Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 29 Mar 2001 06:45:28 -0800
From:      Mike Smith <msmith@freebsd.org>
To:        Dmitry Valdov <dv@dv.ru>
Cc:        stable@FreeBSD.ORG
Subject:   Re: problem booting 4.3-RC1 (BTX problem) 
Message-ID:  <200103291445.f2TEjSt04795@mass.dis.org>
In-Reply-To: Your message of "Thu, 29 Mar 2001 18:33:18 %2B0400." <Pine.BSF.3.95q.1010329183230.21435A-100000@xkis.kis.ru> 

next in thread | previous in thread | raw e-mail | index | archive | help
> Hi!
> 
> Why not? Linux boots OK :( 

So what?

> May be it's possible to modify BTX for temporary workaround?

As I said:

"This is a known bug in the SRC-U21 and SRC-U31 BIOS, for which there is 
 no solution.  You cannot use these controllers with FreeBSD."

Is that good enough?  If not, you will need to be reasonably familiar 
with the x86 architecture, in particular v86 mode and the various 
services offered by the BIOS for peripheral firmware, and then you should 
take the SRC-U21 BIOS and disassemble it around the code region(s) at 
which it will trap, and then you will understand.

And even if you *did* fix it, there are no drivers for this family of 
controllers *anyway*.

Now you are going to tell me that you bought these controllers and that 
you are upset, unhappy, etc. that FreeBSD won't work with them.  Well, 
you should have read http://people.freebsd.org/~msmith/RAID first.

> Dmitry.
> 
> 
> On Thu, 29 Mar 2001, Mike Smith wrote:
> 
> > Date: Thu, 29 Mar 2001 06:31:25 -0800
> > From: Mike Smith <msmith@FreeBSD.ORG>
> > To: Dmitry Valdov <dv@dv.ru>
> > Cc: stable@FreeBSD.ORG
> > Subject: Re: problem booting 4.3-RC1 (BTX problem) 
> > 
> > 
> > This is a known bug in the SRC-U21 and SRC-U31 BIOS, for which there is 
> > no solution.  You cannot use these controllers with FreeBSD.
> > 
> > > There is a problem booting 4.3-RC1 on server with Intel Server RAID
> > > Controller U2-1(SRCU21) with logical volumes created (without
> > > logical disks everything is OK).
> > > 
> > > 
> > > There is BTX diagnostic:
> > > 
> > > int=0000000d err=00000000 efl=00030006 eip=000006ab
> > > eax=000cc895 ebx=02900116 ecx=00000004 edx=00000080
> > > esi=00003236 edi=00003228 ebp=00000000 esp=000003fa
> > > cs=c900 ds=c900 es=9c80 fs=9c80 gs=9c80 ss=9abe
> > > cs:eip=26 0f 01 14 0f 20 c0 0c-01 0f 22 c0 eb 00 b8 10
> > > ss:esp=0c 32 31 00 90 02 95 09-00 00 02 02 38 91 00 00
> > > BTX halted
> > > 
> > > 
> > > Dmitry.
> > > 
> > > 
> > > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > with "unsubscribe freebsd-stable" in the body of the message
> > 
> > -- 
> > ... every activity meets with opposition, everyone who acts has his
> > rivals and unfortunately opponents also.  But not because people want
> > to be opponents, rather because the tasks and relationships force
> > people to take different points of view.  [Dr. Fritz Todt]
> >            V I C T O R Y   N O T   V E N G E A N C E
> > 
> > 
> > 
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-stable" in the body of the message
> > 
> 

-- 
... every activity meets with opposition, everyone who acts has his
rivals and unfortunately opponents also.  But not because people want
to be opponents, rather because the tasks and relationships force
people to take different points of view.  [Dr. Fritz Todt]
           V I C T O R Y   N O T   V E N G E A N C E



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200103291445.f2TEjSt04795>