From owner-freebsd-smp  Wed Mar 19  6:26:54 2003
Delivered-To: freebsd-smp@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 202E637B404
	for <freebsd-smp@freebsd.org>; Wed, 19 Mar 2003 06:26:42 -0800 (PST)
Received: from anubis.slipstreaminteractive.com (anubis.slipstreaminteractive.com [213.52.163.122])
	by mx1.FreeBSD.org (Postfix) with ESMTP id B3EC243FDF
	for <freebsd-smp@freebsd.org>; Wed, 19 Mar 2003 06:26:39 -0800 (PST)
	(envelope-from andrewt@slipstreaminteractive.com)
Received: from Elrond (biliskner.demon.co.uk [193.237.132.215])
	by anubis.slipstreaminteractive.com (Postfix) with ESMTP id 13CC846F
	for <freebsd-smp@freebsd.org>; Wed, 19 Mar 2003 14:27:18 +0000 (GMT)
From: "Andrew Tulloch" <andrewt@slipstreaminteractive.com>
To: <freebsd-smp@freebsd.org>
Subject: Compaq/HP DL380G3 SMP and FreeBSD-STABLE
Date: Wed, 19 Mar 2003 14:26:22 -0000
Message-ID: <001301c2ee23$847dd3e0$0100a8c0@Elrond>
MIME-Version: 1.0
Content-Type: multipart/mixed;
	boundary="----=_NextPart_000_0014_01C2EE23.847DD3E0"
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook, Build 10.0.4510
Importance: Normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Sender: owner-freebsd-smp@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-smp.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-smp>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-smp>
X-Loop: FreeBSD.org

This is a multi-part message in MIME format.

------=_NextPart_000_0014_01C2EE23.847DD3E0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

I've got a new compaq DL380G3 with dual 2.8Ghz xeons and 2GB of ram
installed from a FreeBSD 4.8-RC1 cd and cvsup'd and make world to =
-stable,
which all worked fine. However as soon as I SMP support to the kernel =
and
reboot the machine dies. It boots and starts services, but after a short
time of doing anything it dies, I tried doing a make buildkernel and it
lasted about a minute before it couldn't seem to access the disk, =
eventually
the machine seems to lock altogether. The disk in question is a RAID5 =
array
of 3x36.4GB SCSI disks connected to a 5302-128 board.

I've searched and found only one reference to FreeBSD and SMP on these
machines and it mentioned having the OS Selection in the bios set to =
Linux,
which I did have.

The only kernel messages I've seen at the time were:

Mar 17 14:25:53 gandalf /kernel: bge0: watchdog timeout -- resetting

Which is the interface currently in use. It almost seems like the =
machine is
just losing interrupts.

Everything seems to work fine with a UP kernel, completed buildworlds
without any issue.

Has anyone got one of these and has it working?

Thanks in advance,
Andrew

Please CC me in any responses as I am currently not subscribed.

Dmesgs attached.

Andrew Tulloch
Systems Administrator
Slipstream Interactive Ltd
Email : andrewt@slipstreaminteractive.com
http://www.itv-f1.com

------=_NextPart_000_0014_01C2EE23.847DD3E0
Content-Type: text/plain;
	name="dmesg-up.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="dmesg-up.txt"

