Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 14 Dec 2017 10:25:35 -0800
From:      Michael Sierchio <kudzu@tenebras.com>
To:        fml <tetrosalame@gmail.com>
Cc:        Polytropon <freebsd@edvax.de>, FreeBSD Questions <freebsd-questions@freebsd.org>,  Mike Tancsa <mike@sentex.net>
Subject:   Re: FreeBSD 11.1 on Soekris NET4501. Storage issue
Message-ID:  <CAHu1Y70fAGY=8FpfE0hFzGezxikHb7rcRCC9P=g2gO4r7M1Dgw@mail.gmail.com>
In-Reply-To: <CAHu1Y71G7OE4z0V166kV-ARKQo-T6xC4C7XH6PUN3jMkTYYegA@mail.gmail.com>
References:  <20171212185233.GA1732@avalon.thwn> <abec4ab7-6d1d-08ef-8286-819aadd3a2ff@sentex.net> <20171213192321.GA1651@avalon.thwn> <e3c5d44d-fdf7-7279-af41-8ac0b698c730@sentex.net> <20171213203512.268d8006.freebsd@edvax.de> <20171214190758.GA1648@avalon.thwn> <CAHu1Y71G7OE4z0V166kV-ARKQo-T6xC4C7XH6PUN3jMkTYYegA@mail.gmail.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Sorry, that got away too fast.

Disable ACPI in /boot/loader.conf, and add a line for the mount device

hint.acpi.0.disabled=3D"1"

vfs.root.mountfrom=3D"ufs:/dev/ada0s1"


>From this I conclude your device is not a GPART but old fashioned
slice/partition disk.


Post your kernconf. You may be missing something.


- M

On Thu, Dec 14, 2017 at 10:20 AM, Michael Sierchio <kudzu@tenebras.com>
wrote:

> IIRC not all CF cards work, but...
>
> Try adding these to /boot/loader.conf
>
> kern.cam.boot_delay=3D"10000"
>
> kern.cam.scsi_delay=3D"5000"
>
> On Thu, Dec 14, 2017 at 11:07 AM, fml <tetrosalame@gmail.com> wrote:
>
>> On Wed, Dec 13, 2017 at 08:35:12PM +0100, Polytropon wrote:
>> >
>> > On my ye olde home PC, I have those in /boot/loader.conf:
>> >
>> >       hw.ata.atapi_dma=3D"1"
>> >       hw.ata.ata_dma=3D"1"
>> >       hw.ata.wc=3D"0"
>> >
>> > Maybe this will help?
>>
>> Thank you and Mike but...no progress.
>> It still can't mount root (ada0s1a) and the list of GEOM managed
>> disk devices is empty.
>>
>> I'm stuck.
>> f.
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to "freebsd-questions-unsubscribe
>> @freebsd.org"
>>
>
>
>
> --
> "Well," Brahma said, "even after ten thousand explanations, a fool is no
> wiser, but an intelligent person requires only two thousand five hundred.=
"
>
> - The Mah=C4=81bh=C4=81rata
>



--=20
"Well," Brahma said, "even after ten thousand explanations, a fool is no
wiser, but an intelligent person requires only two thousand five hundred."

- The Mah=C4=81bh=C4=81rata



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?CAHu1Y70fAGY=8FpfE0hFzGezxikHb7rcRCC9P=g2gO4r7M1Dgw>