Date: Sat, 7 Aug 2004 12:19:49 +0300 From: "Mogilny I. Aleksandr" <sg@astral.ntu-kpi.kiev.ua> To: Marcel Moolenaar <marcel@xcllnt.net> Cc: freebsd-ia64@freebsd.org Subject: Re: FreeBSD-RELEASE-5.2.1-ia64 installation problem Message-ID: <20040807091949.GA84904@astral.ntu-kpi.kiev.ua> In-Reply-To: <20040807072415.GA91910@dhcp50.pn.xcllnt.net> References: <20040807065913.GA82582@astral.ntu-kpi.kiev.ua> <20040807072415.GA91910@dhcp50.pn.xcllnt.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--DocE+STaALJfprDB Content-Type: text/plain; charset=koi8-r Content-Disposition: inline Content-Transfer-Encoding: 8bit Колись давно, числа десь Sat, Aug 07, 2004 at 12:24:15AM -0700 Marcel Moolenaar мен╕ писав > On Sat, Aug 07, 2004 at 09:59:13AM +0300, Mogilny I. Aleksandr wrote: > > Hello, > > I have a subject problem. I have downloaded all iso files from ftp site, > > written them with burncd on othe unix machine (FreeBSD-4.9) but any of > > cd didn't boot. > > Please describe your hardware. > Thereis a dmesg file in attachment --DocE+STaALJfprDB Content-Type: text/plain; charset=koi8-r Content-Disposition: attachment; filename=dmesg Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #0: Sun Jul 18 13:08:29 GMT 2004 root@asd:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2405.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2147418112 (2097088K bytes) avail memory = 2086125568 (2037232K bytes) Changing APIC ID for IO APIC #0 from 0 to 4 on chip Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 4, version: 0x00178020, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0556000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 13 entries at 0xc00fde60 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard IOAPIC #0 intpin 16 -> irq 2 IOAPIC #0 intpin 19 -> irq 5 IOAPIC #0 intpin 18 -> irq 9 IOAPIC #0 intpin 23 -> irq 11 IOAPIC #0 intpin 17 -> irq 16 pci0: <PCI bus> on pcib0 agp0: <Intel 82875P host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=8086 device=2579)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 5159 graphics accelerator> at 0.0 irq 2 pcib2: <PCI to PCI bridge (vendor=8086 device=257b)> at device 3.0 on pci0 pci2: <PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xa000-0xa01f mem 0xfc000000-0xfc01ffff irq 9 at device 1.0 on pci2 em0: Speed:N/A Duplex:N/A uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 2 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 5 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc400-0xc41f irq 9 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xc800-0xc81f irq 2 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <USB controller> at 29.7 irq 11 pcib3: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 IOAPIC #0 intpin 21 -> irq 17 pci3: <PCI bus> on pcib3 pci3: <unknown card> (vendor=0x105a, dev=0x3373) at 4.0 irq 11 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xbc00-0xbc7f mem 0xfb020000-0xfb02007f irq 17 at device 9.0 on pci3 xl0: Ethernet address: 00:02:3e:f3:89:ef miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 2 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 16 pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 16 orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xccfff,0xd5000-0xd57ff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! ad0: 19092MB <WDC WD200BB-53DEA0> [38792/16/63] at ata0-master UDMA100 acd0: CD-RW <SONY CD-RW CRX230E> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a em0: Link is up 100 Mbps Full Duplex arp: 00:01:80:0a:24:e3 is using my IP address 192.168.0.1! arp: 192.168.0.181 moved from 00:50:70:54:03:39 to 00:01:80:0a:24:e3 on em0 arp: 192.168.0.181 moved from 00:01:80:0a:24:e3 to 00:50:70:54:03:39 on em0 pid 35191 (ftp), uid 0 on /: file system full --DocE+STaALJfprDB--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040807091949.GA84904>