Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 1 Feb 2006 11:56:03 +0100
From:      =?ISO-8859-1?Q?Johan_Str=F6m?= <johan@stromnet.org>
To:        holm@freibergnet.de, freebsd-stable@freebsd.org
Subject:   Re: SCSI device timeout
Message-ID:  <F20B9E1F-19FD-4089-A940-F41D46C21457@stromnet.org>
In-Reply-To: <20060201104249.GA1263@pegasus.freiberg-net.de>
References:  <001c01c62666$76b26400$0102a8c0@bogomip> <20060201095718.GA1025@pegasus.freiberg-net.de> <938E255B-24CC-4844-B077-A623795300D9@stromnet.org> <20060201104249.GA1263@pegasus.freiberg-net.de>

next in thread | previous in thread | raw e-mail | index | archive | help

On 1 feb 2006, at 11.42, Holm Tiffe wrote:

> Johan Str=F6m wrote:
>
>> On 1 feb 2006, at 10.57, Holm Tiffe wrote:
>>
>>> Derkjan de Haan wrote:
>>>
>>>> All,
>>>>
>>>> Today, after a cvsup (RELENG_6) and a rebuild of kernel and =20
>>>> world, my
>>>> system no longer boots. It hangs on
>>>>
>>>> Waiting 5 seconds for SCSI devices to settle
>>>>
>>>> Booting from the previous kernel allows my system to boot again.
>>>> Please let
>>>> me know if I can do anything to diagnose further.
>>>>
>>>>
>>>> regards,
>>>>
>>>> Derkjan de Haan
>>>>
>>>
>>> I have exactly the same problem here on a ASUS A7V333 Motherboard =20=

>>> and
>>> an Adaptec 3960D SCSI Controller.
>>>
>>> The problem seems to be in the acpi interrupt routing, I've updated
>>> the mainboard Bios to the last available version in the meantime
>>> (1018.004 Beta) with no luck. Disabling acpi completly helps booting
>>> the machine again..
>>
>> Hi
>>
>> I got one of those motherboards.. however no SCSI card but a promise.
>> Ive hade huge problems with it (check out the "Page fault, GEOM
>> problem??" thread). The problems i had was random crashes and very
>> bad speed to the disks.
>> It was solved by throwing the mobo out with a new one with nforce2
>> chipset... Got great speeds now and haven't had a crash since i
>> installed it (roughly a week now).
>>
>> Johan Str=F6m
>> johan@stromnet.org
>> http://www.stromnet.org/
>>
>
> No Johan, my A7V333 has no problem, it runs for arounrd 2 years now =20=

> as my
> personal workstation here at work 24/7.
>
> I've cvsupped RELENG_6 again for an hour or so and the now build =20
> kernel
> runs flawlessly. There are some new patches in the pci code.
>
> Regards,
>
> Holm
> --=20
> L&P::Kommunikation GbR          Holm Tiffe  * Administration, =20
> Development
> FreibergNet.de Internet Systems                     phone +49 3731 =20
> 419010
> Bereich Server & Technik                             fax +49 3731 =20
> 4196026
> D-09599 Freiberg * Am St. Niclas Schacht 13     http://=20
> www.freibergnet.de

Hi, yes I've been running it for around 2-3 years too, but with =20
linux. A couple of months ago I switched to fbsd and problems began =20
to occur.
Might not be the same problem however..




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F20B9E1F-19FD-4089-A940-F41D46C21457>