Date: Tue, 03 Nov 1998 22:38:42 -0600 From: Bill Hamilton <bhamil@cmpu.net> To: freebsd questions <freebsd-questions@FreeBSD.ORG> Cc: brian@Awfulhak.org Subject: ppp Message-ID: <363FDA52.BBB2F3A5@cmpu.net>
next in thread | raw e-mail | index | archive | help
This is 2.2.7 When I start ppp -background provider, I get errors on adding and deleting route (see ppp.log at bottom). I can ping servers and ftp ok, so I guess I'm ok. I just wondered with these errors pop up. I followed the handbook examples. netstat -rn gives: Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 205.241.182.254 UGSc 0 0 tun0 127.0.0.1 127.0.0.1 UH 0 0 lo0 205.241.182.254 204.181.96.5 UH 1 0 tun0 This is end of ppp.log : Nov 4 02:50:41 bronco ppp[301]: Command: default: set device /dev/cuaa0 Nov 4 02:50:41 bronco ppp[301]: Command: default: set speed 115200 Nov 4 02:50:41 bronco ppp[301]: Command: default: disable pred1 Nov 4 02:50:41 bronco ppp[301]: Command: default: deny pred1 Nov 4 02:50:41 bronco ppp[301]: Command: default: disable lqr Nov 4 02:50:41 bronco ppp[301]: Command: default: deny lqr Nov 4 02:50:41 bronco ppp[301]: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT Nov 4 02:50:41 bronco ppp[301]: tun0: Phase: Using interface: tun0 Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set phone (214)741-4039 Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set login Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set authname bhamil Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set authkey ******** Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set timeout 0 Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: delete ALL Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: add 0 0 HISADDR Nov 4 02:50:41 bronco ppp[302]: tun0: Phase: PPP Started. Nov 4 02:50:41 bronco ppp[302]: tun0: Phase: Connected! Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Dial attempt 1 of 1 Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Expecting: Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Sending: AT^M Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Expecting: OK-AT-OK Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Wait for (5): OK Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: ^M Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: OK Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Sending: ATE1Q0^M Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Expecting: OK Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Wait for (5): OK Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: ^M Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: ^M Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: OK Nov 4 02:50:43 bronco ppp[302]: tun0: Phase: Phone: (214)741-4039 Nov 4 02:50:43 bronco ppp[302]: tun0: Chat: Sending: ATDT(214)741-4039^M Nov 4 02:50:43 bronco ppp[302]: tun0: Chat: Expecting: CONNECT Nov 4 02:50:43 bronco ppp[302]: tun0: Chat: Wait for (40): CONNECT Nov 4 02:50:43 bronco ppp[302]: tun0: Connect: ^M Nov 4 02:50:45 bronco ppp[302]: tun0: Connect: ATDT(214)741-4039^M^M Nov 4 02:50:45 bronco ppp[302]: tun0: Connect: CONNECT Nov 4 02:50:45 bronco ppp[302]: tun0: IPCP: Using trigger address 0.0.0.0 Nov 4 02:50:45 bronco ppp[302]: tun0: LCP: State change Initial --> Closed Nov 4 02:50:45 bronco ppp[302]: tun0: LCP: State change Closed --> Stopped Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: LcpSendConfigReq Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACFCOMP[2] Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: PROTOCOMP[2] Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACCMAP[6] 0x00000000 Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: MRU[4] 1500 Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: MAGICNUM[6] 0x0256449e Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: State change Stopped --> Req-Sent Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: Received Configure Request (0) state = Req-Sent (6) Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: MRU[4] 1526 Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: PROTOCOMP[2] Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACFCOMP[2] Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACCMAP[6] 0x00000000 Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: SendConfigAck(Req-Sent) Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: MRU[4] 1526 Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: PROTOCOMP[2] Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACFCOMP[2] Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACCMAP[6] 0x00000000 Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: State change Req-Sent --> Ack-Sent Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: Received Configure Ack (1) state = Ack-Sent (8) Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: State change Ack-Sent --> Opened Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: LcpLayerUp Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: NewPhase: Authenticate Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: his = PAP, mine = none Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: PAP: bhamil Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: PapInput: ACK Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: Received PAP_ACK () Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: NewPhase: Network Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: State change Initial --> Closed Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IPCP Up event!! Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IpcpSendConfigReq Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IPADDR[6] 0.0.0.0 Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: State change Closed --> Req-Sent Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: State change Initial --> Closed Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: CCP Up event!! Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: CcpSendConfigReq Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: DEFLATE[4] win 15 Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: State change Closed --> Req-Sent Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: Received Configure Request (1) state = Req-Sent (6) Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IPADDR[6] 205.241.182.254 Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: SendConfigAck(Req-Sent) Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IPADDR[6] 205.241.182.254 Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: State change Req-Sent --> Ack-Sent Nov 4 02:50:48 bronco ppp[302]: tun0: IPCP: Received Configure Request (2) state = Ack-Sent (8) Nov 4 02:50:48 bronco ppp[302]: tun0: IPCP: IPADDR[6] 205.241.182.254 Nov 4 02:50:48 bronco ppp[302]: tun0: IPCP: SendConfigAck(Ack-Sent) Nov 4 02:50:48 bronco ppp[302]: tun0: IPCP: IPADDR[6] 205.241.182.254 Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IpcpSendConfigReq Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] 0.0.0.0 Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres Nov 4 02:50:49 bronco ppp[302]: tun0: CCP: CcpSendConfigReq Nov 4 02:50:49 bronco ppp[302]: tun0: CCP: DEFLATE[4] win 15 Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: Received Configure Reject (2) state = Ack-Sent (8) Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: RecvConfigRej. Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IpcpSendConfigReq Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] 0.0.0.0 Nov 4 02:50:49 bronco ppp[302]: tun0: LCP: Received Protocol Reject (1) state = Opened (9) Nov 4 02:50:49 bronco ppp[302]: tun0: LCP: -- Protocol (80fd) was rejected. Nov 4 02:50:49 bronco ppp[302]: tun0: CCP: CcpLayerFinish. Nov 4 02:50:49 bronco ppp[302]: tun0: CCP: State change Req-Sent --> Stopped Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: Received Configure Nak (3) state = Ack-Sent (8) Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] 204.181.96.5 Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 204.181.96.5 Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IpcpSendConfigReq Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] 204.181.96.5 Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: Received Configure Ack (4) state = Ack-Sent (8) Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: State change Ack-Sent --> Opened Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IpcpLayerUp(9). Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: myaddr = 204.181.96.5 hisaddr = 205.241.182.254 Nov 4 02:50:49 bronco ppp[301]: tun0: Phase: Parent: PPP enabled. Nov 4 02:50:49 bronco ppp[302]: tun0: Phase: Parent notified of success. Nov 4 02:50:49 bronco ppp[302]: tun0: LCP: OsLinkup: 205.241.182.254 Nov 4 02:50:49 bronco ppp[302]: tun0: Command: MYADDR: delete 0 Nov 4 02:50:49 bronco ppp[302]: tun0: Warning: Del route failed: 0.0.0.0: Non-existent Nov 4 02:50:49 bronco ppp[302]: tun0: Command: MYADDR: add 0 0 HISADDR To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?363FDA52.BBB2F3A5>