Jan 28 02:24:29 gandalf /kernel: Copyright (c) 1992-2003 The FreeBSD =
Project.
Jan 28 02:24:29 gandalf /kernel: Copyright (c) 1979, 1980, 1983, 1986, =
1988, 1989, 1991, 1992, 1993, 1994
Jan 28 02:24:29 gandalf /kernel: The Regents of the University of =
California. All rights reserved.
Jan 28 02:24:29 gandalf /kernel: FreeBSD 4.8-RC1 #0: Mon Mar  3 01:01:33 =
GMT 2003
Jan 28 02:24:29 gandalf /kernel: =
root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Jan 28 02:24:29 gandalf /kernel: Timecounter "i8254"  frequency 1193182 =
Hz
Jan 28 02:24:29 gandalf /kernel: CPU: Intel(R) Xeon(TM) CPU 2.80GHz =
(2785.02-MHz 686-class CPU)
Jan 28 02:24:29 gandalf /kernel: Origin =3D "GenuineIntel"  Id =3D 0xf27 =
 Stepping =3D 7
Jan 28 02:24:29 gandalf /kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Jan 28 02:24:29 gandalf /kernel: Hyperthreading: 2 logical CPUs
Jan 28 02:24:29 gandalf /kernel: real memory  =3D 2147459072 (2097128K =
bytes)
Jan 28 02:24:29 gandalf /kernel: avail memory =3D 2086457344 (2037556K =
bytes)
Jan 28 02:24:29 gandalf /kernel: Preloaded elf kernel "kernel" at =
0xc051c000.
Jan 28 02:24:29 gandalf /kernel: Pentium Pro MTRR support enabled
Jan 28 02:24:29 gandalf /kernel: md0: Malloc disk
Jan 28 02:24:29 gandalf /kernel: npx0: <math processor> on motherboard
Jan 28 02:24:29 gandalf /kernel: npx0: INT 16 interface
Jan 28 02:24:29 gandalf /kernel: pcib0: <Host to PCI bridge> on =
motherboard
Jan 28 02:24:29 gandalf /kernel: pci0: <PCI bus> on pcib0
Jan 28 02:24:29 gandalf /kernel: pci0: <ATI Mach64-GR graphics =
accelerator> at 3.0
Jan 28 02:24:29 gandalf /kernel: pci0: <unknown card> (vendor=3D0x0e11, =
dev=3D0xb203) at 4.0 irq 3
Jan 28 02:24:29 gandalf /kernel: pci0: <unknown card> (vendor=3D0x0e11, =
dev=3D0xb204) at 4.2 irq 5
Jan 28 02:24:29 gandalf /kernel: isab0: <PCI to ISA bridge =
(vendor=3D1166 device=3D0201)> at device 15.0 on pci0
Jan 28 02:24:29 gandalf /kernel: isa0: <ISA bus> on isab0
Jan 28 02:24:29 gandalf /kernel: atapci0: <ServerWorks CSB5 ATA100 =
controller> port =
0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device =
15.1 on pci0
Jan 28 02:24:29 gandalf /kernel: ata0: at 0x1f0 irq 14 on atapci0
Jan 28 02:24:29 gandalf /kernel: ata1: at 0x170 irq 15 on atapci0
Jan 28 02:24:29 gandalf /kernel: ohci0: <OHCI (generic) USB controller> =
mem 0xf5ef0000-0xf5ef0fff irq 7 at device 15.2 on pci0
Jan 28 02:24:29 gandalf /kernel: usb0: OHCI version 1.0, legacy support
Jan 28 02:24:29 gandalf /kernel: usb0: SMM does not respond, resetting
Jan 28 02:24:29 gandalf /kernel: usb0: <OHCI (generic) USB controller> =
on ohci0
Jan 28 02:24:29 gandalf /kernel: usb0: USB revision 1.0
Jan 28 02:24:29 gandalf /kernel: uhub0: (0x1166) OHCI root hub, class =
9/0, rev 1.00/1.00, addr 1
Jan 28 02:24:29 gandalf /kernel: uhub0: 4 ports with 4 removable, self =
powered
Jan 28 02:24:29 gandalf /kernel: pcib1: <Host to PCI bridge> on =
motherboard
Jan 28 02:24:29 gandalf /kernel: pci1: <PCI bus> on pcib1
Jan 28 02:24:29 gandalf /kernel: ciss0: <Compaq Smart Array 5i> port =
0x3000-0x30ff mem 0xf7af0000-0xf7af3fff,0xf7bc0000-0xf7bfffff irq 10 at =
device 3.0 on pci1
Jan 28 02:24:29 gandalf /kernel: ciss0: using 256 of 1024 available =
commands
