Date: Mon, 9 Feb 2004 18:29:18 +0100 From: Wilko Bulte <wkb@freebie.xs4all.nl> To: Ulf Zimmermann <ulf@Alameda.net> Cc: freebsd-stable@freebsd.org Subject: Re: HP DL380 lockup using 4.9-RELEASE-p1 Message-ID: <20040209172918.GA8826@freebie.xs4all.nl> In-Reply-To: <20040209165212.GB89845@seven.alameda.net> References: <20040209035956.GA97435@gsmx07.alcatel.com.au> <20040209052034.GB35546@gsmx07.alcatel.com.au> <20040209165212.GB89845@seven.alameda.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Feb 09, 2004 at 08:52:13AM -0800, Ulf Zimmermann wrote: > On Mon, Feb 09, 2004 at 04:20:34PM +1100, Peter Jeremy wrote: > > On 2004-Feb-09 14:59:56 +1100, Peter Jeremy <peter.jeremy@alcatel.com.au> wrote: > > >I have an HP DL380 that has taken to locking up hard (no messages and > > >no response to keyboard, mouse or network) since I installed 4.9p1. > > > > Slight correction. Ctrl-Alt-Esc does enter the debugger but it takes > > about 1/2hr to get to the 'db> ' prompt (spitting out 1 character every > > N seconds). I've requested a "panic" but I'm not sure if this will > > respond before my colleague has to give up and reset it. > > > > This sounds like some sort of interrupt storm. Any ideas on how to > > silence it long enough to make DDB respond? > > If the machine is 3000km away, why is the iLO port not hooked up ? Maybe because it does not have a RIB board? Remember that the DL380 only has that as an option. -- Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040209172918.GA8826>