Date: Tue, 16 Jan 1996 11:02:01 +0900 From: hansen@ull.rdc.toshiba.co.jp To: bugs@freebsd.org Cc: tkelley@cy.com (Tim M. Kelley), Thomas Graichen <graichen@omega.physik.fu-berlin.de> Subject: Re: Ver 2.1R install: unrecognized ATAPI cdrom Message-ID: <9601160202.AA16120@VLCS150.noname> In-Reply-To: Your message of "Mon, 15 Jan 1996 22:51:53 %2B0100." <199601152151.WAA01223@prospero>
next in thread | previous in thread | raw e-mail | index | archive | help
Thomas Graichen <graichen@omega.physik.fu-berlin.de> said >hasn't Tim M. Kelley said ? ... >> >> Hello all, >> >> The installation (using the ATAPI install floppy) did not recognize my ATAPI >> cdrom, although it recognized the secondary ide connector. I have the CDROM >> configured as master. Here are the configuration specifics: >> >> Pentium 75 Mhz, 32 Mb RAM >> PCI Bus, Intel Motherboard (triton chipset) >> 1.44 Mb floppy >> Western Digital AC31200 IDE drive, >> 1220 Mb master drive on primary IDE >> Maxtor 7213A IDE drive, >> 202 Mb slave drive on primary IDE >> Toshiba ATAPI 4X cdrom on secondary IDE >> Soundblaster 16 at IRQ 5 >> Zoom V.34i 28.8K internal Modem >> >> Primary IDE: IRQ 14, 1F0 address >> Secondary IDE: IRQ 15, 170 address >> > >atapi.flp is configured for first controller/slave only Really? My IDE CDROM is working fine on the second controller. Here is my dmesg for it: . . . wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <WDC AC31000H> wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-5302TA/1095>, removable, intr, iordy wcd0: 689Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray wcd0: 120mm data disc loaded, unlocked . . . It didn't work "out-of-the-box" though. I had to compile a custom kernel with the wd2 and wd3 disks commented out or it would try to recognize my CDROM as a 0MB disk.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9601160202.AA16120>