Date: Wed, 28 May 2008 08:30:19 +0200 From: Ian FREISLICH <ianf@clue.co.za> To: current@freebsd.org Subject: Re: Unconditional 30s boot delay. Message-ID: <E1K1FAx-0000it-3t@clue.co.za> In-Reply-To: Message from Ian FREISLICH <ianf@clue.co.za> of "Wed, 28 May 2008 08:25:50 %2B0200."
next in thread | previous in thread | raw e-mail | index | archive | help
Ian FREISLICH wrote: > Which is fine and well if routing runs *after* the DHCP request, > but it doesn't it runs before devd is started so the default route > from DHCP is never acquired and we wait... for 30s.... > > And this needs an "echo" after the "done" so that the next script's > output lands up at the start of the next line. Forgot to add this console log in support: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 inet 127.0.0.1 netmask 0xff000000 vr0: link state changed to UP vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=2808<VLAN_MTU,WOL_UCAST,WOL_MAGIC> ether 00:40:63:f4:22:7e media: Ethernet autoselect (100baseTX <full-duplex>) status: active Additional routing options: IP gateway=YES. Waiting 30s for an interface to come up: .............................Starting d evd. hw.acpi.cpu.cx_lowest: C1 -> C1 DHCPREQUEST on vr0 to 255.255.255.255 port 67 DHCPACK from 10.0.0.1 bound to 10.0.0.223 -- renewal in 216000 seconds. Firewall rules loaded. Ian -- Ian Freislich
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1K1FAx-0000it-3t>