Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 9 Jan 1998 15:26:07 -0800 (PST)
From:      Rudy Gireyev <rgireyev@yahoo.com>
To:        Aaron Lamb <aaron@linkexchange.com>
Cc:        freebsd-hardware@freebsd.org
Subject:   Re: Bios
Message-ID:  <19980109232607.25315.rocketmail@send1a.yahoomail.com>

next in thread | raw e-mail | index | archive | help
OK then I'm lost!

I've never heard of such a problem, so I'm moving the question to
-hardware mailing list to see if they can shed some light onto this
situation.

Rudy


---Aaron Lamb <aaron@linkexchange.com> wrote:
>
> Rudy,
> problem with booting. yes
> freebsd installed. yes
> media. ftp
> single disk. scsi
> os. only freebsd
> 
> the actual error is "read error"
> I've removed the drive which I installed freebsd on and tried it in
> another board of the type, same error.  I tried using the same drive
with
> another mother board, different type and different bios, it boots up
fine.
> 
> I'm using all new equipment.
> 
> for some reason it doesn't seem to like the phoenix bios.
> 
> ????????????
> 
> 
> Aaron Lamb
> ------------------------------------------------------
> LinkExchange
> Questions/comments  ---->       admin@linkexchange.com
> Sponsorship info    ---->    sponsors@linkexchange.com
> Web Site URL        ---->  http://www.linkexchange.com
> 
> 
> On Fri, 9 Jan 1998, Rudy Gireyev wrote:
> 
> > ---Aaron Lamb <aaron@linkexchange.com> wrote:
> > >
> > > Rudy,
> > > 
> > > I'm tring to get freebsd runing on an intel board that can handle
> > 512 megs
> > > of ram with a pentium II. 
> > 
> > Aaron this should not be any problem. Quite honestly I was unable to
> > pick out what exact problem was it that you had. You mentioned you
had
> > trouble booting, right?
> > Did you get FreeBSD installed?
> > What media did you use CDROM, DOS partition, FTP ...?
> > Do you have windows95 on this machine.
> > How many disk drives?
> > Is hard disk SCSI or not?
> > 
> > In case you did get it installed and you do not have windows95, i.e.
> > dedicated disk, the install process fails to create a boot.conf on
> > your root file system.
> > So in order to boot the system, you have to type wd(1,a)/kernel at
the
> > boot prompt. If you have SCSI disk then you type sd(1,a)/kernel.
> > 
> > > 
> > > I'm  tring to get the  Intel 440LX AGPset board to work.
> > > Do you have any suggestions to get this to work or another board
> > that is
> > > the similar to the  Intel 440LX AGPset  board.
> > 
> > Correct me if I'm wrong, but is AGP a new display standard or am I
way
> > off here.
> > If it is then FreeBSD wont care because all it does is in text mode.
> > If you plan to install Xwindows though then you'll have to find out
> > whether they support that standard/board.
> > 
> > > 
> > > I would like to stay with intel if possible.
> > > 
> > > 
> > > thanks again.
> > 
> > Of Course. Let me know if this doesn't solve your problem.
> > 
> > > 
> > > 
> > > Aaron Lamb
> > > ------------------------------------------------------
> > > LinkExchange
> > > Questions/comments  ---->       admin@linkexchange.com
> > > Sponsorship info    ---->    sponsors@linkexchange.com
> > > Web Site URL        ---->  http://www.linkexchange.com
> > > 
> > > 
> > > On Thu, 8 Jan 1998, Rudy Gireyev wrote:
> > > 
> > > > Is this a dual OS machine?
> > > > 
> > > > Rudy
> > > > 
> > > > 
> > > > ---Aaron Lamb <aaron@linkexchange.com> wrote:
> > > > >
> > > > > Hi,
> > > > > I'm installing freebsd on a pent. II 300 mhz 256 megs. of ram
> > machine.
> > > > > after the install and the first reboot, I get a "read error".
> > > > > 
> > > > > I'm using a Phoenix mother board.  Bios 4.0 rel. 6.0
> > > > > board # 4A3NT0x0.86A.0047.P0s
> > > > > 
> > > > > I think the problem is with freebsd not being compatible
with this
> > > > bios.
> > > > > 
> > > > > Is there any way to get this installed and usable?? 
> > > > > ????????????
> > > > > 
> > > > > thanks
> > > > > 
> > > > > 
> > > > > Aaron Lamb
> > > > > ------------------------------------------------------
> > > > > LinkExchange
> > > > > Questions/comments  ---->       admin@linkexchange.com
> > > > > Sponsorship info    ---->    sponsors@linkexchange.com
> > > > > Web Site URL        ---->  http://www.linkexchange.com
> > > > > 
> > > > > 
> > > > > 
> > > > 
> > > > _________________________________________________________
> > > > DO YOU YAHOO!?
> > > > Get your free @yahoo.com address at http://mail.yahoo.com
> > > > 
> > > > 
> > > 
> > > 
> > 
> > _________________________________________________________
> > DO YOU YAHOO!?
> > Get your free @yahoo.com address at http://mail.yahoo.com
> > 
> > 
> 
> 

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980109232607.25315.rocketmail>