Date: Thu, 12 Jul 2001 12:16:28 -0400 From: "Antoine Beaupre (LMC)" <Antoine.Beaupre@ericsson.ca> To: freebsd-stable@FreeBSD.ORG Cc: brian@Awfulhak.org Subject: Problem with user-pppoe after upgrade, fixed Message-ID: <3B4DCD5C.4060004@lmc.ericsson.se>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------090905060702090808000200 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Hi. After a stable upgrade from 2001.06.09 to 2001.07.09, I had some problems connecting to my PPPoe provider. ppp was falling into a loop like this one: Jul 12 08:28:34 khan ppp[144]: tun0: Phase: deflink: hangup -> opening Jul 12 08:28:34 khan ppp[144]: tun0: Phase: deflink: Enter pause (3) for redialing. Jul 12 08:28:37 khan ppp[144]: tun0: Phase: deflink: Connected! Jul 12 08:28:37 khan ppp[144]: tun0: Phase: deflink: opening -> dial Jul 12 08:28:37 khan ppp[144]: tun0: Phase: deflink: dial -> carrier Jul 12 08:28:38 khan ppp[144]: tun0: Phase: Received NGM_PPPOE_SUCCESS (hook "tun0") Jul 12 08:28:38 khan ppp[144]: tun0: Phase: deflink: carrier -> login Jul 12 08:28:38 khan ppp[144]: tun0: Phase: deflink: login -> lcp Jul 12 08:28:39 khan ppp[144]: tun0: Phase: deflink: Too many LCP NAKs sent - abandoning negotiation Jul 12 08:28:39 khan ppp[144]: tun0: Phase: deflink: Disconnected! Jul 12 08:28:39 khan ppp[144]: tun0: Phase: deflink: lcp -> logout Jul 12 08:28:39 khan ppp[144]: tun0: Phase: deflink: logout -> hangup Jul 12 08:28:39 khan ppp[144]: tun0: Phase: deflink: Disconnected! Jul 12 08:28:39 khan ppp[144]: tun0: Phase: deflink: Connect time: 2 secs: 482 octets in, 294 octets out Jul 12 08:28:39 khan ppp[144]: tun0: Phase: deflink: : 594 packets in, 540 packets out Jul 12 08:28:39 khan ppp[144]: tun0: Phase: total 388 bytes/sec, peak 0 bytes/sec on Thu Jul 12 08:2 Jul 12 08:28:34 khan ppp[144]: tun0: Phase: deflink: hangup -> opening [on so on...] For the record, changing the mtu and the mru from 1500 to 1492 fixed the problem, I don't know why. I've been told that having that set to 1500 was not a good idea in the first place, but it *did* work before. :) I can provide more debug information tonight if necessary, but for that I must just down network access (pppoe) and since I'm remote now.. :) Brian, I think I guess your answer: "can you send me the output of set log +lcp?" :) Yes, I will, tonight. Also, for the record, ng* modules are loaded on boot as klds, my censored ppp.conf file is attached, along with a nice dmesg. cvsup logs are available at: http://ftp.anarcat.dyndns.org/ftp/pub/FreeBSD/local_info/ Thanks for any info. A. -- Antoine Beaupré Jambala TCM team Ericsson Canada inc. mailto:antoine.beaupre@ericsson.ca --------------090905060702090808000200 Content-Type: text/html; name="ppp.conf" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="ppp.conf" <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <HTML><HEAD> <TITLE>403 Forbidden</TITLE> </HEAD><BODY> <H1>Forbidden</H1> You don't have permission to access /ftp/pub/FreeBSD/local_info/ppp.conf on this server.<P> <HR> <ADDRESS>Apache/1.3.19 Server at www.anarcat.dyndns.org Port 80</ADDRESS> </BODY></HTML> --------------090905060702090808000200 Content-Type: text/plain; name="dmesg.boot" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.boot" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #1: Sat May 12 17:54:35 EDT 2001 anarcat@shall.anarcat.dyndns.org:/usr/obj/usr/src/sys/KHAN Timecounter "i8254" frequency 1193182 Hz CPU: i486 DX4 (486-class CPU) Origin = "GenuineIntel" Id = 0x480 Stepping = 0 Features=0x3<FPU,VME> real memory = 16777216 (16384K bytes) avail memory = 13799424 (13476K bytes) Preloaded elf kernel "kernel" at 0xc02b4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02b40a8. Preloaded elf module "netgraph.ko" at 0xc02b40f8. md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface isa0: <ISA bus> on motherboard ep0: <3Com 3C509-TPO EtherLink III> at port 0x200-0x20f irq 5 on isa0 ep0: Ethernet address 00:10:5a:aa:51:33 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16450 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16450 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port pca0 at port 0x40 on isa0 ep1: <3Com 3C509B-TPO EtherLink III (PnP)> at port 0x210-0x21f irq 9 on isa0 ep1: Ethernet address 00:60:97:04:b7:ca IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default ad0: 122MB <QUANTUM ELS127A> [919/16/17] at ata0-master BIOSPIO ad1: 3079MB <QUANTUM FIREBALL ST3.2A> [6256/16/63] at ata0-slave BIOSPIO Mounting root from ufs:/dev/ad1a --------------090905060702090808000200-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3B4DCD5C.4060004>