Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 14 May 2012 15:20:53 +0200 (CEST)
From:      Wojciech Puchar <wojtek@wojtek.tensor.gdynia.pl>
To:        Julien Cigar <jcigar@ulb.ac.be>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: what software can support that UPS ?
Message-ID:  <alpine.BSF.2.00.1205141517340.1921@wojtek.tensor.gdynia.pl>
In-Reply-To: <4FB0F781.8070301@ulb.ac.be>
References:  <alpine.BSF.2.00.1205141403130.1509@wojtek.tensor.gdynia.pl> <4FB0F781.8070301@ulb.ac.be>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
> /usr/ports/sysutils/apcupsd ?

? - so what to give as device? /dev/ugen1.3?
set

UPSCABLE usb
UPSTYPE usb
not set DEVICE as specified in comments for USB devices.

can't find UPS. tried setting DEVICE to /dev/ugen1.3 - no avail.



tried /usr/ports/sysutils/nut

selected "EVER" driver, and set up /dev/ugen1.3 as port - driver fails.


from what i found in linux groups it should work as USB HID device. but 
uhid doesn't attach.


>
> On 05/14/2012 14:06, Wojciech Puchar wrote:
>> seems like it is very badly made USB interface, all class data is empty,
>> 
>> 
>> 
>> ugen1.3: <ECO Pro Series UPS EVER> at usbus1, cfg=0 md=HOST spd=FULL 
>> (12Mbps) pwr=ON
>>
>>   bLength = 0x0012
>>   bDescriptorType = 0x0001
>>   bcdUSB = 0x0101
>>   bDeviceClass = 0x0000
>>   bDeviceSubClass = 0x0000
>>   bDeviceProtocol = 0x0000
>>   bMaxPacketSize0 = 0x0008
>>   idVendor = 0x0403
>>   idProduct = 0xe520
>>   bcdDevice = 0x0400
>>   iManufacturer = 0x0001 <EVER>
>>   iProduct = 0x0002 <ECO Pro Series UPS>
>>   iSerialNumber = 0x0003 <ECOPRO00>
>>   bNumConfigurations = 0x0001
>> 
>> 
>> FreeBSD gives only ugen interface.
>> 
>> 
>> what (if any) software support that?
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to 
>> "freebsd-questions-unsubscribe@freebsd.org"
>
>
> -- 
> No trees were killed in the creation of this message.
> However, many electrons were terribly inconvenienced.
>
>



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1205141517340.1921>