Date: Mon, 13 Oct 2014 13:11:00 -0400 From: David Cross <dcrosstech@gmail.com> To: freebsd-sparc64@freebsd.org Subject: silicon image 3124 data corruption with siis driver (10.0 RELEASE, GENERIC) (update) Message-ID: <CAM9edeNFX8xPPM1q7m38_6WYQ-iBE3DqAYZsS_k2KAKbMAnRUw@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Ok, I had a chance to do a bit more research.
1) confirmed 10.1-RC2/sparc64 still has the problem (it does)
2) confirmed 10.0/amd64 doesn't have the problem (it doesn't)
3) attempting to verify with linux or openbsd.. (in progress, this is
actually pretty tough to do, I had a spare machine that I installed freebsd
onto for testing, and tried and failed to install linux about 5 times now..
ubuntu 10.04 (last LTS to 'support' this hardware chokes instantly on
install (reported problem since 8.04, and debian 7.6 has locked 3 times on
install now... freebsd runs 100% on it; trying openbsd 5.5 next)
In researching similar problems I found that sometimes these cards need
help from their BIOS to init correctly, so I grabbed the PCI config space
from the amd64 and sparc64 installs:
Ultra10 PCI Config Space:
95 10 24 31 87 00 b0 02 01 00 04 01 10 40 00 00
04 20 00 00 00 00 00 00 04 80 00 00 00 00 00 00
01 04 00 00 00 00 00 00 00 00 00 00 95 10 24 71
00 00 08 00 64 00 00 00 00 00 00 00 10 01 00 00
07 54 52 00 f8 ff c3 12 00 00 00 00 00 00 00 00
00 00 00 00 05 00 80 00 00 00 00 00 00 00 00 00
00 00 00 00 01 40 22 06 00 20 00 19 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
amd64 config space:
95 10 24 31 87 04 b0 02 01 00 04 01 10 00 00 00
04 f0 8f fd 00 00 00 00 04 00 8f fd 00 00 00 00
01 ef 00 00 00 00 00 00 00 00 00 00 95 10 24 71
00 00 00 00 64 00 00 00 00 00 00 00 12 01 00 00
07 54 52 00 f8 ff c3 12 00 00 00 00 00 00 00 00
00 00 00 00 05 00 81 00 00 10 e0 fe 00 00 00 00
36 00 00 00 01 40 22 06 00 20 00 19 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
The only real difference I noticed here is the latency timer on amd64 is
set correctly (per the silicon image 3124 programming referece) to 0; on
sparc64 its set to 0x40 (the PCI-X value). I updated that with pciconf -w
-b siis0 13 0x00 and still had the problem, I looked at other chips on the
PCI bus (hme0) and they had it set to 0x50.. which I tried. Neither value
resolved the issue (can I update it on the fly like that, or does it need
to be in the driver as part of the init routine?
Additionally I grabbed an example of the differences between solo and
shared output of the card; the pattern is really bizarre and not what I
would expect:
Given the test methodology of:
dd bs=126b if=/dev/ada1 count=4096 of=somefile
and then running:
dd bs=126b if=/dev/ada1 of=/dev/null
in the background I 'hd' the resulting 'somefiles' and diff them; the
results are included below:
--- ada1.solo.hd 2014-10-02 18:26:18.000000000 +0000
+++ ada1.new.hd 2014-10-02 18:15:04.000000000 +0000
0086e010 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
0086e020 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
0086e030 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
0086e040 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
-0086e050 xx xx xx xx xx xx xx xx xx xx xx xx 3b 5f 79 67
+0086e050 xx xx xx xx xx xx xx xx xx xx xx xx 00 00 15 00
0086e060 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[for the sake of brevity I will only show the differences]
-0108d050 xx xx xx xx xx xx xx xx xx xx xx xx f6 68 c2 9a
+0108d050 xx xx xx xx xx xx xx xx xx xx xx xx 0b 71 f6 71
-0149c880 xx xx xx xx 3c 9a 34 0f xx xx xx xx xx xx xx xx
+0149c880 xx xx xx xx 1f d8 dd 9f xx xx xx xx xx xx xx xx
-02bde500 xx xx xx xx 52 71 27 93 xx xx xx xx xx xx xx xx
+02bde500 xx xx xx xx 61 50 85 d7 xx xx xx xx xx xx xx xx
-02fcdd40 xx xx xx xx xx xx xx xx xx xx xx xx a6 96 34 59
+02fcdd40 xx xx xx xx xx xx xx xx xx xx xx xx 2c e4 ec d0
Contrary to those examples, I have seen the 'corruption' be not 32bit
aligned, I have seen it span the 0x08 boundary as well as the 0x10 boundary
(though that was under a different testing methodology, that was when I
noticed the issue on a live FS that led me down this path). The blocksize
of 126b (picked because its close to 64k, and is an even multiple of
standard ATA sector sizes) is a hex 0xfc00, so these aren't even all in the
same location within a block; which would be a single DMA transfer?
