivePciId: \\_SB_.PCI0.USB2.SB74 -> bus 0 dev 17 func 4 AcpiOsDerivePciId: \\_SB_.PCI0.USB3.U2F0 -> bus 0 dev 16 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.USB4.U2F1 -> bus 0 dev 16 func 1 AcpiOsDerivePciId: \\_SB_.PCI0.USB5.U2F2 -> bus 0 dev 16 func 2 AcpiOsDerivePciId: \\_SB_.PCI0.USB6.U2F3 -> bus 0 dev 16 func 3 AcpiOsDerivePciId: \\_SB_.PCI0.USB7.U2F4 -> bus 0 dev 16 func 4 AcpiOsDerivePciId: \\_SB_.PCI0.VT86.USBC -> bus 0 dev 17 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3ede0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 6 7 10 11 12 Validation 0 11 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 6 7 10 11 12 Validation 0 11 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 6 7 10 11 12 Validation 0 10 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 20 N 0 20 Validation 0 20 N 0 20 After Disable 0 255 N 0 20 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 21 N 0 21 Validation 0 21 N 0 21 After Disable 0 255 N 0 21 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 22 N 0 22 Validation 0 22 N 0 22 After Disable 0 255 N 0 22 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 23 N 0 23 Validation 0 23 N 0 23 After Disable 0 255 N 0 23 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1106, dev=0x0314, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xf8000000, size 25, enabled found-> vendor=0x1106, dev=0x1314, revid=0x00 domain=0, bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x2314, revid=0x00 domain=0, bus=0, slot=0, func=2 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x3208, revid=0x00 domain=0, bus=0, slot=0, func=3 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x4314, revid=0x00 domain=0, bus=0, slot=0, func=4 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x7314, revid=0x00 domain=0, bus=0, slot=0, func=7 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0xb198, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D3 current D0 found-> vendor=0x10ec, dev=0x8167, revid=0x10 domain=0, bus=0, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xf000, size 8, enabled map[14]: type Memory, range 32, base 0xfdfff000, size 8, enabled pcib0: matched entry for 0.9.INTA pcib0: slot 9 INTA hardwired to IRQ 18 found-> vendor=0x10ec, dev=0x8167, revid=0x10 domain=0, bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xf200, size 8, enabled map[14]: type Memory, range 32, base 0xfdffe000, size 8, enabled pcib0: matched entry for 0.11.INTA pcib0: slot 11 INTA hardwired to IRQ 19 found-> vendor=0x1106, dev=0x3149, revid=0x80 domain=0, bus=0, slot=15, func=0 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xff00, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe00, size 2, enabled map[18]: type I/O Port, range 32, base 0xfd00, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfc00, size 2, enabled map[20]: type I/O Port, range 32, base 0xfb00, size 4, enabled map[24]: type I/O Port, range 32, base 0xf400, size 8, enabled pcib0: matched entry for 0.15.INTB (src \\_SB_.PCI0.ALKA:0) pcib0: slot 15 INTB routed to irq 20 via \\_SB_.PCI0.ALKA found-> vendor=0x1106, dev=0x0571, revid=0x06 domain=0, bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xfa00, size 4, enabled found-> vendor=0x1106, dev=0x3038, revid=0x81 domain=0, bus=0, slot=16, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type I/O Port, range 32, base 0xf900, size 5, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB:0) pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB found-> vendor=0x1106, dev=0x3038, revid=0x81 domain=0, bus=0, slot=16, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type I/O Port, range 32, base 0xf800, size 5, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB:0) pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB found-> vendor=0x1106, dev=0x3038, revid=0x81 domain=0, bus=0, slot=16, func=2 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type I/O Port, range 32, base 0xf700, size 5, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB:0) pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB found-> vendor=0x1106, dev=0x3038, revid=0x81 domain=0, bus=0, slot=16, func=3 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type I/O Port, range 32, base 0xf600, size 5, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB:0) pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB found-> vendor=0x1106, dev=0x3104, revid=0x86 domain=0, bus=0, slot=16, func=4 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfdffd000, size 8, enabled pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.ALKB:0) pcib0: slot 16 INTC routed to irq 21 via \\_SB_.PCI0.ALKB found-> vendor=0x1106, dev=0x3227, revid=0x00 domain=0, bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfb000000-0xfcffffff pcib1: prefetched decode 0xf4000000-0xf7ffffff pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1106, dev=0x3344, revid=0x01 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xf4000000, size 26, enabled pcib1: requested memory range 0xf4000000-0xf7ffffff: good map[14]: type Memory, range 32, base 0xfb000000, size 24, enabled pcib1: requested memory range 0xfb000000-0xfbffffff: good pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 vgapci0: <VGA-compatible display> mem 0xf4000000-0xf7ffffff,0xfb000000-0xfbffffff irq 16 at device 0.0 on pci1 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf000 re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfdfff000-0xfdfff0ff irq 18 at device 9.0 on pci0 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:30:18:ab:e9:65 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49 re0: [MPSAFE] re0: [FILTER] re1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf200 re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf200-0xf2ff mem 0xfdffe000-0xfdffe0ff irq 19 at device 11.0 on pci0 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re1: bpf attached re1: Ethernet address: 00:30:18:ab:e9:66 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50 re1: [MPSAFE] re1: [FILTER] atapci0: <VIA 6420 SATA150 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f,0xf400-0xf4ff irq 20 at device 15.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 51 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x100 bytes for rid 0x24 type 4 at 0xf400 ata2: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xff00 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe00 ata2: SATA connect status=00000000 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfd00 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfc00 ata3: SATA connect status=00000000 ata3: [MPSAFE] ata3: [ITHREAD] atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 15.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53 ata1: [MPSAFE] ata1: [ITHREAD] uhci0: <VIA 83C572 USB controller> port 0xf900-0xf91f irq 21 at device 16.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf900 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 54 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xf800-0xf81f irq 21 at device 16.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf800 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xf700-0xf71f irq 21 at device 16.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf700 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xf600-0xf61f irq 21 at device 16.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf600 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfdffd000-0xfdffd0ff irq 21 at device 16.4 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfdffd000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 acpi_tz0: <Thermal Zone> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4001 0x4001 0x4001 0x4001 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4001 0x4001 0x4001 0x4001 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55 sio0: [FILTER] sio1: irq maps: 0x4001 0x4009 0x4001 0x4001 sio1: irq maps: 0x4001 0x4009 0x4001 0x4001 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 56 sio1: [FILTER] psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 59 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 50000448 hz Timecounter "TSC" frequency 1200010302 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on 8237 chip ad0: setting UDMA100 on 8237 chip ad0: 29312MB <Maxtor 33073H3 YAH814Y0> at ata0-master UDMA100 ad0: 60032448 sectors [59556C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: VIA check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed acd0: setting PIO4 on 8237 chip acd0: setting UDMA33 on 8237 chip acd0: FAILURE - DEVICE_RESET status=7f<READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=1<ILLEGAL_LENGTH> acd0: <NEC DV-5800A/1.0A> DVDROM drive at ata0 as slave acd0: read 3445KB/s (8268KB/s), 512KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?476D59B6.4030609>