Jan 28 02:24:29 gandalf /kernel: ciss0:   0 logical drives configured
Jan 28 02:24:29 gandalf /kernel: ciss0:   firmware 1.92
Jan 28 02:24:29 gandalf /kernel: ciss0:   2 SCSI channels
Jan 28 02:24:29 gandalf /kernel: ciss0:   signature 'CISS'
Jan 28 02:24:29 gandalf /kernel: ciss0:   valence 1
Jan 28 02:24:29 gandalf /kernel: ciss0:   supported I/O methods =
0xe<simple,performant,MEMQ>
Jan 28 02:24:29 gandalf /kernel: ciss0:   active I/O method 0x3<simple>
Jan 28 02:24:29 gandalf /kernel: ciss0:   4G page base 0x00000000
Jan 28 02:24:29 gandalf /kernel: ciss0:   interrupt coalesce delay =
1000us
Jan 28 02:24:29 gandalf /kernel: ciss0:   interrupt coalesce count 16
Jan 28 02:24:29 gandalf /kernel: ciss0:   max outstanding commands 1024
Jan 28 02:24:29 gandalf /kernel: ciss0:   bus types 0x2<ultra3>
Jan 28 02:24:29 gandalf /kernel: ciss0:   server name ''
Jan 28 02:24:29 gandalf /kernel: ciss0:   heartbeat 0x30000032
Jan 28 02:24:29 gandalf /kernel: ciss0: 0 logical drive
Jan 28 02:24:29 gandalf /kernel: pcib2: <Host to PCI bridge> on =
motherboard
Jan 28 02:24:29 gandalf /kernel: pci2: <PCI bus> on pcib2
Jan 28 02:24:29 gandalf /kernel: bge0: <Broadcom BCM5703X Gigabit =
Ethernet, ASIC rev. 0x1002> mem 0xf7cf0000-0xf7cfffff irq 11 at device =
1.0 on pci2
Jan 28 02:24:29 gandalf /kernel: bge0: Ethernet address: =
00:0b:cd:0e:f8:da
Jan 28 02:24:29 gandalf /kernel: miibus0: <MII bus> on bge0
Jan 28 02:24:29 gandalf /kernel: brgphy0: <BCM5703 10/100/1000baseTX =
PHY> on miibus0
Jan 28 02:24:29 gandalf /kernel: brgphy0:  10baseT, 10baseT-FDX, =
100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Jan 28 02:24:29 gandalf /kernel: bge1: <Broadcom BCM5703X Gigabit =
Ethernet, ASIC rev. 0x1002> mem 0xf7ce0000-0xf7ceffff irq 15 at device =
2.0 on pci2
Jan 28 02:24:29 gandalf /kernel: bge1: Ethernet address: =
00:0b:cd:0e:f6:9a
Jan 28 02:24:29 gandalf /kernel: miibus1: <MII bus> on bge1
Jan 28 02:24:29 gandalf /kernel: brgphy1: <BCM5703 10/100/1000baseTX =
PHY> on miibus1
Jan 28 02:24:29 gandalf /kernel: brgphy1:  10baseT, 10baseT-FDX, =
100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Jan 28 02:24:29 gandalf /kernel: pcib3: <Host to PCI bridge> on =
motherboard
Jan 28 02:24:29 gandalf /kernel: pci3: <PCI bus> on pcib3
Jan 28 02:24:29 gandalf /kernel: pcib4: <ServerWorks host to PCI =
bridge(unknown chipset)> on motherboard
Jan 28 02:24:29 gandalf /kernel: pci4: <PCI bus> on pcib4
Jan 28 02:24:29 gandalf /kernel: pcib6: <ServerWorks host to PCI =
bridge(unknown chipset)> on motherboard
Jan 28 02:24:29 gandalf /kernel: pci6: <PCI bus> on pcib6
Jan 28 02:24:29 gandalf /kernel: ciss1: <Compaq Smart Array 5300> port =
0x4000-0x40ff mem 0xf7e00000-0xf7efffff,0xf7fc0000-0xf7ffffff irq 10 at =
device 2.0 on pci6
Jan 28 02:24:29 gandalf /kernel: ciss1: using 256 of 1024 available =
commands
Jan 28 02:24:29 gandalf /kernel: ciss1:   1 logical drive configured
Jan 28 02:24:29 gandalf /kernel: ciss1:   firmware 2.86
Jan 28 02:24:29 gandalf /kernel: ciss1:   2 SCSI channels
Jan 28 02:24:29 gandalf /kernel: ciss1:   signature 'CISS'
Jan 28 02:24:29 gandalf /kernel: ciss1:   valence 1
Jan 28 02:24:29 gandalf /kernel: ciss1:   supported I/O methods =
0xe<simple,performant,MEMQ>