The first corruption of '00 00 15 00' seems especially odd since its not
obviously 'random'; it looks like a command (like an ATA command?) that
somehow got mixed into the datastream.
Anyway; does anyone have pointers for where to look next on tracking this
down? Frustrating having this so close to working!
(oh, as promised a dmesg with verbose boot):
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RC2 #0 r272876: Fri Oct 10 05:25:28 UTC 2014
root@releng1.nyi.freebsd.org:/usr/obj/sparc64.sparc64/usr/src/sys/GENERIC
sparc64
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e76000.
real memory = 402653184 (384 MB)
avail memory = 370155520 (353 MB)
machine: SUNW,Ultra-5_10
cpu0: Sun Microsystems UltraSparc-IIi Processor (270.00 MHz CPU)
mask=0x12 maxtl=5 maxwin=7
ULE: setup cpu 0
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 'isp_1000' version 1: 20142 bytes loaded at 0xc090acc8
ispfw: registered firmware <isp_1000>
firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xc090fb76
ispfw: registered firmware <isp_1040>
firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0xc0915516
ispfw: registered firmware <isp_1040_it>
firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xc091d5c4
ispfw: registered firmware <isp_1080>
firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0xc092503a
ispfw: registered firmware <isp_1080_it>
firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xc092eefe
ispfw: registered firmware <isp_12160>
firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0xc0935c90
ispfw: registered firmware <isp_12160_it>
firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xc093fb2c
ispfw: registered firmware <isp_2100>
firmware: 'isp_2200' version 1: 77214 bytes loaded at 0xc095270e
ispfw: registered firmware <isp_2200>
firmware: 'isp_2300' version 1: 113630 bytes loaded at 0xc09654ac
ispfw: registered firmware <isp_2300>
firmware: 'isp_2322' version 1: 120466 bytes loaded at 0xc098108a
ispfw: registered firmware <isp_2322>
firmware: 'isp_2400' version 1: 179908 bytes loaded at 0xc09a2284
ispfw: registered firmware <isp_2400>
firmware: 'isp_2400_multi' version 1: 198628 bytes loaded at 0xc09db0dc
ispfw: registered firmware <isp_2400_multi>
firmware: 'isp_2500' version 1: 142704 bytes loaded at 0xc0a193a8
ispfw: registered firmware <isp_2500>
firmware: 'isp_2500_multi' version 1: 169352 bytes loaded at 0xc0a4b290
ispfw: registered firmware <isp_2500_multi>
mem: <memory>
null: <null device, zero device>
nfslock: pseudo-device
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
kbd0 at kbdmux0
openfirm: <Open Firmware control device>
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> mem
0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0x1fe010000ff irq
2032,2030,2031,2021 on nexus0
pcib0: Sabre, impl 0, version 0, IGN 0x1f, bus A, 66MHz
pcib0: DVMA map: 0xc0000000 to 0xc3ffffff 8192 entries
pcib0: PROM IOTSB size: 7 (131072 entries)
pcib0: bus range 0 to 2; PCI bus 0
initalizing intr_countp
pcib0: [GIANT-LOCKED]
pci0: <OFW PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x108e, dev=0xa000, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x108e, dev=0x5000, revid=0x11
domain=0, bus=0, slot=1, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x23 (8750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x108e, dev=0x5000, revid=0x11
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x23 (8750 ns), maxlat=0x00 (0 ns)
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc00000-0xdfffff, 0xe00000-0xffffff
pcib1: memory decode 0xe0000000-0xffffffff
pci1: <OFW PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x108e, dev=0x1000, revid=0x01
domain=0, bus=1, slot=1, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250
ns)
map[10]: type Memory, range 32, base 0xf0000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xf0000000-0xf0ffffff
map[14]: type Memory, range 32, base 0xf1000000, size 23, enabled
pcib1: device (null) requested decoded memory range 0xf1000000-0xf17fffff
found-> vendor=0x108e, dev=0x1001, revid=0x01
domain=0, bus=1, slot=1, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250
