Date: Sun, 30 Jun 2002 18:53:33 -0700 (PDT) From: "Steve O'Brien" <smo232@nyu.edu> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/40058: lockup on 5.0 DP1 - Xircom X3201 (RealPort 2 Cardbus Ethernet), dc driver Message-ID: <200207010153.g611rX7V037483@www.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 40058 >Category: kern >Synopsis: lockup on 5.0 DP1 - Xircom X3201 (RealPort 2 Cardbus Ethernet), dc driver >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jun 30 19:00:06 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Steve O'Brien >Release: 5.0 DP 1 >Organization: >Environment: FreeBSD 5.0-DP1 FreeBSD 5.0-DP1 #1: Sun Jun 30 20:36:13 GMT 2002 root@/usr/src/sys/i386/compile/OBRIEN1 i386 >Description: System seems to lock up completely upon boot & initialization of Xircom RealPort2 Cardbus card (R2BE-100), or upon insertion later and loading of the dc driver. Using the NEWCARD config (but copied to another file named OBRIEN1 on my machine), no changes made. Some output from dmesg: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-DP1 #1: Sun Jun 30 20:36:13 GMT 2002 root@:/usr/src/sys/i386/compile/OBRIEN1 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0569000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05690a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 447691917 Hz CPU: Pentium III/Pentium III Xeon/Celeron (447.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134152192 (131008K bytes) avail memory = 124813312 (121888K bytes) Pentium Pro MTRR support enabled Using $PIR table, 8 entries at 0xc00fdf40 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard acpi0: power button is handled as a fixed feature programming model. ACPI timer looks BAD min = 2, max = 6, width = 5 ACPI timer looks BAD min = 2, max = 6, width = 5 ACPI timer looks BAD min = 2, max = 16777211, width = 16777210 ACPI timer looks BAD min = 2, max = 6, width = 5 ACPI timer looks BAD min = 2, max = 16777211, width = 16777210 ACPI timer looks BAD min = 2, max = 6, width = 5 ACPI timer looks BAD min = 1, max = 6, width = 6 ACPI timer looks BAD min = 2, max = 6, width = 5 ACPI timer looks BAD min = 2, max = 6, width = 5 ACPI timer looks BAD min = 2, max = 6, width = 5 Timecounter "ACPI-safe" frequency 3579545 Hz can't fetch resources for \\_SB_.PCI0.ISA_.FIR_ - AE_AML_INVALID_RESOURCE_TYPE acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x10c0-0x10cf at device 2.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 11 at device 2.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 2.3 (no driver attached) pccbb0: <TI1251B PCI-CardBus Bridge> mem 0x10000000-0x10000fff irq 11 at device 3.0 on pci0 cardbus0: <CardBus bus> on pccbb0 pccard0: <16-bit PCCard bus> on pccbb0 pccbb1: <TI1251B PCI-CardBus Bridge> mem 0x20000000-0x20000fff irq 11 at device 3.1 on pci0 cardbus1: <CardBus bus> on pccbb1 pccard1: <16-bit PCCard bus> on pccbb1 pci0: <simple comms> at device 6.0 (no driver attached) pci0: <multimedia, audio> at device 7.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 ppc0 port 0x3bc-0x3c3 irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33 acd0: CDROM <CRN-8241B> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a ad0s1: raw partition size != slice size ad0s1: start 63, end 64259, size 64197 ad0s1c: start 63, end 23567354, size 23567292 ad0s1: truncating raw partition ad0s1: rejecting partition in BSD label: it isn't entirely within the slice ad0s1: start 63, end 64259, size 64197 ad0s1a: start 63, end 22364222, size 22364160 ad0s1: rejecting partition in BSD label: it isn't entirely within the slice ad0s1b: start 22364223, end 23567354, size 1203132 WARNING: / was not properly dismounted acpi_tz0: WARNING - current temperature (67.0C) exceeds system limits pccbb1: bad Vcc request. ctrl=0x33, status=0x30000b20 pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11] Product version: 7.0 Product name: Xircom | RealPort2 CardBus Ethernet 10/100 | R2BE-100BTX | 1.00 | Manufacturer ID: 0501030181 Functions: Network Adaptor, Multi-Functioned Function Extension: 04060010a4ec8d7a Function Extension: 0102 Function Extension: 0280969800 Function Extension: 0200e1f505 Function Extension: 0301 Function Extension: 0501 cardbus1: Invalid BAR number: 27(06) CIS reading done cardbus1: <unknown card> (vendor=0x115d, dev=0x0003) at 0.0 irq 11 pccbb1: bad Vcc request. ctrl=0x0, status=0x30000b68 pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb1: CardBus card activation failed When driver loaded, it said (before locking up completely): dc0: <Xircom X3201 10/100BaseTX> port 0x1080-0x10ff mem 0x84000000-0x840007ff, 0x84000800-0x84000fff irq 11 at device 0.0 on cardbus1 dc0: Ethernet address: 00:00:00:00:28:00 The card's PCI vendor/device fields are 115d:0003, as reported. The MAC address of the card is 00:10:A4:EC:8D:7A (although listed as 00:00:00:00:28:00), which is hinted at under one of the Function Extension lines... >How-To-Repeat: System seems to lock up completely upon boot & initialization of Xircom RealPort2 Cardbus card (R2BE-100), or upon insertion later and loading of the dc driver (either with "ifconfig dc0 create" or "kldload") >Fix: Maybe CIS is read wrong, or MAC address & other registers not where expected? Don't know really... :( >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207010153.g611rX7V037483>