Jan 28 02:24:29 gandalf /kernel: ciss1:   active I/O method 0x3<simple>
Jan 28 02:24:29 gandalf /kernel: ciss1:   4G page base 0x00000000
Jan 28 02:24:29 gandalf /kernel: ciss1:   interrupt coalesce delay =
1000us
Jan 28 02:24:29 gandalf /kernel: ciss1:   interrupt coalesce count 0
Jan 28 02:24:29 gandalf /kernel: ciss1:   max outstanding commands 1024
Jan 28 02:24:29 gandalf /kernel: ciss1:   bus types 0x2<ultra3>
Jan 28 02:24:29 gandalf /kernel: ciss1:   server name ''
Jan 28 02:24:29 gandalf /kernel: ciss1:   heartbeat 0xf0000025
Jan 28 02:24:29 gandalf /kernel: ciss1: 1 logical drive
Jan 28 02:24:29 gandalf /kernel: ciss1: logical drive 1: RAID 5, 69120MB =
online
Jan 28 02:24:29 gandalf /kernel: pci6: <unknown card> (vendor=3D0x0e11, =
dev=3D0xa0f7) at 30.0 irq 15
Jan 28 02:24:29 gandalf /kernel: pcib5: <ServerWorks host to PCI =
bridge(unknown chipset)> on motherboard
Jan 28 02:24:29 gandalf /kernel: pci5: <PCI bus> on pcib5
Jan 28 02:24:29 gandalf /kernel: pcib7: <ServerWorks host to PCI =
bridge(unknown chipset)> on motherboard
Jan 28 02:24:29 gandalf /kernel: pci7: <PCI bus> on pcib7
Jan 28 02:24:29 gandalf /kernel: eisa0: <EISA bus> on motherboard
Jan 28 02:24:29 gandalf /kernel: mainboard0: <CPQ0727 (System Board)> on =
eisa0 slot 0
Jan 28 02:24:29 gandalf /kernel: orm0: <Option ROMs> at iomem =
0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd17ff,0xee000-0=
xeffff on isa0
Jan 28 02:24:29 gandalf /kernel: fdc0: <NEC 72065B or clone> at port =
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Jan 28 02:24:29 gandalf /kernel: fdc0: FIFO enabled, 8 bytes threshold
Jan 28 02:24:29 gandalf /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive =
0
Jan 28 02:24:29 gandalf /kernel: atkbdc0: <Keyboard controller (i8042)> =
at port 0x60,0x64 on isa0
Jan 28 02:24:29 gandalf /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 =
on atkbdc0
Jan 28 02:24:29 gandalf /kernel: kbd0 at atkbd0
Jan 28 02:24:29 gandalf /kernel: vga0: <Generic ISA VGA> at port =
0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jan 28 02:24:29 gandalf /kernel: sc0: <System console> at flags 0x100 on =
isa0
Jan 28 02:24:29 gandalf /kernel: sc0: VGA <16 virtual consoles, =
flags=3D0x300>
Jan 28 02:24:29 gandalf /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags =
0x10 on isa0
Jan 28 02:24:29 gandalf /kernel: sio0: type 16550A
Jan 28 02:24:29 gandalf /kernel: sio1: configured irq 3 not in bitmap of =
probed irqs 0
Jan 28 02:24:29 gandalf /kernel: ppc0: parallel port not found.
Jan 28 02:24:29 gandalf /kernel: ata0-slave: ATA identify retries =
exceeded
Jan 28 02:24:29 gandalf /kernel: acd0: CDROM <COMPAQ CD-ROM SN-124> at =
ata0-master PIO4
Jan 28 02:24:29 gandalf /kernel: Mounting root from ufs:/dev/da0s1a
Jan 28 02:24:29 gandalf /kernel: da0 at ciss1 bus 0 target 0 lun 0
Jan 28 02:24:29 gandalf /kernel: da0: <COMPAQ RAID 5  VOLUME OK> Fixed =
Direct Access SCSI-0 device=20
Jan 28 02:24:29 gandalf /kernel: da0: 135.168MB/s transfers
Jan 28 02:24:29 gandalf /kernel: da0: 69463MB (142261440 512 byte =
sectors: 255H 32S/T 17434C)
------=_NextPart_000_0014_01C2EE23.847DD3E0
Content-Type: text/plain;
	name="dmesg-smp.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="dmesg-smp.txt"

