From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 00:18:56 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 58708106564A for ; Sun, 20 Nov 2011 00:18:56 +0000 (UTC) (envelope-from vogelke@hcst.net) Received: from beta.hcst.com (beta.hcst.com [192.52.183.241]) by mx1.freebsd.org (Postfix) with ESMTP id 1FA368FC13 for ; Sun, 20 Nov 2011 00:18:56 +0000 (UTC) Received: from beta.hcst.com (localhost [127.0.0.1]) by beta.hcst.com (8.14.3/8.14.3/Debian-5+lenny1) with ESMTP id pAK06lAF019657 for ; Sat, 19 Nov 2011 19:06:47 -0500 Received: (from vogelke@localhost) by beta.hcst.com (8.14.3/8.14.3/Submit) id pAK06lWD019656; Sat, 19 Nov 2011 19:06:47 -0500 Received: by kev.msw.wpafb.af.mil (Postfix, from userid 32768) id AEBD0BF4C; Sat, 19 Nov 2011 19:06:17 -0500 (EST) To: freebsd-questions@freebsd.org In-reply-to: <788196A576272A9B463EE70B@mac-pro.magehandbook.com> (message from Daniel Staal on Sat, 19 Nov 2011 11:06:43 -0400) Organization: Array Infotech X-Disclaimer: I don't speak for the USAF or Array Infotech. X-GPG-ID: 1024D/711752A0 2006-06-27 Karl Vogel X-GPG-Fingerprint: 56EB 6DBF 4224 C953 F417 CC99 4C7C 7D46 7117 52A0 References: <20111118230001.GJ8967@itcom245.staff.itd.umich.edu> <4EC6FE1A.2040207@gmail.com> <4EC76580.7060204@infracaninophile.co.uk> <788196A576272A9B463EE70B@mac-pro.magehandbook.com> Message-Id: <20111120000617.AEBD0BF4C@kev.msw.wpafb.af.mil> Date: Sat, 19 Nov 2011 19:06:17 -0500 (EST) From: vogelke+unix@pobox.com (Karl Vogel) Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: vogelke+unix@pobox.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 00:18:56 -0000 >> On Sat, 19 Nov 2011 11:06:43 -0400, >> Daniel Staal said: D> xz has only marginal improvements in compressed size over bzip2, and D> takes a lot more cpu/memory resources to compress. In most cases, I'd D> say it's the wrong choice for a compression format. However, the one D> place where it is unequivocally the *best* choice is one that will make D> it well known: Distributing archives. Along these same lines, it works well for large mostly-text files. I have a lot of historical data in text form, 60-100 Mb uncompressed per file, and I get ~18% smaller files using xz instead of bzip2. I know disk space is cheap, but our rack space is limited. -- Karl Vogel I don't speak for the USAF or my company > Sorry I'm taking up your ever so valuable disk space! That's okay, /dev/null is pretty big. --illoai@gmail.com, 14 Feb 2011 From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 00:38:23 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CB287106566B for ; Sun, 20 Nov 2011 00:38:23 +0000 (UTC) (envelope-from web@umich.edu) Received: from hackers.mr.itd.umich.edu (smtp.mail.umich.edu [141.211.14.81]) by mx1.freebsd.org (Postfix) with ESMTP id 6F0808FC08 for ; Sun, 20 Nov 2011 00:38:23 +0000 (UTC) Received: FROM itcom245.staff.itd.umich.edu (itcom245.staff.itd.umich.edu [141.213.135.249]) By hackers.mr.itd.umich.edu ID 4EC84BFE.5DFA4.26126 ; Authuser web; 19 Nov 2011 19:38:22 EST Date: Sat, 19 Nov 2011 19:38:22 -0500 From: William Bulley To: Edward Martinez Message-ID: <20111120003822.GE13594@itcom245.staff.itd.umich.edu> Mail-Followup-To: Edward Martinez , FreeBSD Questions Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i Cc: FreeBSD Questions Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 00:38:23 -0000 According to Edward Martinez on Sat, 11/19/11 at 19:02: > > I got interested and downloaded it to try myself. I installed 9.0 in > virtualbox using the guided option and it installed. just > wondering if you tried installing with guided option instead of > manual? Now I will try using manual and see what happens I did not try guided. Regards, web... -- William Bulley Email: web@umich.edu 72 characters width template ----------------------------------------->| From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 01:06:06 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8BC7E1065670 for ; Sun, 20 Nov 2011 01:06:06 +0000 (UTC) (envelope-from dalescott@shaw.ca) Received: from idcmail-mo1so.shaw.ca (idcmail-mo1so.shaw.ca [24.71.223.10]) by mx1.freebsd.org (Postfix) with ESMTP id 5E5F08FC0C for ; Sun, 20 Nov 2011 01:06:06 +0000 (UTC) Received: from pd3ml1so-ssvc.prod.shaw.ca ([10.0.141.140]) by pd3mo1so-svcs.prod.shaw.ca with ESMTP; 19 Nov 2011 18:06:05 -0700 X-Cloudmark-SP-Filtered: true X-Cloudmark-SP-Result: v=1.1 cv=eTJRJPHZZZWek+qC+nfScrEiYJb5tABmnXXNF5EupGQ= c=1 sm=1 a=E-IyYoEzPcsA:10 a=BLceEmwcHowA:10 a=kj9zAlcOel0A:10 a=s1lrx0EV61IYYNPiyc1Uww==:17 a=aGESXyzhNX8eO8BB2SUA:9 a=CjuIK1q_8ugA:10 a=HpAAvcLHHh0Zw7uRqdWCyQ==:117 Received: from unknown (HELO HPdv9000) ([70.73.37.138]) by pd3ml1so-dmz.prod.shaw.ca with ESMTP; 19 Nov 2011 18:06:02 -0700 From: "Dale Scott" To: References: <4ec72c45.hSiwNLKKW0mrpeHz%perryh@pluto.rain.com> In-Reply-To: <4ec72c45.hSiwNLKKW0mrpeHz%perryh@pluto.rain.com> Date: Sat, 19 Nov 2011 18:05:59 -0700 Message-ID: <01d301cca720$9108b200$b31a1600$@shaw.ca> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Outlook 14.0 Thread-Index: AQEuisERMprzTK3AG5W+pNc9R3uCogJJd5bjlt7futA= Content-Language: en-us Subject: RE: Webmail for local system mail X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 01:06:06 -0000 > sysutils/webmin will work without much configuration. Some of the other > more traditional one like squirrelmail will work as well, but some extra config > may be required. Webmin++ (and just plain handy for a whole lot more!) Dale From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 01:58:59 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DC0171065674 for ; Sun, 20 Nov 2011 01:58:59 +0000 (UTC) (envelope-from conrads@cox.net) Received: from eastrmfepi203.cox.net (eastrmfepi203.cox.net [68.230.241.207]) by mx1.freebsd.org (Postfix) with ESMTP id 854408FC1A for ; Sun, 20 Nov 2011 01:58:59 +0000 (UTC) Received: from eastrmimpo306.cox.net ([68.230.241.238]) by eastrmfepo203.cox.net (InterMail vM.8.01.04.00 201-2260-137-20101110) with ESMTP id <20111120014031.IEJB25070.eastrmfepo203.cox.net@eastrmimpo306.cox.net>; Sat, 19 Nov 2011 20:40:31 -0500 Received: from serene.no-ip.org ([98.164.86.236]) by eastrmimpo306.cox.net with bizsmtp id zDgW1h00F55wwzE02DgWg8; Sat, 19 Nov 2011 20:40:30 -0500 X-CT-Class: Clean X-CT-Score: 0.00 X-CT-RefID: str=0001.0A020208.4EC85A8E.00AF,ss=1,re=0.000,fgs=0 X-CT-Spam: 0 X-Authority-Analysis: v=1.1 cv=cdJjHAINPiZBdT+VAeFfLOvj93neuvwrRIGsWSZO+Cw= c=1 sm=1 a=SUp_pKQUj1kA:10 a=G8Uczd0VNMoA:10 a=kj9zAlcOel0A:10 a=uAbGmPAyUfLL1M3oYAsfuA==:17 a=6I5d2MoRAAAA:8 a=kviXuzpPAAAA:8 a=Ngbr-iO39LyRuYprh_cA:9 a=Kix7Z54OqbtkL-BD4bYA:7 a=CjuIK1q_8ugA:10 a=2T2vCPrP5NoA:10 a=4vB-4DCPJfMA:10 a=uAbGmPAyUfLL1M3oYAsfuA==:117 X-CM-Score: 0.00 Authentication-Results: cox.net; none Received: from cox.net (localhost [127.0.0.1]) by serene.no-ip.org (8.14.5/8.14.5) with ESMTP id pAK1eUfx018815; Sat, 19 Nov 2011 19:40:30 -0600 (CST) (envelope-from conrads@cox.net) Date: Sat, 19 Nov 2011 19:40:25 -0600 From: "Conrad J. Sabatier" To: jau@iki.fi Message-ID: <20111119194025.1ea5eec6@cox.net> In-Reply-To: <201111191054.pAJAsI9q087098@jau.iki.fi> References: <201111191054.pAJAsI9q087098@jau.iki.fi> X-Mailer: Claws Mail 3.7.10 (GTK+ 2.24.6; amd64-portbld-freebsd9.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: AMD64 with 9.0 PRERELEASE freezing/hanging without any messages X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 01:58:59 -0000 On Sat, 19 Nov 2011 12:54:18 +0200 (EET) jau@iki.fi (Jukka A. Ukkonen) wrote: > > Hello, > > Has anyone else noticed a similar odd behavior with AMD64 and 9.0 > prerelease (as well as RCs and betas)? Yes, I've seen a few of these myself, under both of the RCs and PRERELEASE. No idea what the cause is, though. Impossible to track down. > On my 12 core (2*4162EE) the whole system just freezes quite often > without any warning, without any messages being logged. Neither is > there any panic message from the kernel. The system just suddenly > hangs such that there is no alternative but to reboot using the > reset button. Yes, exactly the same here. Doesn't happen often, but it does happen. > At the moment I don't have any further info about the cause of the > problem, but quite often the freeze has happened when there has been > some network activity. > Does anyone have an idea how to start tracking down such a problem? > I mean anything in addition to this... > http://www.freebsd.org/doc/en/books/developers-handbook/kerneldebug-options.html Sorry, wish I had a clue as to how to pinpoint the cause of these hangs. There's no record anywhere of what may have gone wrong. If you find out anything, please let us know. -- Conrad J. Sabatier conrads@cox.net From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 05:27:43 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A5D451065670 for ; Sun, 20 Nov 2011 05:27:43 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (wonkity.com [67.158.26.137]) by mx1.freebsd.org (Postfix) with ESMTP id 658458FC14 for ; Sun, 20 Nov 2011 05:27:43 +0000 (UTC) Received: from wonkity.com (localhost [127.0.0.1]) by wonkity.com (8.14.5/8.14.5) with ESMTP id pAK5Rg9P021354; Sat, 19 Nov 2011 22:27:42 -0700 (MST) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.14.5/8.14.5/Submit) with ESMTP id pAK5RgP8021351; Sat, 19 Nov 2011 22:27:42 -0700 (MST) (envelope-from wblock@wonkity.com) Date: Sat, 19 Nov 2011 22:27:42 -0700 (MST) From: Warren Block To: perryh@pluto.rain.com In-Reply-To: <4ec8ce86.SUQIYIhDcM4XkICl%perryh@pluto.rain.com> Message-ID: References: <201111190050.05726.admin@vizion2000.net> <4ec8ce86.SUQIYIhDcM4XkICl%perryh@pluto.rain.com> User-Agent: Alpine 2.00 (BSF 1167 2008-08-23) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.7 (wonkity.com [127.0.0.1]); Sat, 19 Nov 2011 22:27:42 -0700 (MST) Cc: questions@freebsd.org, david@vizion2000.net Subject: Re: epson printers on amd64 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 05:27:43 -0000 On Sun, 20 Nov 2011, perryh@pluto.rain.com wrote: > Warren Block wrote: >> On Sat, 19 Nov 2011, David Southwell wrote: >>> Anyone up to date on how to do high quality printing with >>> epson inkjet printers (in my case r2400 and r2880) on amd64 >>> systems. print/pips* reports they require 386 and do not >>> compile on amd64. >> >> print/gimp-gutenprint works pretty well from Gimp, although >> I have not figured out how to get consistent color and brightness. >> It supports both of those printers. > > I'm sure I'm not alone in doubting that _any_ ink-spitter is likely to > produce "high quality printing" or "consistent color and brightness", > regardless of the host support used. Those printers are designed to > be manufactured as inexpensively as possible so as to be sold at very > low prices, the profit being in the recurring ink sales. "Cheap" and > "high quality" tend to be incompatible design goals. (Sorry, I hadn't realized I was replying on -emulation, which is meant for computer emulation. CCed to -questions on this reply.) Quality color photos are the one area where inkjets really can do a good job. Experimenting with cheap Epson R200 and R280 has shown that they can print better quality photos than local photo printing places. Color and brightness are consistent until I print a different photo. Gutenprint saves the settings, it's just that they don't work the same with different photos. Possibly this is due to my changing the wrong adjustments. Oh, and I've only used Gutenprint on 32-bit systems so far. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 07:34:28 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7E8E11065670 for ; Sun, 20 Nov 2011 07:34:28 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp6.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3fd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id DE5308FC0A for ; Sun, 20 Nov 2011 07:34:27 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pAK7YIl4051215 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO) for ; Sun, 20 Nov 2011 07:34:19 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pAK7YIl4051215 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1321774459; bh=piyUTauBB2P3xDoPI/aVTwlJTN9D5sXEKQZBgvmJq7o=; h=Message-ID:Date:From:MIME-Version:To:Subject:References: In-Reply-To:Content-Type:Cc; b=FLRJRWADDo17xpG5Gq4yl4ML62+Zp7o9/Pp/5+8XyzOyvf9rNFg93Q03UIfPwODrS 8Pg0he3dqebgstjLtOKe06aJ1qx+NLwKCnsjjgEw7KIsPgbCmkslgN+S9AxJ9mwlFl zsI53C1HZKCkh5+TZUrNp3VNvwArwrCwGxcNic1I= Message-ID: <4EC8AD6E.9000305@infracaninophile.co.uk> Date: Sun, 20 Nov 2011 07:34:06 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <20111119223633.GD13594@itcom245.staff.itd.umich.edu> In-Reply-To: <20111119223633.GD13594@itcom245.staff.itd.umich.edu> X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig2F0142CF202CD59EBEAF588F" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-0.6 required=5.0 tests=BAYES_05,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 07:34:28 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig2F0142CF202CD59EBEAF588F Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 19/11/2011 22:36, William Bulley wrote: > Possible, but unlikely. Plus I doubt that 'tar -tvf base.txz' without = a > pipe having an "xzcat(1)" in front of the "tar(1)" command. Maybe ther= e > is an "xz" option for tar(1) during extraction mode, but my tar(1) man > page doesn't list any, sigh... It does list -y and -z options for othe= r > compression/decompression modes, hmmm.... :-( bsdtar(1) -- accept no substitutes. Well, actually, it's libarchive which bsdtar is built on top of. It automatically recognizes most compression formats and most types of data archive -- including a few that you probably wouldn't have thought of in that context. Try running it against a .iso CDRom image. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------enig2F0142CF202CD59EBEAF588F Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7IrXoACgkQ8Mjk52CukIxjyQCeP81qTlryfCk7OFucRPIH5wXe eGMAnj5ikN0LfUxYcZhl+2NCdVTSZB5O =10/w -----END PGP SIGNATURE----- --------------enig2F0142CF202CD59EBEAF588F-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 07:37:35 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8E4CA106566C for ; Sun, 20 Nov 2011 07:37:35 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp6.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3fd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id 1FA598FC08 for ; Sun, 20 Nov 2011 07:37:34 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pAK7bVBa051261 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO); Sun, 20 Nov 2011 07:37:31 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pAK7bVBa051261 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1321774651; bh=izTpAENlOIMvWGFGSuWzwuq2mH0y0ER+yfWLQo30Alk=; h=Message-ID:Date:From:MIME-Version:To:CC:Subject:References: In-Reply-To:Content-Type; b=arWMGGXKwD/vKlZXwvvQtwvkIR4hDfSk6h/BW9FdKEXHQBqpoRuauQyeC/82Rlvza V/DugkS+gJn5Tmw6knvV0BupG8ROD4IgannvzllJ1q+F04mEmPleSPvHMzMUZajO3W oEXjDkc5+pOJt3zYrpF+YGEomySHPCQMV8qipkiY= Message-ID: <4EC8AE3A.8000600@infracaninophile.co.uk> Date: Sun, 20 Nov 2011 07:37:30 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: Robert Simmons References: <005301cca2b7$add11f20$09735d60$@co.ke> <4EC13877.3070704@bio.umass.edu> <4EC6BC2F.5030907@bio.umass.edu> <4EC6C506.2090206@infracaninophile.co.uk> In-Reply-To: X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enigF819416C98B656882C401538" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-0.1 required=5.0 tests=BAYES_20,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Cc: freebsd-questions@freebsd.org Subject: Re: 8.2-RELEASE-p4 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 07:37:35 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enigF819416C98B656882C401538 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 19/11/2011 23:26, Robert Simmons wrote: > On Fri, Nov 18, 2011 at 3:50 PM, Matthew Seaman > wrote: >> If you compile your own kernel, then freebsd-update will patch the >> kernel sources, but leave you to rebuild and reinstall your customized= >> kernel. >> >> I don't know about the -p4 update. By rights it should have involved >> updating the kernel by one or other of the two methods shown. So far >> however, we've seen two reports questioning that[*] and none saying th= at >> the -p4 update did in fact update the kernel. Which is suspicious, bu= t >> hardly conclusive. >=20 > Do you compile your own kernel, or do you have a machine that uses > GENERIC? If you do, what is the output of uname -a on it? Me personally? No, in general I track -STABLE on my systems. Try asking the OP. Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------enigF819416C98B656882C401538 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7IrjsACgkQ8Mjk52CukIzq1ACeOgxe/1+xwLbZGqTHUKq+JgQi asoAn1s1yLv8XGSYV9ZvO9/NlRAlW7JW =ytnH -----END PGP SIGNATURE----- --------------enigF819416C98B656882C401538-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 10:30:27 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 17B321065755 for ; Sun, 20 Nov 2011 10:30:27 +0000 (UTC) (envelope-from nvass@gmx.com) Received: from mailout-eu.gmx.com (mailout-eu.gmx.com [213.165.64.44]) by mx1.freebsd.org (Postfix) with SMTP id 67BDC8FC08 for ; Sun, 20 Nov 2011 10:30:26 +0000 (UTC) Received: (qmail invoked by alias); 20 Nov 2011 10:30:24 -0000 Received: from adsl-12.109.242.22.tellas.gr (EHLO [192.168.73.193]) [109.242.22.12] by mail.gmx.com (mp-eu004) with SMTP; 20 Nov 2011 11:30:24 +0100 X-Authenticated: #46156728 X-Provags-ID: V01U2FsdGVkX194rCtXn/14tP03jn+7na9Hfl5QYFDA79BeXPBRRY /4EnwIjjqNEFy5 Message-ID: <4EC8D6B9.90609@gmx.com> Date: Sun, 20 Nov 2011 12:30:17 +0200 From: Nikos Vassiliadis User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.17) Gecko/20110414 Thunderbird/3.1.10 MIME-Version: 1.0 To: Jim Pazarena References: <4EC813BA.1050408@paz.bz> In-Reply-To: <4EC813BA.1050408@paz.bz> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Y-GMX-Trusted: 0 Cc: freebsd-questions@freebsd.org Subject: Re: radiusd-cistron X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 10:30:27 -0000 On 11/19/2011 10:38 PM, Jim Pazarena wrote: > I recently switched from FBSD 7.0 i386 > to FBSD 8.2 amd64 > > my radius only sees garbage in place of the password, so no one > can authenticate. > > Since I changed both OS (7.0->8.2) AND platform (i386->amd64), I am > unsure where to start looking for an encryption problem. > > Any suggestions would be appreciated. Yes, I could switch to > freeradius, but would that change/help an encryption issue? I am not sure if cistron works correctly on 64bit architectures. Is plain text authentication working? Cistron is unmaintained, but there is a very low traffic mailing list, you could ask there. http://lists.cistron.nl/mailman/listinfo/cistron-radius HTH, Nikos From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 10:46:06 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CB21D1065672 for ; Sun, 20 Nov 2011 10:46:06 +0000 (UTC) (envelope-from mueller6727@bellsouth.net) Received: from fmailhost02.isp.att.net (fmailhost02.isp.att.net [207.115.11.52]) by mx1.freebsd.org (Postfix) with ESMTP id B9CD58FC0C for ; Sun, 20 Nov 2011 10:46:06 +0000 (UTC) Date: Sun, 20 Nov 2011 10:46:06 +0000 (GMT) X-Comment: Sending client does not conform to RFC822 minimum requirements X-Comment: Date has been added by Maillennium Received: from localhost (adsl-68-18-111-140.sdf.bellsouth.net[68.18.111.140]) by isp.att.net (frfwmhc02) with SMTP id <20111120104605H02007qsgee>; Sun, 20 Nov 2011 10:46:05 +0000 X-Originating-IP: [68.18.111.140] From: "Thomas Mueller" To: freebsd-questions@FreeBSD.org References: <20111119223633.GD13594@itcom245.staff.itd.umich.edu> Message-Id: <20111120104606.CB21D1065672@hub.freebsd.org> Cc: William Bulley Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 10:46:06 -0000 from William Bulley : > Possible, but unlikely. Plus I doubt that 'tar -tvf base.txz' without a > pipe having an "xzcat(1)" in front of the "tar(1)" command. Maybe there > is an "xz" option for tar(1) during extraction mode, but my tar(1) man > page doesn't list any, sigh... It does list -y and -z options for other > compression/decompression modes, hmmm.... :-( It looks like tar in extraction mode automatically recognizes xz compression in the file to be extracted from. Section from the man page for tar in FreeBSD 9.0-RC1: -J, --xz (c mode only) Compress the resulting archive with xz(1). In extract or list modes, this option is ignored. Note that, unlike other tar implementations, this implementation recognizes XZ com- pression automatically when reading archives. Tom From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 10:50:58 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E60A5106566B for ; Sun, 20 Nov 2011 10:50:58 +0000 (UTC) (envelope-from david@vizion2000.net) Received: from dns1.vizion2000.net (dns1.vizion2000.net [62.49.197.50]) by mx1.freebsd.org (Postfix) with ESMTP id 9F12A8FC13 for ; Sun, 20 Nov 2011 10:50:58 +0000 (UTC) Received: by dns1.vizion2000.net (Postfix, from userid 1004) id 2BCE8119C53; Sun, 20 Nov 2011 01:33:54 -0800 (PST) From: David Southwell Organization: Vision Communications To: Warren Block Date: Sun, 20 Nov 2011 01:33:53 -0800 User-Agent: KMail/1.13.7 (FreeBSD/8.2-RELEASE; KDE/4.7.3; amd64; ; ) References: <201111190050.05726.admin@vizion2000.net> <4ec8ce86.SUQIYIhDcM4XkICl%perryh@pluto.rain.com> In-Reply-To: MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201111200133.54033.david@vizion2000.net> Cc: questions@freebsd.org, perryh@pluto.rain.com Subject: Re: epson printers on amd64 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 10:50:59 -0000 On Saturday 19 November 2011 21:27:42 Warren Block wrote: > On Sun, 20 Nov 2011, perryh@pluto.rain.com wrote: > > Warren Block wrote: > >> On Sat, 19 Nov 2011, David Southwell wrote: > >>> Anyone up to date on how to do high quality printing with > >>> epson inkjet printers (in my case r2400 and r2880) on amd64 > >>> systems. print/pips* reports they require 386 and do not > >>> compile on amd64. > >> > >> print/gimp-gutenprint works pretty well from Gimp, although > >> I have not figured out how to get consistent color and brightness. > >> It supports both of those printers. > > > > I'm sure I'm not alone in doubting that _any_ ink-spitter is likely to > > produce "high quality printing" or "consistent color and brightness", > > regardless of the host support used. Those printers are designed to > > be manufactured as inexpensively as possible so as to be sold at very > > low prices, the profit being in the recurring ink sales. "Cheap" and > > "high quality" tend to be incompatible design goals. > > (Sorry, I hadn't realized I was replying on -emulation, which is meant > for computer emulation. CCed to -questions on this reply.) > > Quality color photos are the one area where inkjets really can do a good > job. Experimenting with cheap Epson R200 and R280 has shown that they > can print better quality photos than local photo printing places. > > Color and brightness are consistent until I print a different photo. > Gutenprint saves the settings, it's just that they don't work > the same with different photos. Possibly this is due to my changing the > wrong adjustments. > > Oh, and I've only used Gutenprint on 32-bit systems so far. To get high quality printing with good inkjet printeres like r2400 and r2880 here are the main steps I follow: 1. Define the colour space (e.g adobe rgb 1998) to be used when the image is being captured. 2. Shoot using the correct white space setting for the scene. 3. Load onto the computer having first profiled your monitor. 4. Use your preferred editing software (e.g. photoshop) using a defined working space colour profile e.g. adobe 1998 (I prefer prophoto which is 32bit floating decimal point). 5. Convert the colour profile of the image to the working colour space. 6. Process the image. 7. When processing complete choose the paper for printing. 8. Make sure you have a suitable colour profile for that paper for your chosen printer. 