From owner-freebsd-multimedia Wed May 15 09:25:52 1996 Return-Path: owner-multimedia Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id JAA29363 for multimedia-outgoing; Wed, 15 May 1996 09:25:52 -0700 (PDT) Received: from who.cdrom.com (who.cdrom.com [204.216.27.3]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id JAA29358 for ; Wed, 15 May 1996 09:25:50 -0700 (PDT) Received: from cosmos.kaist.ac.kr (cosmos.kaist.ac.kr [143.248.172.41]) by who.cdrom.com (8.6.12/8.6.11) with ESMTP id JAA05130 for ; Wed, 15 May 1996 09:25:42 -0700 Received: (from whchoi@localhost) by cosmos.kaist.ac.kr (8.6.12h2/8.6.12) id BAA04876; Thu, 16 May 1996 01:15:22 -0900 From: Woohyong Choi Message-Id: <199605161015.BAA04876@cosmos.kaist.ac.kr> Subject: problem installing beta release for the gus pnp pro To: freebsd-multimedia@freebsd.org Date: Thu, 16 May 1996 01:15:21 -0900 (GMT) Cc: hasty@rah.star-gate.com, whchoi@cosmos.kaist.ac.kr (Woohyong Choi), yichoi@cosmos.kaist.ac.kr (Youngil Choi) X-Mailer: ELM [version 2.4 PL21-h4] MIME-Version: 1.0 Content-Type: text/plain; charset=iso-2022-kr Content-Transfer-Encoding: 7bit Sender: owner-multimedia@freebsd.org X-Loop: FreeBSD.org Precedence: bulk hi again, freebsd-multimedia hackers! i've retrieved guspnp.tar.gz from your host and trying to install it onto 2.2-960501-SNAP snapshot distribution. I've followed instructions given in the README.GUSPNP, to unpack the release, cd /sys/i386/isa mv sound sound.old tar -xzf guspnp.tar.gz then i've ran configure as follows, bash# ./configure Configuring the sound support Old configuration exists in /etc/soundconf. Use it (y/n) ? n /* Generated by configure. Don't edit!!!! */ /* Making changes to this file is not as simple as it may look. */ ProAudioSpectrum 16 support (n/y) ? n SoundBlaster support (n/y) ? n Generic OPL2/OPL3 FM synthesizer support (n/y) ? n Gravis Ultrasound support (n/y) ? y MPU-401 support (NOT for SB16) (n/y) ? n 6850 UART Midi support (n/y) ? n PSS (ECHO-ADI2111) support (n/y) ? n 16 bit sampling option of GUS (_NOT_ GUS MAX) (n/y) ? n GUS MAX support (n/y) ? y Microsoft Sound System support (n/y) ? n Ensoniq Soundscape support (n/y) ? n MediaTriX AudioTriX Pro support (n/y) ? n Support for MAD16 and/or Mozart based cards (n/y) ? n Support for Crystal CS4232 based (PnP) cards (n/y) ? n Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers (n/y) ? n /dev/dsp and /dev/audio supports (usually required) (y/n) ? y MIDI interface support (y/n) ? n #define KERNEL_SOUNDCARD #undef CONFIG_PAS #undef CONFIG_SB #undef CONFIG_ADLIB #define CONFIG_GUS #undef CONFIG_MPU401 #undef CONFIG_UART6850 #undef CONFIG_PSS #undef CONFIG_GUS16 #define CONFIG_GUSMAX #undef CONFIG_MSS #undef CONFIG_SSCAPE #undef CONFIG_TRIX #undef CONFIG_MAD16 #undef CONFIG_CS4232 #undef CONFIG_MAUI #undef CONFIG_PNP #undef CONFIG_SBPRO #undef CONFIG_SB16 #undef CONFIG_AEDSP16 #define CONFIG_AUDIO #undef CONFIG_MIDI #undef CONFIG_YM3812 #define CONFIG_SEQUENCER #undef CONFIG_MPU_EMU #define CONFIG_AD1848 Select the DMA buffer size (4096, 16384, 32768 or 65536 bytes) 65536 is recommended value for this configuration. Enter the value: 65536 The DMA buffer size set to 65536 #define DSP_BUFFSIZE 65536 #define SELECTED_SOUND_OPTIONS 0x01080108 The sound driver is now configured. Save copy of this configuration to /etc/soundconf (y/n)y bash# and then copied /etc/soundconf into /sys/i386/isa/sound/local.h then I get the following error during the kernel make process. cc -c -O -W -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Winline -nostdinc -I. -I../.. -I../../sys -I../../../include -DI386_CPU -DI486_CPU -DI586_CPU -DI686_CPU -DAPM_BROKEN_STATCLOCK -DATAPI_STATIC -DATAPI -DMETEOR_ALLOC_PAGES=151 -DFAILSAFE -DCOMPAT_43 -DCD9660 -DMSDOSFS -DGRF_NTSC -DMULTICAST -DNFS -DFFS -DINET -DKERNEL ../../i386/isa/sound/dev_table.c In file included from ../../i386/isa/sound/os.h:9, from ../../i386/isa/sound/sound_config.h:40, from ../../i386/isa/sound/dev_table.c:31: ../../sys/user.h:70: field `e_vm' has incomplete type In file included from ../../i386/isa/sound/sound_config.h:186, from ../../i386/isa/sound/dev_table.c:31: ../../i386/isa/sound/sound_calls.h:166: warning: redundant redeclaration of `gusintr' in same scope ./ioconf.h:17: warning: previous declaration of `gusintr' ../../i386/isa/sound/dev_table.c:41: warning: no previous prototype for `snd_find_driver' ../../i386/isa/sound/dev_table.c:131: warning: no previous prototype for `sndtable_init' ../../i386/isa/sound/dev_table.c:137: warning: no previous prototype for `sound_unload_drivers' ../../i386/isa/sound/dev_table.c:162: warning: no previous prototype for `sound_unload_driver' ../../i386/isa/sound/dev_table.c:194: warning: no previous prototype for `sndtable_probe' ../../i386/isa/sound/dev_table.c:265: warning: no previous prototype for `sndtable_init_card' ../../i386/isa/sound/dev_table.c:323: warning: no previous prototype for `sndtable_identify_card' ../../i386/isa/sound/dev_table.c:345: warning: no previous prototype for `sound_chconf' ../../i386/isa/sound/dev_table.c:375: warning: no previous prototype for `sound_getconf' *** Error code 1 just for your information, my kernel definitions are as follows, thanks for your continuing help! -whchoi # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # $Id: GENERIC,v 1.69 1996/05/01 03:26:58 bde Exp $ # machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident GENERIC maxusers 10 options SYSVMSG options SYSVSEM options SYSVSHM options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MULTICAST options GRF_NTSC options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative config kernel root on wd0 controller isa0 controller eisa0 controller pci0 device meteor0 options METEOR_ALLOC_PAGES=151 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM # A single entry for any of these controllers (ncr, ahb, ahc) is sufficient # for any number of installed devices. #controller ncr0 #controller ahb0 controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seai ntr controller scbus0 device sd0 device od0 device st0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio controller snd0 device gus0 at isa? port 0x220 irq 11 drq 1 flags 0x3 vector gusintr # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0 .5 #options XSERVER # include code for XFree86 #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty device lpt2 at isa? port? tty device mse0 at isa? port 0x23c tty irq 5 vector mseintr device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vecto r psmintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 device fxp0 device vx0 device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr device ep0 at isa? port 0x300 net irq 10 vector epintr device fe0 at isa? port 0x300 net irq ? vector feintr device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 # keep this if you want to be able to continue to use /stand/sysinstall pseudo-device gzip # Exec gzipped a.out's