Mar 17 14:23:26 gandalf /kernel: Copyright (c) 1992-2003 The FreeBSD =
Project.
Mar 17 14:23:26 gandalf /kernel: Copyright (c) 1979, 1980, 1983, 1986, =
1988, 1989, 1991, 1992, 1993, 1994
Mar 17 14:23:26 gandalf /kernel: The Regents of the University of =
California. All rights reserved.
Mar 17 14:23:26 gandalf /kernel: FreeBSD 4.8-RC #0: Mon Mar 17 12:34:06 =
GMT 2003
Mar 17 14:23:26 gandalf /kernel: =
xxxxxxx@gandalf.xxx-xx.com:/usr/obj/usr/src/sys/GANDALF
Mar 17 14:23:26 gandalf /kernel: Timecounter "i8254"  frequency 1193182 =
Hz
Mar 17 14:23:26 gandalf /kernel: CPU: Intel(R) Xeon(TM) CPU 2.80GHz =
(2785.19-MHz 686-class CPU)
Mar 17 14:23:26 gandalf /kernel: Origin =3D "GenuineIntel"  Id =3D 0xf27 =
 Stepping =3D 7
Mar 17 14:23:26 gandalf /kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Mar 17 14:23:26 gandalf /kernel: Hyperthreading: 2 logical CPUs
Mar 17 14:23:26 gandalf /kernel: real memory  =3D 2147459072 (2097128K =
bytes)
Mar 17 14:23:26 gandalf /kernel: avail memory =3D 2088042496 (2039104K =
bytes)
Mar 17 14:23:26 gandalf /kernel: Programming 16 pins in IOAPIC #0
Mar 17 14:23:26 gandalf /kernel: IOAPIC #0 intpin 2 -> irq 0
Mar 17 14:23:26 gandalf /kernel: Programming 16 pins in IOAPIC #1
Mar 17 14:23:26 gandalf /kernel: Programming 16 pins in IOAPIC #2
Mar 17 14:23:26 gandalf /kernel: Programming 16 pins in IOAPIC #3
Mar 17 14:23:26 gandalf /kernel: FreeBSD/SMP: Multiprocessor motherboard
Mar 17 14:23:26 gandalf /kernel: cpu0 (BSP): apic id:  0, version: =
0x00050014, at 0xfee00000
Mar 17 14:23:26 gandalf /kernel: cpu1 (AP):  apic id:  6, version: =
0x00050014, at 0xfee00000
Mar 17 14:23:26 gandalf /kernel: io0 (APIC): apic id:  2, version: =
0x000f0011, at 0xfec00000
Mar 17 14:23:26 gandalf /kernel: io1 (APIC): apic id:  3, version: =
0x000f0011, at 0xfec01000
Mar 17 14:23:26 gandalf /kernel: io2 (APIC): apic id:  4, version: =
0x000f0011, at 0xfec02000
Mar 17 14:23:26 gandalf /kernel: io3 (APIC): apic id:  5, version: =
0x000f0011, at 0xfec03000
Mar 17 14:23:26 gandalf /kernel: Preloaded elf kernel "kernel" at =
0xc0397000.
Mar 17 14:23:26 gandalf /kernel: Pentium Pro MTRR support enabled
Mar 17 14:23:26 gandalf /kernel: md0: Malloc disk
Mar 17 14:23:26 gandalf /kernel: npx0: <math processor> on motherboard
Mar 17 14:23:26 gandalf /kernel: npx0: INT 16 interface
Mar 17 14:23:26 gandalf /kernel: pcib0: <Host to PCI bridge> on =
motherboard
Mar 17 14:23:26 gandalf /kernel: pci0: <PCI bus> on pcib0
Mar 17 14:23:26 gandalf /kernel: pci0: <ATI Mach64-GR graphics =
accelerator> at 3.0
Mar 17 14:23:26 gandalf /kernel: pci0: <unknown card> (vendor=3D0x0e11, =
dev=3D0xb203) at 4.0 irq 3
Mar 17 14:23:26 gandalf /kernel: pci0: <unknown card> (vendor=3D0x0e11, =