9. Print using the appropriate paper profile. . From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 10:59:48 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 255BF106566B for ; Sun, 20 Nov 2011 10:59:48 +0000 (UTC) (envelope-from david@vizion2000.net) Received: from dns1.vizion2000.net (dns1.vizion2000.net [62.49.197.50]) by mx1.freebsd.org (Postfix) with ESMTP id CF5058FC08 for ; Sun, 20 Nov 2011 10:59:47 +0000 (UTC) Received: by dns1.vizion2000.net (Postfix, from userid 1004) id 4C905119C53; Sun, 20 Nov 2011 01:58:08 -0800 (PST) From: David Southwell Organization: Vision Communications To: freebsd-questions@freebsd.org Date: Sun, 20 Nov 2011 01:58:07 -0800 User-Agent: KMail/1.13.7 (FreeBSD/8.2-RELEASE; KDE/4.7.3; amd64; ; ) References: <201111190050.05726.admin@vizion2000.net> <201111200133.54033.david@vizion2000.net> In-Reply-To: <201111200133.54033.david@vizion2000.net> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201111200158.08181.david@vizion2000.net> Cc: questions@freebsd.org, perryh@pluto.rain.com Subject: Re: epson printers on amd64 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 10:59:48 -0000 On Sunday 20 November 2011 01:33:53 David Southwell wrote: > On Saturday 19 November 2011 21:27:42 Warren Block wrote: > > On Sun, 20 Nov 2011, perryh@pluto.rain.com wrote: > > > Warren Block wrote: > > >> On Sat, 19 Nov 2011, David Southwell wrote: > > >>> Anyone up to date on how to do high quality printing with > > >>> epson inkjet printers (in my case r2400 and r2880) on amd64 > > >>> systems. print/pips* reports they require 386 and do not > > >>> compile on amd64. > > >> > > >> print/gimp-gutenprint works pretty well from Gimp, although > > >> I have not figured out how to get consistent color and brightness. > > >> It supports both of those printers. > > > > > > I'm sure I'm not alone in doubting that _any_ ink-spitter is likely to > > > produce "high quality printing" or "consistent color and brightness", > > > regardless of the host support used. Those printers are designed to > > > be manufactured as inexpensively as possible so as to be sold at very > > > low prices, the profit being in the recurring ink sales. "Cheap" and > > > "high quality" tend to be incompatible design goals. > > > > (Sorry, I hadn't realized I was replying on -emulation, which is meant > > for computer emulation. CCed to -questions on this reply.) > > > > Quality color photos are the one area where inkjets really can do a good > > job. Experimenting with cheap Epson R200 and R280 has shown that they > > can print better quality photos than local photo printing places. > > > > Color and brightness are consistent until I print a different photo. > > Gutenprint saves the settings, it's just that they don't work > > the same with different photos. Possibly this is due to my changing the > > wrong adjustments. > > > > Oh, and I've only used Gutenprint on 32-bit systems so far. > > To get high quality printing with good inkjet printeres like r2400 and > r2880 here are the main steps I follow: > > 1. Define the colour space (e.g adobe rgb 1998) to be used when the image > is being captured. > > 2. Shoot using the correct white space setting for the scene. > > 3. Load onto the computer having first profiled your monitor. > > 4. Use your preferred editing software (e.g. photoshop) using a defined > working space colour profile e.g. adobe 1998 (I prefer prophoto which is > 32bit floating decimal point). > > 5. Convert the colour profile of the image to the working colour space. > > 6. Process the image. > > 7. When processing complete choose the paper for printing. > > 8. Make sure you have a suitable colour profile for that paper for your > chosen printer. > > 9. Print using the appropriate paper profile. > > > Sorry I should have mentioned that ghostscript are integrating colour profiling using icc profiles although the last time I checked there was no support for the kind of monitor profile creation devices such as those manufactured by datacolor which I use on I hate to say it MS$ systems. There is an interesting paper on Ghostscript Color Management to be found on www.artifex.com/Ghostscript_Color_Architecture.pdf david From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 11:16:02 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 46440106564A for ; Sun, 20 Nov 2011 11:16:02 +0000 (UTC) (envelope-from david@vizion2000.net) Received: from dns1.vizion2000.net (dns1.vizion2000.net [62.49.197.50]) by mx1.freebsd.org (Postfix) with ESMTP id F05F98FC16 for ; Sun, 20 Nov 2011 11:16:01 +0000 (UTC) Received: by dns1.vizion2000.net (Postfix, from userid 1004) id 4C905119C53; Sun, 20 Nov 2011 01:58:08 -0800 (PST) From: David Southwell Organization: Vision Communications To: freebsd-questions@freebsd.org Date: Sun, 20 Nov 2011 01:58:07 -0800 User-Agent: KMail/1.13.7 (FreeBSD/8.2-RELEASE; KDE/4.7.3; amd64; ; ) References: <201111190050.05726.admin@vizion2000.net> <201111200133.54033.david@vizion2000.net> In-Reply-To: <201111200133.54033.david@vizion2000.net> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201111200158.08181.david@vizion2000.net> Cc: questions@freebsd.org, perryh@pluto.rain.com Subject: Re: epson printers on amd64 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 11:16:02 -0000 On Sunday 20 November 2011 01:33:53 David Southwell wrote: > On Saturday 19 November 2011 21:27:42 Warren Block wrote: > > On Sun, 20 Nov 2011, perryh@pluto.rain.com wrote: > > > Warren Block wrote: > > >> On Sat, 19 Nov 2011, David Southwell wrote: > > >>> Anyone up to date on how to do high quality printing with > > >>> epson inkjet printers (in my case r2400 and r2880) on amd64 > > >>> systems. print/pips* reports they require 386 and do not > > >>> compile on amd64. > > >> > > >> print/gimp-gutenprint works pretty well from Gimp, although > > >> I have not figured out how to get consistent color and brightness. > > >> It supports both of those printers. > > > > > > I'm sure I'm not alone in doubting that _any_ ink-spitter is likely to > > > produce "high quality printing" or "consistent color and brightness", > > > regardless of the host support used. Those printers are designed to > > > be manufactured as inexpensively as possible so as to be sold at very > > > low prices, the profit being in the recurring ink sales. "Cheap" and > > > "high quality" tend to be incompatible design goals. > > > > (Sorry, I hadn't realized I was replying on -emulation, which is meant > > for computer emulation. CCed to -questions on this reply.) > > > > Quality color photos are the one area where inkjets really can do a good > > job. Experimenting with cheap Epson R200 and R280 has shown that they > > can print better quality photos than local photo printing places. > > > > Color and brightness are consistent until I print a different photo. > > Gutenprint saves the settings, it's just that they don't work > > the same with different photos. Possibly this is due to my changing the > > wrong adjustments. > > > > Oh, and I've only used Gutenprint on 32-bit systems so far. > > To get high quality printing with good inkjet printeres like r2400 and > r2880 here are the main steps I follow: > > 1. Define the colour space (e.g adobe rgb 1998) to be used when the image > is being captured. > > 2. Shoot using the correct white space setting for the scene. > > 3. Load onto the computer having first profiled your monitor. > > 4. Use your preferred editing software (e.g. photoshop) using a defined > working space colour profile e.g. adobe 1998 (I prefer prophoto which is > 32bit floating decimal point). > > 5. Convert the colour profile of the image to the working colour space. > > 6. Process the image. > > 7. When processing complete choose the paper for printing. > > 8. Make sure you have a suitable colour profile for that paper for your > chosen printer. > > 9. Print using the appropriate paper profile. > > > Sorry I should have mentioned that ghostscript are integrating colour profiling using icc profiles although the last time I checked there was no support for the kind of monitor profile creation devices such as those manufactured by datacolor which I use on I hate to say it MS$ systems. There is an interesting paper on Ghostscript Color Management to be found on www.artifex.com/Ghostscript_Color_Architecture.pdf david From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 11:25:36 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 45961106566B for ; Sun, 20 Nov 2011 11:25:36 +0000 (UTC) (envelope-from mueller6727@bellsouth.net) Received: from fmailhost02.isp.att.net (fmailhost02.isp.att.net [207.115.11.52]) by mx1.freebsd.org (Postfix) with ESMTP id 34B958FC18 for ; Sun, 20 Nov 2011 11:25:36 +0000 (UTC) Date: Sun, 20 Nov 2011 11:25:35 +0000 (GMT) X-Comment: Sending client does not conform to RFC822 minimum requirements X-Comment: Date has been added by Maillennium Received: from localhost (adsl-68-18-111-140.sdf.bellsouth.net[68.18.111.140]) by isp.att.net (frfwmhc02) with SMTP id <20111120112535H02007qmtle>; Sun, 20 Nov 2011 11:25:35 +0000 X-Originating-IP: [68.18.111.140] From: "Thomas Mueller" To: freebsd-questions@FreeBSD.org References: <87zkfsca5a.fsf@pluton.xbsd.name> Message-Id: <20111120112536.45961106566B@hub.freebsd.org> Cc: "Denise H. G." Subject: Re: file system on 9.0 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 11:25:36 -0000 from darcsis@gmail.com (Denise H. G.): > I strongly advise that /usr and /usr/local reside on different > partitions. Furthermore, If you plan to run a desktop environment, your > /usr/local should be big enough, say 8G - 10G, to hold all stuff you > built from the ports. And putting /var on a separate partitiion is a > good idea, I think. > You can find detailed information on how to lay out and size your > partitions in tuning(7) either locally or online. The one directory I really want to put on a separate partition is /home . That way, you can fully rebuild/redo your system and keep user data. I don't like to put /var on a separate partition because of the danger of running short of space. I had nervous moments when running freebsd-update on the older computer and seeing the used part of /var grow. I don't really see a need to put /usr/local on a separate partition, though conceivably you could build applications with both FreeBSD ports and NetBSD pkgsrc, but keep these separate. NetBSD pkgsrc has been ported to other (quasi-)Unixes including FreeBSD. Default directory corresponding to FreeBSD's /usr/local is /usr/pkg . I think I like FreeBSD ports better than NetBSD pkgsrc, the latter which I used only with NetBSD. I originally installed FreeBSD 9.0-BETA1 using bsdinstall on the USB stick, including the ports. There was a conflict when I ran "portsnap fetch update", that didn't work. I had to run "portsnap fetch" and "portsnap extract", scrapping the ports tree from bsdinstall in favor of the fresh ports tree. So now I know best to not install ports tree from bsdinstall; this would presumably apply for sysinstall too. Tom From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 11:42:59 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5D4C5106566C for ; Sun, 20 Nov 2011 11:42:59 +0000 (UTC) (envelope-from atr0x23@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id 29AE08FC0C for ; Sun, 20 Nov 2011 11:42:58 +0000 (UTC) Received: by iakl21 with SMTP id l21so8708481iak.13 for ; Sun, 20 Nov 2011 03:42:58 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; bh=Dwa96h9rP2oWIVVWCDiz7e81hOZOultzlWLdc+goJ1I=; b=Ts6fMUQxNEtNUDDVhhKHgMvpZcvH0ryj0zmxTRxLOP1ddAI9rHMLoq1bwqf6si/TVI 0bno7Q4BvnhZqEYRaOKerEwtpp1B6WGcdfDWOabxU75lD9dGtnoBX54bdQB13uGWjbSY lsS28FMBODdDYAcoSu2r+G/5Z94w7MsWO4LYU= MIME-Version: 1.0 Received: by 10.50.216.167 with SMTP id or7mr10420726igc.22.1321787843303; Sun, 20 Nov 2011 03:17:23 -0800 (PST) Received: by 10.42.175.135 with HTTP; Sun, 20 Nov 2011 03:17:23 -0800 (PST) In-Reply-To: References: Date: Sun, 20 Nov 2011 13:17:23 +0200 Message-ID: From: thanos trompoukis To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: The results of your email commands X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 11:42:59 -0000 I saw that the usb device is like a scsi "da" so now I am trying this: # mount -t msdosfs /dev/da0 /mnt/usb mount_msdosfs: /dev/da0: Invalid argument now what? how I have to refered on my usb device? I do not understand a word here....! thanx! 2011/11/19 > The results of your email command are provided below. Attached is your > original message. > > - Results: > Ignoring non-text/plain MIME parts > > - Unprocessed: > doing the follow: > First I am giving: mkdir mnt/usb > and then I am giving: mount -t msdos /dev/usb /mnt/usb > but I am seeing this on my screen: > mount: Using "-t msdosfs", since "-t msdos" is deprecated. > mount_msdosfs: /dev/usb: Block device required > I also trying: mount -t msdosfs /dev/usb /mnt/usb > But I am getting the same message: > mount_msdosfs: /dev/usb: Block device required > Any suggestions please? Because I am lost here, I have NO idea... > Thanx! > > - Done. > > > > ---------- Messaggio inoltrato ---------- > From: thanos trompoukis > To: freebsd-questions-request@freebsd.org > Date: Sat, 19 Nov 2011 17:33:09 +0200 > Subject: Can't mount usb disk > Hi...., I have freebsd 8.2 and I am trying to mount an external usb disk > doing the follow: > > First I am giving: mkdir mnt/usb > > and then I am giving: mount -t msdos /dev/usb /mnt/usb > > but I am seeing this on my screen: > mount: Using "-t msdosfs", since "-t msdos" is deprecated. > mount_msdosfs: /dev/usb: Block device required > > > I also trying: mount -t msdosfs /dev/usb /mnt/usb > But I am getting the same message: > mount_msdosfs: /dev/usb: Block device required > > > > Any suggestions please? Because I am lost here, I have NO idea... > > > Thanx! > > From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 11:44:51 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 37582106564A for ; Sun, 20 Nov 2011 11:44:51 +0000 (UTC) (envelope-from antonio@antonioshome.net) Received: from mail-ww0-f50.google.com (mail-ww0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id C9DE98FC12 for ; Sun, 20 Nov 2011 11:44:50 +0000 (UTC) Received: by wwg14 with SMTP id 14so7938631wwg.31 for ; Sun, 20 Nov 2011 03:44:49 -0800 (PST) MIME-Version: 1.0 Received: by 10.216.136.6 with SMTP id v6mr1618453wei.78.1321789489620; Sun, 20 Nov 2011 03:44:49 -0800 (PST) Received: by 10.180.85.102 with HTTP; Sun, 20 Nov 2011 03:44:49 -0800 (PST) X-Originating-IP: [212.106.243.49] Date: Sun, 20 Nov 2011 12:44:49 +0100 Message-ID: From: Antonio Vieiro To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Subject: What happens with lang/gnustep-base in FreeBSD 9? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 11:44:51 -0000 Hi all, I'm currently running the 9.0 RC1 version of FreeBSD and the lang/gnustep-base cannot be installed: it says I need an Objective C compiler but I actually do: clang version 3.0 is an Objective-C compiler too. So what's wrong here? Are there any license issues or something? Thanks, Antonio P.S.: Technical details antonio:/usr/ports/lang/gnustep-base# make ===> gnustep-base-1.19.3_5 needs an objective C compiler. *** Error code 1 Stop in /usr/ports/lang/gnustep-base. antonio:/usr/ports/lang/gnustep-base# clang --version FreeBSD clang version 3.0 (trunk 135360) 20110717 Target: i386-unknown-freebsd9.0 Thread model: posix From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 11:53:13 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F0D321065670 for ; Sun, 20 Nov 2011 11:53:12 +0000 (UTC) (envelope-from kes-kes@yandex.ru) Received: from forward17.mail.yandex.net (forward17.mail.yandex.net [IPv6:2a02:6b8:0:1402::2]) by mx1.freebsd.org (Postfix) with ESMTP id 1774D8FC08 for ; Sun, 20 Nov 2011 11:53:12 +0000 (UTC) Received: from smtp18.mail.yandex.net (smtp18.mail.yandex.net [95.108.252.18]) by forward17.mail.yandex.net (Yandex) with ESMTP id 4ECEF1062565 for ; Sun, 20 Nov 2011 15:53:07 +0400 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yandex.ru; s=mail; t=1321789987; bh=bSWgbZgOH5mOMDhnvgeePMF3yCyqBYh0zf7ROgZ6KL0=; h=Date:From:Reply-To:Message-ID:To:Subject:MIME-Version: Content-Type:Content-Transfer-Encoding; b=EA5WmGk83ZHGw0W6eVXU+Y6R/7Rh0DtgKOSIbhAhf9vbX7UzxTQmxc+wYNqEvohIX UovbZ4/+xaaesWwmJGExKG0bmpPisvwLhGu100JglhquccjZic6/Tov4F2lPEMKOnu KDLlyz0m4RwJXIJVBNjMrntTb30gRRhVkRjE59jE= Received: from smtp18.mail.yandex.net (localhost [127.0.0.1]) by smtp18.mail.yandex.net (Yandex) with ESMTP id 2D2DE18A003D for ; Sun, 20 Nov 2011 15:53:07 +0400 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yandex.ru; s=mail; t=1321789987; bh=bSWgbZgOH5mOMDhnvgeePMF3yCyqBYh0zf7ROgZ6KL0=; h=Date:From:Reply-To:Message-ID:To:Subject:MIME-Version: Content-Type:Content-Transfer-Encoding; b=EA5WmGk83ZHGw0W6eVXU+Y6R/7Rh0DtgKOSIbhAhf9vbX7UzxTQmxc+wYNqEvohIX UovbZ4/+xaaesWwmJGExKG0bmpPisvwLhGu100JglhquccjZic6/Tov4F2lPEMKOnu KDLlyz0m4RwJXIJVBNjMrntTb30gRRhVkRjE59jE= Received: from unknown (unknown [77.93.52.20]) by smtp18.mail.yandex.net (nwsmtp/Yandex) with ESMTP id r4EuHwKv-r6EOUOK6; Sun, 20 Nov 2011 15:53:06 +0400 X-Yandex-Spam: 1 Date: Sun, 20 Nov 2011 13:53:02 +0200 From: =?windows-1251?B?yu7t/Oru4iDF4uPl7ejp?= X-Mailer: The Bat! (v4.0.24) Professional Organization: =?windows-1251?B?188gyu7t/Oru4iwgRnJlZUxpbmU=?= X-Priority: 3 (Normal) Message-ID: <1756721337.20111120135302@yandex.ru> To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=windows-1251 Content-Transfer-Encoding: 8bit Subject: Interrupts statistic differ X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: =?windows-1251?B?yu7t/Oru4iDF4uPl7ejp?= List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 11:53:13 -0000 Hi Why statistic for total interrupts are differ? 38178 total in case of 'systat -v' 33309 Total in case of 'vmstat -i' # systat -v 1 users Load 1.78 1.76 1.86 Nov 20 13:48 Mem:KB REAL VIRTUAL VN PAGER SWAP PAGER Tot Share Tot Share Free in out in out Act 703196 14508 2285528 19332 1041760 count 19 All 878044 23120 4494188 64368 pages 20 Proc: Interrupts r p d s w Csw Trp Sys Int Sof Flt 463 cow 38178 total 2 149 201k 9402 37k 21k 30k 3187 1778 zfod 22 ata0 14 93 ozfod 1 ehci0 16 11.9%Sys 27.8%Intr 7.3%User 0.0%Nice 53.0%Idle 5%ozfod 2 ehci1 23 | | | | | | | | | | | daefr 4128 cpu0:timer ======++++++++++++++>>>> 1129 prcfr 21641 re0 256 115 dtbuf 2374 totfr 4128 cpu1:timer Namei Name-cache Dir-cache 142271 desvn react 4128 cpu3:timer Calls hits % hits % 92587 numvn pdwak 4128 cpu2:timer 45539 45539 100 35556 frevn pdpgs intrn Disks ad0 da0 pass0 287660 wire KB/t 19.37 0.00 0.00 275972 act tps 22 0 0 2386196 inact MB/s 0.42 0.00 0.00 244 cache %busy 2 0 0 1041516 free # vmstat -i interrupt total rate irq14: ata0 1393012 7 irq16: ehci0 299862 1 irq23: ehci1 442436 2 cpu0:timer 775750767 4122 irq256: re0 3196247374 16986 cpu1:timer 769445708 4089 cpu3:timer 752495866 3999 cpu2:timer 771600218 4100 Total 6267675243 33309 -- Ñ óâàæåíèåì, Êîíüêîâ mailto:kes-kes@yandex.ru From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 12:01:06 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7B9831065679 for ; Sun, 20 Nov 2011 12:01:06 +0000 (UTC) (envelope-from admin@vizion2000.net) Received: from dns1.vizion2000.net (dns1.vizion2000.net [62.49.197.50]) by mx1.freebsd.org (Postfix) with ESMTP id EFB138FC2A for ; Sun, 20 Nov 2011 12:01:05 +0000 (UTC) Received: by dns1.vizion2000.net (Postfix, from userid 1004) id BE243119C54; Sun, 20 Nov 2011 02:43:51 -0800 (PST) From: David Southwell Organization: Vizion Communications To: freebsd-questions@freebsd.org Date: Sun, 20 Nov 2011 02:43:51 -0800 User-Agent: KMail/1.13.7 (FreeBSD/8.2-RELEASE; KDE/4.7.3; amd64; ; ) References: <201111190050.05726.admin@vizion2000.net> <201111200133.54033.david@vizion2000.net> <201111200158.08181.david@vizion2000.net> In-Reply-To: <201111200158.08181.david@vizion2000.net> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201111200243.51644.admin@vizion2000.net> Cc: perryh@pluto.rain.com Subject: Re: epson printers on amd64 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: david@vizion2000.net List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 12:01:06 -0000 On Sunday 20 November 2011 01:58:07 David Southwell wrote: > On Sunday 20 November 2011 01:33:53 David Southwell wrote: > > On Saturday 19 November 2011 21:27:42 Warren Block wrote: > > > On Sun, 20 Nov 2011, perryh@pluto.rain.com wrote: > > > > Warren Block wrote: > > > >> On Sat, 19 Nov 2011, David Southwell wrote: > > > >>> Anyone up to date on how to do high quality printing with > > > >>> epson inkjet printers (in my case r2400 and r2880) on amd64 > > > >>> systems. print/pips* reports they require 386 and do not > > > >>> compile on amd64. > > > >> > > > >> print/gimp-gutenprint works pretty well from Gimp, although > > > >> I have not figured out how to get consistent color and brightness. > > > >> It supports both of those printers. > > > > > > > > I'm sure I'm not alone in doubting that _any_ ink-spitter is likely > > > > to produce "high quality printing" or "consistent color and > > > > brightness", regardless of the host support used. Those printers > > > > are designed to be manufactured as inexpensively as possible so as > > > > to be sold at very low prices, the profit being in the recurring ink > > > > sales. "Cheap" and "high quality" tend to be incompatible design > > > > goals. > > > > > > (Sorry, I hadn't realized I was replying on -emulation, which is meant > > > for computer emulation. CCed to -questions on this reply.) > > > > > > Quality color photos are the one area where inkjets really can do a > > > good job. Experimenting with cheap Epson R200 and R280 has shown that > > > they can print better quality photos than local photo printing places. > > > > > > Color and brightness are consistent until I print a different photo. > > > Gutenprint saves the settings, it's just that they don't work > > > the same with different photos. Possibly this is due to my changing > > > the wrong adjustments. > > > > > > Oh, and I've only used Gutenprint on 32-bit systems so far. > > > > To get high quality printing with good inkjet printeres like r2400 and > > r2880 here are the main steps I follow: > > > > 1. Define the colour space (e.g adobe rgb 1998) to be used when the image > > is being captured. > > > > 2. Shoot using the correct white space setting for the scene. > > > > 3. Load onto the computer having first profiled your monitor. > > > > 4. Use your preferred editing software (e.g. photoshop) using a defined > > working space colour profile e.g. adobe 1998 (I prefer prophoto which is > > 32bit floating decimal point). > > > > 5. Convert the colour profile of the image to the working colour space. > > > > 6. Process the image. > > > > 7. When processing complete choose the paper for printing. > > > > 8. Make sure you have a suitable colour profile for that paper for your > > chosen printer. > > > > 9. Print using the appropriate paper profile. > > Sorry I should have mentioned that ghostscript are integrating colour > profiling using icc profiles although the last time I checked there was no > support for the kind of monitor profile creation devices such as those > manufactured by datacolor which I use on I hate to say it MS$ systems. > There is an interesting paper on Ghostscript Color Management to be found > on www.artifex.com/Ghostscript_Color_Architecture.pdf > OK thanks to you guys asking some questions I have found that graphics/lprof-devel can support the creation of monitor and print profiles using Spyder 2 & Spyder 3 from datacolor. I have been a bit lazy in following up my earlier interest in profiling monitors on freebsd 7.2 & 8.2 as I would like to reduce my reliance on MS$ and apple systems. It looks like I missed this one which is being compiled as I speak. I will try forcing a compile of the 32bit code for the epson r2400 & r2880 which I am told may compile on 64bit given some work. I will report back if I finish up with a viable system. David From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 12:08:26 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BFA86106566C; Sun, 20 Nov 2011 12:08:26 +0000 (UTC) (envelope-from naylor.b.david@gmail.com) Received: from mail-ww0-f42.google.com (mail-ww0-f42.google.com [74.125.82.42]) by mx1.freebsd.org (Postfix) with ESMTP id 1FC618FC0A; Sun, 20 Nov 2011 12:08:25 +0000 (UTC) Received: by wwe3 with SMTP id 3so3864360wwe.1 for ; Sun, 20 Nov 2011 04:08:25 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type :content-transfer-encoding:message-id; bh=oLFJKVImX3jcqp/hUpbR+N9Yn1UYHOC540uL6skzA4Y=; b=UBHelIoMlI+e3A5r04Kdxg3cR2DYwohxhtd6KhO6FYCUmgHLeVIjSc45gVDSrsYOWw A7qa6Qqb9OU3U9qmy5A0YJVPX0bhdZ/6papIPn9e/6uQq/+fEEE1Z+yGPzJi6niD5SJg +h/6RtIqriB3K9jB4JpcWZFyQYT6DbAPMrLzQ= Received: by 10.216.133.12 with SMTP id p12mr1374322wei.99.1321790904914; Sun, 20 Nov 2011 04:08:24 -0800 (PST) Received: from dragon.dg (41-132-93-69.dsl.mweb.co.za. [41.132.93.69]) by mx.google.com with ESMTPS id m25sm8512001wbp.6.2011.11.20.04.08.22 (version=TLSv1/SSLv3 cipher=OTHER); Sun, 20 Nov 2011 04:08:24 -0800 (PST) From: David Naylor To: freebsd-emulation@freebsd.org, freebsd-questions@freebsd.org Date: Sun, 20 Nov 2011 14:08:51 +0200 User-Agent: KMail/1.13.7 (FreeBSD/9.0-RC2; KDE/4.7.1; amd64; ; ) MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart15372081.GRjRsnDeFR"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <201111201408.55611.naylor.b.david@gmail.com> Cc: Subject: Wine-fbsd64 updated to 1.3.33 (32bit Wine for 64bit FreeBSD) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 12:08:26 -0000 --nextPart15372081.GRjRsnDeFR Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi, Packages [1] for wine-fbsd64-1.3.33 have been uploaded to mediafire [2]. =20 There are many reports that wine does not work with a clang compiled world= =20 (help in fixing this problem is appreciated as it affects quite a few users= ). =20 The patch [3] for nVidia users is now included in the package and is run on= =20 installation (if the relevant files are accessable). Please read the=20 installation messages for further information. =20 Regards, David [1]=20 MD5 (freebsd8/wine-fbsd64-1.3.33,1.tbz) =3D a3eb5e2b32b8c7fa91e67aecee1cc= 197 MD5 (freebsd9/wine-fbsd64-1.3.33,1.txz) =3D 0a1b483fc8ee107653586aa56d464= 814 [2] http://www.mediafire.com/wine_fbsd64 [3] The patch is located at /usr/local/share/wine/patch-nvidia.sh --nextPart15372081.GRjRsnDeFR Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (FreeBSD) iEYEABECAAYFAk7I7dcACgkQUaaFgP9pFrIW9gCeMbHMMbw3/+C4RCG+H6a+fY/y GwoAn04eLkMDzwb9nDMN5YrcVsgsQyAI =DbKO -----END PGP SIGNATURE----- --nextPart15372081.GRjRsnDeFR-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 13:13:52 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B1347106564A for ; Sun, 20 Nov 2011 13:13:52 +0000 (UTC) (envelope-from darcsis@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id 768578FC0C for ; Sun, 20 Nov 2011 13:13:52 +0000 (UTC) Received: by iakl21 with SMTP id l21so8811917iak.13 for ; Sun, 20 Nov 2011 05:13:51 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:to:cc:subject:in-reply-to:organization:references:user-agent :x-envelope-to:mail-followup-to:date:message-id:mime-version :content-type; bh=mp7OcVnRscG2n+QzwzcGdv+hr8SAfqPifjNxH7lu1Tg=; b=KM40450Be1v6pxQ6IfpMwfTRdOU/p5ITQdmor6UyO0KwAPjrmypj4XTAR0TZBBLq3W DLGJ/549NB5Vkf8rKOatHyqsqvmFqtxrPsofTbdOqcz2xyNthjriwlQtICMUjz/MZaid Q2IXYnTtdYHqtpj9DF6UVprYmPDWtxxLzRFis= Received: by 10.50.197.167 with SMTP id iv7mr10421129igc.46.1321794831739; Sun, 20 Nov 2011 05:13:51 -0800 (PST) Received: from localhost ([123.117.57.214]) by mx.google.com with ESMTPS id ft1sm18171531igc.3.2011.11.20.05.13.45 (version=TLSv1/SSLv3 cipher=OTHER); Sun, 20 Nov 2011 05:13:50 -0800 (PST) From: darcsis@gmail.com (Denise H. G.) To: "Thomas Mueller" In-Reply-To: <4ec8e3b0.8127440a.0cc5.6f9eSMTPIN_ADDED@mx.google.com> (Thomas Mueller's message of "Sun, 20 Nov 2011 11:25:35 +0000 (GMT)") Organization: Pluto The Planet References: <87zkfsca5a.fsf@pluton.xbsd.name> <4ec8e3b0.8127440a.0cc5.6f9eSMTPIN_ADDED@mx.google.com> User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/23.3 (berkeley-unix) X-Envelope-To: mueller6727@bellsouth.net Mail-Followup-To: "Thomas Mueller" , freebsd-questions@freebsd.org Date: Sun, 20 Nov 2011 21:13:40 +0800 Message-ID: <87mxbrdji3.fsf@pluton.xbsd.name> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: file system on 9.0 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 13:13:52 -0000 On 2011/11/20 at 19:25, "Thomas Mueller" wrote: > > from darcsis@gmail.com (Denise H. G.): >> I strongly advise that /usr and /usr/local reside on different >> partitions. Furthermore, If you plan to run a desktop environment, >> your /usr/local should be big enough, say 8G - 10G, to hold all >> stuff you built from the ports. And putting /var on a separate >> partitiion is a good idea, I think. > >> You can find detailed information on how to lay out and size your >> partitions in tuning(7) either locally or online. > > The one directory I really want to put on a separate partition is > /home . That way, you can fully rebuild/redo your system and keep user > data. > Yes. I always put /home on a separate partition. Actually, my /home is on a ZFS partition which is of more scalability and easier snapshots. > I don't like to put /var on a separate partition because of the danger > of running short of space. I had nervous moments when running > freebsd-update on the older computer and seeing the used part of /var > grow. I always size /var to 2G or 3G, which is typical for me. I seldom run freebsd-update, but upgrade from sources instead. I only encountered problems with Xorg that crashed filling up /var with core dumps... > > I don't really see a need to put /usr/local on a separate partition, > though conceivably you could build applications with both FreeBSD > ports and NetBSD pkgsrc, but keep these separate. NetBSD pkgsrc has > been ported to other (quasi-)Unixes including FreeBSD. Default > directory corresponding to FreeBSD's /usr/local is /usr/pkg . > It is long before I started thinking of joining /usr and /usr/local into one partition. However, my current installation dates back to FreeBSD 6 or 7. Many things changed exept the filesystem layout. > I think I like FreeBSD ports better than NetBSD pkgsrc, the latter > which I used only with NetBSD. > > I originally installed FreeBSD 9.0-BETA1 using bsdinstall on the USB > stick, including the ports. > > There was a conflict when I ran "portsnap fetch update", that didn't > work. I had to run "portsnap fetch" and "portsnap extract", scrapping > the ports tree from bsdinstall in favor of the fresh ports tree. So > now I know best to not install ports tree from bsdinstall; this would > presumably apply for sysinstall too. I guess 'portsnap fetch update' is run only after the ports tree is there. For a fresh install of the ports tree, 'portsnap fetch extract' is the correct way. For me, I only pull the ports tree with 'portsnap'. That way, I can complete a fresh install of FreeBSD in less than 20 minutes. > > Tom > > > -- If you've got them by the balls, their hearts and minds will follow. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 13:17:15 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3E060106566C for ; Sun, 20 Nov 2011 13:17:15 +0000 (UTC) (envelope-from levitch@iglou.com) Received: from rdsmtp.iglou.com (rdsmtp.iglou.com [192.107.41.63]) by mx1.freebsd.org (Postfix) with ESMTP id CD83E8FC0C for ; Sun, 20 Nov 2011 13:17:14 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=iglou.com; s=alpha; h=Content-Type:MIME-Version:Message-ID:Subject:To:From:Date; bh=6rPH2KAY1oHdfGkTmELyXAQX9PegS0KXLz0FuTV68dM=; b=Qrrn1BBbdTLoJ2BIep9tk2XiJzce+rui/GV8Ms5wiV6aGbnBJXDP3CphXYk28sx0hFo88Y6zF7RGWyVz833ZFCnOu92/drSNfZR7FnBzcfopNw+sWHqWUlK1Mp15tIRoIQii53r6rRrYvQ/Z4Jnvb52AJBnYBZtJi3BRSqd6ClA=; Received: from iglou3.iglou.com ([192.107.41.6]:57818 helo=mail.iglou.com) by rdsmtp.iglou.com with esmtpa (Exim MTA/8.19.3) (envelope-from ) id 1RS6pF-00055V-94 by authid with igloumta_auth for questions@freebsd.org; Sun, 20 Nov 2011 07:48:49 -0500 Received: from shell1.iglou.com ([192.107.41.17]:56978 helo=shell1) by mail.iglou.com with esmtps (TLS cipher TLSv1:AES256-SHA:256) (Exim MTA/8.19.3) (envelope-from ) id 1RS6pE-0003bx-Up for questions@freebsd.org; Sun, 20 Nov 2011 07:48:49 -0500 Date: Sun, 20 Nov 2011 07:48:48 -0500 (EST) From: Darrel X-X-Sender: levitch@shell1 To: questions@freebsd.org Message-ID: User-Agent: Alpine 2.00 (GSO 1167 2008-08-23) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII X-Originating-IP: 192.107.41.17 X-IgLou-Customer: 3cb6f76205bd20f518810676a67a982b Cc: Subject: journal timestamp fsck error amd64 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 13:17:15 -0000 Hello, An amd64 running fbsd9-RC1 was shutdown overnight from the 'shutdown -p' command. It reported an unclean shutdown and I ran 'fsck -y'. Still it will not boot and the message is "Journal timestamp does not match fs mount time". This is occurring for both /var and /usr. How can I fix this? Thanks, Darrel From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 13:27:55 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 83F2A1065670 for ; Sun, 20 Nov 2011 13:27:55 +0000 (UTC) (envelope-from levitch@iglou.com) Received: from rdsmtp.iglou.com (rdsmtp.iglou.com [192.107.41.63]) by mx1.freebsd.org (Postfix) with ESMTP id 1C3E08FC12 for ; Sun, 20 Nov 2011 13:27:55 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=iglou.com; s=alpha; h=Content-Type:MIME-Version:Message-ID:Subject:To:From:Date; bh=PFoECetJpESF1RUFtDZH6ZL8m0ZeWWUcCXcp1cxE4wU=; b=b0ZXcC9lsc8/NxD21WOKaq8znrbkUJrwY3hlL+jCOQB/eDWVXMDXaHUjPLWRlK5dGMiOEoOGLGZRxeWJYnTKegebe/uyTEoXPlaA7tCdUgQsKgB/YL06ILT4vv78Eg7IC+kbWgu/BIJ195JcUrTLCgf67567CHMivPTJ471w7yI=; Received: from iglou3.iglou.com ([192.107.41.6]:58885 helo=mail.iglou.com) by rdsmtp.iglou.com with esmtpa (Exim MTA/8.19.3) (envelope-from ) id 1RS6zJ-0005XA-TY by authid with igloumta_auth for freebsd-questions@freebsd.org; Sun, 20 Nov 2011 07:59:13 -0500 Received: from shell1.iglou.com ([192.107.41.17]:57029 helo=shell1) by mail.iglou.com with esmtps (TLS cipher TLSv1:AES256-SHA:256) (Exim MTA/8.19.3) (envelope-from ) id 1RS6zJ-00046A-KS for freebsd-questions@freebsd.org; Sun, 20 Nov 2011 07:59:13 -0500 Date: Sun, 20 Nov 2011 07:59:13 -0500 (EST) From: Darrel X-X-Sender: levitch@shell1 To: freebsd-questions@freebsd.org Message-ID: User-Agent: Alpine 2.00 (GSO 1167 2008-08-23) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII X-Originating-IP: 192.107.41.17 X-IgLou-Customer: 3cb6f76205bd20f518810676a67a982b Subject: journal timestamp fsck error amd64 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 13:27:55 -0000 Hello, An amd64 running fbsd9-RC1 was shutdown overnight from the 'shutdown -p now' command. It reported an unclean shutdown and I ran 'fsck -y'. Still it will not boot and the message is "Journal timestamp does not match fs mount time". This is occurring for both /var and /usr. How can I fix this? Thanks, Darrel From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 14:14:40 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BEBA6106564A for ; Sun, 20 Nov 2011 14:14:40 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from mx02.qsc.de (mx02.qsc.de [213.148.130.14]) by mx1.freebsd.org (Postfix) with ESMTP id 48C6B8FC0A for ; Sun, 20 Nov 2011 14:14:39 +0000 (UTC) Received: from r56.edvax.de (port-92-195-104-16.dynamic.qsc.de [92.195.104.16]) by mx02.qsc.de (Postfix) with ESMTP id DC6641D923; Sun, 20 Nov 2011 15:14:37 +0100 (CET) Received: from r56.edvax.de (localhost [127.0.0.1]) by r56.edvax.de (8.14.5/8.14.5) with SMTP id pAKEEb6H003681; Sun, 20 Nov 2011 15:14:37 +0100 (CET) (envelope-from freebsd@edvax.de) Date: Sun, 20 Nov 2011 15:14:37 +0100 From: Polytropon To: thanos trompoukis Message-Id: <20111120151437.cf3a198a.freebsd@edvax.de> In-Reply-To: References: Organization: EDVAX X-Mailer: Sylpheed 3.1.1 (GTK+ 2.24.5; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: The results of your email commands X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Polytropon List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 14:14:40 -0000 On Sun, 20 Nov 2011 13:17:23 +0200, thanos trompoukis wrote: > I saw that the usb device is like a scsi "da" > so now I am trying this: > # mount -t msdosfs /dev/da0 /mnt/usb > mount_msdosfs: /dev/da0: Invalid argument > now what? how I have to refered on my usb device? > I do not understand a word here....! Depending on he partitioning of the USB media, it's possible to access /dev/da0s1 instead of /dev/da0. The command # fdisk da0 lists the partitioning information. According to the example above, you can # mount -t msdosfs /dev/da0s1 /mnt/usb There is a section in the FreeBSD Handbook discussing the topic of how to access MS-DOS formatted media per USB. -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 14:48:35 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 93599106564A for ; Sun, 20 Nov 2011 14:48:35 +0000 (UTC) (envelope-from tomc@bio.umass.edu) Received: from marlin.bio.umass.edu (marlin.bio.umass.edu [128.119.55.19]) by mx1.freebsd.org (Postfix) with ESMTP id 453C28FC18 for ; Sun, 20 Nov 2011 14:48:35 +0000 (UTC) Received: from [192.168.1.2] (24-177-32-218.dhcp.oxfr.ma.charter.com [24.177.32.218]) (authenticated bits=0) by marlin.bio.umass.edu (8.14.4/8.14.4) with ESMTP id pAKEmUtq001288 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Sun, 20 Nov 2011 09:48:34 -0500 (EST) Message-ID: <4EC9133E.9000209@bio.umass.edu> Date: Sun, 20 Nov 2011 09:48:30 -0500 From: Tom Carpenter User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.23) Gecko/20110922 Thunderbird/3.1.15 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <005301cca2b7$add11f20$09735d60$@co.ke> <4EC13877.3070704@bio.umass.edu> <4EC6BC2F.5030907@bio.umass.edu> <4EC6C506.2090206@infracaninophile.co.uk> <4EC8AE3A.8000600@infracaninophile.co.uk> In-Reply-To: <4EC8AE3A.8000600@infracaninophile.co.uk> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Greylist: Sender succeeded SMTP AUTH, not delayed by milter-greylist-4.2.6 (marlin.bio.umass.edu [128.119.55.19]); Sun, 20 Nov 2011 09:48:34 -0500 (EST) X-Scanned-By: MIMEDefang 2.68 on 128.119.55.19 Subject: Re: 8.2-RELEASE-p4 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 14:48:35 -0000 If I'm the OP (original poster ?) I'm running GENERIC, and 'uname -a' output has remained '8.2-RELEASE-p4' despite running 'freebsd-update fetch', 'freebsd-update install', and then rebooting the system, over the past couple of weeks. I did download the source, ran 'freebsd-update fetch' and 'freebsd-update install' to update the source, then compiled a new kernel using the GENERIC config file, rebooted, and now 'uname -a' output shows the '-p4' version number, but I was trying to avoid compiling kernels. -Tom Carpenter On 11/20/2011 02:37 AM, Matthew Seaman wrote: > On 19/11/2011 23:26, Robert Simmons wrote: >> On Fri, Nov 18, 2011 at 3:50 PM, Matthew Seaman >> wrote: >>> If you compile your own kernel, then freebsd-update will patch the >>> kernel sources, but leave you to rebuild and reinstall your customized >>> kernel. >>> >>> I don't know about the -p4 update. By rights it should have involved >>> updating the kernel by one or other of the two methods shown. So far >>> however, we've seen two reports questioning that[*] and none saying that >>> the -p4 update did in fact update the kernel. Which is suspicious, but >>> hardly conclusive. >> Do you compile your own kernel, or do you have a machine that uses >> GENERIC? If you do, what is the output of uname -a on it? > Me personally? No, in general I track -STABLE on my systems. Try > asking the OP. > > Matthew From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 14:58:48 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 25A68106564A for ; Sun, 20 Nov 2011 14:58:48 +0000 (UTC) (envelope-from bonomi@mail.r-bonomi.com) Received: from mail.r-bonomi.com (mx-out.r-bonomi.com [204.87.227.120]) by mx1.freebsd.org (Postfix) with ESMTP id E2B248FC13 for ; Sun, 20 Nov 2011 14:58:47 +0000 (UTC) Received: (from bonomi@localhost) by mail.r-bonomi.com (8.14.4/rdb1) id pAKExuXU074267; Sun, 20 Nov 2011 08:59:56 -0600 (CST) Date: Sun, 20 Nov 2011 08:59:56 -0600 (CST) From: Robert Bonomi Message-Id: <201111201459.pAKExuXU074267@mail.r-bonomi.com> To: atr0x23@gmail.com, freebsd-questions@freebsd.org In-Reply-To: Cc: Subject: Re: The results of your email commands X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 14:58:48 -0000 > From owner-freebsd-questions@freebsd.org Sun Nov 20 05:44:42 2011 > Date: Sun, 20 Nov 2011 13:17:23 +0200 > From: thanos trompoukis > To: freebsd-questions@freebsd.org > Subject: Re: The results of your email commands > > I saw that the usb device is like a scsi "da" > so now I am trying this: > # mount -t msdosfs /dev/da0 /mnt/usb > mount_msdosfs: /dev/da0: Invalid argument > now what? how I have to refered on my usb device? > I do not understand a word here....! The following is a 'catch *everything*' approch. There are "less-drastic" ways, bud you don't provide enough information to determine what short-cuts are possible. *FIRST* _shut_down_ the machine. Next, remove the USB device. Now, turn on the machine and boot into FreeBSD. Do an 'ls -l' of the /dev directory. save the output to a file in your home directory. Plug in the USB device. Did you get system log and/or console messages about a new USB device? (if not, you may be missing USB device suport from the kernel0 Again, do an 'ls -l' of the /dev directoy. Save the output to a *differnt* file in your home directory. Look for device entries that are mentioned in _this_ list, that are *not* in the list you got when the USB device was not connected. *THOSE* are the possible devices for the 'mount' command you are trying. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 16:21:52 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5BAEA1065670 for ; Sun, 20 Nov 2011 16:21:52 +0000 (UTC) (envelope-from jerrymc@gizmo.acns.msu.edu) Received: from gizmo.acns.msu.edu (gizmo.acns.msu.edu [35.8.1.43]) by mx1.freebsd.org (Postfix) with ESMTP id 08CDD8FC0A for ; Sun, 20 Nov 2011 16:21:51 +0000 (UTC) Received: from gizmo.acns.msu.edu (localhost [127.0.0.1]) by gizmo.acns.msu.edu (8.13.6/8.13.6) with ESMTP id pAKGHqdG024809; Sun, 20 Nov 2011 11:17:52 -0500 (EST) (envelope-from jerrymc@gizmo.acns.msu.edu) Received: (from jerrymc@localhost) by gizmo.acns.msu.edu (8.13.6/8.13.6/Submit) id pAKGHqOQ024808; Sun, 20 Nov 2011 11:17:52 -0500 (EST) (envelope-from jerrymc) Date: Sun, 20 Nov 2011 11:17:52 -0500 From: Jerry McAllister To: Thomas Mueller Message-ID: <20111120161752.GB24745@gizmo.acns.msu.edu> References: <87zkfsca5a.fsf@pluton.xbsd.name> <20111120112536.45961106566B@hub.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20111120112536.45961106566B@hub.freebsd.org> User-Agent: Mutt/1.4.2.2i Cc: "Denise H. G." , freebsd-questions@freebsd.org Subject: Re: file system on 9.0 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 16:21:52 -0000 On Sun, Nov 20, 2011 at 11:25:35AM +0000, Thomas Mueller wrote: > from darcsis@gmail.com (Denise H. G.): > > > I strongly advise that /usr and /usr/local reside on different > > partitions. Furthermore, If you plan to run a desktop environment, your > > /usr/local should be big enough, say 8G - 10G, to hold all stuff you > > built from the ports. And putting /var on a separate partitiion is a > > good idea, I think. > > > I don't like to put /var on a separate partition because of the danger > of running short of space. I had nervous moments when running > freebsd-update on the older computer and seeing the used part of /var grow. For that very reason, I put /var on a separate partition. Stuff being written to /var is most likely to over run stuff and trash a / partition. ////jerry > > I don't really see a need to put /usr/local on a separate partition, though conceivably you could build applications with both FreeBSD ports and NetBSD pkgsrc, but keep these separate. NetBSD pkgsrc has been ported to other (quasi-)Unixes including FreeBSD. Default directory corresponding to FreeBSD's /usr/local is /usr/pkg . > > I think I like FreeBSD ports better than NetBSD pkgsrc, the latter which I used only with NetBSD. > > I originally installed FreeBSD 9.0-BETA1 using bsdinstall on the USB stick, including the ports. > > There was a conflict when I ran "portsnap fetch update", that didn't work. I had to run "portsnap fetch" and "portsnap extract", scrapping the ports tree from bsdinstall in favor of the fresh ports tree. So now I know best to not install ports tree from bsdinstall; this would presumably apply for sysinstall too. > > Tom > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 17:05:31 2011 Return-Path: Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 93C65106566B; Sun, 20 Nov 2011 17:05:31 +0000 (UTC) (envelope-from yppetrov@gmail.com) Received: from mail-gx0-f182.google.com (mail-gx0-f182.google.com [209.85.161.182]) by mx1.freebsd.org (Postfix) with ESMTP id 474FE8FC08; Sun, 20 Nov 2011 17:05:31 +0000 (UTC) Received: by ggnk5 with SMTP id k5so5204738ggn.13 for ; Sun, 20 Nov 2011 09:05:30 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; bh=YMOqedVHfuStPyJ0A4GyQWckcpsPrEAuZseaFsJx3J8=; b=qbhyCBr+jBH7Bu0xkKpHppQsp4dkMhGLb0Zppt2I5HMd2ys5jj1HmXhamd440HdGpI 9zC9KX2ml1LLTvSJJa3PvTZoYDzuTsMPbseG2vkSCWhjOYLjjMGItukgSss/3AjXiKZF SPjdaIviyIyEIThUgmBjcIn4ey/mXsOH/+vt8= MIME-Version: 1.0 Received: by 10.236.22.164 with SMTP id t24mr15003876yht.67.1321807241062; Sun, 20 Nov 2011 08:40:41 -0800 (PST) Received: by 10.101.129.13 with HTTP; Sun, 20 Nov 2011 08:40:41 -0800 (PST) Date: Sun, 20 Nov 2011 18:40:41 +0200 Message-ID: From: Yordan Petrov To: freebsd-questions@FreeBSD.org, freebsd-doc@FreeBSD.org X-Mailman-Approved-At: Sun, 20 Nov 2011 17:10:13 +0000 Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Compiler X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 17:05:31 -0000 Hi How could I compile some cgi files for FreeBSD Is there any online tool ? From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 17:16:17 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4C5CC1065678 for ; Sun, 20 Nov 2011 17:16:17 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from mx02.qsc.de (mx02.qsc.de [213.148.130.14]) by mx1.freebsd.org (Postfix) with ESMTP id 10FD48FC0C for ; Sun, 20 Nov 2011 17:16:16 +0000 (UTC) Received: from r56.edvax.de (port-92-195-104-16.dynamic.qsc.de [92.195.104.16]) by mx02.qsc.de (Postfix) with ESMTP id 837D31E9EF; Sun, 20 Nov 2011 18:16:15 +0100 (CET) Received: from r56.edvax.de (localhost [127.0.0.1]) by r56.edvax.de (8.14.5/8.14.5) with SMTP id pAKHGEUU004804; Sun, 20 Nov 2011 18:16:14 +0100 (CET) (envelope-from freebsd@edvax.de) Date: Sun, 20 Nov 2011 18:16:14 +0100 From: Polytropon To: Yordan Petrov Message-Id: <20111120181614.39220bde.freebsd@edvax.de> In-Reply-To: References: Organization: EDVAX X-Mailer: Sylpheed 3.1.1 (GTK+ 2.24.5; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Compiler X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Polytropon List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 17:16:17 -0000 On Sun, 20 Nov 2011 18:40:41 +0200, Yordan Petrov wrote: > Hi > How could I compile some cgi files for FreeBSD Depending on the source's programming language, you'd have to use the corresponding compiler. For interpreted CGI files, the web server needs to be configured accordingly. > Is there any online tool ? I'm not aware of one, but you could use scp to transfer the source files to the server, then use ssh to call the compiler needed (e. g. cc), and then put the results into the proper locations. You could automate this process by a Makefile. -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 17:55:43 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C01971065673 for ; Sun, 20 Nov 2011 17:55:43 +0000 (UTC) (envelope-from rpclark@tds.net) Received: from mail-gy0-f182.google.com (mail-gy0-f182.google.com [209.85.160.182]) by mx1.freebsd.org (Postfix) with ESMTP id 873658FC14 for ; Sun, 20 Nov 2011 17:55:43 +0000 (UTC) Received: by ghbg20 with SMTP id g20so2697822ghb.13 for ; Sun, 20 Nov 2011 09:55:42 -0800 (PST) Received: by 10.147.60.9 with SMTP id n9mr28615yak.2.1321809968761; Sun, 20 Nov 2011 09:26:08 -0800 (PST) Received: from x1.frogdoor.org (h69-130-64-26.kgldga.dsl.dynamic.tds.net. [69.130.64.26]) by mx.google.com with ESMTPS id l27sm21592298ani.21.2011.11.20.09.26.07 (version=SSLv3 cipher=OTHER); Sun, 20 Nov 2011 09:26:07 -0800 (PST) Date: Sun, 20 Nov 2011 12:26:31 -0500 From: Rob Clark To: freebsd-questions@freebsd.org Message-Id: <20111120122631.7461b383.rpclark@tds.net> X-Mailer: Sylpheed 3.1.0 (GTK+ 2.22.1; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: wireless help with wep authentication X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 17:55:43 -0000 Running fbsd 8.2R on a Dell C640 laptop. Using a pcmcia card with atheros. My 2wire wireless router comes setup default with wep open with wireless security enabled, i.e., needs the default passkey from the router. I cannot get the ifconfig line correct so as to authenticate this way, and have tried many different strings of text here. However, following the handbook, I turned off "enable security" (on the 2wire router) to test things, hence, using wep (not as authmode shared or authmode open) and it works using the following in /etc/rc.conf: wlans_ath0="wlan0" ifconfig_wlan0="ssid Mynetname DHCP" Mynetname is different -- of course. I can browse the web and ping with 0% packet loss. I have not delved into using a /etc/wpa_supplicant.conf yet, I was hoping i could get it done in rc.conf with ifconfig. I have tried many many things, for days on end for authenticating with the passkey from the router. Any help appreciated, I can provide further info and things I've tried -- most things in the handbook wireless section, minus wpa_supplicant.conf. Thanks In Advance, Rob From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 18:57:59 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 797A01065781 for ; Sun, 20 Nov 2011 18:57:59 +0000 (UTC) (envelope-from alexander.kapshuk@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 0D6B48FC18 for ; Sun, 20 Nov 2011 18:57:58 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so7586956bkb.13 for ; Sun, 20 Nov 2011 10:57:57 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject :content-type:content-transfer-encoding; bh=5Cs9SOI3Le4iUzn6TUsR9YOs4Kb2Pqz3g97h7E/mhXs=; b=U0NHUMbd576Hht0xk7kxZ1DfAigCxPiA2ksbE+7P/ST32Ode3NniJzAwyxCLIY+Qhi LDrDXZdoMk3Utw+ZUN6G9p55sOcXwKIlrlVGgnRUgnTlGY2VnyywDyVv7t5RLCc/9Kax IIXvxmpp172dUeVJvvS6wiBwu99ZjcH92xksM= Received: by 10.205.117.10 with SMTP id fk10mr11459080bkc.29.1321815477121; Sun, 20 Nov 2011 10:57:57 -0800 (PST) Received: from [192.168.1.2] (93-127-96-97.static.vega-ua.net. [93.127.96.97]) by mx.google.com with ESMTPS id i3sm13025417fah.11.2011.11.20.10.57.56 (version=SSLv3 cipher=OTHER); Sun, 20 Nov 2011 10:57:56 -0800 (PST) Message-ID: <4EC94DAE.6050707@gmail.com> Date: Sun, 20 Nov 2011 20:57:50 +0200 From: Alexander Kapshuk User-Agent: Mozilla/5.0 (X11; FreeBSD i386; rv:8.0) Gecko/20111112 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: re: freebsd-update upgrade -r 9.0-RC2: incorrect hash error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 18:57:59 -0000 when performing a binary upgrade from 9.0-RC1 to 9.0-RC2 by following the instructions found here: http://lists.freebsd.org/pipermail/freebsd-current/2011-November/029373.html i've had this error: Applying patches... done. Fetching 5612 files... gunzip: (stdin): unexpected end of file 137c71ff94c207e764b910e3b7dca9a4fe282e43104bdeb18af4377014033116 has incorrect hash. has anyone else has this error? what can be done to fix it? :; uname -a FreeBSD localhost 9.0-RC1 FreeBSD 9.0-RC1 #0: Tue Oct 18 18:30:38 UTC 2011 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 thanks. sasha kapshuk From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 19:53:25 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E54B61065670 for ; Sun, 20 Nov 2011 19:53:25 +0000 (UTC) (envelope-from web@umich.edu) Received: from hackers.mr.itd.umich.edu (smtp.mail.umich.edu [141.211.14.81]) by mx1.freebsd.org (Postfix) with ESMTP id A1A248FC14 for ; Sun, 20 Nov 2011 19:53:25 +0000 (UTC) Received: FROM itcom245.staff.itd.umich.edu (itcom245.staff.itd.umich.edu [141.213.135.249]) By hackers.mr.itd.umich.edu ID 4EC95AB4.DA9.2161 ; Authuser web; 20 Nov 2011 14:53:24 EST Date: Sun, 20 Nov 2011 14:53:23 -0500 From: William Bulley To: Matthew Seaman Message-ID: <20111120195323.GA17436@itcom245.staff.itd.umich.edu> Mail-Followup-To: Matthew Seaman , freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i Cc: freebsd-questions@freebsd.org Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 19:53:26 -0000 According to Matthew Seaman on Sun, 11/20/11 at 02:34: > > bsdtar(1) -- accept no substitutes. Well, actually, it's libarchive > which bsdtar is built on top of. It automatically recognizes most > compression formats and most types of data archive -- including a few > that you probably wouldn't have thought of in that context. Try running > it against a .iso CDRom image. When I ran "man tar" it gave me the bsdtar(1) man page - never much noticed that before... :-) Holy crap! I had no idea: freebsd% tar tvf FreeBSD-9.0-RC1-i386-dvd1.iso | wc -l tar: Ignoring out-of-order file @121dac0 (usr/sbin/chown) 75319296 < 447330304 tar: Ignoring out-of-order file @1285180 (usr/share/man/man3/getlogin_r.3.gz) 498898944 < 499906560 tar: Ignoring out-of-order file @1270640 (usr/share/man/man3/FD_CLR.3.gz) 499187712 < 499906560 tar: Ignoring out-of-order file @1270700 (usr/share/man/man3/FD_ISSET.3.gz) 499187712 < 499906560 tar: Ignoring out-of-order file @12707c0 (usr/share/man/man3/FD_SET.3.gz) 499187712 < 499906560 tar: Ignoring out-of-order file @1270880 (usr/share/man/man3/FD_ZERO.3.gz) 499187712 < 499906560 tar: Ignoring out-of-order file @12449c0 (usr/share/man/man5/malloc.conf.5.gz) 500283392 < 505104384 tar: Ignoring out-of-order file @12476c0 (usr/share/man/man8/inetd.8.gz) 505382912 < 506322944 tar: Ignoring out-of-order file @1241480 (usr/share/zoneinfo/Europe/Oslo) 521547776 < 521877504 tar: Ignoring out-of-order file @121d880 (usr/share/zoneinfo/Europe/Istanbul) 521633792 < 521877504 tar: Ignoring out-of-order file @12413c0 (usr/share/zoneinfo/Europe/Nicosia) 521676800 < 521877504 tar: Error exit delayed from previous errors. 