Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 27 Feb 2006 18:27:36 +0200
From:      Stoyan Dimov <FreeBSD-multimedia@subscriptions.systeem.com>
To:        freebsd-multimedia@freebsd.org
Subject:   PixelView PlayTV Pro2 problems
Message-ID:  <200602271827.36998.FreeBSD-multimedia@subscriptions.systeem.com>

next in thread | raw e-mail | index | archive | help
Hi!

I have PixelView PlayTV Pro2. A small label on the box also says
PV-M4500(W/FM, RC). Needless to say I tried everything that came to my mind 
and I could read up on the Internet with very little luck.

All I get is a single channel (number19) but the program I get shows on 
channel 78 when using Windows. Radio doesn't work at all. Neither does the 
remote control but that's my least problem now. I tried with fxtv and xawtv 
on 6-Stable as of 02/28/2006 (FreeBSD 6.1-PRERELEASE i386)

I noticed that Karol's post
http://lists.freebsd.org/mailman/htdig/freebsd-multimedia/2006-January/003570.html
lists the same pciconf -l -v output as mine:

bktr0@pci1:7:0: class=0x040000 card=0x00000000 chip=0x036e109e rev=0x11 
hdr=0x00
    vendor   = 'Conexant (Was: Brooktree Corp)'
    device   = 'Bt878/Fusion 878A Mediastream Controller'
    class    = multimedia
    subclass = video
none3@pci1:7:1: class=0x048000 card=0x00000000 chip=0x0878109e rev=0x11 
hdr=0x00
    vendor   = 'Conexant (Was: Brooktree Corp)'
    device   = 'Bt878/Fusion878A Video Capture (Audio Section)'
    class    = multimedia

The following settings seems to "work" best for me:
hw.bt848.slow_msp_audio: -1
hw.bt848.format: -1
hw.bt848.reverse_mute: -1
hw.bt848.tuner: 7
hw.bt848.card: 22

Here is the dmesg output:

bktr0: <BrookTree 878> mem 0xe6100000-0xe6100fff irq 19 at device 7.0 on pci1
bktr0: [GIANT-LOCKED]
bktr0: Card has no configuration EEPROM. Cannot determine card make.
bktr0: MT2032: Companycode=7878 Part=78 Revision=78
bktr0: MT2032 not found or unknown type
bktr0: Pinnacle/Miro TV, Temic PAL I tuner.

Using tuner=2 does the same

Does anyone know how to get this card working or if it doesn't work for sure. 

Any help is highly appreciated!

Thanking you in advance,
Stoyan



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200602271827.36998.FreeBSD-multimedia>