dev=3D0xb204) at 4.2 irq 5
Mar 17 14:23:26 gandalf /kernel: isab0: <PCI to ISA bridge =
(vendor=3D1166 device=3D0201)> at device 15.0 on pci0
Mar 17 14:23:26 gandalf /kernel: isa0: <ISA bus> on isab0
Mar 17 14:23:26 gandalf /kernel: atapci0: <ServerWorks CSB5 ATA100 =
controller> port =
0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device =
15.1 on pci0
Mar 17 14:23:26 gandalf /kernel: ata0: at 0x1f0 irq 14 on atapci0
Mar 17 14:23:26 gandalf /kernel: ata1: at 0x170 irq 15 on atapci0
Mar 17 14:23:26 gandalf /kernel: ohci0: <OHCI (generic) USB controller> =
mem 0xf5ef0000-0xf5ef0fff irq 7 at device 15.2 on pci0
Mar 17 14:23:26 gandalf /kernel: usb0: OHCI version 1.0, legacy support
Mar 17 14:23:26 gandalf /kernel: usb0: SMM does not respond, resetting
Mar 17 14:23:26 gandalf /kernel: usb0: <OHCI (generic) USB controller> =
on ohci0
Mar 17 14:23:26 gandalf /kernel: usb0: USB revision 1.0
Mar 17 14:23:26 gandalf /kernel: uhub0: (0x1166) OHCI root hub, class =
9/0, rev 1.00/1.00, addr 1
Mar 17 14:23:26 gandalf /kernel: uhub0: 4 ports with 4 removable, self =
powered
Mar 17 14:23:26 gandalf /kernel: pcib1: <Host to PCI bridge> on =
motherboard
Mar 17 14:23:26 gandalf /kernel: pci1: <PCI bus> on pcib1
Mar 17 14:23:26 gandalf /kernel: ciss0: <Compaq Smart Array 5i> port =
0x3000-0x30ff mem 0xf7af0000-0xf7af3fff,0xf7bc0000-0xf7bfffff irq 10 at =
device 3.0 on pci1
Mar 17 14:23:26 gandalf /kernel: ciss0: using 256 of 1024 available =
commands
Mar 17 14:23:26 gandalf /kernel: ciss0:   0 logical drives configured
Mar 17 14:23:26 gandalf /kernel: ciss0:   firmware 1.92
Mar 17 14:23:26 gandalf /kernel: ciss0:   2 SCSI channels
Mar 17 14:23:26 gandalf /kernel: ciss0:   signature 'CISS'
Mar 17 14:23:26 gandalf /kernel: ciss0:   valence 1
Mar 17 14:23:26 gandalf /kernel: ciss0:   supported I/O methods =
0xe<simple,performant,MEMQ>
Mar 17 14:23:26 gandalf /kernel: ciss0:   active I/O method 0x3<simple>
Mar 17 14:23:26 gandalf /kernel: ciss0:   4G page base 0x00000000
Mar 17 14:23:26 gandalf /kernel: ciss0:   interrupt coalesce delay =
1000us
Mar 17 14:23:26 gandalf /kernel: ciss0:   interrupt coalesce count 16
Mar 17 14:23:26 gandalf /kernel: ciss0:   max outstanding commands 1024
Mar 17 14:23:26 gandalf /kernel: ciss0:   bus types 0x2<ultra3>
Mar 17 14:23:26 gandalf /kernel: ciss0:   server name ''
Mar 17 14:23:26 gandalf /kernel: ciss0:   heartbeat 0x3000003e
Mar 17 14:23:26 gandalf /kernel: ciss0: 0 logical drive
Mar 17 14:23:26 gandalf /kernel: pcib2: <Host to PCI bridge> on =
motherboard
Mar 17 14:23:26 gandalf /kernel: pci2: <PCI bus> on pcib2
Mar 17 14:23:26 gandalf /kernel: bge0: <Broadcom BCM5703X Gigabit =