17817 Everything is there and listed. Amazing! You learn something every day. :-) Regards, web... -- William Bulley Email: web@umich.edu 72 characters width template ----------------------------------------->| From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 19:56:33 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 679B2106566C for ; Sun, 20 Nov 2011 19:56:33 +0000 (UTC) (envelope-from web@umich.edu) Received: from tombraider.mr.itd.umich.edu (smtp.mail.umich.edu [141.211.12.86]) by mx1.freebsd.org (Postfix) with ESMTP id 23D3A8FC13 for ; Sun, 20 Nov 2011 19:56:31 +0000 (UTC) Received: FROM itcom245.staff.itd.umich.edu (itcom245.staff.itd.umich.edu [141.213.135.249]) By tombraider.mr.itd.umich.edu ID 4EC95B6F.27D84.32500 ; Authuser web; 20 Nov 2011 14:56:31 EST Date: Sun, 20 Nov 2011 14:56:30 -0500 From: William Bulley To: Thomas Mueller Message-ID: <20111120195630.GB17436@itcom245.staff.itd.umich.edu> Mail-Followup-To: Thomas Mueller , freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i Cc: freebsd-questions@freebsd.org Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 19:56:33 -0000 According to Thomas Mueller on Sun, 11/20/11 at 05:46: > > It looks like tar in extraction mode automatically recognizes xz > compression in the file to be extracted from. > > Section from the man page for tar in FreeBSD 9.0-RC1: > > -J, --xz > (c mode only) Compress the resulting archive with xz(1). In > extract or list modes, this option is ignored. Note that, unlike > other tar implementations, this implementation recognizes XZ com- > pression automatically when reading archives. You see? That just goes to show you... ;^) The above section is missing from my 8.2-STABLE platform tar(1) man page. The whole problem is my trying to "get there from here" - which was what started this thread... :-) Regards, web... -- William Bulley Email: web@umich.edu 72 characters width template ----------------------------------------->| From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 20:42:21 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6F3F61065672 for ; Sun, 20 Nov 2011 20:42:21 +0000 (UTC) (envelope-from onemda@gmail.com) Received: from mail-vw0-f54.google.com (mail-vw0-f54.google.com [209.85.212.54]) by mx1.freebsd.org (Postfix) with ESMTP id 282028FC16 for ; Sun, 20 Nov 2011 20:42:20 +0000 (UTC) Received: by vbbfa15 with SMTP id fa15so2825181vbb.13 for ; Sun, 20 Nov 2011 12:42:20 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=Qv9OgAqstKYryY9XeI++LDeunv9RyyeJDnG/LAIMEfA=; b=ggMgPvq2xt9rkIbmbTOeUDqFYa7h0lIQgAPsXTkOjs3MmI5oHOyoj3JdjqbaGO+I91 EaU04cflHKaZMpfUXDLsMbMqzl0z3j1zIvu4tW19WjPDQl19PLCJV4IgTZmy6aqW+Up0 kIkhwhMhXOhG8HTal6Tw2/6dj6GXs6eCbySF4= MIME-Version: 1.0 Received: by 10.52.34.211 with SMTP id b19mr12416448vdj.112.1321821740083; Sun, 20 Nov 2011 12:42:20 -0800 (PST) Received: by 10.52.101.132 with HTTP; Sun, 20 Nov 2011 12:42:20 -0800 (PST) In-Reply-To: <20111120122631.7461b383.rpclark@tds.net> References: <20111120122631.7461b383.rpclark@tds.net> Date: Sun, 20 Nov 2011 20:42:20 +0000 Message-ID: From: "Paul B. Mahol" To: Rob Clark Content-Type: text/plain; charset=ISO-8859-1 Cc: freebsd-questions@freebsd.org Subject: Re: wireless help with wep authentication X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 20:42:21 -0000 On 11/20/11, Rob Clark wrote: > Running fbsd 8.2R on a Dell C640 laptop. > Using a pcmcia card with atheros. > > My 2wire wireless router comes setup default with > wep open with wireless security enabled, i.e., needs > the default passkey from the router. I cannot get the > ifconfig line correct so as to authenticate this way, > and have tried many different strings of text here. > > However, following the handbook, I turned off "enable > security" (on the 2wire router) to test things, hence, > using wep (not as authmode shared or authmode open) > and it works using the following in /etc/rc.conf: > > wlans_ath0="wlan0" > ifconfig_wlan0="ssid Mynetname DHCP" > > Mynetname is different -- of course. > > I can browse the web and ping with 0% packet loss. > > I have not delved into using > a /etc/wpa_supplicant.conf yet, I was > hoping i could get it done in rc.conf with ifconfig. > > I have tried many many things, for days on end for > authenticating with the passkey from the router. > Any help appreciated, I can provide further info and > things I've tried -- most things in the handbook > wireless section, minus wpa_supplicant.conf. Should adding "nwkey key" to ifconfig_wlan0 line above be enough? Key may be in ascii or in hex (in which case it must start with 0x). As you should probably already know wep provides 0% security so having wep or open network gives you almost exactly same amount of security. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 20 22:55:32 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 66281106566C; Sun, 20 Nov 2011 22:55:32 +0000 (UTC) (envelope-from yuri@rawbw.com) Received: from shell0.rawbw.com (shell0.rawbw.com [198.144.192.45]) by mx1.freebsd.org (Postfix) with ESMTP id 510648FC0C; Sun, 20 Nov 2011 22:55:32 +0000 (UTC) Received: from eagle.yuri.org (stunnel@localhost [127.0.0.1]) (authenticated bits=0) by shell0.rawbw.com (8.14.4/8.14.4) with ESMTP id pAKMtV2B016381; Sun, 20 Nov 2011 14:55:31 -0800 (PST) (envelope-from yuri@rawbw.com) Message-ID: <4EC98563.7010206@rawbw.com> Date: Sun, 20 Nov 2011 14:55:31 -0800 From: Yuri User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:8.0) Gecko/20111117 Thunderbird/8.0 MIME-Version: 1.0 To: ports@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: sylvio@freebsd.org, FreeBSD Questions Subject: linphone-base conflicts with ortp and fails to install, it also fails to build: error: expected specifier-qualifier-list before 'UInt96' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Nov 2011 22:55:32 -0000 Hi, When I do portupgrade, I get this message (kdenetwork fails to update due to this): ===> linphone-base-3.2.1_1,1 conflicts with installed package(s): ^M ortp-0.13.0_1^M ^M They install files into the same place.^M You may want to stop build with Ctrl + C.^M ===> Vulnerability check disabled, database not found^M ===> License check disabled, port has not defined LICENSE^M ^M ===> linphone-base-3.2.1_1,1 conflicts with installed package(s): ^M ortp-0.13.0_1^M ^M They will not build together.^M Please remove them first with pkg_delete(1).^M When I follow instruction in UPDATING and run this command 'portmaster -o net/linphone-base ortp', I get this messages: In file included from ../include/mediastreamer2/msrtp.h:25, from msrtp.c:20: ../include/mediastreamer2/ice.h:60: error: expected specifier-qualifier-list before 'UInt96' msrtp.c: In function 'receiver_process': msrtp.c:333: warning: implicit declaration of function 'rtp_get_payload' gmake[5]: *** [msrtp.lo] Error 1 gmake[5]: Leaving directory `/usr/ports/net/linphone-base/work/linphone-3.2.1/mediastreamer2/src' gmake[4]: *** [all] Error 2 gmake[4]: Leaving directory `/usr/ports/net/linphone-base/work/linphone-3.2.1/mediastreamer2/src' gmake[3]: *** [all-recursive] Error 1 gmake[3]: Leaving directory `/usr/ports/net/linphone-base/work/linphone-3.2.1/mediastreamer2' gmake[2]: *** [all] Error 2 gmake[2]: Leaving directory `/usr/ports/net/linphone-base/work/linphone-3.2.1/mediastreamer2' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/net/linphone-base/work/linphone-3.2.1' gmake: *** [all] Error 2 *** Error code 1 Stop in /usr/ports/net/linphone-base. ===>>> make failed for net/linphone-base ===>>> Aborting update I am not sure why linphone-base build fails. But it looks like linphone-base contains some version of ortp. And this creates a problem of the conflict: "They install files into the same place." Sylvio, should you consider renaming conflicting files stemming from ortp copy into some other name to remove such conflict? Yuri From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 01:47:30 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 03BAB106564A for ; Mon, 21 Nov 2011 01:47:30 +0000 (UTC) (envelope-from bruce@cran.org.uk) Received: from muon.cran.org.uk (muon.cran.org.uk [IPv6:2a01:348:0:15:5d59:5c40:0:1]) by mx1.freebsd.org (Postfix) with ESMTP id 8A3328FC12 for ; Mon, 21 Nov 2011 01:47:29 +0000 (UTC) Received: from muon.cran.org.uk (localhost [127.0.0.1]) by muon.cran.org.uk (Postfix) with ESMTP id B06E8E65E2 for ; Mon, 21 Nov 2011 01:47:28 +0000 (GMT) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=cran.org.uk; h=message-id :date:from:mime-version:to:subject:content-type :content-transfer-encoding; s=mail; bh=DtlaALUi1Zk5UTmM1FyxkU/eT TM=; b=G84hB5P1eNgZ2uAsw8dmebII9Eomk32sJGag1vtiNbGa9CO20r5vcZ3Nm ufiRk+uMc/QI/saoETm9gzQyF9lnBRKmK4F7pPNHiMG2+2oIkdIFAERQ3w43kuVU M+zAvrXkUUfq4keUtxkjYgPA0fyDiWw+Ki2YekLBIfHYyLsVAA= DomainKey-Signature: a=rsa-sha1; c=nofws; d=cran.org.uk; h=message-id :date:from:mime-version:to:subject:content-type :content-transfer-encoding; q=dns; s=mail; b=jwLKOoAtRQB8Tt2992/ e3klTgCN14ehdz6/9Z2c1HiYFmy6Q79d0zkcl/GZPUUTI+bBpaGpxuOPmDWjKplP ZZ32FnxBx/3/K6bmXUkM9iPFDk7UUnV6k7ImGzJbze0oUnbsFC01YZbnrno9T5Mj 2g/MEtPVf2AZL84Fn0czKQHI= Received: from [192.168.1.68] (188-220-36-32.zone11.bethere.co.uk [188.220.36.32]) (using TLSv1 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (No client certificate requested) by muon.cran.org.uk (Postfix) with ESMTPSA id 9BAF3E6585 for ; Mon, 21 Nov 2011 01:47:28 +0000 (GMT) Message-ID: <4EC9ADAF.5040002@cran.org.uk> Date: Mon, 21 Nov 2011 01:47:27 +0000 From: Bruce Cran User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: FreeBSD Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: 9.0 and bsdinstall - avoiding updating the MBR X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 01:47:30 -0000 I'm planning to install FreeBSD alongside a whole range of Windows builds for testing. In 8.x it's possible to tell the installer not to bother updating the MBR so you can use something like EasyBCD to boot it via the Windows bootloader instead. Is it still possible on 9.0-RC2 using bsdinstall? I don't seem to remember seeing any option to avoid writing out the new boot code. -- Bruce Cran From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 04:04:05 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 20702106566B for ; Mon, 21 Nov 2011 04:04:05 +0000 (UTC) (envelope-from apseudoutopia@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id A49938FC08 for ; Mon, 21 Nov 2011 04:04:04 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so8077843bkb.13 for ; Sun, 20 Nov 2011 20:04:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; bh=Eb7mnvV+t0F7F39+Pd8bBBFCA7RB/7a0MK4gB+e3kMw=; b=ATxZDTrRL3NdO3mYpJESRLGDeE/JNVpZ0gHXqFNCuuljqKYna4tvGak4oHQm9E4xHh wlIBPnWle8ORgBizmo6hE7G31IxzL42KlsdTWHcrtwJ8HnXfgju/aX0c+tNyAH+pjsPq a338WO9rG0t7yVgc/eufbFrx2GP2HYYIkNtng= MIME-Version: 1.0 Received: by 10.205.137.135 with SMTP id io7mr12735341bkc.88.1321846448791; Sun, 20 Nov 2011 19:34:08 -0800 (PST) Received: by 10.204.133.215 with HTTP; Sun, 20 Nov 2011 19:34:08 -0800 (PST) Date: Sun, 20 Nov 2011 22:34:08 -0500 Message-ID: From: APseudoUtopia To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=UTF-8 Subject: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 04:04:05 -0000 Hello, I'll be setting up a server with ZFS on 9.0-RELEASE (when it's released...). I've never used ZFS before, and although I've been reading quite a bit about it, I have some questions. My plan is to use RAID-Z1 across 4 disks. I'll be using GPT, and I would like the root to be ZFS as well. I found a guide: http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/RAIDZ1 In step #4, it has you create boot, swap, and zfs partitions on all 3 (which would be 4 in my case) disks. Then, in step #5, you install the bootloader into all 3 (4) drives. Why do you need boot and swap partitions on EACH disk? It seems to me that you would only need disk 1 to have boot, swap, and zfs, and the other 3 disks only have one partition (using the entire drive) for zfs's pool. Does it have to do with the RAIDZ1 setup? Even then, I don't understand it because it's not disk mirroring, it's RAID. The BIOS is set to look on one specific disk for the loader, not all of them. It seems I'm not understanding something entirely here. Also, with ZFS, you can have an unlimited number of filesystems, correct? I've been trying to figure out the best way to create these filesystems with the appropriate flags (specifically: atime, compression, devices, exec, quota, readonly, and setuid). If, for example, I set devices=off and suid=off on the tank/var filesystem, it is applied to the children filesystem, such as, /var/log, /var/db, and so on? The flags/properties can be changed on-the-fly, correct? If, for example, I set a filesystem noexec, but later realize I need exec, I can change it without issue? Does anyone with zfs experience have any tips on creating a filesystem layout, in terms of which filesystems to create and what flags/properties? Would it be bad to set noatime, nosuid, nodev, and noexec all on the tank, then allow each property appropriately for each directory as necessary? As in, set the whole tank noexec, but allow exec for /bin, /usr/home, /usr/local/bin, etc.? Thank you all very much! From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 04:26:38 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C56711065670 for ; Mon, 21 Nov 2011 04:26:38 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: from mail-vx0-f182.google.com (mail-vx0-f182.google.com [209.85.220.182]) by mx1.freebsd.org (Postfix) with ESMTP id 7F3D48FC17 for ; Mon, 21 Nov 2011 04:26:38 +0000 (UTC) Received: by vcbfl10 with SMTP id fl10so1859867vcb.13 for ; Sun, 20 Nov 2011 20:26:37 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=y5WfpM2fN4bHWw9kaUqIof/+SygCTy9fkVe6PU5lSCA=; b=pX5vWId2ypczVHVoEL2FGKrj8b2DlSTO4Lov1SbfNP5B5m5KKX9KqyGLSxd2X6rN53 SICu5BpA8+2ELSUldulG24PhFfV1HClvjLYZcybK8jOk6xydMGGil0Rsy+DPEmpq/FTq LoJidhuOd04eFMkmEnokUi3GDHye9/OTz53pU= MIME-Version: 1.0 Received: by 10.224.185.199 with SMTP id cp7mr4819879qab.68.1321849597565; Sun, 20 Nov 2011 20:26:37 -0800 (PST) Received: by 10.229.6.132 with HTTP; Sun, 20 Nov 2011 20:26:37 -0800 (PST) In-Reply-To: References: Date: Sun, 20 Nov 2011 23:26:37 -0500 Message-ID: From: Mehmet Erol Sanliturk To: APseudoUtopia Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 04:26:38 -0000 On Sun, Nov 20, 2011 at 10:34 PM, APseudoUtopia wrote: > Hello, > > I'll be setting up a server with ZFS on 9.0-RELEASE (when it's > released...). I've never used ZFS before, and although I've been > reading quite a bit about it, I have some questions. > > My plan is to use RAID-Z1 across 4 disks. I'll be using GPT, and I > would like the root to be ZFS as well. I found a guide: > http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/RAIDZ1 > > In step #4, it has you create boot, swap, and zfs partitions on all 3 > (which would be 4 in my case) disks. Then, in step #5, you install the > bootloader into all 3 (4) drives. Why do you need boot and swap > partitions on EACH disk? It seems to me that you would only need disk > 1 to have boot, swap, and zfs, and the other 3 disks only have one > partition (using the entire drive) for zfs's pool. Does it have to do > with the RAIDZ1 setup? Even then, I don't understand it because it's > not disk mirroring, it's RAID. The BIOS is set to look on one specific > disk for the loader, not all of them. It seems I'm not understanding > something entirely here. > http://en.wikipedia.org/wiki/RAID http://en.wikipedia.org/wiki/Category:RAID If disk 1 fails , the computer ( BIOS ) will look disk 2 . If disk 2 fails , the computer ( BIOS ) will look disk 3 . If disk ( n - 1 ) fails , the computer ( BIOS ) will look disk ( n ) . > > Also, with ZFS, you can have an unlimited number of filesystems, > correct? I've been trying to figure out the best way to create these > filesystems with the appropriate flags (specifically: atime, > compression, devices, exec, quota, readonly, and setuid). If, for > example, I set devices=off and suid=off on the tank/var filesystem, it > is applied to the children filesystem, such as, /var/log, /var/db, and > so on? The flags/properties can be changed on-the-fly, correct? If, > for example, I set a filesystem noexec, but later realize I need exec, > I can change it without issue? > > Does anyone with zfs experience have any tips on creating a filesystem > layout, in terms of which filesystems to create and what > flags/properties? Would it be bad to set noatime, nosuid, nodev, and > noexec all on the tank, then allow each property appropriately for > each directory as necessary? As in, set the whole tank noexec, but > allow exec for /bin, /usr/home, /usr/local/bin, etc.? > > Thank you all very much! > _______________________________________________ > Thank you very much . Mehmet Erol Sanliturk From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 07:23:08 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 79C28106564A for ; Mon, 21 Nov 2011 07:23:08 +0000 (UTC) (envelope-from vkushnir@bigmir.net) Received: from ex.volia.net (ex.volia.net [82.144.192.10]) by mx1.freebsd.org (Postfix) with ESMTP id EF1328FC13 for ; Mon, 21 Nov 2011 07:23:06 +0000 (UTC) Received: from em.volia.net ([82.144.192.9]) by ex.volia.net with esmtp (Exim 4.63 (FreeBSD)) (envelope-from ) id 1RSODZ-000Cpy-Hj for freebsd-questions@freebsd.org; Mon, 21 Nov 2011 09:23:05 +0200 Received: from enough.saddler.volia.net ([93.72.207.82] helo=kushnir1.kiev.ua) by em.volia.net with esmtp (Exim 4.63 (FreeBSD)) (envelope-from ) id 1RSODZ-00041B-69 for freebsd-questions@freebsd.org; Mon, 21 Nov 2011 09:23:05 +0200 Received: from localhost (localhost [IPv6:::1]) by kushnir1.kiev.ua (8.14.5/8.14.5) with ESMTP id pAL7N6m2011768 for ; Mon, 21 Nov 2011 09:23:06 +0200 (EET) (envelope-from vkushnir@bigmir.net) Date: Mon, 21 Nov 2011 09:23:06 +0200 (EET) From: Vladimir Kushnir X-X-Sender: vkushnir@kushnir1.kiev.ua To: freebsd-questions@freebsd.org Message-ID: User-Agent: Alpine 2.00 (BSF 1167 2008-08-23) MIME-Version: 1.0 Content-Type: MULTIPART/Mixed; BOUNDARY="4266313884-669419637-1321439435=:26465" Content-ID: X-Volia-Original-IP: 93.72.207.82 Subject: Base compiler and amdfam10 - anybody/anything? (fwd) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 07:23:08 -0000 This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. --4266313884-669419637-1321439435=:26465 Content-Type: TEXT/PLAIN; FORMAT=flowed; CHARSET=US-ASCII Content-ID: Sorry for crossposting but since no one on hackers@ seems to be interested... ---------- Forwarded message ---------- Date: Wed, 16 Nov 2011 12:30:35 +0200 (EET) From: Vladimir Kushnir To: hackers@freebsd.org Subject: Base compiler and amdfam10 - anybody/anything? Hi, Are there any attempts to bring to -CURRENT newer AMD chips support? Personally, I've just tried to apply the patches from openSUSE's gcc-4.2.1 SRPM. With slight adaptation they've applied and gave rather significant boost in resulting code speed. At least, testfcpy by Alexander Konovalenko (http://daemon.safety.sci.kth.se/~kono/testfcpu) gave me ~20% (!) speedup with -march=amdfam10 compared to our -march=athlon64-sse3 on Phenom II 970. Unfortunately, the patched compiler with -march=amdfam10 fails in buildworld ("internal compiler error"'s while compiling clang). The buildworld was successful with patched compiler and -march=athlon64-sse3 but since this is my main working system... Well, I had to come back to our unpatched compiler :-( If anyone is interested, the patches were taken from gcc42-4.2.1_20070724-17.src.rpm (actually, I applied all the patches marked as AMD stuff), the resulting patches towards our src/contrib/gcc and share/mk/bsd.cpu.mk are attached (or I can send them by email), and I am quite ready to test what comes out of it. WBR, Vladimir --4266313884-669419637-1321439435=:26465 Content-Type: APPLICATION/OCTET-STREAM; NAME=gcc-amdfam10.diff.gz Content-Transfer-Encoding: BASE64 Content-ID: Content-Description: Content-Disposition: ATTACHMENT; FILENAME=gcc-amdfam10.diff.gz H4sICLaXwk4AA2djYy1hbWRmYW0xMC5kaWZmAO19a3fbtrLoZ3fdH4H6nN1j JbTDlyjKac6u60fjU7/qR5vefbq4aJGyuCOJikjZTpPc335nAJAEKZCiZPmV Nqu1JBIYYJ4YDAbAixcvyMbGq6tOZyMcB1evNl55YeeVfxv7Q28j9m+DFV3V tHW1ua7pRNM3DXNTMzfU5B95qRqq+s36+jopqYn/NYlqb5rqptrK1dSh5ov8 P/xNWnqzqbR0SyX0EQLnj1otAr/WvyHk2u4FxHEuJ0E/DoZO4Bq6M3IvoxtN t8kavm1AqR+gLyQauP2+f+sORn0fnn3zkpz3fNIN+/3wJhheEQpjPRiS7mTY iYNwGBF37BP32g367mXfJzc9f0h+CEf47tP6IIp80/1CgohMIt/bAHjw3w+5 Vl6S6zDwiPjPGQycKB77Lnx4ZM0LJwD6heI4A+ix13gNdX7yh/7Yjf2IxNDB Hzqh538ahNfDOPK+kIHb6QVDnwRDgDKh/dyY1U5E1rr90I2TZma0EpW2wqoH +VaA1WO3EztRYJlkjRdRkrKlbWG1D9KWyE0Q90g47H8kZ2e7ZOxfBVHsj0k4 AiBDL5rVk6DYlWAY0z8L9yXXDegCCQYD3wsAyuxOATB/PDd1WK0l04cBnSJP fTrN7lVNSk0rJGgPuaNCGt4wvBEUkpCtfp+EXURgQK44PhQdWf/jnhtj5ZE7 jnktMnQHPgKi9mjaPgbD6/C9v4h9nKrJ7WN707A2VbOWfWxqhtLU2sw6ErI+ GIbr3dH62EeirRt2C59FYTdep9pPf12PjfWo1w8uyQ9XYT+pdRN4/vpgAiZ0 BEIFz8axhx9uP7garjMblVUYjf2uPx773noUu53365fhZOi5449vfrh2x5+G k8EXVvZbKDsY3NJ2I59/6OzDoB/sk/ItAx/3wGp5Ee8a6wJwCSQiHNGnwbAP vIM3feF51rtJ1Ft3x1e0qNvpTAAvYPt6OImvQiicvgOZvwzi9X4Iz4ootq3i KySKfwWyMRDQZLjw56w2sjhhDB+jni1j6AiXMgjgh6POMMbmLwdfC79kitVW LU2BP1bmePBHLTVh6uHhOwWtHf2jK8Twjo5/+1Yh/rDnDju+xx9QG2iZ69C9 nLGJ/JhQHylCu7ZBnZQgBjP13l5H6itgLsGEhkP+y417gB0Awp9QeB+YHV5D M9f+mIJAi/XeTqvRdpNKqWk2pvoQTUajcBxTm0zbdwde1x1oqkIu3XHHh/ou vNs63CF77iAAIdTUHumEYIcvXbCyZPvkImLwb21rHdoqa4GQtfNeEAEweAKd 9uNoiojYRfrX3CqlqEK2fjwUyAoAaxEWhhSw+aP1joXk2zknv7EHZNtCJBTi +W4fmUQiMPrkxv1I3IgEpm0x9FzPC7AFt4/dFtsEeDlSSkXKAMe1bVi6IFJG sw2PWnoiUrSft0yNOJtZ17lGThXBZy+FMqCtwm8GBR5lYKgiF8CwZ1k1puTJ A14o/5BZgEIRfEJwNA6Gnn9L0MDkfkOR4iPoXgmxLBMpoyZDW1YlxUCEmzwE 9wHMWQTs6sA3EBzqJYRj4gUR/YpDOvgGqCsC/yJkOr5CcQTjKBFIVB2AY+wc hTffMvnyQCILghdtpJ3IRJD5LP0oFBwXEKxp52YTQODE5Aew4p/egdj9mBTZ S4p8UcA9AnT8GCBFiZOSuUcMYw+1AwBxrD1y+RHLCaTZ4ALYQjLbqU17CmRO 1R+1/Ksi+bQL2QmHXfgSGLb1yh/AOImj40Zv2pXU9RJXshKCOOXWtFoupaEq hpVo3X8EXSB5lzi7h4f7R+en+0fOW2f/aPvgYmd3B9/DS3Siy94DjwEEheAg nx2HAh12+hPPJ9/fZv39byxNyKsXVB7Ii1cUPeiMmcrmcjozzPUGHhHwl4C9 q7Td4jgyDOOEv6tY2O+DwfoWQUFPf4PZgQ+cpu0GTBi643BA5QOnQT3wimAS 1A36fgQY1Ua9Wk7wz8IiIlbOpKO1aTRrSYdmaopmCl4Re5AGYxIenG+d/rR7 7vy0e7R7ur9t6GQtAOfAiSfw7s0bcnJ6vL17dnZ8mpVolNbGmWp1bcssrw0+ R7Evnz9PtdCAoaxQHxyeva1DTS1tPCnQYPxLq18c7R5unf1M1jTy/fckrYzF 0ECNh+A8gZjhNBs9JgfspNP33WtfoT/RG3YG/iAcf2QP/gRvzmHWz0E/xAFD 