ns)
map[10]: type Memory, range 32, base 0xe0000000, size 15, memory
disabled
pcib1: device (null) requested decoded memory range 0xe0000000-0xe0007fff
found-> vendor=0x1002, dev=0x4754, revid=0x9a
domain=0, bus=1, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0080, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type Memory, range 32, base 0xe1000000, size 24, memory
disabled
pcib1: device (null) requested decoded memory range 0xe1000000-0xe1ffffff
map[14]: type I/O Port, range 32, base 0, size 8, port disabled
pcib1: device (null) requested unsupported I/O range 0x0-0xff
pci1: pci0:1:2:0 bar 0x14 failed to allocate
map[18]: type Memory, range 32, base 0, size 12, enabled
pcib1: device (null) requested unsupported memory range 0x0-0xfff
pci1: pci0:1:2:0 bar 0x18 failed to allocate
found-> vendor=0x1095, dev=0x0646, revid=0x03
domain=0, bus=1, slot=3, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
map[10]: type I/O Port, range 32, base 0xc00000, size 3, enabled
pcib1: device (null) requested decoded I/O range 0xc00000-0xc00007
map[14]: type I/O Port, range 32, base 0xc00008, size 2, enabled
pcib1: device (null) requested decoded I/O range 0xc00008-0xc0000b
map[18]: type I/O Port, range 32, base 0xc00010, size 3, enabled
pcib1: device (null) requested decoded I/O range 0xc00010-0xc00017
map[1c]: type I/O Port, range 32, base 0xc00018, size 2, enabled
pcib1: device (null) requested decoded I/O range 0xc00018-0xc0001b
map[20]: type I/O Port, range 32, base 0xc00020, size 4, enabled
pcib1: device (null) requested decoded I/O range 0xc00020-0xc0002f
ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff
at device 1.0 on pci1
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 255
pcib2: I/O decode 0x0-0x1fffff, 0x200000-0x3fffff,
0x400000-0x5fffff, 0x600000-0x7fffff, 0x800000-0x9fffff, 0xa00000-0xbfffff
pcib2: memory decode 0x0-0x1fffffff, 0x20000000-0x3fffffff,
0x40000000-0x5fffffff, 0x60000000-0x7fffffff, 0x80000000-0x9fffffff,
0xa0000000-0xbfffffff
pci2: <OFW PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x1095, dev=0x3124, revid=0x01
domain=0, bus=2, slot=1, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0080, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0x2000, size 7, memory
disabled
pcib2: device (null) requested decoded memory range 0x2000-0x207f
map[18]: type Memory, range 64, base 0x8000, size 15, enabled
pcib2: device (null) requested decoded memory range 0x8000-0xffff
map[20]: type I/O Port, range 32, base 0x400, size 4, port disabled
pcib2: device (null) requested decoded I/O range 0x400-0x40f
auxio0: <Sun Auxiliary I/O> addr
0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003
on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
scc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f
irq 43 on ebus0
scc0: not resetting hardware
uart0: <SAB 82532 v3.2, channel A> on scc0
uart0: CTS oflow
uart0: console (9600,n,8,1)
uart0: fast interrupt
uart1: <SAB 82532 v3.2, channel B> on scc0
uart1: CTS oflow
uart1: fast interrupt
scc0: fast interrupt
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: keyboard (1200,n,8,1)
uart2: fast interrupt
uart2: keyboard not present
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
uart3: fast interrupt
ebus0: <ecpp> addr
0x14003043bc-0x14003043cb,0x140030015c-0x140030015d,0x1400700000-0x140070000f
irq 34 (no driver attached)
ebus0: <fdthree> addr
0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003
irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: mk48txx_attach: battery low
eeprom0: cannot attach time of day clock
device_attach: eeprom0 attach returned 6
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
pcm0: <Sun Audiocs> addr
0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x1400722000-0x1400722003
irq 35,36 on ebus0
pcm0: <CS4231A Codec Id. 10>
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on
pci1
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> PHY 1 on miibus0
nsphy0: OUI 0x1000e8, model 0x0000, rev. 1
nsphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: bpf attached