Ethernet, ASIC rev. 0x1002> mem 0xf7cf0000-0xf7cfffff irq 11 at device =
1.0 on pci2
Mar 17 14:23:26 gandalf /kernel: bge0: Ethernet address: =
00:0b:cd:0e:f8:da
Mar 17 14:23:26 gandalf /kernel: miibus0: <MII bus> on bge0
Mar 17 14:23:26 gandalf /kernel: brgphy0: <BCM5703 10/100/1000baseTX =
PHY> on miibus0
Mar 17 14:23:26 gandalf /kernel: brgphy0:  10baseT, 10baseT-FDX, =
100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Mar 17 14:23:26 gandalf /kernel: bge1: <Broadcom BCM5703X Gigabit =
Ethernet, ASIC rev. 0x1002> mem 0xf7ce0000-0xf7ceffff irq 15 at device =
2.0 on pci2
Mar 17 14:23:26 gandalf /kernel: bge1: Ethernet address: =
00:0b:cd:0e:f6:9a
Mar 17 14:23:26 gandalf /kernel: miibus1: <MII bus> on bge1
Mar 17 14:23:26 gandalf /kernel: brgphy1: <BCM5703 10/100/1000baseTX =
PHY> on miibus1
Mar 17 14:23:26 gandalf /kernel: brgphy1:  10baseT, 10baseT-FDX, =
100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Mar 17 14:23:26 gandalf /kernel: pcib3: <Host to PCI bridge> on =
motherboard
Mar 17 14:23:26 gandalf /kernel: pci3: <PCI bus> on pcib3
Mar 17 14:23:26 gandalf /kernel: pcib4: <ServerWorks host to PCI =
bridge(unknown chipset)> on motherboard
Mar 17 14:23:26 gandalf /kernel: pci4: <PCI bus> on pcib4
Mar 17 14:23:26 gandalf /kernel: pcib6: <ServerWorks host to PCI =
bridge(unknown chipset)> on motherboard
Mar 17 14:23:26 gandalf /kernel: pci6: <PCI bus> on pcib6
Mar 17 14:23:26 gandalf /kernel: ciss1: <Compaq Smart Array 5300> port =
0x4000-0x40ff mem 0xf7e00000-0xf7efffff,0xf7fc0000-0xf7ffffff irq 10 at =
device 2.0 on pci6
Mar 17 14:23:26 gandalf /kernel: ciss1: using 256 of 1024 available =
commands
Mar 17 14:23:26 gandalf /kernel: ciss1:   1 logical drive configured
Mar 17 14:23:26 gandalf /kernel: ciss1:   firmware 2.86
Mar 17 14:23:26 gandalf /kernel: ciss1:   2 SCSI channels
Mar 17 14:23:26 gandalf /kernel: ciss1:   signature 'CISS'
Mar 17 14:23:26 gandalf /kernel: ciss1:   valence 1
Mar 17 14:23:26 gandalf /kernel: ciss1:   supported I/O methods =
0xe<simple,performant,MEMQ>
Mar 17 14:23:26 gandalf /kernel: ciss1:   active I/O method 0x3<simple>
Mar 17 14:23:26 gandalf /kernel: ciss1:   4G page base 0x00000000
Mar 17 14:23:26 gandalf /kernel: ciss1:   interrupt coalesce delay =
1000us
Mar 17 14:23:26 gandalf /kernel: ciss1:   interrupt coalesce count 0
Mar 17 14:23:26 gandalf /kernel: ciss1:   max outstanding commands 1024
Mar 17 14:23:26 gandalf /kernel: ciss1:   bus types 0x2<ultra3>
Mar 17 14:23:26 gandalf /kernel: ciss1:   server name ''
Mar 17 14:23:26 gandalf /kernel: ciss1:   heartbeat 0xf0000031
Mar 17 14:23:26 gandalf /kernel: ciss1: 1 logical drive
Mar 17 14:23:26 gandalf /kernel: ciss1: logical drive 1: RAID 5, 69120MB =
online