81rOHXAnNCBXxh1LhQdWwh1p8/4o6IdXEx/6Ab62MwiTjnh+JwRfgPXudVl1 cBGhR31wliKnC17aR2cATqcDUxwGJeoF3VgrrQ4OgIPT7cDtO+CVQ6MjtPIA R0nfR6N+EOPbCKMSpWAmQzrz8D2Kg4NBAZglVbYcfxz5oJuRE8Xgz0ZZkzAp 81Tn8qMzug3HpSCQc93u2PdHpUXg0x9D1wAB7FXSBIwH3qTvy9moqy1F1wQ/ UVfb8MAqUbKTrdPz/a0D53T3J2dn92T3aGf3aPt3skaFSUpa8l0qpRLFAStU BvN/ofQK/GMBpbVqBuZamVIvbOXiaOtg/6ej3R3n8PjXXef45Hz/cOsAWnkp a0XO39m4nJ0c7J8jJmcZrEykZtc///1k9wBU3jk7Pz7dFYAUpGc2pIPjrR3V +fF35+Td8WkGJydsOSjSAbrdhkFRUHJTNRRTS4fJlS8r7B8yi/3DUYsE3dQU /mw30hIrSeCcd3dt1aHmynlvO85q4zUr97IEUmoDV5JypfCSaWUCtbx7IG7n +xeHZo1OgqzFwWRgzgZ6dLx9fLSVgJQR1tTB29CbAmF1SzENIyWspBPorwpk ShoX2qUubWOlEpWzApiXMjDgEmdULuuMucXBkMK/kr7tOodb52/Jd98JYtqo 7CmrMU3vmWD1RjnlW03FtIVFHtMGkW5nlCdE0pf3tkD3siI55giqMSXQQTKY lQzyiXh/EkDIG00EPaHQrHIZLV9WKm9JD0VtoUh+EkDIW060JmlXxhMawUy0 YcqabZ9cwLiwt3VxcO4MQxjyXKK1qothxAhcVbu6FI3RBx2itQte1XTRo61D sMafVtGlXVXIKgZq8JNjJ3zFsMOqkg1eyfPROBRK6cJ3A75nLKj6t5oSE2pf +aHn45f3Fvu7rvPPBCDvAIvL4Tv2bZ1WB4nOlUq7T3sGQ0wnjGP8zkhOC3+b FKb0ZZ2gJFz9winI5zzb2xoMhbvbAlGTR2T1H2udjuZ0RpMGWWUBbLB9TaNd 4nI8BPunPAaxXKI74Br9LSd3lBMEnpishWVG6sdqqg1+q2YInqym6+jb2olg EcGSbYN7pSuFh+m0reSFZSrUmE+b7GKFgYuxxy+v5Yt5U5PkDp9hG+tai2ja pmluGsbUJLlkht0pLuk1NzW73pKeaSvNpkAyfGBpAsG2j8/Oz5wjZ//o7Ai8 UaPZUICzr17AzCOiy5Z7Z7+cnucW7gmh4QeG+0vCXhAQ6w64r+HYwZpRGvin P8kb8okSttCc1lBk4i007w4xUp4LpUDrElD6bFAEpp41IJV36todBzT6R+eh hCE6LxA6pXNhRicB8qnIDikUASeABLOl4RVJF/UwuvjLfgKw2C2zDGD1v7el AEt7WP3vbNk93CkF2Gx8kUCcCTCMe/44galKmSmBmfAlZccIgPguuFm4YodB wBJOa20Z3jnp9YLrwPNfDUJvBpNRiefDuJy/TakgV8EqZ60tFZYqWOVcBVgS tlbByjF0WlvzVm8QXke3cxT+My1sK9RfhterfXd85a+ixUlNTTt9S4MUp1vn +8fJOzN9RwEjj3Eyj9r9yz5wHRdBqKpDc5f9VJAMBWoS44uyku9VUheDRleA eZJGE/GACM7qgiEHrYAI0CZwIfSMft0Qyp36fTcOrn0ShwhnHf7Hbvhodtl4 UNkVDGlIu1KCOlSBIgq20u17r7pRpjYmbULTS9HtjgqYEurZMGTP9hiyO3sp su/Y1wS+pRD4zy5FoQB+Xvj6FKJARoSLa8BpopNAz3K+ijUKPD3LeLmzn0MP yVeK2yIQSxHKZW7luVeOk1hJ2gMlaR57cj6Nm0KapejdBbiR6S0QCTQzhx5o RSLavHxS+nhIfrazJ2iHQPF3sCr4muR2gFklZGWHJpms7NGgIDGFzqXFwWet URzaSzxWGRBZm1s7O8RIQxiL/9NeafRP3c4vu92E9FZmTKLgT7pqTBOZYhyE +2HnfVIQChz5NzQXJXVeIzL0r4GN3jgcpdX86DXGTGD8+Eg67hCX8S59HNnB RA98L8EhTU3sf1RYYVw3/jDxJ74HRvI3ny0CTgaXmFwJchmgl+AO/XASCW0l 4ECowGPFISRzGan57fZ98LfjXhCRtYA63pfglH7EXEPsmkuuQnARwFVw8bcA rh8MArEDWZvEhXr9voLL2tDzAHyWW78zoU4yXfiO3fdQKgoHfgovGPiC7ddU NSW70II7xpzMvtgUr9BMi/84doedHlNX+YhrTk1KUHhQS/fOLn6kA2yUdWVm 5cOLg+kJjWygb09V3dn/tVZVfbrHP54tWHP7bb2ateduL3HuRhNkQarioMPk i/6UTuXSuHg6lSMSYhUbl8/cZLNU2zAV2xQWIex2W2lrWjFeNKDhSZNAY99/ L4lZ5or+bBfL/WznS2ydvz04PmIFafnP6UNxiWmQLd4WAIprtllptjZQLMtX DHIlaYiiWJA+zJcTFr5zRaXL3QNxpVtW3DKlxZEGwqq2CKdAjYRsIl0K9GNf 80vaIBo/8YCcKBOdXhh0cEYdTvoe2tVOOBhgwsTkEs0l2kmWCMeTA1l8bO3k ZBy+ouLwipH2FSXcqy0a2XoFvGayLpU301JsS0ui0dCxA1wxTw1otwsGFj2G IxaNxAiVjoGWsR+BxcYx4oq6w2jowTjSnA7qHIZj1j2OKLAg8v1BBJb3vc/M Mua9s3EpHrueH3a7bGiAceW/kuwQEjDv39AxH5ECTEKZl37HxVSoIE56exOO 32PbN36/zzILkTQ0m5JgPiI3jN+W5QmAPg8cw7Yoy362gOvHO7sCKxPGMmHN ycXrKahCukFduEylP2eKI20MY035pmSJDLRNk7eJgKd7CN7pLS1W6AWoyRzd 4d8RI5AeEU+g9XRfWQ4x76aH3fx/tM50SWQLMN2JfWppeakp5g3HYb+P+3H6 /nAK6TxCeTx/tsroW2yjQ+d3b0RQdVk4DYym+jlunvDTxTzfHzmXzB3ItbwU +clcjR40GIHGgHs2mtAc3ROT5x+j5QloyjgaJ6bwG+THCddDt4v+PpS+AU9p 4OKcYRgmriCmFYOGDsFSxrRACCZsjFnVyHkG4FLowQbZj5l7FQw7Yx/aZ5tj UhuxQbbYE9YPhaVZaobSzmLef1uvGVYmG6buyYzlG3h0e1boztdv2PIIL9vC VXO3pqnLgNzZ6C0qbV+B9ZP6ci1Dse00s6Cgx0IqGUx1wMQkBJ4W0KRst+9e 5SrUU1+U716AISOnG4SjnNkwC+ZDIveYRZar/f/WSsfwVBWmutWQ9wvkXKUd +rlEMTv92EvaTICX6ZGkDdyvBY14QfejczMOYp/ZAWawKgoXm0R8JeBZeh1u xmJZjwITpwz3OByEse/wePmbohalTRVZM8PXfc2sIdO2f7L1z3zLXTeKHYxy BLdFtJI2oE0ZdjD8gQlNdrLlBGfa2hRrf2BCg1mytFkVWqBOgqkq7Wa6Fegr V4tpm/i3ftyTfszwpp6VokjHE7uNWzWT8YTQXMRwMiaYZT3wqWfr4ukI6LVy 5SBUJyI2KuJWRp/54Nd+kiuR70uv0JdSzibs6gUsu7icsdHk0vGjkWPefW5b DtyuAl6UmEUbAzeyFJMpWb1LA5XY5FpaFmp8jchhq4OpsqIA1JjTpn2rcNob EpWXp9NLcF8QKzZPcgZBBALd6QkjynLgZ3u4nWQPt0P3cNdsopxuUoUrbl+p kpIaECUbYu4Ike2BYUOIKZtElW+iYQZkRohorinF/jAN6qJMwxzeJz2cl7t0 70q3H3Ri0sOpBkwzLv34xod5HYvd8kUFPvOgk31mcOnBGewUAMI26eeXbnGR ig0GBLfCRHTP+iQi0H8BFgXDALLEmQKQOCTxTUgsE+H33P51uo21aSntlpGl yD3rEeBO0YDaQ0FJK/c8JjiFif/9DQ4l+D3aKDHt8D7kcFGj9eWMG8tpqN4A cieS/j2SzJyR/VWHFNkko63B7Fw3hUkGzeZgJ09hEA4DcjjNgWeYjaKr/6Bh fJZ8NvYjPJZAITe9ADqcxu+hUXp4CPzDfrP643By1et/JPqG+Q+hMqNIxx3S TBbQeSgycKP37KiBjgvzs0mf8J2lAIiBZdldfklQvmLz5pvFVAp3sftsNYGf sBXhIV1jdiQE7pikSSBpQ4HPzmoAJMP+NYtnAotY59NsLexjRNegURwAp5te 2PczPtJVkRs81AtpAtjB/+Tfk4izvh/ecCB0cbrj9t0xuXb7E5+eSAGKjzm/ NCIaY8Y5zYajR1iMRrwiAzQZsjV1T+4jFHaWzlg6k20hLVSRNZDfLZoLP88O dWc7lmc1NfZHaLD66T7b4uS9YlylkiGPywTDjud3hDDCbCNDfSzm57VaSrut C37e30oodRUSU/63Rs6tkSW7zN/kqDq3Kuc48kA6XdHmU1Nu6Yir07Ox5MtE /m3s2Cp4NU6SaBlNh0aFxKYZnRFWE3k6VaI5IUwft08uSIfyFPWCrtjTM45C zJH00LehE0gwDUNiJgtmhWOPEnPlE80CUxH7eBqZF97ITUIXJq/OvyeDkcMS QHMSsZwYTXIERRVseaC5BnC6dBxPDzFA0e1wMKKHM4HN8W87QLMrn07CYR7n s20ytgqurVyfO4MR1LnKrVqXAbUpnaMCcJ4ZycDTQaXdUjRVbcoXXv4WtKVN 6mZI3IzQwF1ErzgePikZlNo+XAs0Lbnt4+1r1iXFssgE3p3dpAv0GEjPq4/f bT4tZDrc4MH4EU/GQ1k8VzopSGeJHUwSQtmEyeHYvaKn7+IUcTJkDgqf0CVn qxE8I7fDMhuCSPQcqApQ5y9RS4X4KMC4VkXWLifgNYSA/bhBkmk9PZ+NHoqk qjZovGbKNf6pkteZsYz3pOgsE2qtqWmK1jTESTTr6fHJuYNHQW7yh+w0kW+p P4ipyCufcPs6WDXcWhHThe2IfIduBh6TQw8XAVIk343sOx698nq6Llh18Ak7 gMbnN2Q2CCTtype0b4w7BIyuz4k+hYi+OCYL9v6uPTbm7rHYWq0+zu4X1c5m Cw8xU8VZ3j1Lya65tVSRKcJ7LPlZGK+l4jK/ZK3dtf/z9Vluq2wVbJUtZhXA v0/fsRM16LYaBfeYF//7ogiF6VEbubKapZCW8JErznNujZlVvi1WsczqKryR LymPxF1EBEayMXmR/BhNHDzzPvrXHzD+lB2n8pofL2jCSGo1m6KuPl8qiVVy Z2EkNXBPZEv4uA+6yqWxjXRW05ETlODkfMsxdo6OfwNo7HAU8aGzBY/xaJT0 sWX+uH8ODzXdVpga4VN2rvEbojctqiSEKtXrBC/6yfqf7TBz+4EbOTFOTRAX LgkWzKKs7FaW++ghfwouDr7YfgcTnDekqQE36MyGVzg5Ptk+onBU3RQA4WnC AAYcM8rnFDxaizfEVNuLU0DKM8sy8OxNWziNs2VYitYy01OVkj23BMwV74xB RGFPTv3p3q4qwkk2P9sKLY8bm1nNk9Pdvd3z7bcIgj9ipP+ckVbSYMKJtPns m/5FSXf6fsoOCFJkB+3U7Ez9ncNCr8t6Oi8wPlynZP4sCMu8sFCUPgvi8+rF 51QkX7zKES49Qv9vytWiXFL802pq53OUy46DIipaAuY14Lyb3oaD177QGc76 gJ6Ux87ephMxIoNumTLouOc+I+OCrXwpseW23lQ02xBOO9TaKtiFtq4LxjPn FE370OhJye1R8McG96SmJKrBQLO1bra5G6PPYP2YL4RnYwCytWEj0xq0Fpme OVOQbOvyHL1NhIpaqe++I9+uyZ297xhBWPlGg9WQ0owVeT1XN0BK6/cBCld2 AN7P1zrVjPrts5NBq3pAS6Riw10PJtsUfK1e0fINLkLsyPS1VQxYfgwnJPLx gAM8Cj302S4xvgM4uRJklQ4+ZLVwvvpqSUqvrqqGAn/s3BnITUXXVDPzNadO WeWaV0YEgx9/Rl2Ic5wDsKUtIzkjM+JKTS/NyDbtTx3Dyq1eRTsvmTuYb0eX tGMkQaJiMzOx0ctIhyfsqXpLPHRPw3P49JaUdHR8qGwMxicZ5bijVcDJvRxI KYdqUkW3TE+LHWSSxzv4KTeZTGDjKdLOzvHFjwe78kOT27rZUtp6M/Ogv2TT 1SLpdVQLlm3/hvyqs6yuBnqSfMY6jm8Jbv7jbj/zSX/Dq8gKKSowYNDVR4zu hTy/RMFlUVxBphmJrDr8w10GdJEzZOuy4QjLd0l8E3R8YbXCQETwFpn0uOcF EEnHQeG7iBa94SD7VzjbV35sdyNXpQgb/4Uj3LMBI6/TD2/o2u9a0im8tUil 8/tiFa2qiiapguFJh8Y717AeRlNwrXMy8sgaNMKqSeqxsEDx+ZeHZbFcdlsW bh/WhdmfDElcRO4JWMKfQaNRCH7wCyxWPjE4Bc7Kj31vJBjQVumyOGuatrF9 fHR2rjqn5+/IGpUv1iRvismsjbfMtG3Bv7krAnIpu0dBNc/mFlShSj1BZXIa LSan35IHYqnUqzVsA6a78Fec7xptsw0P2/kAEY0OTp8Fsyl/zdY/Sl7+bG/y MaVYi0+wSuqxRZ2Sl+kUo/q9BT2WksJUDbwTRTXy16RgqMzUmqn/8oDozoFR Ik/pVnocqd04Hieb69dQTkrcNs1smaaCf9si6ralw0O7JUjB/juYL/x4sX9w vn8EIvrj2W806iN9tcNfJf5Hug62zi6KokeC7Qur4Jn/kYMFNuDo/GxHKXtz Jnmz++789Jf9sheS5/tHZ7un59Iq/JWSuDi5l7/ubkOB/XPnV/1sX0KI7L35 tvq9jY1LudM0LZDBptkSThfWms02sKxpZWc34b831K3znGSFkGY3Of0AF/1w TGO/h2jdvkkOU6T/Rhj0FN6SXzXrl33xwdHFwYFzfrq720idynjs++Ra9wKn SwvSr5NhxPKwki9c9Ku6Br5Brq3C7xrRirRVAYrkWQ1IIp6lSN4Xps8Ac836 ECwD0YJ8zd0/KvG0i/QqVlulwF4XHoMNmnrOfstVzVZRq2xVNISgaWAIm21L UDXP7yZXl5O1LMijkNWpK80xLXG8qpCUjvAF/gO/U0ldzCnzif7PaeO1zHxm xjO5Fi9KDaesW/ROvmK3+K3k0K1pwlNDwbo64seOAOu7itQsc1mZs+FoZsOU e861GcnbPZu3XXpReCBvdpYFU2SDy0IdWJXIuVTDFNm4NW+T/NLvoFardTBP RskFO1K3H/JWG2J4ZquDoa9kSnbtdxy8yo+MwOXxx4krgWUp6BmW6ixnmZJd YcWhkmrq9MucWZIaFctQ8To3IwmLIRx/OBnQ7B6HHsIS4F/RRg09v4PpvQgX JkC7p1tHOzA/yP3yb0cKURv4v1DVHV9RvIp1aelkPpOUhEkD/NXoX529wmhC Mo/BP7qCVGXvaK95NrpDAxQxmynhX5V9aOxDZx8G61kiTzRdqtthJyLs7G4f OHsXR9vn+8dHzjZmDa4xxBvZwiwN0cPzDg2B8NXrpo735VlqZo+fIj3pX6OU quHIuBtp2Ye5XArLJdjWcCHb1kUP1Gq3QKxbqm3k0wiE+TFg13idvkgSOGgY MR3a+KxGNrZspuaCVw1Yau/IHXosXT8zP4icsweTIhoEdq4HdKBh4xZnITMg 1W2eLaFNOmbVapNbts3SAtTsZ10KOF/XOIPfSEpPm9h/kkJH6VA0XW6zWI6b bW7t8R+KeKIJv24dXIA8iYimhbRCIfp9++3W/lFWQajBAjecyEPcPdKn5dRc GU1aRhPKxPysFWoIPDd2/0Up9scGbkuBev9S/9gYUMuQ1KBqVVVDk9XQq2ro xRo0fYqsvahqgyWKu7Hf4LEc2rFGQ+ASI1InHH104pCaCNwcwyI9WhLfqt2m XmwzMS6FNrXSNvUkQCa2STem4KmFnz9zRUcpVXPCBq8wynVIzREr1CDfvmHc K5asRELNI8FgKQxQDo+kKzTSh5u10B6vsXIZAmCuoMhPu0fO3jYIKm1MAJtG 94pkRjMnNMYNB/ULTs/fZaWnLGPB1CSWscJiMN9z2iLINDy4d73FUa6ihrT2 Pag9DKfSMvqTNw10HK+qYXxFxuRTTreTtWh+S70bvSeDSUTP+3eH2Qn/q0I/ BFWp1GMMq9fuu1Hse+Je1eh73x9exb377fxfwaJSj/gxzWoysZ1pWJMp9VM3 rTjzqFldDuqRzDRMiqRljK/QlNPZW1UNM6vxSPb/kfzJh7Hejz3ymMW+JzP6 v0eehx15aCzmIYYf9nx6+MmtIm7WKGa+rVXMxhHtxew7UwcevzS1ua7pRNM3 DXNT13P3nhrll6Ymtfmtqfam2S7WLrs1VWsauNwiLrZg9r2QLEjWLo7wLBDn 5Oztxd6PKyuarjaKb/Z/OsIXWvEFW0bBV3ojNSuvyR67VczcStId2YukGptj kfw/zVAbkmJkqpjWIElkKymZeBeFknpDWqwIkGcU/sEvd1ljB2dk+9rlhG3r itZOA87/B/5//ZqcJBmj9PyQDULOcYsopgkEl5PYZ5bEv3U77HwUjAtieD1L NMVqDBTGK0Fx+TZUQgWht/HNt2n/ECpZ7Ywmq4Re4azg/c0K30KtZDc0K/RS ZeW9pbBNE8krU3lvK2xDkkK3GilpZrmSZYFT0qyxjR5r0cfBZYiHsXShSQzb xZMhWMIGpxz0egsPmSpci8NJcUq7PfDxpABvQnfvg+JO2AP4cenzpG9b0bNs 1q+VsEq6c+RBKSwTZR1zijVdPCeYnleiBPRUNf6hKeMwhqGDf2gKHq6vBF5w zRP7g85gpOCdCEpwOVYiP+4ABLyYgL/HmyiUUThSOng9G/65VujFF3x7GaCj dPoeL93Fil0o3Y2uhkoX2+piW91RNOooXQq3iy12bzs9pQs+9Yj+xY/x0OOL vwg28vvhlcI+NPwMXM+jn1EPsMMvCJ13IvLxCUKHD14QX8MHtoYf4SCgn9es Mv/MCDEY3CrwP8KAD4SBvwAGfCAM/IA68IEdEPnPT4Qmq/SC11XGdZ7kDSyy xYM8H4tFl0E8cIfB6LnzCn8Oo/thmVTLdFXRdWHfLNb3yL/W/A/c4qAWg8m5 OzVXkyzGQhfBmLX4u6lW5yA9Xam9E/HLOghvy/o3J4dKGoDXq2yRE1ih6Iaw mf4vzA6uC4/MFanSGKA0Rqo0bAQ8h4F97TKcDOmxxQP3FigxaBA+Y2PXNYqj Yzpn2xC8O4YGq+NkszqyukqNS5k0cLMrms5k3AJDqVAjoNAb05ndpdaziDeu IKtFiuJhnczhaCE/FEYUWT0qvgaIr2kIObPPkTDKVBK3+C8ZaZZMPqmc2aai t9VEzoCWeDTgDW5rULsweaWxSn7TA/iduM9xmmbsvaN2KbGoTQm6DiA+dDA/ PNk6shZggGGKfnj7lUi+KZXjGKbIJTt/BOw0yTMVnUcqMm0NcEz3Oj0FHJUC i5eDrIzBpmYoptYWdooUjRBuski6gWcXFXr/Ddun963bn2jK0L8ahpnXRY0w uleIEkMy87S+4Rerd7OBAgeS5HHecFebajoUJBXzpjcztnx8M8HdMMHdyHaW PBTCqYP4CJjLWN+2bKXdamWO12rk9rpMeP+1FvE0/sTkgdBpq0mYI3vJZngO mDjQEihz7XficCwpOGDvz/ZXG39kkzZ+nDNOY+n+Jy8EX9ofRUTDo5zxSFVi 4GQ0HOLthBtsz0qieTT0tfoCEO2OnMAZBLe+J3SfrI39q83t7b0Tsnew9dMZ 7mihbAV+05PX2Ls1djQ5jwYSlawmm7WSZ+jsKIl/1G41lbYt7ExYKtVeFgsm p4qkRb1gDIXvkcBQCYXthUIm/LObfAbsS5e9AGOGp4TnjhNEsuNAGLB7f6FL UeNRWSYVfBtY2NZyJ/XkrXW+gc2zPSDXKlr2xLRK5jlne1Vvd/ZosOLbmoJQ jLkV6Iae5yyqsaMqDTyqUs3lyT0xVKcLlsr8EqgikwekEJLJesYSQedMdUQC 8GzjYYbWX0MmatFFLhQa0klviq6RHDH+8g+5O/FumXyeVJjMi2lW64iCkXN2 HgCFpXGvNrZyBhomYG+qz1erJ6UmTcJrswnYNvW/hFrXJIxcLHCLsdpsPmex KDNqErGwNMDWsv8iYlGLMHKxwK2uast8DHPP1/IO8bof0Z3GMANno41stO0n bskrEZGSXW+BkdZtwUiLkyghPlI945l6h0uOzsgNxlBgOJJhUlP1WEYYNnbd C3KylVebt/s4DxmGwzQ0KMxF+NwREAUh09vC7PGRsa3DYLoREwlDKGHugTZS yTDaGh4FYT9ZyeC2J7pxR73A0WfiL5mjvmSRkpXp8lppeS5KJh4BZ2rPW5Re orU4wmsL6EHohRp46njHT44+Fc8lOTvfOjjAYKwXRHj2GDtcL9mo/BR4JBXp pgU+WrOlPweR/lBNrl9KyfVBSq5fSsn1IRXppk13u2vPSaQzSj6CSD8sj2Qi rWu4eq+Jy/dz82znocbvuGqMOq8xfuswHgG2pnUHCV0utksbv+9EG5lkwNCk KvBHkIzVznUcR5EeBZ8+fPnf+NM/NIX8Q/38DxU+tC/TIfRsyT9gqxhlSr9X g2KMDEq15cMlPHBahx2v603HE/NE2SnTrjdjZZwsNmktJEJLOEjxKRGhtvQo mRDdN9lKZKkNZLSaRVnylk7GneXLUtSNZhHlrJYs2ShL9pQsPQ0iLF2WlkA2 uSzBRB9U0pTZpactSN6yBKmNgtSWGqWvTYqWQDO5FLVaqIyGzCI9ESnCnGg8 2IiwF4SVp37lIMKsJ0wEF6I0YlLLyPdHeD+nnuRMYNKEKjU9z1ZilkMfqXSY BtgY+Cf3itPUAL2cFG9lbqKQyzWvR8wjc9vhEK+9xsX55FrtLi6xkFGIaULo DdLzrzBYSB+lIUjTtHTAyWrLfd8HxmmBmdmdKCDnsg1eidk2s01EZlMzFbOp iwvuJa5aCR1eKDRT74XyokbaCJTiepAKd40MElmtYksYTYcpSTTuQAU8mb80 VkCJFQVRV2dmVk6pNlCqqeYopTfhkVE92a/n9c4i0/wkuhfysKVoKX2aho7E aIn0QZe3aTX/YpLkzZCkpomUMnOUwjlWs1U9Kf9KJMmbJUkWjtSW2hToY+kg SZZRLUk7y5SkZMBNUtUeySZ5lZJkaUgpLUcpEx/NCO/U82JmkWl+Et0Leaok yTSQGLZInxaMbpZdPbp9fZLkzZKkJlKqmaOUDaObNSOU/ZVIkjdDkizbUhX4 I2iaZbcNxWqrgqatipd3sCkEy0BgEfXjYXYOLXuyf3hxgPcq4N1L/CMYDGyy skMpMV1o4A+yQr9SGpwAMaugGXodcFgqg1fWPbJSDUp8P03pwaTvBYajOWP/ Ntl9PH98TUnXsib9GItOV9ZKA73/GA8U+E8tmRJbtq0Dm21haLbaOrLZSLfj sKNMC+m70CI7Kj4XVG7w4oUEhtSr/6YsCSJRhIagCmRNrgv0EqRk504+19/t 43muMA+4RpVRFY0VngeBl9UIvJyJAH9ftZRQutwx6UeBUaaQbeRUO8cpmLFa 7aZgsFbnUUK8Xo1/lCshvgVCZYXKlDAPrUwJ8+DySlgCr0QHU0gzdTBCHVw0 lpTXvrMp7Tu7i/a1NVQ1zRZ5arXgkXDF5t/at0TtO5NoX0FQnD/927hEB5nC mYbIr3ZLaanq3/x6MH4J1rJXai3bJjWNAqdaqqYDp3Rz2n15u48nEjmHW+dv K+1n3gDhlcL8o9oyYgmgXr2CGUTNqgtyVkn6UWJGU0jZe5lq9GbY0NJMnGkb +nbKhr69kw21LDSYmshpA3XSLKbQl4q+prAA6MMqYw09vINiVcVzKzTqQ7lG tZDOdo7OTQ3oLB6snmjULxUaNaVQXBILDgg+BcEUn0ol88MMySxNqHnjilL5 y5RU/lIpleXy2IaJU7vdFOlktYFOrWZVPncqDeyoHjZhrMrXzm/arCuZM1OC E1hl8vNLhfxMKDtKjTJYYAstcE6E2vBIUyt3QHwNpJlFGVNFiyUKjaaDcuWu 8/w6KTOhs+S4nDQWCk3OvuMtay3hkrWHIg2PvdQjDS88izQ7+a2/v9ErJf8r xhMLSIzHgvFLSnC/r2VeBjFhFz2wnET4OfYjsF8Rvo9vQhL5I3cMtooY+iV9 y++wLCFu2wDitm2RuC3USPvBNfI+iDvDfawSO01ro/oJq18tPFoM/rSfA2UW Dj945RQxm6h1qkgRA8yWblRuS30qFLmLrEx4JK8XXPXw2s8yCtlosm1LpBBM 51t6y/gaKFQlOxM+fZ5BIR09AD3nARioVcbz1qqKsEKRMBXhBdAkGNd0MbzQ MnQgmGE8C2u8iGZF9TQLNAjVSBynDAum80b1JsmnTpkqjYrqaZShgoExkgMv GWUwJGWqz8LmLKBRRcJUaZSh26g+okaZOLCb+oNPxu6LOvyotOQuO3Aa3Tg7 NDby6eXl8AgT43wQLJojB35lN+j7G1KqaapBj5swtKY8Fy7ZM0EPUJLtjBDO 1ZKdpCPuqrjrFhE8VtYyHdoVx/X+LdlJ/H8l++5VjR4zYFeu9T4ogovsW7o7 OeT8b+p4CkPTEI9hmB/9h9njixin6BYiQaX8t7QW7rDXTXlWxKMguDwBmIMc Uv5reIIg/G3P2OH9FPTfjXpjOmcR8JQtrtO+eoFkf7dmtGzA1rBnbMt9fsbg TrSRSobZbOIF901LyJIuwvYmI6I2yNptOBbWS5On2fGGhpaGqelw2Q8vL/1x IqWCkAKKf/AgMqULjyVPOQaX0XixVd5EEmhSEPwtRGofErtPFEO8UoJH0rd+ POTSwN/hP+ESCbzWotP/Mwp0x70c4DUcFK/oX+ofeFEF/6H90eB3j+K/neOj 3eTXF/j8gi0IZ8YzemZQGdkXoGp2ICoQ4M95V8+FUy+qyMdkIiMXF5L+n51h /Kkv22KVYpPX4LE/4ipc1D5uAoQDPoslZrutd5HOEl20WqiLLUMcpSspxcWM fkB/5qJOYt/KDDEw2AvSnc0YhOz3/X6iWGhiTZj+i+PtvXd1BpckMj/Ck2Mn wzhCTBYW+pW1BM5DiPzJ8cn20TmXemz40cReQtAXAkWdzmCUoype5iT4It9m R0bid2hoUTKOB6uUjtkSanqeborBUpiKdh8NvYwj5Lvv2HXArGinQy8iW0O6 KATcMHoF0TNhG59jV/Eus/QpC7N/d+YkEeHXY2hFUmV+aPrTH4d4B6pPK1Wx ucBnmvaKbH6efJ/HjJeMQK02jkB2s543uFPhL1nG3P5SPvl4hmd4lxzc1D9s 6Tjitsx2Pf/wnvFd1Ff07sVX9Gb6irMUcoU6iXMmOC8yYhb1tug0Svfl3586 yqLASxPcEsW16TSubc7nOkrS/dE3m4deOTfy/yTxy7Hveuv9sOP2SQSzWvdK CGjikTq7B3sbtGyiiE0d+m+bxnz+5BL7P4OZFb6lV+lbzlaSdHx6BE2R+ZqP oy1VTot3J19zTrIu4msuxGS5r7k0H+QJsFHwQXqZkqQ+yLeS4XZm/ukq5w1U CIaTiGafCtduNOnrlcSA/DlvdioqVeZMVg/jnBSV+Ijuw9sK9wE6XrtdLjB3 cRl69+Iy9Ga6DBVpxYLLsADP7hpXunlYbXlbbvRgAMNzPO9AwmrFWITC1CbO QWROWhyL5yHsrLG4nGqJee1VjsWzSZea6QcQQdnY+3TEUKDo7LE3+TcjVrCI 1C0WK5jF6aq+LTkG9DgsXcgXl84tmk0Vb2luqu1sbrEafRjHUTTXqUMVy651 Thx6UZ4/gn1JNz+XehRne2Ui0U3iAU06DYG/QjzgcVCdLjO9x/5+CVIiC6aG smC2irLgLYlAtU6fqkbdm436Th1ZwKOv4a9dlIWHRvXOsnBngpTIQktFWWiJ h4t2sb1SctBbScsJ8q7WyWPVlxBg+yz0G3VvZ+P9roYg2DoKgq2LgvBweNbg /kOSpEQUbCoK9hMVBW9pomDg+GAb7UcRBSi1TGlYAlVk0qCreGkA/k0HiRU2 X6867kKyG5lWlGxexho6nvBc4oYLGztrzKKTifPPNvn8OQm6/LR7tHu6v22Z DXT4vg1HcTAI/vSdCP4wVuLjyI2DqBv4kUPd0rGLB7b8LMyp9T8aEtKif2k0 Ct4mF5AkliAPIhQoOA1IT69TVS3TBCZYTTW3kf1ZMkF4lmw0fY58kSuLqSKf TE2VKEvZ2uo8fDr7SyvLWU1labZQWSxDoizPjAnPQ1lm8qVEWTQblUU3c8py J07NyauvWWPyeRM1OZWqUAsHfat40M2zZc2T16MFuVWiWEYTFcvUMsUqH/TT INyCduwbkbdRZ4yfCNoAR3P17oqzNE7oiw//aiMPNlMTGy2Y1TYzNXnShJ5T DZ4o7UuEvokmy2y2qoX+7P54cfbMhX46YV4q9C3q47Y0tVronwyhn4XQz6R9 idBb6OqaWZK5nBdvl+KxSnnx9q5Cv3xaTq/MF2hZ27PgAo8XcsFfq1rgnwyR 6wn8U6Y7CvfGxqurTmcjHAdXrzZegS524Utg2NYrFlHbGHgruqpp62pzXdOJ pm8a5qaub6jJP/JSNVSV8rCyPv7XJKq9aaqbmparr0N9qeK1FUM4ewR/5o4z qzqmrOpMsG9epgG+6oBg4Txmumm5DDBbDaTLh9k/Bk/lnxr/1IvF2L//xT+f 4f9XUmpohobpfokJYjD+ZzIY5S6spTud/Vu/M4l9j56H0/PJJWhIp0fwLGuC q819P/b7HwlY3WGES8/DmMQhmUSFyKcz9iN/fO0i4DTCymCtEpWmRqyQwnmK 4mZx5b2tXPlDfxx0LLMwSUkrJDsLL8fJYZArSf11zgX+K/AnFMjMLnZAhbCD ZJkdRKAK/rme7icXk0I/GYcOwEgNOx9xy/loEvVYvhDtbhCBuel87PT9SCGX k5jsnp2Qa7c/8fGVe+0GfbxPkYHx3XE/8Md10MdmVom+XP5QoDMY5F5Nkq+4 aO7X49YoHK0Sky0WGLhqnrr5z03ElcSO/NVk/WW9fjopfYhKD3cs63BGxpe1 e/kyT012tvyz1si64nTvqikdjXCXsGWKDrEUr3lMDLQ2jQZj5FrGyZf8az90 vUY9PPq+i8eKGrO1ZEYXGaAynVhCJ533NvazQlDmIGhJb+uQlK/dthW8b1Dw xx+JxzUMDEAW7IuxBPvC+/pSplZ/y6OM+XUt1l0EU2qMcBN4Szj+CS85FC4c XeLQCF2vY2uHYdyD+QGVMBxyfDfxWOghlVs/XTBX5SaIe0RjYw7pJwNT7nDg OowSJF9bguRzJKWSL0UyGVoPJ/0cntHI7wRun+DENRjhcMnQhtbcTg+8N/DJ 9ncvireES9EMAMgqacoFoGVhgEYcjUr9FTX5jp1KcEg/hXKrbE5H/vnPf5Lf As8f4oSPY/IRHQJ+/SLewEgld6MuGqBVzs4+Dq2LGfp88fT2bqAPL7cyXSp/ izeWWRFe0iWlVZpV7CuT4ftheDNM14emhECdSc4iGeuSZfHBrx5NZmM8J8KL IQqtrxJ7bvO/KI5oPpVLYI0Ewbx+0JIZTjVVZT7ME+lvPTnpz9Hp7oS6A4FW ifXAerAcGcmhTEdizGvLDhr86ixzmcvzt4m+M3Hu2VbX8Kwoxmlw+C2Vi/m9 qypsX1aLAr14+OUcovByEQ3L0QXr/z2O3cs49vC24lkOaMu2GvcwssmXidsw 0qUbvmB4giZhwiOGrjeycWv3dgToDvxhHJGoF96wM2vpze1ecI0XIJDw2h/3 3RGbJI7DyVUPRjeLByh5E+yyd9YSri19M5W/LucMtDGDJbPnxnKGIOQ7mfHp 6IX6wnqZ/OyOIpw5JvzostKNmkEN7B2zWu3Hwb2GMK6tycURqNCoR4b0OGS2 mBxEAxQUvmSZW0oBXwmUG7ykzgRF0fc2CDkEMerjrRqRO/DJjfuRQXQjJpkw Ze+MfbxdIxog+DFxJ3E4cGMX6p7T2zrG4aV7CbLqhT6DD29jKDiYdHq1XDHo 4f1IJwKuySCFB8rnsxnAJO754r0QejM9tP6x7AGNP11EyHl8Q3na8yfjIIqD DtvMmthbZPHPNgOPjd6rLZnPyn+lRmXZRPjbutxR3u/HMs3F5gcyUVIXxjAV 3RJTOyWeJ78RPQB+XvnjTOXuPGWd373kGT9Ev1uMP1+LA58+jvoBCTI1cZuf NoymDvJ+EF7PmLQv6u8g5NmyWjpVFwV0frRwNn6PfE83Ey+R7wk1ZpNjUWXg lLGem0aUUabWBG1urQC5ZaaTaI+jFmWGexlZGwmS1A94IB2hDm+zpRiaLYR6 H2/0qBPc42S629JpgT6lO8tLI32lBFk87Pf3cDrfcFpHWLh1zYRFvwdhSWnz gMIykzYP4m3MGfNbqtsxP4p/Ic9jDkOKlQUFuftSycNY04wyVVb0b59sIZ9s DtNaEB/rmdjXMvGZi0gP47su28gu7MTOh/BD+rHSqEhLVfSWcC25oWuKYUhz GiRGI+nGNPcpOYrvMxrNRaBnaHizdcmZhjfpaykNX8poSB/VFTZuhZiwPYyp lgtbW9FtYdebYbQVo5nf+i6QYfajeQRKIMIzNMVlAiUxxRKBmv1oMfOVGutH s1+2peht4bppo2kphtUWJ+oycqbmvcS+S/K0wdY3lmDQaJVnODEXKFZ31wCj 2J3kjCstl7OHmbxL5axtgJwJ11MbLRgnbWNhOSvfxkCptlSTVxS55zK9LxW5 OYgnl74kp3+LPiZdsJtxMCSjEE+Sxp7WEc5u37vtggLrUokxVF0xVFtcbxJx zI57nDUH6Y7QquuF9coX7XrTNNpJmqOkLTX7vFt0oQspXPkpxEwCUJWyW4rR LlWpp0yxuWYfSyadVPg0UzF0tbjYuWAsidEz/eUOP9amJKVj5ebQOwvenZCC 1pPfiW2gothuK6baLIb7nzr97iaGyyakVDB1cM8M/Q5WsZDGkTP8a6KZ17OM D24AWnWTXgAFbgLsx7CZbN7HPP5altPUNMXUWnewnE+UqvdiV+cir1SIDRio mvps6yq2NGumUUV5plIvRT7Up/mjmOAngHkQxTP2usyeMUxhDkBHCv6NZXu9 HwQvuga15BNQGEdn2fl83pzreUl++uxOQ+F0dYlaLF1XTKM1e4B9AoI0rwot exR+AiRYSJfq7ph/tkpVG8GH1C7pgNVsKoZl3dN0wKuZ35Z2c/l7QLt4nMU9 uLJz4bb80UZ6oMgssakr8ZN+3iKbqmI2tXua8tyzjMxncp+nsNS2Ng8lNVJL Y7UVwzbvx9LUN4hJN+/B0tTbkze/9MyF3PJNDW1+Pqmp3+Poarh8lxWB3luP cdcLk3Odm8emqZj5daXnI9hzeqTPU8Lre2NPTtRrd/3hZF5q3HmA/pGNe9LP +1jVqLcNbVHZp4akBTPf1lQm+TMh4nyW5H6pKRXRtqWYWvHWCpkq0b7dpypR wlamsc0z2t1rd/FOOq76mnofm6myW+/mFgXZ0l5hZW8OLBHBJZ/uzHGb1W/Z ptOaHe8MwsQyt5gNsTXFbBcPk38GUl57oHu64j6fBXzOcl+bWQ+rADKzj/eA mdn5JBV97UhjcffRV6YaSz0Ijvd+WeIkjKjzo0ixay5reLsjW16/Jt1OOAiE 89FYZpJHLj+SSeRHJBz28fRRn4yCkb9BzSheZN7UijcvPSupmc8aPVvxqW2K HlyOpNbIMBXTLIbbCz2ecyfKwgFVRCeTrEUVtkye8pHUebfxLIMkCwVgkShL PjZgNrYl9JtTWhmS1HxpbaVpFCP2z0vM5rVffyl5q0echxU8qb1rqoo5fbTK Qy8dAZEzCVzq8dNTgvfwS0aA3PJD6EwMFloqgpHyyL/2xyTy/SEOjvRAIiw6 wYONLv2OC8MluYGHcdDvEy8c/heelkRGYRSTsX+1HsVu5z2DxOsFwyt6aNhs atx2+J0jr+cmx+sKeiDYRlqoJkF4NiczyUZTaWbnoj0vTbibLX4mKjGHJ/mX 0o08Xe5NSWTDR1OzlKYu7OGyVE2xdGN6XiaVxMHgFpx+JYr8+05opsevHWcX WBCXMo9e7EHwVLa+T7CLfI8LGQETYeaAj6KO23fH5Oxs95Z4buwyWNhORAhl gosXfuHtX6wzUDnuKdm1GV2iU0AgJXgsHMoPEJXsnTBI7GIKejAdbl+JNshR COJHb3/yiT+Mx4HPDogDIvVHt6/goze6ZT1QyE0v6PQYpKoumLQL2DZK9N7W zs6rvcOLA+hF1gHWvsKBRVjyI7lBMcd+X/oZtht19jABW/veUvcuJUfRJfLy so68VO3iTeRFJiGHh+8ov+djtcmpB/3GszETZufozBldh4agIf3lnl6RU71l 0lAhOZOBFeqMBdAR4CcmKVbeOzSv31c0LVLrZRgwCxN2BlrgA1jN9j1Yr3tO BF3QvKU2jVBIEYOTF/QMUpldS43K2fnx6e60XaPSTq1aYsxS68at2oRZNe/D hNszbJlB4aGcqaYNSdMv9GlztkxrFsUPZM0Kux/Y5PBX82xP+VXf2VPOq4/f z8tayRWElcJWJW0v9EUEThxE8TkYVwZDkD6Z4FUOqMB9BiQnfQUBqGllGXuj Xji+FyYXbUWV1S3Yisot2/eTUw19dEcRT51folGutsYtW2nahmCN222lpda1 xuhthFcK+9AWdCZz13PyvaiAZErRwaSfyH8t9ye8Wv7xU2X4Lm8gT9GFWdFn AfWa0sO6tIx7BIs4lgiODZMQ8SCJlqYrLV1f5gWR0z2plhzZ+nZ9mbmbAZrd 92opYH2vEoKXfA8+HhA/gtl27nI9tv1ByQ7ExuH2BuxqD4Z2GBbikFyyg+Dd y3AS0wPl652+H/nQVpLnVku4pOLSNhVLtcr2sc53Mt2icR4Bl+XHPBnwinA7 9yjAnwBvYmefORTLIcUi4SDe37vGSOvSopIMC8WNqNHRm0rLKN3I+8TFar6j 4P8i8nVXoixf0GT2zNLAnmltYfgzQRKbzfp+0+Lx4Fn+EvR6Hn8JOiI/dXGZ XhPDdnne0oLimJxqvBQviUe8peKh64qltwTxaNpKy5p9CfF83pE85i71iu4u HUv3j3jv6/hFC7E7WWGvdV5kXWuDC9MlPDeA56boEbfAI25rc5gEBnz56UaM bDUZniYmZAxvLtMSMCQf2RTQ/II7HiNaVyHrpAnMwZtFLraHacN+jMtrg4jk wZGeC4/I5QSv66ExHQTiIEoK6Qa3vpe7JmemTlPu3p9Sizu3l6XTFaO8aShW s/nos5b72wieol/Tq3xsl3IZ28brEqKcBovPV9qGYufPyXpGAjWva/71S9Zd KbJkEZPaMAtsmCWst9kayGDtbIHKTj/wTAWK39f58EVsH9c9SRFF12sJMxXa dol4tDTFalmCeOiWYucPNF/CTIX34D5nKpl03G0KW977RZwaFrPdDofX/jii aQiXfs+99jFffvyRBOOxfzXpu+P+R7q6JmQ+0RsUI9IZB3HQcfuk5499fkfo ufveJ77b6YlXLOICr4sref2PG4RsRdFk4GcXh6KBQXBu/8b9iIvBMcaE4Y1c KmxTsdrCMfc2eEK2VQi0Se35zl5myQsEnTbnCycW1fKWr2MH/o8iPfKKFqO1 zBnNddXR0ZLTpqnYC6vJ5XR8WZuO0vXmqjWmwaT/MkfX+gtNImGXfMh0kap1 c9cL1+RMn0+4Iz3NsVqH7yBuT0PSCodMl1Ol6ox8+UlbhQVvZqipcYJOjiJ9 lN3vmlzuKtxGzHNbkr1Ceyekk1nI2utSjOC0MXErRfWgxSVSFEepBWzbdB08 s4AtVbHbZg0LSNNFaOKIGIKf3xbO8p4Ews8loQLB7inYO69BzB+/X4+sC5vG ekPMAiKI0jcrnU4iffdgDJMBpswY5kk5W/QkZvFuRpIR7H7yuu4sfbOpNY8j mAkUs41RAOMDATlVwPNDj4xVx2wrmnIFPU5LQYm0FGUJFiiCwgBeTG+AH01i orEMsCjJDsBsMJbqRROz2AXXQlKXVVPSg2R4CxJvCqddMsvZgvllSxMnnGBK 25paw3LS6e9TcR+nMRYEtr1EgQ3ux4FMiPnwPmQmnREVdDIlwwsIXcSFrr1w DkpLhyHdEHLd2rqqtA39IQRzBi3nHsqnKfO3cNYQTgRRMJ9TNjb1Std4GjRQ fovCqesV5C0HP/FlKV5py7CUlrjG2DaaStusMy+vKcJ4Rew8IrwM2ypc7rRM N3Ru0Z2aLt1FdAVCVs+uFrOrKLbLsauU6nNP4aXSaZogncKcqd0EA2st0cCW SucsovK7Fxa2sH+L6Fwi6iVD/5SEKoKvyu+0yjYZtOcMQHnp4IdGttIzmMPG NnWl1RRyd9oW2NhWPRt77z6CMfd0X6DS/bgI9+UhPKbv6iU2lgsw04iZAqzp C0jwKqu2DANsqUrLEsL2bRsMcLueAV6i9S0s5HDju6joZlJrP6VY6sJSW9vs zhF3nSf24ukjwWra9xm+lwtpS2m1dEFI26aiqapVJ7Sa3453z6HV+QVWoO1z srXyXY4PbnUp9US3oa7VVb9Jd8b81vtIghgrd+HtGBdAh6lF/+cCmoIaIhXj FkzFbGEqpqmaCnKs17G288nxnHa36PMuJsRPYwXrPuS31P7OzkeY6TQEs71e bV5/Nx0N3wH8+lGwWg6DDTM2uy0Ksd4EIS5uqZGPdfu5tK25rXDdMxLrCO80 jcQpm7pECb6vgBgn5j3a3lmSK11tuJPk5tlyp9htu63YqikKqtkCQW01lyeo tUNfy8gSoHJ6P57t40roHazrtIC+zDwD7wMVUGinnoBi2FbIWp8n5ENbe4ZB 9Udx3hZnUevOLLofH+URubN814T9V4e0s66qslVbsfN3ZC8td732WfRCP+9l M0TxLp86weo7EmGRG394T+9rJ0T5jUY5Aix04QAbvFttGLxze+OekzDNm/b/ lUvVXcmxTPGSWi4dLJe48A+iB/KnzXPMzeKXfC35eBsofv+bIJKzU2pgO1d2 3ZyiuNRNEPwaM6mAGJZii8vqmqbpICC6tuRtEPKr1KrH9oXlY+nbIHjv58l+ o1VW0qwLL7iOPBIHg2B4FW0Q+jtiwboo9sc1JUO4eE1deEZpm6ZiN+/nRBpk mdaqLem5u8X0pV49z6A/7uAzJykoV+/FrSm/Xu2O4w7DkBkO3QTDYVj35dk8 gFzNO5z/BQTsriRZsqRJ7Rn00rbEUK5moig2Jff1zN/tBZ0cseeGWXsMg37I fRx9mYniDNt7cXIom/iwNxfCq8SoFySd4Wjw++CkgtLSFbslhlK1ZgsExbKX 7OzI76TLS8rCgiHIxCLR/fLuVrI61cCa0aphVDhFpfTf7M5X/yuPZg2jGtUL VBFCVo3KyvOkLjDDRTY2Xl11OhvhOLh6tfGqEw678CUwbOvVaAB+YTwOhhu9 FV3VtHW1ua7pRNM3DXNT1zfU5B95qRqqSoV3BgT8r0lUe9NUNzUtB0EHCDL9 0BSuG9+SVy/Idjj6CD3txWRtuwGyphoK/jXp3yb9a5G9se+Ts7Ab3+AZunvh ZOhRWVDI/rCzwUJw8O+8h54uHscInyN3HOMGjJ+2t2kJqokKN9a1m6Z/W0vp gIwWhqoYqYv8H0F3CEJPnJPDw/2j89P9I+ets3+0fXCxs7uD75lGlL4HrAAE heCcne0ajkOBDjv9ieeT728z3v137oWff0EpBR0z0x0ly+nYMNczeET88TgE ZcAnhY3WMT1f0x+6YMu8VSzs9yMfPhnnfvPJ0Pc9QtsN2Onz3XE4oDsgARw7 SRm+kJ7vev6Y8iR68WoxelQrVXxnpZqCsHylejAVehyFOZ8hlyXv8wozrTGj giAQEsWARQeKB8M+hewMNN0O4BPtenA5iX3HWVuDn/QYAF7McRqNCq26U++H +e7n1GrpegUGsq52LZV21RoIg/DGwFtQ+cTKC+ldenrV69couWTgdnqInudH nXEwooTHE76QXgIzIrwQ5/W0AvFxh8GbqUWvX7OC5XrEdDZdxV9qJ5muL62r MvrSLWR6s7CnTE+n/+AhJXsI/jf+9A9dIf9QP/9DhQ/9yyp9/681EPuyNUjm lmUFuGtZSEpVhAXIQvmSNNasRrEFIY/1j8b04iHtXLot4sOqnCiGobTFKz7a hqm0M8siEOXDV0aVCPNc5EQxLaXdFLdumTY8MAtEQQBIEy2jibYMmvB5l5BU NYsmvMZMmuzXoUmZpDTbStsyxb0WOjywJUT58KyosjOLKpWi0tKUtngmU7vV VNq2lqfK1ygr1cJig1mxRbNigwa1TRlZviJp0ZEw3gdMRZYP8XZTV+CPnQz0 mXn1lmFdxfOIvq1HoeRIhWqcaA8/CD0iawM37vScEC8qGnqbmNFLVLI69q8C XB5KXkBDb26V2yTkDqgD/lZzenh5bPyny88aee6dYnIJsppAwZYmkaClDND3 J0IeNaKl9DjbL6PGWBmn8tNC/Wm1JfLz2NgvXYDuSC+59LRQ/8RLhOCXBY+y jWecpN5XNWBlFC0ZsIACGpJBGMm1tqoq8Kc4QfC+wjErkTYpadqqgXRo503O 8kREYGBdpUtoVAerKiO8U8fotDXEX1eLzssTwL+G0SnIyH1TTC5BWhMpqMkk aCmqJAj6ckUInTlv0VE8FSAdTCzMtGUC9NjoL1uC7kowufyYSMCmLsjP+dbp T7vnuASgr6YkpanmcxGU0bNIA2FNrYitfzvCkGWmMbTNKoTN0pE6lQ/0its5 r/ih0KvN/nunhJzxlgmUaamzGP8QnJ92JqJqZOtMiNqtFiBom7NY/8R4v2xa yJmPzmq73SpMdbx5A7SLRSLLRumquKKenbVLibuQBSRkBY+zcgb++MqnpfER tNbth24Mahf7HAp7TujpV07k9wEDeH62hxlThPVfwgid7l0JBgPfC9zYF5q/ HbDmeV08orrf9/uARiccRjHgGRO1QYRfGtCi0WDtydDUpGiqSTM5SI3GHxUK QKm6BLYLM7xZBo3tKed62tYVXdWM6bnAQ8jiw0TF7y69yiPLr/JQAqw8pAgv jftzCL3MIIP8UyWwa7hho2h5YxVyfZbY0lNq7+in66puA35GHT9s+fgtbTS+ KynkrNcNII3ensl6bHyJpNFFmX29jH8UDue3qQJS2ZGMD4pUHX4XAqtLxF/G ZLOpmwr8EWJgZtPUFdPKTV1H7mX0/WBwC0YnCv70/3uaMK8rKJNePi63UMzv fknoXuVlYItw2MbnrcMdTEowt/JpCWmB5bRWSDelOJuucz0YhNfD+Fr3uqvU oMuDK1QxWU6zqJaDXFro2mQYjfwOlv6XOHTC79L8z/pj221FCmrZiPoHDnzS ShdHZye7287h8a9H50khQcnMLUaNVUqdSKZkKbGm9ziF15LRMT/WlTKENrhs ZkwBKCXxcyNXIr9mVEWys0qSrSS0OisI7hkV3JVqiUXXr0piV2Z4fVxGabH5 yCwb6hck81kdqVwaiadqVorj06YMTBvGH4IKwoBJKw1N30pVltYoUok+LJ+2 1rOvOEdJZS8f5qoJwCgDUGI4Us7tvjs//WW/inWUksg4A+cfwlQE/jcqGVjO vfP9Gtx7Jszb/FWzftlHFs5luvMcqMWAwjzwPggP3/1x/KQUp2Rqj9VLaX5n takLwFxU7/aPznZPz6s1jzMDWW+iskn0D/43K0VB2CO0sDQ8c2H4Y6p+ngc1 WVBb++qQ/EVlWjn+2QhH8YKJ5fnqC6WWpxsdXpPjEc/GD8c0GX9/a91gefgw Q7JMMgrHcYSZ1PiyEw5GQd8f010U3xJZAneNfG3abtUGjdc8uTzNtVh+N+fb hFWnyyUxMkVXhRk0fZAdNHrujq9A60597D45dKP3a3RzBc6IzyYj9vTwHd0c wXZI0L8G3yeB3y4nQT9eD4akOxmyOSx9iTEDQrd8UkyQEC/JgOo9fJG2C2qB cl2jXZw112yXGp/BKBx1hrG84ZPjk23wLoWWCzCQyggA2BLndp2gLKQvkv5E 2ODQHfj9j8Rx6NNg6CTFFMmzPu245Hmf9969HMi7vvXj4Yx+b3nX7rDje+TH AOsMg9Gkz17SyrnYgwKgbnoBvRuU7XVhZKPd6//ZyWMfKXn8KfH7f2Z0mJsM 0oeUOAAqewWNKPmf/eJvSjhCxQ1sNmjKQJT1f8Mk78i/AjJc+6nsne7+dLJ1 eoiCfxHRLUEkMfegalGEd6rSmwaHmR2AKQxiDRNrtL4zjK4r3wungeG0NrXm lOGctrslEOYyvaqQUKa0eBztpXTD20yz9JLHd8rNUlICN+ZgGYQXcXivycdw QjruEOjsAZ3ZPik8gRlo+gqoCzQNuh8ZgADPbvZ8ZnqBJYPU1P50dEF+oiLf JyeTy37QIQdBx4dxlbjQG3wS9UD+LzkkrFOG12viB/SSSX6fJAGrAx1Zc2Ps 65iEdAzgY687/EjPI0xLT6GbYUWvUsOWe+A5sJt16YVqIN2XPplEfnfSV1hd KE5+2z9/e3xxTraOfie/bZ2ebh2d//6a3r8WwlsfZJACCwajfgCwAQvwRmK8 lI3BONw93X4LlbZ+3D/YP/8dcdjbPz/aPTsje8enZIuApJ/vb18cbJ2Sk4vT k+Oz3Q2w975Pb/VlKJSTtUt5M8YtVrEb9KMM79+BoRH0sY9Xy4Fujf2ODzrm ERdUZ/RxNss4ZfshKBu9bg4o+ZpErGNMxLaPT37fP/oJ+rvfxS1/CrkZByA3 cTibvwppavDSHb7vAz/OYigG9feCLrS01w/DMefBj2EUY+nDLaLqmqauawYM m+TibAuaffGK4QsqswVDDkGvMwBM/NuOP2KtBF0q24kVjVE/hA2F8CIOQQ8m 4w7HmG4zTLwGlFVEXJmu6IVQDPc5XuJR5ZHf74ICTRK6IepjP5qgGbzit/jh dki8rvkSnRIQVAZdzgUGhbNig+t1ilbWeC+8ARkcAxrXbj8A0vpUGej9rAzG 2HcjNJI3PdaW0BeKx4Damco+MUB58chTfx/E3x+APYb66VZOyo1u0GFjHOdA