Date: Tue, 19 Feb 2002 03:59:30 +0900 From: Javi Lavandeira <ag0ny@ag0ny.com> To: freebsd-questions@freebsd.org Subject: No sound on FreeBSD 4.4-RELEASE on Compaq Presario 700 Message-ID: <3C714F12.60CDBE29@ag0ny.com>
next in thread | raw e-mail | index | archive | help
Hello, I have a Compaq Presario 700 (actually, a 703JP), running FreeBSD 4.4-RELEASE. I built the kernel with "device pcm", and the sound card is detected when the system boots: pcm0: <VIA VT82C686A> port 0x1850-0x1853,0x1854-0x1857,0x1000-0x10ff irq 5 at device 7.5 on pci0 /dev/sndstat shows this: cosmos:~# cat /dev/sndstat FreeBSD Audio Driver (newpcm) Feb 16 2002 11:50:00 Installed devices: pcm0: <VIA VT82C686A> at io 0x1000 irq 5 (1p/1r/0v channels duplex) And I set the mixer to the following values: cosmos:~# mixer Mixer vol is currently set to 100:100 Mixer pcm is currently set to 100:100 Mixer speaker is currently set to 100:100 Mixer line is currently set to 0:0 Mixer mic is currently set to 0:0 Mixer cd is currently set to 100:100 Mixer rec is currently set to 0:0 Mixer line1 is currently set to 0:0 Mixer phin is currently set to 0:0 Mixer phout is currently set to 0:0 Mixer video is currently set to 100:100 Mixer monitor is currently set to 100:100 My problem is that I cannot hear any sound. I run xmms on an MP3 file, and the spectrum analyzer starts moving, but no sound gets out of the speakers. Not even when I use cdcontrol to play audio CDs. Sound works correctly on Windows XP in another partition on the same machine. Any ideas on what could be the problem? Thanks in advance, -- Javi Lavandeira (ag0ny@ag0ny.com) - http://www.ag0ny.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C714F12.60CDBE29>