Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 19 Jun 2002 08:49:13 -0500
From:      John Prince <johnp@lodgenet.com>
To:        bmah@FreeBSD.ORG
Cc:        Doug Barton <DougB@FreeBSD.ORG>, stable@FreeBSD.ORG
Subject:   Re: RFC:  Errata on CDROM installs (was Re: ATA Atapi 4.6 Release)
Message-ID:  <5.1.0.14.2.20020619083035.024232f8@popmail.ct.lodgenet.com>
In-Reply-To: <200206182344.g5INiNXd037143@intruder.bmah.org>
References:  <20020617213853.Y4899-100000@master.gorean.org> <20020617213853.Y4899-100000@master.gorean.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello Bruce..
While this worked on a 40x
I tried 4 different 52x cdroms and 2 50x cdroms that did not
work.  Both speeds were AOpen drives.
Error during Install:
         ACD0: READ_BIG - HARDWARE ERROR asc=0x08 asq=0x03 error=0x00
The cdrom works fine with same drive(s) on 4.5_release.
I will try a couple other drives that did not work (mitsumi and toshiba)

These results are with setting the DMA per the errata doc.
I am rebuilding from src right now, (RELENG_4) and will see what happens..
Or should I build from RELENG_4_6 ?

Thanks.
--john


At 04:44 PM 6/18/2002 -0700, Bruce A. Mah wrote:
>If memory serves me right, Doug Barton wrote:
> > This all looks good to me. John, can you confirm that the procedure below
> > works?
>
>I've written up a slightly more polished errata note; a PDF rendering is
>at the URL below.  Could someone tell me if this actually works or not?
>(I'm especially interested in feedback on the CD-ROM install procedure.)
>
>I have never seen the problem first-hand, so some of you folks who've
>actually experienced it need to say if I've got it right or not.
>
>http://people.freebsd.org/~bmah/doc/errata/article.pdf
>
>If this works, I will commit it and get it onto the Web site so users
>experiencing this problem can get a workaround in one easy-to-find
>place.
>
>Thanks,
>
>Bruce.
>
>
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.2.20020619083035.024232f8>