qn4Ycz8Zh1djMKWgtFxb3OEEaHAxQkyUTPc3btPW0t2oW7INqy+zDa0l70UQ zP93HHwm7BPPrwNMb2h9yTe0JtjfcUPry7INrRR+cUPrdRh4dXazwjA9GDiA he/ChweTPnYv2guofKLwfbEI6Xcs+4nSPxu5A9fQecgRqtIa8BfXKBq0Cq5n fFlmByOeBJDvX43uRUL3zGh29+bYEMx6iDEZtxM7UQBTi7Ws+jtFgCX0cuzH k/EwLdkodpvGeMgaIyd9/Y71XrM+BFPdT8U560lAu7IGtfYVctAg/4tT+urm gqy9tXcNXrGxJAKxibOEPguRh0/Dsw6n9GE/SqnDKmbE+b0efZIwWIFC6Y/f C+Si2j8Edwg1P7UgmXnK3skMEJab9k15h6KNjiQM0CwJAxQrpR6oYW9qdi0P tGXoJnieunDeFH9kZOdNfWErsuQLmzcSxG0vBL+ii8M0WbttwNgCIwe5RUdr GA6HiT8PYx0Y0WEHyyTjBcEReQ2He8wvGTtCeWcE7t34Kj2qhksK4uk5yczS 6bj9Pq1KI0O97pCxE/hI1s5Pd3ed899PdhkgdCFWspOayY8X+wfnwArn/PTi aBv4CoXAJY2pRH0jNNkF9BzadfjrDiNwpGFsc1h7YKhg9Oj0xeqcOlIam6au wB/hKjL8BY+sChpH4HLB5G9tZ3f7wNmD3p7vHx8528c7u0nzKZk+8c/trbNd Zw8Q3DsiaymqB3sHx8enjc3qQoVSGY/7dZi8t/+OkTTPaFKX2Ssi2Sm7NbKW AnV2352cKkTgrfA1oQVnNXVZAerrtAOXMLy8T36CtXDBJdtMfn+R8b0b3Ppe LV4XtBjxXI8id3009qWabJVosqxips3tTWN6RioN5aktS9HU/G027FF2mw11 TtEnH/o3yJPXuYfXPfKGwMzcAW9y4js98FjAZVjDgo205GUY9gkSowPvr8Dv eUO6LvhDSNWsAHqk4wDmQkC5rAQH8evuNpMLhVx1GuTFNTjOEZT6devgYteB +dLOwa7z68XZ7hlZu+41SuvFtOLrMt3TNAMPzzPFTW2a0cRj0oSLrBM5BYoA 2uTbNwTEAL410reoZPQAtDzWYCEY0isrOWw/vwElca5wTug7AxxokrdJIwyj lRUqyRRp+ubG7b/3xw0pD3IVM2uB379kiY18XFzhOrw/hEkJzBNhtgf1M56g OMOUIPH+4/FH1GMUfxYzdWnYJll2d69ccEi5XqfkElFuZKU/UYJQaYoHI+Q8 Nab+eOhCK2vbWwcH0xpNBSw119jXcKQq+Mn1TmHP9AajNzUrg1GyuP/pm2SR /wzG2xMK1Dk6PjljpV6nr2m/y1iDRcV0AW4U4HEC4EuGJjcdKVRBMoQ80+uh A/bz/WTk4GF3nkfZmKJ0dHFw0HgtNybbFNZBeDWHR1Cow01Ie7PZ2jTqhaRs 1VBsVbz1HR9k+9tWXhCYGK/3w5uNDuUaCKcDT5wks6KxibGATg+H7A6M2ev/ 3eleKSza5IVAcDcOx5GCoEYwsxee8aClDzPAEYFKMCXtYmSDcQFm0RtsbMRo 2LpqIjnIaQAkH3vkpwkMzxgsIt+Pr/j3HyIwDRuez6dRKyen1MStY+BoEPxJ J6WvdNOy26VvDc1Q6ZUUL6gQr9PlP0Scrzk5/geYrTojQHobiIABDnD4dn/a PXW2z84JhoIw0gXGwYNJc4Qza6rTGwwmlcKg+xEhdlxMXAa9C/70UVDGdMAE wOc8XjCMMP45jGksBusntR0MVWBYxemj9QqH/Y90xsr7GJH4JqS0jXvIBBqX WsFA1u/O6e5ehMIL5PpIsPc4y5XpRhKAGLjv/YhiBDNiGneACRuNjIz6bifB Kx3OOp0R4jZwP176DjUDYbeLy2Rx6FDiOGO/CzgeBO/9myCi9YHJKYc1Qv4n 7A3JjnsNU8qt4RWGisj3nnvtb7j01w/DcWe9A382rjobHZefAQV9GLnY8sh1 onDguBHODoIYL5iis3Noc3cYTcY8/scENTmtiPo3sVQ92mpbaWviQSe6lrt7 PvoILiObaFO+AFEdFJToxh05nY4XOKOgA61jWHv1bGcV46JUqsZgYWOEgBG9 dMk6J/LGOsyHyQ6YD/e9CzrTI6fuv92rcARcB6LQ5xvj5NEP7sDbgC4k4v+C sPA1EKqzSbY6GEkil+644/fDoYv9cEliCWG0SDJON8S6wpIjKgHwfxx4mGWf EFVkJNTyws4rkKHwvb8R+7dBCaMZXofwipzFExgyyPeDcfSDOwIxZBgkTOW9 8NzxTTBsb4B7vHV26BxfnJ9cnDtbB/s/He3ugI98eHh8BJ3Z8jz5aU9aywQX oNUU4+8ti27k1QVDx1sbRxbYTN7oOjBqMNoAgcIJIv0R0tkwSPWE2gEcOaG6 47BokcPCbVAgdjvv8aocFIu+H9MgtcBdHUz8ylt3HPVc8j8w4EaBu/J9j/7e +Df7XcZSviJBN4psDDzCz5x3un3vtuu8t8F5TR/gT6ybPIniQpEozv2k41Ty YxBe5yqDnaJH+2Ylkic5GPBQgMGi6yvC7wIM4TIPoVtXw1y15FDsrIRwTHb+ YQHjUTTqFKrio+xXB9BkBcRq6dMcfPo09wDGs7RYrj68yBWTAAsHTGwxSi/o 3/JkhKouSsitbTmR2+s6mkI6g1F35ARg8WHek/2MIp8ikPyGuq307aRQekKL Z7+wLFZGuxcB3vjZC7A1/PYh/QYGcezfWiZ4CMEtm3FHwLS08fSplzwVC0bF R17yCOsijiDxnRtsjMYWYQjt6knPhScMCP72hBK0/exhVigKvCkwHi8hVCoW 8tJCBETcCwxHS5CH3xH+ptWTH86f/m1M3/XoO/z2gX2b0K/iY/yO6TwUwoTC j5NHtDh0Mf1deJ1/mwEwnB7MDnARMennhPctfZ6rkXvDOh/JAVHRkMIiU48Z IGSmZTpRr++lzMUfSID03RhIHX0YxwKXk58Jb5LfTJrxl5cvnPIo+RGksgwP 2A41ENEciNuuzr4kr2/l9bz0xZSe850ddOCsY9sDtgEkPZdatDVB4XDt1MIk lXLHsctq5gsUq1+Gca+yer5AsTq91qyyfr4E0OoI5q4lB3VTihWpgv3HwarY NDxjl6px8tO278XSTnOMxi1lWI/C0TSxYB5UIADWqEODS3AdO70U0GgS9USo 17445gQ42OZHKv7I2dnPlxr4g6ma7BkWFQHAoCtS/hqLpQ/A1b3nQW6a9Li3 SC7wg8FtXyLpUCGS6xZUYC+jXjiO55DRe8ZPPKO+nryUeAYMVsoi9hODQxwW zXDEBEhKlKGXez6BSZYEODv9dpOcwbQUq5J0YQkB8yZw4sPXYhLQydLMvdGP bTormjv+NMd+3Lg3GMnNY+7dVK3UIcxXwMfFsuAol7aQvZvTLLDeZd4m+53A FJ7jz4dTzWTTs2QwSl9lBEh2WhYJkz6fAhBMwybJcbUlbQZTbbLS+UdeOQBv qjS7hF3S6dzl7CmA6WuvWZu5a4a5rZnB+DItZJRHvDIMP7CveOKmyICAPecv sq8f0ppe9u2DSIUgJVUKw8tgsMe8OD28hL3IvlJKpp3yhLKjKGN6mROVmZcH MLzTd5mIw0X5LTjiWDN92VsBRsltgXN4RqwjYqOy+TJrarrxpOBDTE97ZC1L zncujpK4zuHxr7vO8cn5/uHWAUd84HbGIUOTzgci35kM3X5wNcQFvPCahaYG bp+Xp/Gty36Zl50EtmbC2h2y9CkYsSgWA2frcGdv65CHy9YChMCD45xvFMIg iChERkaWIgwDIM8S9gkUmoy8V/SDhlmxhbQXhIGiGUQsxPgKM2GhIyNwbgOa KIV8YkOp2KN741DSyDQ/eIHtkwv4/8ShK837R2ci5tjLXJhxh+VyCFV3dve2 Lg7OnVyxNUmBo63D3QR4vvBoHHb8KAIWoOfBi5ycHm/vnp0dn2aMW6mQCfRd RMgsWooLap3RJO/M0M0qCCbfLia9TdOR9pALE/rTZOT7o16I+YdInAKRp6SW h3KhYxFPOsda6+u4QrCOPQuzI/dzRCkX/dSSdsIolmnN2qCC6fDu/O3B8ZHz s11RCpVjAupFJyNs9o6TFIdtXGUPQAVu2bfJcBzCxAmmDX1/mE79Me7G6xre MLxxXPbDAwKmM6CkoSjAlHCnG4SjFACwZxDGvvPLPr5jZYNh7F/5Y2dnj5bH JqKsgjuOA7cPBvYKWhnBbB5vP+e9ZVtuQb3ZXqUohrmeQpKqbqeD4RF6IM0k vgpBaR1cf2WV3THU4KlVXej4R5p6kEbQEmNU1T6+RykDwYnY5DnrNxKgi8tv o4wgwbADIyX73Q0nY+ffE/QQg0EQZ23i1U+Tvp/VuuRhGPAebzu9K8265MyD oYEt0kU0gYRL9CsPrF1iJvM6KVk5ENWLCh8qk6BDdL+AE6dyiFOJyUiiyLnm iD/EpW1QvrxKgkV1IwEas9hBFE18By1xuZnISrvevycwD+SKUmrVFrW9ZUoK JGOtofmp2FGyjjtV6Gp2MZW167sxLn11++7VRgoKKrAdJg36It1PMoxJAUhW h6XKQk26lagxlTSba6lsMGHY8GQ2IYU2uSnE3Cqfrk5bv60fD3MbYwgbBAp7 ZxoVk9QiROm5IGDrWPKpQniSrEJooqWSTFplTTArK+90YTMV5vUhACwKrAQb 8SYV6hJyCltSyrHA91HQicpW6LAePJxgLjffuDSkDbIhiTIa3MXLgULSfVx0 rl5YMETALOhZCjjrlohxuiyI+oLp/5fkt6AfhbjwexlebtzQHz+4ncFGOL6a WhvEJiOXf9CFdVxddYfxKAxZvApX6c7eByOCVoicXfx4uvtTtCHJwMgG2TlS uYqV0hwMU9tU6yVl6lZb0e30XMvgX4bZtFp/2Nb6i/UXNLcExnZq798g3/EB TQx2WFp59GY1EwQyGNDxEb4JF5ER4e4xeoUqz/MRks+JcF0Ynma0Qk8HYpH2 R+0HJtpDHy6D2OndwJs3H/0o7V/gJr2j+ys5IfmS7uMTkrhPj6hTfapJYOnC uq62FQ23tHLZXVn5D0wOPdzdBCNmmSzGl2NDskfpEmbt/X54A2MZDqu8bh+T AtYHhk5rZoTaoO9pZtu71f/8hA6vA3T7sgoWjuL8jl9w+vldB7wh/fO7YQia 6X5+BzDWLfPzu/f253cwlPrjcPj5HZvr4uPkqstbfuHpa5Zu947/TBp6w8Hn Cr3ghfxOLySrF0NufgEjmKngxjK69SVzz9/8ZwJOIVlZmiAUba4S7b+/43c9 M4C8SUIRIgwfwtAh723CkSEJLiRFhYNifbsFR0HLdduP3A7LgUi5l2ZGPlXu JYPN53dpBsvXxtJ0tM9ydO7MZelo09Sait7UhWSY5JFwshv+e/2afw0szv3P JGhl1pT9o2z9z0/cYR+GwzSz7QuyNzueIUFw/cXnFEUEJJ6lkTInKZx7m3YI /723ARAnD3zj4SsUuIZQSgD53s49Lzn4Tm82kRZWjjxNGx9ZJeTJ2/Ovkyqt dhOHVi0z9FzE2Nf/IMc/868AgUr86iqIC0jw51SGP2dS/DmTY/jOFeEz14vP hOtJQwqdfklGfBuPVLDVVmbCavUrVbbPgrrdb3en/U0xxXSOpN/pagvk/QLN dCCclnqd1BNBoU0zRTeLj7aOftplL+gRua9ekOMk5ZRtdTTIwP2IY8Nw0u+z 9HGaGJ3sADs+cc62DnfJmtrgjsp335H0oZak32cPHdyM7WDWNFnTq18bDZZY zaWCIpdut1k+cumxxEkeMGbR0xRXUG/Pv01TfzHdFoxzwNM+MduyG4yjGEOK N34KBmHTbdte0O36uPmILpxGdEt65A58Dg235NSlLNuHg4cXdaKYpS7zrTTH J7uA8A7dkKMqRGsoTDew4lQBDQs0BM/y82eRaUvh2rRy5HOK51APWcWcghj1 9tZYuqbAH+GUW8z6/zaJGf4JNmJE1vx+zHOcG4mBDbxb8oZQstPToy6DIZY8 Obg44/sgoIRCspoKURkV8BRYcQ+cSdZSgcXDEIIrOlFQwGZhwhIFQ9O24Qvj Dx7CSs84ZLwHDw15z7qJ75CVjNXQ1CuQBtw3QRdcnIuj/XNWkMbNG41s51Ny RzMniXBG7pMkCYqWg2IsfM0hMy1tWWb+HFP/YqWFpAzvlbJU4RhtPNqg3yed nt95H4FT2enA/Mz3QOl/RALwdYghX0qiB6vzLTxRnFgG+KDb73A3joRsXofR LLz8N911oKRbjKg8HO4fJVuU6O+d48Ot/SOy5rlMMpTUFsxZnEon5/3uu63t c2dn/9dkbxBWPdv/v7tcEFkfU8OUCfaUyPKSXGCnUNcA9Z2dU94Mx5yXyaSC yTdjhuDnPSdmlIr9giT5/0V7v9hjewIA --4266313884-669419637-1321439435=:26465 Content-Type: APPLICATION/OCTET-STREAM; NAME=bsd.cpu.mk.amdfam10.gz Content-Transfer-Encoding: BASE64 Content-ID: Content-Description: Content-Disposition: ATTACHMENT; FILENAME=bsd.cpu.mk.amdfam10.gz H4sICCyZwk4AA2JzZC5jcHUubWsuYW1kZmFtMTAA3VTLTsJAFF3LV1yqq9KW Tt+QsCCEBBcaYnRhYmKGdipN6SNtiSTqvztTWm2xCAosdEImM8x9nHPuveV5 HtI5Tkg38Luz1JHseCkFvhQl3tOZIiMksp8OyOhrSl82Jblc0JEVWW6JotgU oOZr9tUedf/iy9cXu4PWE3QN8isLza4G0JPYAhhN727vp2MYQEzCzFsGYhCs 6P8SAFl4Lly8FBZvMBgA5+mWwTW5tTrbXHDguDhAMgevr5tvM5zYZBGFmKP+ lZgJSe0oy7bjiOKMJFEopilRmwLjbE7DGtqnwQMNlq8NS99a29RJlQCa5ESq JSCtEBTgPLcmoU0gcgGzKOASnC0TItHnnENO4Go4mlxejx+pwfBmNCkEVZmg bcbzUJY0UyUFZbF+FldxcQLfBNUJo2dg9mxT2Aa04uAb4OvAyguexjaKa6f8 32H6IZwdSFjfIk2multl555Q9z1btr03QTwLGD8N76t8+ziN/59bonE0LSQg yyxHs56sgj90PDc/FkwaW4R2AcN8lNlsMKh8eOo4fatSksMEb0y7PeN6zCxd QD21HLNTavjLOfsQqD5WxxqaP1Krdxe5RIxnCAAA --4266313884-669419637-1321439435=:26465-- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 10:02:15 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A6CD4106566B for ; Mon, 21 Nov 2011 10:02:15 +0000 (UTC) (envelope-from demelier.david@gmail.com) Received: from mail-yx0-f182.google.com (mail-yx0-f182.google.com [209.85.213.182]) by mx1.freebsd.org (Postfix) with ESMTP id 63B818FC20 for ; Mon, 21 Nov 2011 10:02:15 +0000 (UTC) Received: by yenq9 with SMTP id q9so102007yen.13 for ; Mon, 21 Nov 2011 02:02:14 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:cc:subject :references:in-reply-to:content-type:content-transfer-encoding; bh=q/dZBQAFOLyil2jmHdgp6G1jC8NvBj9N5fP65ycOVLo=; b=Q2GdK04CiwdtCEeV9eW6NWf6rtUH2BHpA8fvs0sKJpd1nS6Bfbbi3Ou9scts9likGp rHEMGMhVF2SFDHPruhFXYkccGAFr5XZ+hxw40rwuNaM4sIa0QcpXUBu0TFNfdrIH40Vd N79PA+J4Lj5KYBhL69g3Q7WXCtDyENHmtI3B4= Received: by 10.146.206.19 with SMTP id d19mr2515361yag.33.1321869734745; Mon, 21 Nov 2011 02:02:14 -0800 (PST) Received: from Groseille.malikania.fr (197.21.102.84.rev.sfr.net. [84.102.21.197]) by mx.google.com with ESMTPS id 32sm28062134anu.10.2011.11.21.02.02.12 (version=SSLv3 cipher=OTHER); Mon, 21 Nov 2011 02:02:13 -0800 (PST) Message-ID: <4ECA21A2.7070105@gmail.com> Date: Mon, 21 Nov 2011 11:02:10 +0100 From: David Demelier User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:8.0) Gecko/20111109 Thunderbird/8.0 MIME-Version: 1.0 To: Polytropon References: <4EBCEDE4.7030002@gmail.com> <20111111120224.91d61986.freebsd@edvax.de> In-Reply-To: <20111111120224.91d61986.freebsd@edvax.de> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: No usb keyboard in single user mode X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 10:02:15 -0000 On 11/11/2011 12:02, Polytropon wrote: > On Fri, 11 Nov 2011 10:41:56 +0100, David Demelier wrote: >> When prompted Enter full pathname of shell or RETURN for /bin/sh:uhub3: >> 6 ports with 6 removable, self powered >> uhub7: 8 ports with 8 removable, self powered >> ugen0.2: at usbus0 >> ukbd0: >> on usbus0 >> kbd1 at ukbd0 >> uhid0: >> on usbus0 >> ugen1.2: at usbus1 >> ubt0: >> on usbus1 >> ugen0.3: at usbus0 >> >> So here nothing possible to do, only shutdown by power button. > > After the keyboard has been detected, you should be able > to enter full pathname of shell or RETURN for /bin/sh. > > Possible obstacle if you do NOT have "device kbdmux" in > your kernel configuration! > > > >> I have >> heard a long time ago that legacy USB must be enabled in the BIOS and it >> is in mine. > > I also had a similar experience in v7 with my old system. > After waiting for the kernel to identify ukbd0, it could > be used as intended for local logins. > > > I remember why I added kbdmux as module. If not this option will not be honored: makeoptions UKBD_DFLT_KEYMAP=uk.iso And then I don't have my uk.iso keymap on single user mode ! -- David Demelier From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 10:11:49 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F178D106566B; Mon, 21 Nov 2011 10:11:48 +0000 (UTC) (envelope-from olivier@gid0.org) Received: from mail-vx0-f182.google.com (mail-vx0-f182.google.com [209.85.220.182]) by mx1.freebsd.org (Postfix) with ESMTP id 82ED68FC13; Mon, 21 Nov 2011 10:11:48 +0000 (UTC) Received: by vcbfl10 with SMTP id fl10so2214878vcb.13 for ; Mon, 21 Nov 2011 02:11:47 -0800 (PST) MIME-Version: 1.0 Received: by 10.224.182.138 with SMTP id cc10mr5105757qab.30.1321868611837; Mon, 21 Nov 2011 01:43:31 -0800 (PST) Received: by 10.229.81.18 with HTTP; Mon, 21 Nov 2011 01:43:31 -0800 (PST) In-Reply-To: <4EC98563.7010206@rawbw.com> References: <4EC98563.7010206@rawbw.com> Date: Mon, 21 Nov 2011 10:43:31 +0100 Message-ID: From: Olivier Smedts To: Yuri Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: ports@freebsd.org, sylvio@freebsd.org, FreeBSD Questions Subject: Re: linphone-base conflicts with ortp and fails to install, it also fails to build: error: expected specifier-qualifier-list before 'UInt96' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 10:11:49 -0000 2011/11/20 Yuri : > Hi, > > > When I do portupgrade, I get this message (kdenetwork fails to update due= to > this): > > =3D=3D=3D> =A0linphone-base-3.2.1_1,1 conflicts with installed package(s)= : ^M > =A0 =A0 =A0ortp-0.13.0_1^M Hello, Please look at ports/UPDATING (20111016). > ^M > =A0 =A0 =A0They install files into the same place.^M > =A0 =A0 =A0You may want to stop build with Ctrl + C.^M > =3D=3D=3D> =A0Vulnerability check disabled, database not found^M > =3D=3D=3D> =A0License check disabled, port has not defined LICENSE^M > ^M > =3D=3D=3D> =A0linphone-base-3.2.1_1,1 conflicts with installed package(s)= : ^M > =A0 =A0 =A0ortp-0.13.0_1^M > ^M > =A0 =A0 =A0They will not build together.^M > =A0 =A0 =A0Please remove them first with pkg_delete(1).^M > > > When I follow instruction in UPDATING and run this command 'portmaster -o > net/linphone-base ortp', I get this messages: > In file included from ../include/mediastreamer2/msrtp.h:25, > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 from msrtp.c:20: > ../include/mediastreamer2/ice.h:60: error: expected specifier-qualifier-l= ist > before 'UInt96' > msrtp.c: In function 'receiver_process': > msrtp.c:333: warning: implicit declaration of function 'rtp_get_payload' > gmake[5]: *** [msrtp.lo] Error 1 > gmake[5]: Leaving directory > `/usr/ports/net/linphone-base/work/linphone-3.2.1/mediastreamer2/src' > gmake[4]: *** [all] Error 2 > gmake[4]: Leaving directory > `/usr/ports/net/linphone-base/work/linphone-3.2.1/mediastreamer2/src' > gmake[3]: *** [all-recursive] Error 1 > gmake[3]: Leaving directory > `/usr/ports/net/linphone-base/work/linphone-3.2.1/mediastreamer2' > gmake[2]: *** [all] Error 2 > gmake[2]: Leaving directory > `/usr/ports/net/linphone-base/work/linphone-3.2.1/mediastreamer2' > gmake[1]: *** [all-recursive] Error 1 > gmake[1]: Leaving directory > `/usr/ports/net/linphone-base/work/linphone-3.2.1' > gmake: *** [all] Error 2 > *** Error code 1 > > Stop in /usr/ports/net/linphone-base. > > =3D=3D=3D>>> make failed for net/linphone-base > =3D=3D=3D>>> Aborting update > > I am not sure why linphone-base build fails. > But it looks like linphone-base contains some version of ortp. And this > creates a problem of the conflict: "They install files into the same plac= e." > Sylvio, should you consider renaming conflicting files stemming from ortp > copy into some other name to remove such conflict? > > Yuri > > _______________________________________________ > freebsd-ports@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ports > To unsubscribe, send any mail to "freebsd-ports-unsubscribe@freebsd.org" > --=20 Olivier Smedts=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=A0 _ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 ASCII ribbon campaign ( ) e-mail: olivier@gid0.org=A0 =A0 =A0 =A0 - against HTML email & vCards=A0 X www: http://www.gid0.org=A0 =A0 - against proprietary attachments / \ =A0 "Il y a seulement 10 sortes de gens dans le monde : =A0 ceux qui comprennent le binaire, =A0 et ceux qui ne le comprennent pas." From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 15:15:16 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B128E106564A for ; Mon, 21 Nov 2011 15:15:16 +0000 (UTC) (envelope-from DStaal@usa.net) Received: from mail.magehandbook.com (173-8-4-45-WashingtonDC.hfc.comcastbusiness.net [173.8.4.45]) by mx1.freebsd.org (Postfix) with ESMTP id 126968FC0A for ; Mon, 21 Nov 2011 15:15:14 +0000 (UTC) Received: from www.magehandbook.com (mail.archersrock.info [192.168.1.100]) by mail.magehandbook.com (Postfix) with ESMTP id 26106820 for ; Mon, 21 Nov 2011 10:14:56 -0500 (EST) Received: from 152.121.16.252 (SquirrelMail authenticated user daniel) by www.magehandbook.com with HTTP; Mon, 21 Nov 2011 10:14:56 -0500 Message-ID: <88f3d8e819b3420f8e61723bee90ba5e.squirrel@www.magehandbook.com> In-Reply-To: References: Date: Mon, 21 Nov 2011 10:14:56 -0500 From: "Daniel Staal" To: freebsd-questions@freebsd.org User-Agent: SquirrelMail/1.4.22 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 15:15:16 -0000 On Sun, November 20, 2011 10:34 pm, APseudoUtopia wrote: > Hello, > > I'll be setting up a server with ZFS on 9.0-RELEASE (when it's > released...). I've never used ZFS before, and although I've been > reading quite a bit about it, I have some questions. > > My plan is to use RAID-Z1 across 4 disks. I'll be using GPT, and I > would like the root to be ZFS as well. I found a guide: > http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/RAIDZ1 > > In step #4, it has you create boot, swap, and zfs partitions on all 3 > (which would be 4 in my case) disks. Then, in step #5, you install the > bootloader into all 3 (4) drives. Why do you need boot and swap > partitions on EACH disk? It seems to me that you would only need disk > 1 to have boot, swap, and zfs, and the other 3 disks only have one > partition (using the entire drive) for zfs's pool. Does it have to do > with the RAIDZ1 setup? Even then, I don't understand it because it's > not disk mirroring, it's RAID. The BIOS is set to look on one specific > disk for the loader, not all of them. It seems I'm not understanding > something entirely here. As someone else said, the BIOS will search attached drives. And remember that one of the points to using a ZFS raid is that you can get hotswap drives. If your one drive with a bootloader fails, you can hotswap it and not notice that it was that drive, which then means your next boot will fail. Personally, I dedicated one small drive to the boot code, and put everything else in ZFS. There are varying opinions on whether that is a good idea. ;) Swap in theory can be put on the ZFS volume - and I have done so - but I would not recommend it. It's caused lockups in some situations, which would have been avoided by putting swap on it's own volume. > Also, with ZFS, you can have an unlimited number of filesystems, > correct? I've been trying to figure out the best way to create these > filesystems with the appropriate flags (specifically: atime, > compression, devices, exec, quota, readonly, and setuid). If, for > example, I set devices=off and suid=off on the tank/var filesystem, it > is applied to the children filesystem, such as, /var/log, /var/db, and > so on? The flags/properties can be changed on-the-fly, correct? If, > for example, I set a filesystem noexec, but later realize I need exec, > I can change it without issue? Yep. As long as you didn't set the volume that has the zfs tools to noexec. ;) > Does anyone with zfs experience have any tips on creating a filesystem > layout, in terms of which filesystems to create and what > flags/properties? Would it be bad to set noatime, nosuid, nodev, and > noexec all on the tank, then allow each property appropriately for > each directory as necessary? As in, set the whole tank noexec, but > allow exec for /bin, /usr/home, /usr/local/bin, etc.? Well, you already linked to a decent guide to the filesystem layout. Following it won't get you too far wrong. A couple of thoughts though: One thing that might have been useful in my experience is not having / be /zroot. If I'd set /zroot/root to / (and built everything else below that) I'd be able to play around a bit more, by setting up other filesystems under /zroot. (Including things like making a new root volume, or excluding volumes from snapshots.) Note that would cause changes in the bootloader code from the wiki example. And don't be to worried about getting it 'right the first time': Because ZFS allows you to create filesystems so easily, you can play around with it. It's not too hard to move a directory tree to a new filesystem, even on a live box. ;) You can create copies, try things out, and then use whatever's the best system for you. As for noexec on /... I'd be hesitant. Without being an absolute master on what is run from where under all circumstances in FreeBSD, it would worry me. (Does /etc need exec? How about /root? /boot? etc.) I'd rather err on the side of turning it off where I know I don't need it, instead of turning it on where I do. If I forget one, it's less likely to break my system. ;) The one other place where I'd disagree with the wiki page you linked would be on compression: If you have a fairly recent processor in the box, I'd recommend gzip for just about everywhere. In most cases it'll actually speed up I/O. Oh, and if you are thinking of using dedup, you'll need sha256 for the checksum. But I think it'll do that automatically if you turn on dedup. Daniel T. Staal --------------------------------------------------------------- This email copyright the author. Unless otherwise noted, you are expressly allowed to retransmit, quote, or otherwise use the contents for non-commercial purposes. This copyright will expire 5 years after the author's death, or in 30 years, whichever is longer, unless such a period is in excess of local copyright law. --------------------------------------------------------------- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 15:39:39 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 31B511065670 for ; Mon, 21 Nov 2011 15:39:39 +0000 (UTC) (envelope-from feld@feld.me) Received: from mwi1.coffeenet.org (unknown [IPv6:2607:f4e0:100:300::2]) by mx1.freebsd.org (Postfix) with ESMTP id DCABB8FC0C for ; Mon, 21 Nov 2011 15:39:38 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=feld.me; s=blargle; h=In-Reply-To:Message-Id:From:Mime-Version:Date:References:Subject:To:Content-Type; bh=K1R2U73xqXVtbayaFoK8esr4XBncqHPNHPiGpGPZFcY=; b=tQV7bmaXByEHmhuzNXBcb/VU8fWQR0+SD4B3CTYGr9iG3hifkRAifr+JuRg5UkUde2WlKH92BO6jxYIZQGEHSJMJUlJaghm5TM3XgaVgwlkZTXfmuxbM/GmAJf/sQRRL; Received: from localhost ([127.0.0.1] helo=mwi1.coffeenet.org) by mwi1.coffeenet.org with esmtp (Exim 4.77 (FreeBSD)) (envelope-from ) id 1RSVy1-0009R1-K7 for questions@freebsd.org; Mon, 21 Nov 2011 09:39:37 -0600 Received: from feld@feld.me by mwi1.coffeenet.org (Archiveopteryx 3.1.4) with esmtpsa id 1321889967-1840-1839/5/31; Mon, 21 Nov 2011 15:39:27 +0000 Content-Type: text/plain; charset=utf-8; format=flowed; delsp=yes To: questions@freebsd.org References: <201111191054.pAJAsI9q087098@jau.iki.fi> Date: Mon, 21 Nov 2011 09:39:27 -0600 Mime-Version: 1.0 From: Mark Felder Message-Id: In-Reply-To: <201111191054.pAJAsI9q087098@jau.iki.fi> User-Agent: Opera Mail/11.60 (FreeBSD) X-SA-Score: -1.0 Cc: Subject: Re: AMD64 with 9.0 PRERELEASE freezing/hanging without any messages X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 15:39:39 -0000 On Sat, 19 Nov 2011 04:54:18 -0600, Jukka A. Ukkonen wrote: > > Hello, > > Has anyone else noticed a similar odd behavior with AMD64 and 9.0 > prerelease (as well as RCs and betas)? > On my 12 core (2*4162EE) the whole system just freezes quite often > without any warning, without any messages being logged. Neither is > there any panic message from the kernel. The system just suddenly > hangs such that there is no alternative but to reboot using the > reset button. YES YES YES This is happening right now on my little Atom based ZFS NAS and it's driving me insane. 9.0-PRERELEASE compiled with Clang (don't think that matters though). However, mine doesn't fully panic and recovers. It justs completely freezes for like 5-10 seconds. Won't take any keyboard input, doesn't show anything on console/SSH, but is still pingable. Crazy! From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 16:29:04 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9088B106566C for ; Mon, 21 Nov 2011 16:29:04 +0000 (UTC) (envelope-from alexander.kapshuk@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 184B28FC14 for ; Mon, 21 Nov 2011 16:29:03 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so9033270bkb.13 for ; Mon, 21 Nov 2011 08:29:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:x-forwarded-message-id:content-type; bh=I0nwtJshc81x2elaZqW+vLJ3M5DdEMQkEwbw7HHVa4c=; b=XC82guqIjFnCBFw6chYowRTVjeGEKr4Z+d0/EDpjbkQqYFGgMtSuPj4lpIYhT1j0Ny I/Ec2dtuSpIY8BGTG5ahvw+zvgNzg+jnLEaj/36uBYbhQLgVJjw/IYSr+2fV3i3igRKg hkPUBM9uKVPhjH1zzYQmPH0pOXN58qyVWxN0Q= Received: by 10.204.50.88 with SMTP id y24mr15102659bkf.53.1321892942875; Mon, 21 Nov 2011 08:29:02 -0800 (PST) Received: from [192.168.1.2] (93-127-96-97.static.vega-ua.net. [93.127.96.97]) by mx.google.com with ESMTPS id a10sm15969463fam.20.2011.11.21.08.29.01 (version=SSLv3 cipher=OTHER); Mon, 21 Nov 2011 08:29:02 -0800 (PST) Message-ID: <4ECA7C4C.4060507@gmail.com> Date: Mon, 21 Nov 2011 18:29:00 +0200 From: Alexander Kapshuk User-Agent: Mozilla/5.0 (X11; FreeBSD i386; rv:8.0) Gecko/20111112 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <4EC94DAE.6050707@gmail.com> In-Reply-To: <4EC94DAE.6050707@gmail.com> X-Forwarded-Message-Id: <4EC94DAE.6050707@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: re: freebsd-update upgrade -r 9.0-RC2: incorrect hash error [SOLVED] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 16:29:04 -0000 i'd like to call off my call for help with the problem reported below. i was able to upgrade to 9.0-RC2 today without any trouble. my internet connection got cut off temporarily as i was pulling the files. some of the files might have got corrupted or something. -------- Original Message -------- Subject: re: freebsd-update upgrade -r 9.0-RC2: incorrect hash error Date: Sun, 20 Nov 2011 20:57:50 +0200 From: Alexander Kapshuk To: freebsd-questions@freebsd.org when performing a binary upgrade from 9.0-RC1 to 9.0-RC2 by following the instructions found here: http://lists.freebsd.org/pipermail/freebsd-current/2011-November/029373.html i've had this error: Applying patches... done. Fetching 5612 files... gunzip: (stdin): unexpected end of file 137c71ff94c207e764b910e3b7dca9a4fe282e43104bdeb18af4377014033116 has incorrect hash. has anyone else has this error? what can be done to fix it? :; uname -a FreeBSD localhost 9.0-RC1 FreeBSD 9.0-RC1 #0: Tue Oct 18 18:30:38 UTC 2011 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 thanks. sasha kapshuk From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 16:50:17 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 40C5510656D5 for ; Mon, 21 Nov 2011 16:50:17 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from sola.nimnet.asn.au (paqi.nimnet.asn.au [115.70.110.159]) by mx1.freebsd.org (Postfix) with ESMTP id 62D898FC0A for ; Mon, 21 Nov 2011 16:50:11 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by sola.nimnet.asn.au (8.14.2/8.14.2) with ESMTP id pALGo4pZ069604; Tue, 22 Nov 2011 03:50:05 +1100 (EST) (envelope-from smithi@nimnet.asn.au) Date: Tue, 22 Nov 2011 03:50:04 +1100 (EST) From: Ian Smith To: Bruce Cran In-Reply-To: <20111121101201.6336C10656E5@hub.freebsd.org> Message-ID: <20111122030531.U72022@sola.nimnet.asn.au> References: <20111121101201.6336C10656E5@hub.freebsd.