Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 30 May 2008 13:48:15 +0530
From:      "Rajkumar S" <rajkumars@gmail.com>
To:        freebsd-net@freebsd.org
Subject:   Re: anyone tried the Multi routing table code yet?
Message-ID:  <64de5c8b0805300118v3874ec3bx2b2978a80bae08b8@mail.gmail.com>
In-Reply-To: <483763B5.4030205@elischer.org>
References:  <483763B5.4030205@elischer.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, May 24, 2008 at 6:09 AM, Julian Elischer <julian@elischer.org> wrote:
> subject says it all really..

I am using pf and rtable to setfib and get an pfctl: DIOCADDRULE:
Device busy when trying to load "pass in quick on fxp0 from any to any
keep state rtable 1"

I can successfully load "pass in quick on fxp0 all flags S/SA keep
state rtable 0" I am testing on FreeBSD CURRENT.

My routing tables are:


[root@daemon /etc]# setfib -0 netstat -nrf inet
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            192.168.3.100      UGS         0     2025   fxp0
127.0.0.1          127.0.0.1          UH          0        0    lo0
192.168.3.0/24     link#1             UC          0        0   fxp0
192.168.3.54       00:40:f4:b7:d7:ee  UHLW        1       40   fxp0   1179
192.168.3.100      00:80:48:38:1a:df  UHLW        2      149   fxp0   1173
192.168.4.0/24     link#1             UC          0        0   fxp0
192.168.4.4        00:80:48:1f:48:26  UHLW        1      141   fxp0   1120
192.168.5.0/24     link#3             UC          0        0   rue0
[root@daemon /etc]# setfib -1 netstat -nrf inet
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            192.168.5.4        UGS         0       13   rue0
127.0.0.1          127.0.0.1          UH          0        0    lo0
192.168.3.0/24     link#1             UC          0        0   fxp0
192.168.3.54       00:40:f4:b7:d7:ee  UHLW        1        0   fxp0   1176
192.168.3.100      00:80:48:38:1a:df  UHLW        1        5   fxp0   1170
192.168.4.0/24     link#1             UC          0        0   fxp0
192.168.4.4        00:80:48:1f:48:26  UHLW        1        0   fxp0   1117
192.168.5.0/24     link#3             UC          0        0   rue0

btw, does the rtable syntax allow to set route for packets generated
by the pf host itself (like packets from squid). The catch is that
they cannot be matched via a "pass in" rule, they are matched only on
a "pass out" rule.

Thanks and regards,

raj



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?64de5c8b0805300118v3874ec3bx2b2978a80bae08b8>