Date: Mon, 16 Jun 2014 23:43:07 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-net@FreeBSD.org Subject: [Bug 184311] [bge] [panic] kernel panic with bge(4) on SunFire X2100 Message-ID: <bug-184311-2472-Eqyi9KREv0@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-184311-2472@https.bugs.freebsd.org/bugzilla/> References: <bug-184311-2472@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=184311 Miroslav Lachman <000.fbsd@quip.cz> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |000.fbsd@quip.cz --- Comment #4 from Miroslav Lachman <000.fbsd@quip.cz> --- Are you talking about SunFire X2100 or SunFire X2100 M2? Because "X2100" (withou M2) has only one bge NIC identified as BCM5721 and one nVidia CK804 NIC. "X2100 M2" has two bge BCM5714 and two nfe NVIDIA nForce MCP55 Networking Adapter X2100 M2 - FreeBSD 8.4-RELEASE-p9 i386 GENERIC from /var/run/dmesg.boot bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 4.0 on pci6 bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz miibus2: <MII bus> on bge0 brgphy0: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:1b:24:xx:xx:xx bge0: [ITHREAD] bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at device 4.1 on pci6 bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz miibus3: <MII bus> on bge1 brgphy1: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus3 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:1b:24:xx:xx:xx bge1: [ITHREAD] pciconf bge0@pci0:6:4:0: class=0x020000 card=0x534c108e chip=0x167814e4 rev=0xa3 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5715C 10/100/100 PCIe Ethernet Controller' class = network subclass = ethernet bge1@pci0:6:4:1: class=0x020000 card=0x534c108e chip=0x167814e4 rev=0xa3 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5715C 10/100/100 PCIe Ethernet Controller' class = network subclass = ethernet Note that pciconf says BCM5715C while dmesg shows BCM5714 X2100 M2 - FreeBSD 9.2-RELEASE-p5 amd64 GENERIC bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 4.0 on pci6 bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz miibus2: <MII bus> on bge0 brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:1e:68:xx:xx:xx bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at device 4.1 on pci6 bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz miibus3: <MII bus> on bge1 brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus3 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:1e:68:xx:xx:xx pciconf bge0@pci0:6:4:0: class=0x020000 card=0x534c108e chip=0x167814e4 rev=0xa3 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5715 Gigabit Ethernet' class = network subclass = ethernet bge1@pci0:6:4:1: class=0x020000 card=0x534c108e chip=0x167814e4 rev=0xa3 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5715 Gigabit Ethernet' class = network subclass = ethernet I am running "X2100 M2" without any problems on FreeBSD 8.4 and 9.2 -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-184311-2472-Eqyi9KREv0>