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: freebsd-questions@freebsd.org Subject: Re: 9.0 and bsdinstall - avoiding updating the MBR X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 16:50:17 -0000 In freebsd-questions Digest, Vol 390, Issue 1, Message: 18 On Mon, 21 Nov 2011 01:47:27 +0000 Bruce Cran wrote: > I'm planning to install FreeBSD alongside a whole range of Windows > builds for testing. In 8.x it's possible to tell the installer not to > bother updating the MBR so you can use something like EasyBCD to boot it > via the Windows bootloader instead. Is it still possible on 9.0-RC2 > using bsdinstall? I don't seem to remember seeing any option to avoid > writing out the new boot code. Hi, I gather not (yet?) Can save the MBR with (eg) 'boot0cfg -f ~/mymbr adaX' for safety, dd it back if need be, and/or use fdisk(8) -p, -t and -f flags to save, test and restore just the slice table. At least they're precautions I'm taking, really not wanting to clobber win2k (for BIOS updates :), 8.2-RELEASE or a shared UFS partition when next trying to install 9.0-RC2 to slice 2, currently 7.4-RELEASE .. % boot0cfg -v ad0 # flag start chs type end chs offset size 1 0x00 0: 1: 1 0x0b 1023: 5:63 63 8385867 2 0x00 1023:255:63 0xa5 1023: 13:63 8385930 125821080 3 0x00 1023:255:63 0xa5 1023: 15:63 134207010 33543342 4 0x80 1023:255:63 0xa5 1023: 14:63 167750730 66685815 version=2.0 drive=0x80 mask=0xf ticks=182 bell=# (0x23) options=packet,update,nosetdrv volume serial ID a8a8-a8a8 default_selection=F4 (Slice 4) % fdisk -p ad0 # /dev/ad0 g c232581 h16 s63 p 1 0x0b 63 8385867 p 2 0xa5 8385930 125821080 p 3 0xa5 134207010 33543342 p 4 0xa5 167750730 66685815 a 4 cheers, Ian From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 18:56:21 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 455F51065675; Mon, 21 Nov 2011 18:56:21 +0000 (UTC) (envelope-from yuri@rawbw.com) Received: from shell0.rawbw.com (shell0.rawbw.com [198.144.192.45]) by mx1.freebsd.org (Postfix) with ESMTP id 2D0AA8FC18; Mon, 21 Nov 2011 18:56:20 +0000 (UTC) Received: from eagle.yuri.org (stunnel@localhost [127.0.0.1]) (authenticated bits=0) by shell0.rawbw.com (8.14.4/8.14.4) with ESMTP id pALIuKmS063640; Mon, 21 Nov 2011 10:56:20 -0800 (PST) (envelope-from yuri@rawbw.com) Message-ID: <4ECA9ED3.7050507@rawbw.com> Date: Mon, 21 Nov 2011 10:56:19 -0800 From: Yuri User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:8.0) Gecko/20111117 Thunderbird/8.0 MIME-Version: 1.0 To: Olivier Smedts References: <4EC98563.7010206@rawbw.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: ports@freebsd.org, sylvio@freebsd.org, FreeBSD Questions Subject: Re: linphone-base conflicts with ortp and fails to install, it also fails to build: error: expected specifier-qualifier-list before 'UInt96' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 18:56:21 -0000 On 11/21/2011 01:43, Olivier Smedts wrote: > Hello, > > Please look at ports/UPDATING (20111016). I did that, and wrote about this in my message (see below), but command 'portmaster -o net/linphone-base ortp' fails. >> >> > When I follow instruction in UPDATING and run this command 'portmaster -o >> > net/linphone-base ortp', I get this messages: >> > In file included from ../include/mediastreamer2/msrtp.h:25, >> > from msrtp.c:20: >> > ../include/mediastreamer2/ice.h:60: error: expected specifier-qualifier-list >> > before 'UInt96' Yuri From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 19:24:45 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F0E34106564A; Mon, 21 Nov 2011 19:24:45 +0000 (UTC) (envelope-from olivier@gid0.org) Received: from mail-qw0-f47.google.com (mail-qw0-f47.google.com [209.85.216.47]) by mx1.freebsd.org (Postfix) with ESMTP id 8D4F48FC13; Mon, 21 Nov 2011 19:24:45 +0000 (UTC) Received: by qadb10 with SMTP id b10so618396qad.13 for ; Mon, 21 Nov 2011 11:24:44 -0800 (PST) MIME-Version: 1.0 Received: by 10.224.176.139 with SMTP id be11mr6494949qab.43.1321903484680; Mon, 21 Nov 2011 11:24:44 -0800 (PST) Received: by 10.229.81.18 with HTTP; Mon, 21 Nov 2011 11:24:44 -0800 (PST) In-Reply-To: <4ECA9ED3.7050507@rawbw.com> References: <4EC98563.7010206@rawbw.com> <4ECA9ED3.7050507@rawbw.com> Date: Mon, 21 Nov 2011 20:24:44 +0100 Message-ID: From: Olivier Smedts To: Yuri Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: ports@freebsd.org, sylvio@freebsd.org, FreeBSD Questions Subject: Re: linphone-base conflicts with ortp and fails to install, it also fails to build: error: expected specifier-qualifier-list before 'UInt96' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 19:24:46 -0000 2011/11/21 Yuri : > On 11/21/2011 01:43, Olivier Smedts wrote: >> >> Hello, >> >> Please look at ports/UPDATING (20111016). > > I did that, and wrote about this in my message (see below), but command > 'portmaster -o net/linphone-base ortp' fails. Oops, sorry, I replied too fast ;-) I had the same caveat during kde install and pkg_deleted ortp so I did not have a problem with portmaster. Maybe you can pkg_delete -f ortp-\* before upgrading kde with portmaster ? > >>> >>> > =A0When I follow instruction in UPDATING and run this command 'portma= ster >>> > -o >>> > =A0net/linphone-base ortp', I get this messages: >>> > =A0In file included from ../include/mediastreamer2/msrtp.h:25, >>> > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 from msrtp.c:20: >>> > =A0../include/mediastreamer2/ice.h:60: error: expected >>> > specifier-qualifier-list >>> > =A0before 'UInt96' > > Yuri > --=20 Olivier Smedts=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=A0 _ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 ASCII ribbon campaign ( ) e-mail: olivier@gid0.org=A0 =A0 =A0 =A0 - against HTML email & vCards=A0 X www: http://www.gid0.org=A0 =A0 - against proprietary attachments / \ =A0 "Il y a seulement 10 sortes de gens dans le monde : =A0 ceux qui comprennent le binaire, =A0 et ceux qui ne le comprennent pas." From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 21:19:04 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CB11D106564A for ; Mon, 21 Nov 2011 21:19:02 +0000 (UTC) (envelope-from mmbsd1982@yahoo.com) Received: from nm39-vm6.bullet.mail.ne1.yahoo.com (nm39-vm6.bullet.mail.ne1.yahoo.com [98.138.229.166]) by mx1.freebsd.org (Postfix) with SMTP id 8D6F18FC12 for ; Mon, 21 Nov 2011 21:19:02 +0000 (UTC) Received: from [98.138.90.51] by nm39.bullet.mail.ne1.yahoo.com with NNFMP; 21 Nov 2011 21:19:02 -0000 Received: from [98.138.89.249] by tm4.bullet.mail.ne1.yahoo.com with NNFMP; 21 Nov 2011 21:19:02 -0000 Received: from [127.0.0.1] by omp1041.mail.ne1.yahoo.com with NNFMP; 21 Nov 2011 21:19:02 -0000 X-Yahoo-Newman-Property: ymail-3 X-Yahoo-Newman-Id: 43706.32403.bm@omp1041.mail.ne1.yahoo.com Received: (qmail 39058 invoked by uid 60001); 21 Nov 2011 21:19:02 -0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1321910341; bh=mGVjxx2XGxj/qz07qn+sYu7gvu423n8jOR4tyWSu35s=; h=X-YMail-OSG:Received:X-Mailer:Message-ID:Date:From:Subject:To:MIME-Version:Content-Type; b=SnhGIqeiBgG4pMAWkOPxeb6ExclaLXzgH6fhFsLgqoM/fik8zQ7S9zCd5eq62FTV76ACnr0OrSrg9VsLw1YIigaymjhT40m4CdJPhKx4tUpvHQNrzjaLy+gR1xUJvGrDwvtcKlMOP4s7zTIThHF3i9JZOsIYSK+wFGr1kczdkJ4= DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:X-Mailer:Message-ID:Date:From:Subject:To:MIME-Version:Content-Type; b=OLCFUiTDRrzyEtVva46UmEchuQnuJGafVzJ4qts6jE5aRbmLh38skB1mk+boMDQ/cK+XmH7OjX1SUoVZE0KkD1oNZyn7/T60X/80lZbmlJYXjXwiPw9qh8Oo16UtoHs9TivM0Go/0OJVjFQxRIIun6f5Thq4Mn+Jgcniq7kHD+k=; X-YMail-OSG: fJCI.ZUVM1nHr_ch_HYy1LU8h4dRtXk3ouj8AgwXU7JULNQ hauCvL0bYO1qEzGfLS_R8TfQC5LskWJslgjDm8QXM9GGTs_1AHX6jl.l8RlR hzBVb75tP9GK1zH2JGNZJoqAX9vxr_ULnkV55r0BfdHhsnV4C4_wODwcNWIC BwfhTLMWDW0mF_dYDd00Pz5UDsm1oGvCAIagCmPW8Ewl.F8F8VzfGUpRZq9k a5qjgk_a0EHrGN3MHlvSA964kQG7awLZselY9JtB6IFzHqhltiivZvwwNfFy YUb4MFGilB_AqLHPFdGU_TsfxgpI8PUsWa3LboCOsZMJQpeXGC_Y2xznQ8Tn GZiDZcAXwFSJP1lXNDMh0t1ZsIwiszIlLwuPqxY5PNA-- Received: from [173.66.230.37] by web124703.mail.ne1.yahoo.com via HTTP; Mon, 21 Nov 2011 13:19:01 PST X-Mailer: YahooMailClassic/15.0.4 YahooMailWebService/0.8.115.325013 Message-ID: <1321910341.33510.YahooMailClassic@web124703.mail.ne1.yahoo.com> Date: Mon, 21 Nov 2011 13:19:01 -0800 (PST) From: Mm Bsd To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailman-Approved-At: Mon, 21 Nov 2011 22:56:32 +0000 Subject: Whats the difference between password+RSA, and password-protected RSA ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 21:19:04 -0000 Let's say I'd like to add a small amount of extra security to my SSH login process. Let's say I decide the way I want to do this is by requiring BOTH a password and an RSA key. There appear to be patches, or procedures, that allow me to do this. So to log in, I would be required to enter a normal unix password, but I would ALSO be required to hold a proper RSA public key. My question is this: In terms of security (and correctness ?) what's the difference between this (unix password + SSH RSA key) and simply generating my RSA key *with* a password ? Both ways require me to "have something" and "know something", but they are obviously different, technically. Comments on the difference, and relative security of the two methods ? From owner-freebsd-questions@FreeBSD.ORG Mon Nov 21 23:38:22 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 05826106566B for ; Mon, 21 Nov 2011 23:38:22 +0000 (UTC) (envelope-from gibblertron@gmail.com) Received: from mail-ey0-f182.google.com (mail-ey0-f182.google.com [209.85.215.182]) by mx1.freebsd.org (Postfix) with ESMTP id 91D5D8FC0C for ; Mon, 21 Nov 2011 23:38:21 +0000 (UTC) Received: by eyd10 with SMTP id 10so8434687eyd.13 for ; Mon, 21 Nov 2011 15:38:20 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type:content-transfer-encoding; bh=FrCzD2ZCNbC/dED9fi6gArSs1/mumcbM/8+7EOiMrVE=; b=oNgUZj8M6ONjGvbEr1/NsarRI3n5JU4ZkhJl2RZi4pKsvuqeL2tm4spUMejSIgOd01 V5wD3W12tUK4iNXd+oovfXlhsABa5RSsso3XCXPqMg+bfk3v9CG0/Dhwtfo7S5Rs7VoQ B2iNA5cdzjZ3nWdio6S7U9ch0paeBMjj+U2LY= MIME-Version: 1.0 Received: by 10.213.22.131 with SMTP id n3mr1536227ebb.131.1321917000849; Mon, 21 Nov 2011 15:10:00 -0800 (PST) Received: by 10.14.96.201 with HTTP; Mon, 21 Nov 2011 15:10:00 -0800 (PST) In-Reply-To: <1321910341.33510.YahooMailClassic@web124703.mail.ne1.yahoo.com> References: <1321910341.33510.YahooMailClassic@web124703.mail.ne1.yahoo.com> Date: Mon, 21 Nov 2011 15:10:00 -0800 Message-ID: From: Patrick To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Subject: Re: Whats the difference between password+RSA, and password-protected RSA ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Nov 2011 23:38:22 -0000 In the case of a passphrase-protected RSA key, the server knowsnothing about it, so you would never be able to enforce that. It's onthe client side that the key is decrypted with the passphrase beforesubmitting it to the server. Patrick On Mon, Nov 21, 2011 at 1:19 PM, Mm Bsd wrote: > Let's say I'd like to add a small amount of extra security to my SSH logi= n process. > > Let's say I decide the way I want to do this is by requiring BOTH a passw= ord and an RSA key. =A0There appear to be patches, or procedures, that allo= w me to do this. =A0So to log in, I would be required to enter a normal uni= x password, but I would ALSO be required to hold a proper RSA public key. > > My question is this: > > In terms of security (and correctness ?) what's the difference between th= is (unix password + SSH RSA key) and simply generating my RSA key *with* a = password ? =A0Both ways require me to "have something" and "know something"= , but they are obviously different, technically. > > Comments on the difference, and relative security of the two methods ? > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" > From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 02:01:55 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4A1781065670 for ; Tue, 22 Nov 2011 02:01:55 +0000 (UTC) (envelope-from apseudoutopia@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id CF0CE8FC0C for ; Tue, 22 Nov 2011 02:01:54 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so9742051bkb.13 for ; Mon, 21 Nov 2011 18:01:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=0HKxinCFIQt3SmwGR7g+XsYYTmdkkJvO0oUV5dcdwQc=; b=mF17Fu4+R7gpMQcxMo1YhMLlMij5wnKjVJOhn2tXIc26VZlvn2DLCibUj4a5m49x1b U6bmvdgfGA7iPEoLmZNv4ij7e8NZeHj2MxyxenWuXPf0AqiUxN5e2ctduoZf4WOlJBYA 256vFsApI2bM8hvUjZZCdCQMXt1jCercIv/Pk= MIME-Version: 1.0 Received: by 10.205.112.6 with SMTP id eq6mr16949646bkc.16.1321927312810; Mon, 21 Nov 2011 18:01:52 -0800 (PST) Received: by 10.204.133.215 with HTTP; Mon, 21 Nov 2011 18:01:52 -0800 (PST) In-Reply-To: References: Date: Mon, 21 Nov 2011 21:01:52 -0500 Message-ID: From: APseudoUtopia To: Mehmet Erol Sanliturk Content-Type: text/plain; charset=UTF-8 Cc: freebsd-questions@freebsd.org Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 02:01:55 -0000 On Sun, Nov 20, 2011 at 11:26 PM, Mehmet Erol Sanliturk wrote: > > > On Sun, Nov 20, 2011 at 10:34 PM, APseudoUtopia > wrote: >> >> Hello, >> >> I'll be setting up a server with ZFS on 9.0-RELEASE (when it's >> released...). I've never used ZFS before, and although I've been >> reading quite a bit about it, I have some questions. >> >> My plan is to use RAID-Z1 across 4 disks. I'll be using GPT, and I >> would like the root to be ZFS as well. I found a guide: >> http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/RAIDZ1 >> >> In step #4, it has you create boot, swap, and zfs partitions on all 3 >> (which would be 4 in my case) disks. Then, in step #5, you install the >> bootloader into all 3 (4) drives. Why do you need boot and swap >> partitions on EACH disk? It seems to me that you would only need disk >> 1 to have boot, swap, and zfs, and the other 3 disks only have one >> partition (using the entire drive) for zfs's pool. Does it have to do >> with the RAIDZ1 setup? Even then, I don't understand it because it's >> not disk mirroring, it's RAID. The BIOS is set to look on one specific >> disk for the loader, not all of them. It seems I'm not understanding >> something entirely here. > > > > http://en.wikipedia.org/wiki/RAID > http://en.wikipedia.org/wiki/Category:RAID > > > If disk 1 fails , the computer ( BIOS ) will look disk 2 . > If disk 2 fails , the computer ( BIOS ) will look disk 3 . > > > If disk ( n - 1 ) fails , the computer ( BIOS ) will look disk ( n ) . > Ah! That makes sense. Thank you! From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 02:09:47 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 78302106566B for ; Tue, 22 Nov 2011 02:09:47 +0000 (UTC) (envelope-from apseudoutopia@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 0CA308FC17 for ; Tue, 22 Nov 2011 02:09:46 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so9749697bkb.13 for ; Mon, 21 Nov 2011 18:09:46 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; bh=xFj3taxBwfPN4A1VOzSLy+pecyAI6qm1daANnZp6QXg=; b=dgiUimyWs5gKLYbMutjKPFhohPZqF3t/blVQdBolPycs0xOAWHeliwn6Tt6u7zZyrE 7RFN/Tme+9Pslnk1jTjkgLFULpJe0PmGQgOfKHs7Y4h+pf6nHxeB04W0OpZ8ciPCbe4y PLW3FUefSE3rLlZ+1rsPWOCJD7H6PnfcGHKyw= MIME-Version: 1.0 Received: by 10.205.112.6 with SMTP id eq6mr16971888bkc.16.1321927785899; Mon, 21 Nov 2011 18:09:45 -0800 (PST) Received: by 10.204.133.215 with HTTP; Mon, 21 Nov 2011 18:09:45 -0800 (PST) In-Reply-To: <88f3d8e819b3420f8e61723bee90ba5e.squirrel@www.magehandbook.com> References: <88f3d8e819b3420f8e61723bee90ba5e.squirrel@www.magehandbook.com> Date: Mon, 21 Nov 2011 21:09:45 -0500 Message-ID: From: APseudoUtopia To: Daniel Staal Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Cc: freebsd-questions@freebsd.org Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 02:09:47 -0000 On Mon, Nov 21, 2011 at 10:14 AM, Daniel Staal wrote: > > On Sun, November 20, 2011 10:34 pm, APseudoUtopia wrote: >> Hello, >> >> I'll be setting up a server with ZFS on 9.0-RELEASE (when it's >> released...). I've never used ZFS before, and although I've been >> reading quite a bit about it, I have some questions. >> >> My plan is to use RAID-Z1 across 4 disks. I'll be using GPT, and I >> would like the root to be ZFS as well. I found a guide: >> http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/RAIDZ1 >> >> In step #4, it has you create boot, swap, and zfs partitions on all 3 >> (which would be 4 in my case) disks. Then, in step #5, you install the >> bootloader into all 3 (4) drives. Why do you need boot and swap >> partitions on EACH disk? It seems to me that you would only need disk >> 1 to have boot, swap, and zfs, and the other 3 disks only have one >> partition (using the entire drive) for zfs's pool. Does it have to do >> with the RAIDZ1 setup? Even then, I don't understand it because it's >> not disk mirroring, it's RAID. The BIOS is set to look on one specific >> disk for the loader, not all of them. It seems I'm not understanding >> something entirely here. > > As someone else said, the BIOS will search attached drives. =C2=A0And rem= ember > that one of the points to using a ZFS raid is that you can get hotswap > drives. =C2=A0If your one drive with a bootloader fails, you can hotswap = it and > not notice that it was that drive, which then means your next boot will > fail. > > Personally, I dedicated one small drive to the boot code, and put > everything else in ZFS. =C2=A0There are varying opinions on whether that = is a > good idea. =C2=A0;) > > Swap in theory can be put on the ZFS volume - and I have done so - but I > would not recommend it. =C2=A0It's caused lockups in some situations, whi= ch > would have been avoided by putting swap on it's own volume. > >> Also, with ZFS, you can have an unlimited number of filesystems, >> correct? I've been trying to figure out the best way to create these >> filesystems with the appropriate flags (specifically: atime, >> compression, devices, exec, quota, readonly, and setuid). If, for >> example, I set devices=3Doff and suid=3Doff on the tank/var filesystem, = it >> is applied to the children filesystem, such as, /var/log, /var/db, and >> so on? The flags/properties can be changed on-the-fly, correct? If, >> for example, I set a filesystem noexec, but later realize I need exec, >> I can change it without issue? > > Yep. =C2=A0As long as you didn't set the volume that has the zfs tools to > noexec. =C2=A0;) > >> Does anyone with zfs experience have any tips on creating a filesystem >> layout, in terms of which filesystems to create and what >> flags/properties? Would it be bad to set noatime, nosuid, nodev, and >> noexec all on the tank, then allow each property appropriately for >> each directory as necessary? As in, set the whole tank noexec, but >> allow exec for /bin, /usr/home, /usr/local/bin, etc.? > > Well, you already linked to a decent guide to the filesystem layout. > Following it won't get you too far wrong. =C2=A0A couple of thoughts thou= gh: > > One thing that might have been useful in my experience is not having / be > /zroot. =C2=A0If I'd set /zroot/root to / (and built everything else belo= w > that) I'd be able to play around a bit more, by setting up other > filesystems under /zroot. (Including things like making a new root volume= , > or excluding volumes from snapshots.) =C2=A0Note that would cause changes= in > the bootloader code from the wiki example. > > And don't be to worried about getting it 'right the first time': Because > ZFS allows you to create filesystems so easily, you can play around with > it. =C2=A0It's not too hard to move a directory tree to a new filesystem,= even > on a live box. =C2=A0;) =C2=A0You can create copies, try things out, and = then use > whatever's the best system for you. > > As for noexec on /... =C2=A0I'd be hesitant. =C2=A0Without being an absol= ute master > on what is run from where under all circumstances in FreeBSD, it would > worry me. =C2=A0(Does /etc need exec? =C2=A0 How about /root? =C2=A0/boot= ? =C2=A0etc.) =C2=A0I'd > rather err on the side of turning it off where I know I don't need it, > instead of turning it on where I do. =C2=A0If I forget one, it's less lik= ely to > break my system. =C2=A0;) > > The one other place where I'd disagree with the wiki page you linked woul= d > be on compression: If you have a fairly recent processor in the box, I'd > recommend gzip for just about everywhere. =C2=A0In most cases it'll actua= lly > speed up I/O. > > Oh, and if you are thinking of using dedup, you'll need sha256 for the > checksum. =C2=A0But I think it'll do that automatically if you turn on de= dup. > > Daniel T. Staal > > --------------------------------------------------------------- > This email copyright the author. =C2=A0Unless otherwise noted, you > are expressly allowed to retransmit, quote, or otherwise use > the contents for non-commercial purposes. =C2=A0This copyright will > expire 5 years after the author's death, or in 30 years, > whichever is longer, unless such a period is in excess of > local copyright law. > --------------------------------------------------------------- > Ok, thank you for the advice. It's on a quad-core xeon, so, in reference to your suggestion, I'll turn on compression for the entire pool. I did read that having swap in zfs may cause problems, so I'll be sticking to the traditional freebsd-swap partition. Another quick question about swap: If I have 4 drives, with 512MB swap, the system uses all 4 swap partitions, correct? So it's not like it'd be going to waste? I'd have a total of 2 GB swap? Thanks! From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 03:08:59 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6347F106564A for ; Tue, 22 Nov 2011 03:08:59 +0000 (UTC) (envelope-from airton.arantes@gmail.com) Received: from mail-ww0-f50.google.com (mail-ww0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id EF12A8FC12 for ; Tue, 22 Nov 2011 03:08:58 +0000 (UTC) Received: by wwg14 with SMTP id 14so10973345wwg.31 for ; Mon, 21 Nov 2011 19:08:58 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:from:date:message-id:subject:to:content-type; bh=ijDPm6y8hIL1+PQm0lLb52FbfTB7SfvnbSL4WKEQKBU=; b=FSV7UxWsQ5xDsManPfvY/8hxENG1dTCB3xwNWtKNXnUvS8vMBpsTCh1xiIb/lJNk1s Cq5IMnDbIzE4c6eaovfDiSbUYQJTaTS+TwIQcb8T2Aic1aS0ZuxBvoc/TkKHPN9OYUXK PBlOXM6+qyYQrFynGqPfDzyHk08Dv8wv0XqpQ= Received: by 10.216.196.232 with SMTP id r82mr2615671wen.55.1321929930089; Mon, 21 Nov 2011 18:45:30 -0800 (PST) MIME-Version: 1.0 Received: by 10.216.9.13 with HTTP; Mon, 21 Nov 2011 18:45:09 -0800 (PST) From: Airton Arantes Date: Mon, 21 Nov 2011 23:45:09 -0300 Message-ID: To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Problems with df -mh command X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 03:08:59 -0000 Hello folks, I'm getting in troubles with the df -mh command. I have two HDs, where one is for my FreeBSD 8.2-RELEASE and other to my files sharing mounted in /var/db/files. The command dont return anything and I can't back to shell again, not even CTRL+C works, I think that this doesn't works because when I do ps aux | grep df I get this: # ps aux | grep df root 58218 0.0 0.1 6920 1048 0- D+ Thu09AM 0:00.00 df -mh root 92073 0.0 0.1 6920 1048 1 D+ 11:18PM 0:00.00 df -mh root 92136 0.0 0.1 9124 1228 2 S+ 11:27PM 0:00.00 grep df # Namely, the process state is uninterruptable, so I can't to kill the proccess. why my command isn't doing anything? -- Airton Arantes Coelho Filho From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 03:16:02 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0043C1065670 for ; Tue, 22 Nov 2011 03:16:01 +0000 (UTC) (envelope-from DStaal@usa.net) Received: from mail.magehandbook.com (173-8-4-45-WashingtonDC.hfc.comcastbusiness.net [173.8.4.45]) by mx1.freebsd.org (Postfix) with ESMTP id C8F928FC12 for ; Tue, 22 Nov 2011 03:16:01 +0000 (UTC) Received: from [192.168.1.50] (Mac-Pro.magehandbook.com [192.168.1.50]) by mail.magehandbook.com (Postfix) with ESMTP id A70AC991 for ; Mon, 21 Nov 2011 22:16:00 -0500 (EST) Date: Mon, 21 Nov 2011 22:15:48 -0500 From: Daniel Staal To: freebsd-questions@freebsd.org Message-ID: <68E1A0E2635B77E949FA881C@mac-pro.magehandbook.com> In-Reply-To: References: <88f3d8e819b3420f8e61723bee90ba5e.squirrel@www.magehandbook.com> X-Mailer: Mulberry/4.0.8 (Mac OS X) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 03:16:02 -0000 --As of November 21, 2011 9:09:45 PM -0500, APseudoUtopia is alleged to have said: > Ok, thank