hme0: Ethernet address: 08:00:20:79:87:9a
machfb0: <ATI 3D Rage I/II> mem 0xe1000000-0xe1ffffff at device 2.0 on pci1
machfb0: 8 MB aperture at 0xd09f6000 swapped
machfb0: 2048 KB SGRAM 62.999 MHz, maximum RAMDAC clock 170 MHz, DSP
machfb0: resolution 1152x900 at 8 bpp
atapci0: <SiI (CMD) 646 WDMA2 controller> port
0xc00000-0xc00007,0xc00008-0xc0000b,0xc00010-0xc00017,0xc00018-0xc0001b,0xc00020-0xc0002f
at device 3.0 on pci1
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
siis0: <SiI3124 SATA controller> port 0x400-0x40f mem
0x2000-0x207f,0x8000-0xffff at device 1.0 on pci2
siisch0: <SIIS channel> at channel 0 on siis0
siisch1: <SIIS channel> at channel 1 on siis0
siisch2: <SIIS channel> at channel 2 on siis0
siisch3: <SIIS channel> at channel 3 on siis0
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=0x100>
syscons0: fb0, kbd0, terminal emulator: scteken (teken terminal)
procfs registered
Timecounter "tick" frequency 270000000 Hz quality 1000
Event timer "tick" frequency 270000000 Hz quality 1000
Timecounters tick every 1.000 msec
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: SATA connect time=100us status=00000123
siisch0: SIIS reset done: devices=00000001
(noperiph:siisch0:0:-1:ffffffff): rescan already queued
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 2048
lo0: bpf attached
ata2: reset tp1 mask=01 ostat0=50 ostat1=ff
ata2: stat0=0xd0 err=0x00 lsb=0x6b msb=0x8a
ata2: stat0=0xd0 err=0x00 lsb=0x6b msb=0x8a
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: reset tp1 mask=01 ostat0=00 ostat1=ff
ata3: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata3: reset tp2 stat0=00 stat1=00 devices=0x10000
siisch1: SIIS reset...
siisch1: SATA connect timeout time=10000us status=00000000
siisch1: SIIS reset done: phy reset found no device
siisch2: SIIS reset...
siisch2: SATA connect timeout time=10000us status=00000000
siisch2: SIIS reset done: phy reset found no device
siisch3: SIIS reset...
siisch3: SATA connect timeout time=10000us status=00000000
siisch3: SIIS reset done: phy reset found no device
GEOM: new disk cd0
pass0 at ata2 bus 0 scbus0 target 0 lun 0
pass0: cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <GoldStar CD-ROM CRD-8240B 1.24> Removable CD-ROM SCSI-0 device
cd0: Serial Number 1997/12/08
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [88382 x 2048 byte records]
<WDC WD2500BEVT-00A23T0 01.01A01> ATA-8 SATA 2.x device
pass0: Serial Number WD-WXQ0A99K2533
pass0: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
pass1 at ata3 bus 0 scbus1 target 0 lun 0
pass1: <GoldStar CD-ROM CRD-8240B 1.24> Removable CD-ROM SCSI-0 device
pass1: Serial Number 1997/12/08
pass1: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
pass2 at siisch0 bus 0 scbus2 target 0 lun 0
pass2: <WDC WD7502ABYS-01A6B0 03.00C05> ATA-8 SATA 2.x device
pass2: Serial Number WD-WMAU00028845
pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass2: Command Queueing enabled
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD2500BEVT-00A23T0 01.01A01> ATA-8 SATA 2.x device
ada0: Serial Number WD-WXQ0A99K2533
ada0: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
ada1 at siisch0 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD7502ABYS-01A6B0 03.00C05> ATA-8 SATA 2.x device
ada1: Serial Number WD-WMAU00028845
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad1
random: unblocking device.
GEOM: new disk ada0
GEOM: new disk ada1
GEOM: ada1: the secondary GPT table is corrupt or invalid.
GEOM: ada1: using the primary only -- recovery suggested.
GEOM: diskid/DISK-WD-WMAU00028845: the secondary GPT table is corrupt or
invalid.
GEOM: diskid/DISK-WD-WMAU00028845: using the primary only -- recovery
suggested.
Trying to mount root from ufs:/dev/ada0a [rw]...
warning: no time-of-day clock registered, system time will not be set
accurately
start_init: trying /sbin/init
crypto: <crypto core>
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
GEOM_ELI: Device ada0b.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAM9edeNFX8xPPM1q7m38_6WYQ-iBE3DqAYZsS_k2KAKbMAnRUw>