Mar 17 14:23:26 gandalf /kernel: pci6: <unknown card> (vendor=3D0x0e11, =
dev=3D0xa0f7) at 30.0 irq 15
Mar 17 14:23:26 gandalf /kernel: pcib5: <ServerWorks host to PCI =
bridge(unknown chipset)> on motherboard
Mar 17 14:23:26 gandalf /kernel: pci5: <PCI bus> on pcib5
Mar 17 14:23:26 gandalf /kernel: pcib7: <ServerWorks host to PCI =
bridge(unknown chipset)> on motherboard
Mar 17 14:23:26 gandalf /kernel: pci7: <PCI bus> on pcib7
Mar 17 14:23:26 gandalf /kernel: eisa0: <EISA bus> on motherboard
Mar 17 14:23:26 gandalf /kernel: mainboard0: <CPQ0727 (System Board)> on =
eisa0 slot 0
Mar 17 14:23:26 gandalf /kernel: orm0: <Option ROMs> at iomem =
0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd17ff,0xee000-0=
xeffff on isa0
Mar 17 14:23:26 gandalf /kernel: fdc0: <NEC 72065B or clone> at port =
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Mar 17 14:23:26 gandalf /kernel: fdc0: FIFO enabled, 8 bytes threshold
Mar 17 14:23:26 gandalf /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive =
0
Mar 17 14:23:26 gandalf /kernel: atkbdc0: <Keyboard controller (i8042)> =
at port 0x60,0x64 on isa0
Mar 17 14:23:26 gandalf /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 =
on atkbdc0
Mar 17 14:23:26 gandalf /kernel: kbd0 at atkbd0
Mar 17 14:23:26 gandalf /kernel: vga0: <Generic ISA VGA> at port =
0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Mar 17 14:23:26 gandalf /kernel: sc0: <System console> at flags 0x100 on =
isa0
Mar 17 14:23:26 gandalf /kernel: sc0: VGA <16 virtual consoles, =
flags=3D0x300>
Mar 17 14:23:26 gandalf /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags =
0x10 on isa0
Mar 17 14:23:26 gandalf /kernel: sio0: type 16550A
Mar 17 14:23:26 gandalf /kernel: sio1: configured irq 3 not in bitmap of =
probed irqs 0
Mar 17 14:23:26 gandalf /kernel: ppc0: parallel port not found.
Mar 17 14:23:26 gandalf /kernel: APIC_IO: Testing 8254 interrupt =
delivery
Mar 17 14:23:26 gandalf /kernel: APIC_IO: routing 8254 via IOAPIC #0 =
intpin 2
Mar 17 14:23:26 gandalf /kernel: ata0-slave: ATA identify retries =
exceeded
Mar 17 14:23:26 gandalf /kernel: SMP: AP CPU #1 Launched!
Mar 17 14:23:26 gandalf /kernel: acd0: CDROM <COMPAQ CD-ROM SN-124> at =
ata0-master PIO4
Mar 17 14:23:26 gandalf /kernel: Mounting root from ufs:/dev/da0s1a
Mar 17 14:23:26 gandalf /kernel: da0 at ciss1 bus 0 target 0 lun 0
Mar 17 14:23:26 gandalf /kernel: da0: <COMPAQ RAID 5  VOLUME OK> Fixed =
Direct Access SCSI-0 device=20
Mar 17 14:23:26 gandalf /kernel: da0: 135.168MB/s transfers
Mar 17 14:23:26 gandalf /kernel: da0: 69463MB (142261440 512 byte =
sectors: 255H 32S/T 17434C)
------=_NextPart_000_0014_01C2EE23.847DD3E0--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message