Date: Thu, 30 Oct 2003 23:23:10 -0800 From: Keith Davis <shadowcrest@comcast.net> To: freebsd-mobile@freebsd.org Subject: ACPI battery status for Compaq Presario 2100 Message-ID: <3FA20DDE.40300@comcast.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------070004020705050408050603
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
I have a laptop that only supports ACPI, not APM, and one of the big
problems with it and FBSD 5.1-CURRENT is that I cannot query the battery
to determine how much battery life I have left.
sysctl hw.acpi doesn't detect when AC is offline ( shows status:
charging ) always, and reports bogus values. I have attached sysctl
hw.acpi output ( report ) and dmesg. I would appreciate any help with
resolving this matter. I will be willing to supply any willing parties
with any additional information they might need to resolve this issue.
Thank you,
Keith
--------------070004020705050408050603
Content-Type: text/plain;
name="report"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="report"
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: S1
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 5
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_poweroff: 1
hw.acpi.cpu.max_speed: 8
hw.acpi.cpu.current_speed: 8
hw.acpi.cpu.performance_speed: 8
hw.acpi.cpu.economy_speed: 4
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 30
hw.acpi.thermal.tz0.temperature: 3212
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 3632
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 3687
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.acline: 1
hw.acpi.battery.life: -1
hw.acpi.battery.time: -1
hw.acpi.battery.state: 7
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
--------------070004020705050408050603
Content-Type: text/plain;
name="boot.msg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="boot.msg"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #1: Sat Oct 25 11:49:41 PDT 2003
kdavis@:/usr/obj/usr/src/sys/ADARA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b0c000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b0c244.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Celeron(R) CPU 1.80GHz (1794.36-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 469172224 (447 MB)
avail memory = 446050304 (425 MB)
Pentium Pro MTRR support enabled
VESA: v2.0, 65472k memory, flags:0x1, mode table:0xc09eb762 (1000022)
VESA: ATI RS200M
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
unknown: I/O range not supported
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 10
pcib0: slot 6 INTA is routed to irq 5
pcib0: slot 18 INTA is routed to irq 10
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0000000-0xd0000fff irq 10 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xd0001000-0xd0001fff irq 5 at device 6.0 on pci0
pcm0: <Conexant CX20468 AC97 Codec>
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> mem 0xd0003000-0xd0003fff at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 10 INTA is routed to irq 11
cbb0: [MPSAFE]
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x2000-0x200f at device 16.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x2400-0x24ff mem 0xd0004000-0xd0004fff irq 10 at device 18.0 on pci0
sis0: Silicon Revision: DP83816A
sis0: Ethernet address: 00:0b:cd:31:63:c0
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdf000-0xdffff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1794355252 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad0 dp=0xc4205d70
ad0: 38154MB <TOSHIBA MK4018GAP> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <TOSHIBA DVD-ROM SD-R2312> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 12 files 6
/tmp: superblock summary recomputed
WARNING: /usr was not properly dismounted
WARNING: /usr/home was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 40 files 10
/var: superblock summary recomputed
Accounting enabled
acpi0: Sleep state S2 not supported by BIOS
--------------070004020705050408050603--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FA20DDE.40300>