you for the advice. It's on a quad-core xeon, so, in > reference to your suggestion, I'll turn on compression for the entire > pool. I did read that having swap in zfs may cause problems, so I'll > be sticking to the traditional freebsd-swap partition. > > Another quick question about swap: If I have 4 drives, with 512MB > swap, the system uses all 4 swap partitions, correct? So it's not like > it'd be going to waste? I'd have a total of 2 GB swap? --As for the rest, it is mine. I'll admit I don't know. As as I said: I put it on ZFS. ;) It works well enough, as long as I make sure it never runs low on RAM. (Basically, I threw money at the problem.) There are a few cases where compression isn't a win - if you have a section that you know will have mostly non-compressible data it's worth turning off. (I also haven't actually tried it on *root*, just in case... Not that I'd expect problems, but I didn't see the need to take the chance.) But most of my stuff is compressed. Note that changing compression settings doesn't affect anything *currently* on the disk; just new writes. Daniel T. Staal --------------------------------------------------------------- This email copyright the author. Unless otherwise noted, you are expressly allowed to retransmit, quote, or otherwise use the contents for non-commercial purposes. This copyright will expire 5 years after the author's death, or in 30 years, whichever is longer, unless such a period is in excess of local copyright law. --------------------------------------------------------------- From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 04:37:39 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CEE08106564A for ; Tue, 22 Nov 2011 04:37:39 +0000 (UTC) (envelope-from perryh@pluto.rain.com) Received: from agora.rdrop.com (unknown [IPv6:2607:f678:1010::34]) by mx1.freebsd.org (Postfix) with ESMTP id 94AF18FC12 for ; Tue, 22 Nov 2011 04:37:39 +0000 (UTC) Received: from agora.rdrop.com (66@localhost [127.0.0.1]) by agora.rdrop.com (8.13.1/8.12.7) with ESMTP id pAM4bcEc057069 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Mon, 21 Nov 2011 20:37:38 -0800 (PST) (envelope-from perryh@pluto.rain.com) Received: (from uucp@localhost) by agora.rdrop.com (8.13.1/8.12.9/Submit) with UUCP id pAM4bcvu057068; Mon, 21 Nov 2011 20:37:38 -0800 (PST) Received: from fbsd81 ([192.168.200.81]) by pluto.rain.com (4.1/SMI-4.1-pluto-M2060407) id AA10699; Mon, 21 Nov 11 20:34:35 PST Date: Tue, 22 Nov 2011 03:34:13 -0800 From: perryh@pluto.rain.com To: mmbsd1982@yahoo.com Message-Id: <4ecb88b5.qe8ftxOGspcS5omM%perryh@pluto.rain.com> References: <1321910341.33510.YahooMailClassic@web124703.mail.ne1.yahoo.com> In-Reply-To: <1321910341.33510.YahooMailClassic@web124703.mail.ne1.yahoo.com> User-Agent: nail 11.25 7/29/05 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Whats the difference between password+RSA, and password-protected RSA ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 04:37:39 -0000 Mm Bsd wrote: > Let's say I'd like to add a small amount of extra security to my > SSH login process. > > Let's say I decide the way I want to do this is by requiring > BOTH a password and an RSA key ... So to log in, I would be > required to enter a normal unix password, but I would ALSO be > required to hold a proper RSA public key. > > My question is this: > > In terms of security (and correctness ?) what's the difference > between this (unix password + SSH RSA key) and simply generating > my RSA key *with* a password ? Both ways require me to "have > something" and "know something", but they are obviously different, > technically. Suppose you are a bank branch manager, and consider your RSA key as the combination to the vault. (Also suppose that you are the only person authorized to open the vault, and that the combination is complicated enough that you can't just remember it -- it has to be written down.) Normal file security (chmod 400) is like storing the paper, on which the combination is written, inside your locked (personal) office. Someone other than you, e.g. the janitor, may have a key to your office. Protecting the RSA key with a password is like locking the paper in your desk (which is in your locked office). Only you have a key to the desk. Requiring a login password in addition to the RSA key is like adding a second, interior door -- to which you have the only key -- to the vault. That second door is nowhere near as strong as the main vault door, but it does provide some additional protection. There's no reason in principle why you can't protect your RSA key with a password, and also require a (different) password for login in addidion to the RSA key. From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 08:06:51 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DAB14106566C for ; Tue, 22 Nov 2011 08:06:51 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (unknown [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id 6C3A88FC0A for ; Tue, 22 Nov 2011 08:06:51 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pAM86l0e011618 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO) for ; Tue, 22 Nov 2011 08:06:48 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pAM86l0e011618 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1321949208; bh=ZojPHXhLUjjIsFdCJv1XwiFgCc2aW2jXHVQ9CCZKWTU=; h=Message-ID:Date:From:MIME-Version:To:Subject:References: In-Reply-To:Content-Type:Cc; b=E9B93OiqUg2S64ZsGgUr4X1d/rQFZ89Sgobd5WgDGaklgek9sQ+NRgR12cg/RTpPG LMLOLRdLR+MY9wjTLkNEsbkulkJhISp/EuocHhervgdGL/Ij+g+L3430O4I2G4gEeE 8Nk5RrpvR+SXX4DM1xTJXrScRshRW4wLW1KWjz3s= Message-ID: <4ECB580E.20203@infracaninophile.co.uk> Date: Tue, 22 Nov 2011 08:06:38 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <88f3d8e819b3420f8e61723bee90ba5e.squirrel@www.magehandbook.com> In-Reply-To: X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig3C342C355BE6B1AE500B784A" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-0.6 required=5.0 tests=BAYES_05,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 08:06:52 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig3C342C355BE6B1AE500B784A Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable On 22/11/2011 02:09, APseudoUtopia wrote: > Another quick question about swap: If I have 4 drives, with 512MB > swap, the system uses all 4 swap partitions, correct? So it's not like > it'd be going to waste? I'd have a total of 2 GB swap? Well, yes. If you just declare those raw partitions to be swap areas, that will be the case. However, doing this is asking for trouble: you subvert any resilience features obtained by using ZFS with raidz1. If any one of the drives fails, your swap area will break and your system will probably crash. Better to set up two pairs of gmirrors for swap -- the procedure is described here: http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/Mirror in section3 "Finish Install." This will effectively give you a raid10 for your swap, with a total size of 1GB. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------enig3C342C355BE6B1AE500B784A Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7LWBYACgkQ8Mjk52CukIxqKACfZaIQofP607cf2KI6wYWO4MwT 62QAnjk7FSNNbbUbavxPDvFuP0vAqsK6 =+dCQ -----END PGP SIGNATURE----- --------------enig3C342C355BE6B1AE500B784A-- From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 09:05:03 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BF347106564A for ; Tue, 22 Nov 2011 09:05:03 +0000 (UTC) (envelope-from mlmichael70@gmail.com) Received: from mail-ww0-f42.google.com (mail-ww0-f42.google.com [74.125.82.42]) by mx1.freebsd.org (Postfix) with ESMTP id 4FAD38FC16 for ; Tue, 22 Nov 2011 09:05:02 +0000 (UTC) Received: by wwe3 with SMTP id 3so6918270wwe.1 for ; Tue, 22 Nov 2011 01:05:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject :content-type:content-transfer-encoding; bh=kvAMA4fw98rpJYs9JJTQQQdtNKSAybZvV04tRVrvO0E=; b=qhJK4iahBMVyMNLL0JF+gFVKuFmUeoT31gbektK7zR6GDnkVgXxgDNdiu0AmLRV2u3 X9sAhlC+p6gs9uEObq6YFmcGV+ifa8gapfkE6IEMAH1paSf86NtRkwy8hzoJD8NeMzOl iUutuE4y06rHCwr9hQUP8S4lzdX/66rewDGns= Received: by 10.227.204.143 with SMTP id fm15mr11186341wbb.26.1321951126128; Tue, 22 Nov 2011 00:38:46 -0800 (PST) Received: from prime.nonspace (adsl-83-100-195-106.karoo.KCOM.COM. [83.100.195.106]) by mx.google.com with ESMTPS id et20sm15818216wbb.15.2011.11.22.00.38.43 (version=SSLv3 cipher=OTHER); Tue, 22 Nov 2011 00:38:45 -0800 (PST) Message-ID: <4ECB5F95.20705@gmail.com> Date: Tue, 22 Nov 2011 08:38:45 +0000 From: Michael User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:8.0) Gecko/20111109 Thunderbird/8.0 MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Subject: bsdinstall distextract and manual installation X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 09:05:03 -0000 Hello, I prefer manual installations so I was always going to fixit mode and doing something like: cd /dist/8.2-RELEASE/base install.sh Now there is no install.sh script in 9.0-RC2 anymore. Am I right thinking that "bsdinstall distextract" should do the same thing? If yes then what is the proper way of using it? I'm setting these variables: $DISTRIBUTIONS="base" $BSDINSTALL_DISTDIR=/usr/freebsd-dist $BSDINSTALL_CHROOT=/mnt and I'm mounting my disk (manually or using "bsdinstall mount") and then I'm getting a segmentation fault when I simply try to run "bsdinstall distextract". In other words, how can I get the distribution files installed in FreeBSD 9? Thank you in advance, M. From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 09:14:07 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9FCED106564A for ; Tue, 22 Nov 2011 09:14:07 +0000 (UTC) (envelope-from mlmichael70@gmail.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 2C5DE8FC08 for ; Tue, 22 Nov 2011 09:14:06 +0000 (UTC) Received: by faap15 with SMTP id p15so229381faa.13 for ; Tue, 22 Nov 2011 01:14:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=KoIuJ+qDCot9d+xSNXwteTTa6MvkFZ6RuTJa075smCY=; b=qfuXIQZfWwxTXAoFHzXtS8xEIBDAUzyWvVqYR4DYIgSEoQc/XLeKyY5aKUnhadu0eV um+RvL+g/Pf1jL96FXiv7bdUeFFdzMQRJkp9CcfXDoPEVHPJv20I1yXpqMGB1RY93M55 eSvmlgUgv32ouq0kfOeU3SU9jOr5m6lAtBKXw= Received: by 10.181.12.39 with SMTP id en7mr17727300wid.40.1321953245921; Tue, 22 Nov 2011 01:14:05 -0800 (PST) Received: from prime.nonspace (adsl-83-100-195-106.karoo.KCOM.COM. [83.100.195.106]) by mx.google.com with ESMTPS id fi11sm15934629wbb.9.2011.11.22.01.14.03 (version=SSLv3 cipher=OTHER); Tue, 22 Nov 2011 01:14:04 -0800 (PST) Message-ID: <4ECB67DE.9090700@gmail.com> Date: Tue, 22 Nov 2011 09:14:06 +0000 From: Michael User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:8.0) Gecko/20111109 Thunderbird/8.0 MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" References: <4ECB5F95.20705@gmail.com> In-Reply-To: <4ECB5F95.20705@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: bsdinstall distextract and manual installation X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 09:14:07 -0000 On 22/11/2011 08:38, Michael wrote: > If yes then what is the proper way of using it? I'm setting these > variables: > $DISTRIBUTIONS="base" I've found the problem. It works fine with "base.txz" so I believe the manpage should be corrected (it gives examples without file extensions). Michael From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 09:52:42 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B8CD9106564A for ; Tue, 22 Nov 2011 09:52:42 +0000 (UTC) (envelope-from kraduk@gmail.com) Received: from mail-yw0-f54.google.com (mail-yw0-f54.google.com [209.85.213.54]) by mx1.freebsd.org (Postfix) with ESMTP id 764768FC08 for ; Tue, 22 Nov 2011 09:52:42 +0000 (UTC) Received: by ywe9 with SMTP id 9so8137914ywe.13 for ; Tue, 22 Nov 2011 01:52:41 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=BRzW/Zbl2KKOFOiwUXED14DmN+WwJbVkvJhrHByIcnc=; b=SV6zncW7m5l7+AyrgHI4JfvqMxnGWteifPaGqOVaa40b5rIjnq0M3nDePyIyORze8g ee3YWHLtlTg7figrGejAvoRNZLxc5OS/vdUVwQ/UkDA+CVvqJK55L8rQhzCxx3JIPU13 6Tx1j1bjlnnYkZucC6QqqlrH8y6mpKn7hE/pQ= MIME-Version: 1.0 Received: by 10.236.190.130 with SMTP id e2mr24936447yhn.107.1321955561586; Tue, 22 Nov 2011 01:52:41 -0800 (PST) Received: by 10.236.102.164 with HTTP; Tue, 22 Nov 2011 01:52:41 -0800 (PST) In-Reply-To: <4ECB580E.20203@infracaninophile.co.uk> References: <88f3d8e819b3420f8e61723bee90ba5e.squirrel@www.magehandbook.com> <4ECB580E.20203@infracaninophile.co.uk> Date: Tue, 22 Nov 2011 09:52:41 +0000 Message-ID: From: krad To: Matthew Seaman Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 09:52:42 -0000 > It seems to me that you would only need disk > 1 to have boot, swap, and zfs, and the other 3 disks only have one > partition (using the entire drive) for zfs's pool. As other have mentioned redundancy, but also you will nver see the befit as the zfs vdev (like any other raid system) size will defined by the smallest unit in the group. ie if you have 4 x 1tb drives and you have 3x 1tb slices and 950GB available on your boot drive then all the storage you will get is 4 x 950 - the parity data. Therefore make all you drives layouts identical and mirror any boot partitions across them all, or just 2 and use the other 2 for swap or a combination of the 2. Another way to do it is boot off usb stick although you should be able to boot off a native raidz these days without to much hassle. If you do run into issues with booting of zfs though try these recompiled boot blocks as I never have issues with them. http://people.freebsd.org/~pjd/zfsboot/ If you are using 4k disks which there is a fairly good chance you are make sure you create the pool with ashift=12 using the gnop trick. Otherwise you may experiance bad disk performance. http://www.leidinger.net/blog/2011/05/03/another-root-on-zfs-howto-optimized-for-4k-sector-drives/ WIth regards to dedup, unless you have bucket loads of ram (32+Gigs) and/or an ssd dedicated to l2arc stay away from it as you will almost certainly find that very quickly the DDT wont fit into ram, and when that happens the performance of the pool takes a serious performance dive do to every write incuring many many reads to retrieve the ddt information. Also it may not be worth it with your dataset. To test what you might achieve do a zdb -S to see your expected dedup ratio. in terms of disk layout this is fairly arbitary and you have a lot of choice. This is what i use, and a loosly based it on opensolaris system-4k/be 26.6G 207G 252K /system-4k/be system-4k/be/root20110930 1.73G 207G 1.31G legacy system-4k/be/root20111011 2.03G 207G 1.69G legacy system-4k/be/root20111023 1.98G 207G 1.68G /system-4k/be/root20111023 system-4k/be/root20111028 2.00G 207G 1.68G /system-4k/be/root20111028 system-4k/be/root20111112 2.08G 207G 1.76G /system-4k/be/root20111112 system-4k/be/tmp 360K 209G 360K /tmp system-4k/be/usr-local 3.30G 207G 3.30G /usr/local/ system-4k/be/usr-obj 728M 207G 728M /usr/obj system-4k/be/usr-ports 2.05G 207G 1.51G /usr/ports system-4k/be/usr-ports/distfiles 547M 207G 547M /usr/ports/distfiles system-4k/be/usr-src 705M 207G 705M /usr/src system-4k/be/var 2.04G 213G 816M /var system-4k/be/var/log 1.21G 213G 1.21G /var/log system-4k/be/var/mysql 34.0M 213G 34.0M /var/db/mysql everytime I do a make installword and installkernel I create a new root fs. This way I can easily flip flop back and two between different os builds if i want to. I use this simple script to set it up for me. Its not perfect but it works well enough $ cat /usr/local/scripts/install_world #!/usr/local/bin/bash if [ $UID != 0 ] ; then echo your not root !! ; exit 1 fi date=`date '+%Y%m%d'` oroot=`grep "vfs.root.mountfrom=\"zfs:system-4k/" /boot/loader.conf | sed -e "s#^.*\"zfs:system-4k/be/##" -e "s#\"##"` nroot="root$date" snap="autoup-$RANDOM" zpool=system-4k export DESTDIR=/$zpool/be/$nroot if [ "$oroot" = "$nroot" ] ; then echo "i cant update twice in one day"; exit 1 fi echo building in $zpool/be/$nroot zfs snapshot $zpool/be/$oroot@$snap && zfs send $zpool/be/$oroot@$snap | mbuffer -m 500M | zfs receive -vv $zpool/be/$nroot && cd /usr/src && make installkernel && mount_nullfs /var $DESTDIR/var && mergemaster -p -D $DESTDIR && make installworld && mergemaster -D $DESTDIR && sed -i -e "s#$zpool/be/$oroot#$zpool/be/$nroot#" $DESTDIR/boot/loader.conf && \ echo "Installing boot records.." && zpool status system-4k | grep -A 2 mirror | grep ad | sed -e "s/p[0-9]//" | while read a b; do gpart bootcode -b /zfsboot/pmbr -p /zfsboot/gptzfsboot -i 1 $a; done && cp -v /zfsboot/zfsloader $DESTDIR/boot/. && echo -en "\n\nNow run these two commands to make the changes live, and reboot zfs set mountpoint=legacy $zpool/be/$nroot zpool set bootfs=$zpool/be/$nroot $zpool\n\n" From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 13:39:51 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 95A681065672 for ; Tue, 22 Nov 2011 13:39:51 +0000 (UTC) (envelope-from jau@jau.iki.fi) Received: from jau.iki.fi (ip193-64-26-117.cust.eunet.fi [193.64.26.117]) by mx1.freebsd.org (Postfix) with ESMTP id 04D808FC0A for ; Tue, 22 Nov 2011 13:39:50 +0000 (UTC) Received: from jau.iki.fi (localhost [127.0.0.1]) by jau.iki.fi (8.14.5/8.14.5) with ESMTP id pAMDdmXg023915 for ; Tue, 22 Nov 2011 15:39:48 +0200 (EET) (envelope-from jau@jau.iki.fi) Received: (from jau@localhost) by jau.iki.fi (8.14.5/8.14.5/Submit) id pAMDdlm2023914 for questions@freebsd.org; Tue, 22 Nov 2011 15:39:47 +0200 (EET) (envelope-from jau) Message-Id: <201111221339.pAMDdlm2023914@jau.iki.fi> To: questions@freebsd.org Date: Tue, 22 Nov 2011 15:39:47 +0200 (EET) From: jau@iki.fi (Jukka A. Ukkonen) Sender: jau@iki.fi Latin-Date: dies Martis XXII Novembrie a.d. MMXI Organization: Private person OS-Platform: FreeBSD Phone: +358-9-6215280 (home) / +358-500-606671 (gsm) Content-Conversion: prohibited X-Mailer: ELM [version 2.4 PL25+pgp] MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.2.7 (jau.iki.fi [127.0.0.1]); Tue, 22 Nov 2011 15:39:48 +0200 (EET) Cc: Subject: msk0 NIC getting stuck X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: jau@iki.fi List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 13:39:51 -0000 Greetings all, Has anyone seen similar problems as this... Nov 22 14:49:49 sleipnir kernel: msk0: watchdog timeout Nov 22 14:49:49 sleipnir kernel: msk0: prefetch unit stuck? Nov 22 14:49:49 sleipnir kernel: msk0: initialization failed: no memory for Rx b uffers The NIC freezes completely and will not return to sanity with "ifconfig msk0 down" and "ifconfig msk0 up". The environment this happens on is FreeBSD sleipnir 9.0-PRERELEASE FreeBSD 9.0-PRERELEASE #0: Sun Nov 20 17:34:27 EET 2011 root@sleipnir:/usr/obj/usr/src/sys/Sleipnir amd64 The same thing happens with the GENERIC kernel as well as with my locally compiled kernel. The only difference in the kernels is that the locally compiled one supports 4 fibs. The hardware is a Supermicro H8DCL-6F motherboard with 2 AMD 4162EE CPUs and 16GB of memory. All of the file systems are mirrored on top of GUID partitions. Most of them are UFS2+SU on top of gmirror and one ZFS on top of zpool mirror. Cheers, // jau .--- ..- -.- -.- .- .- .-.-.- ..- -.- -.- --- -. . -. / Jukka A. Ukkonen, Oxit Ltd, Finland /__ M.Sc. (sw-eng & cs) (Phone) +358-500-606-671 / Internet: Jukka.Ukkonen(a)Oxit.Fi / Internet: jau(a)iki.fi v .--- .- ..- ...-.- .. -.- .. .-.-.- ..-. .. + + + + My opinions are mine and mine alone, not my employers. + + + + From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 15:27:36 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DBC24106568C for ; Tue, 22 Nov 2011 15:27:36 +0000 (UTC) (envelope-from b.smeelen@ose.nl) Received: from mail.ose.nl (mail.ose.nl [212.178.134.164]) by mx1.freebsd.org (Postfix) with ESMTP id 79C938FC0A for ; Tue, 22 Nov 2011 15:27:36 +0000 (UTC) X-Footer: b3NlLm5s Received: from localhost ([127.0.0.1]) by mail.ose.nl (using TLSv1/SSLv3 with cipher AES256-SHA (256 bits)) for freebsd-questions@freebsd.org; Tue, 22 Nov 2011 16:17:31 +0100 Message-ID: <4ECBBD0B.6090600@ose.nl> Date: Tue, 22 Nov 2011 16:17:31 +0100 From: Bas Smeelen User-Agent: Mozilla/5.0 (X11; Linux i686; rv:5.0) Gecko/20110627 Thunderbird/5.0 MIME-Version: 1.0 To: FreeBSD Questions Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: 9.0-PRERELEASE slow scp transfer X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 15:27:36 -0000 Hi I have a stange thing. 1. 7.3-RELEASE-p2 on dell poweredge SC440 with bge nic 2. 9.0-PRERELEASE on another dell poweredge SC440 bge nic 3. 7.4-RELEASE-p4 in a vmware virtual machine with em nic When i copy a file with scp which is a few hundred megabytes on 1. from 2. or from 3. i get about 10MB/s When i copy a filewith scpwhich is a few hundred megabytes on 3. from 1. or from 2. i get about 10MB/s When i copy a file with scpwhich is a few hundred megabytes on2. from 3.i get about 10MB/s When i copy a file with scp which is a few hundred megabytes on2. from 1.i get about 130 KB/s I can find nothing in the logs or netstat errors on this 9.0-PRERELEASE box. I have switched network kabels and ports on the switch. How could i further investigate? Thanks in advance Disclaimer: http://www.ose.nl/email From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 15:46:41 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C451B106567F for ; Tue, 22 Nov 2011 15:46:41 +0000 (UTC) (envelope-from sales@procut1.co.uk) Received: from deferred-out-211.livemail.co.uk (deferred-out-211.livemail.co.uk [213.171.216.211]) by mx1.freebsd.org (Postfix) with ESMTP id D8D038FC27 for ; Tue, 22 Nov 2011 15:46:40 +0000 (UTC) Received: from cust-smtp-193.fasthosts.net.uk (smtp-out-60.livemail.co.uk [213.171.216.60]) by deferred-out-211.livemail.co.uk (Postfix) with ESMTP id 8EB183C81F9 for ; Tue, 22 Nov 2011 15:13:55 +0000 (GMT) Received: from kellyPC (109-170-215-94.xdsl.murphx.net [109.170.215.94]) by cust-smtp-193.fasthosts.net.uk (Postfix) with ESMTP id D80FA141002B for ; Tue, 22 Nov 2011 15:14:34 +0000 (GMT) From: "Procut" To: Date: Tue, 22 Nov 2011 14:59:48 -0000 Message-ID: <0c9901cca929$609c21a0$21d464e0$@co.uk> MIME-Version: 1.0 X-Mailer: Microsoft Office Outlook 12.0 Content-Language: en-gb Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: ProCut CNC Machining X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 15:46:41 -0000 Image 1 ProCut CNC Machining Service....High Volume Cutting & Routing Specialist Sales@ProCutuk.co.uk www.ProCutuk.co.uk Tel 01702 299540 Top picture...3100mm Schelling Beam Saw. Designed to cut all non-ferrous sheet material and with fully automatic rotating air bed to eliminate sketching and full CNC control for accuracy and repeatability. When the Schelling is used in conjunction with our dedicated Schelling Radiusing Machine it can eliminate routing all together! See below and find out how. ProCut A Better Cut All Round.. Image 3 Schelling Radiusing Machine When all you need is square or rectangles with radiused corners why pay for routing when ProCut has a dedicated Radiusing machine, so we cut them on the beam saw and produce the rad's on this machine which means a ?2 routed panel can cost as little as 45p! ProCut, the next best thing to a production line........ Image 4 Multihead Router with unique Sheet Stacking....... ProCut's pride and joy, The Multihead Multi Stacking 3m x 2m Axxiom routeing machine. The beauty of this machine is we can stack sheet material and with 2 routing and two drilling heads means we can produce up to 20 times more than a conventional router! ProCut. Saving you time and money..... Image 5 ProCut. Do Timber.... They don't make them like they used too! ProCut's Wadkin Thickness Planner is ideal for the odd 100,000 BBQ planks we produce as well as a variety of other timber jobs ProCut. Gives you the Cutting Edge.......... Image 2 4 Head Router! The above picture shows our Shoda 4 head router with 4 drilling stations, which makes short work of the smaller panel jobs as typically we will lay up from 20 to 60 panels at a time which means we can produce this quantity in one cut cycle. Pretty important when you need your job in double quick time! Phone today for your quote. 01702 299540 Did you know? that ProCut are believed to be the only known owners of the fully integrated clamping system on 2 of our larger routers giving x10, x20 x30 productivity over a conventional router! HOW'S THAT! And when you are open 24/7 meeting those deadlines is a breeze! | ProCut CNC Machining Services Ltd Unit 3 Towerfield Close Shoeburyness Essex SS3 9QP Tel 01702 299540 Sales@ProCutuk.co.uk www.proCutuk.co.uk | Click here to unsubscribe From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 15:46:57 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DCFC61065676 for ; Tue, 22 Nov 2011 15:46:57 +0000 (UTC) (envelope-from sales@procut1.co.uk) Received: from deferred-out-211.livemail.co.uk (deferred-out-211.livemail.co.uk [213.171.216.211]) by mx1.freebsd.org (Postfix) with ESMTP id ED1BF8FC17 for ; Tue, 22 Nov 2011 15:46:55 +0000 (UTC) Received: from cust-smtp-193.fasthosts.net.uk (smtp-out-60.livemail.co.uk [213.171.216.60]) by deferred-out-211.livemail.co.uk (Postfix) with ESMTP id 38E413C8311 for ; Tue, 22 Nov 2011 15:13:58 +0000 (GMT) Received: from kellyPC (109-170-215-94.xdsl.murphx.net [109.170.215.94]) by cust-smtp-193.fasthosts.net.uk (Postfix) with ESMTP id DF2751410034 for ; Tue, 22 Nov 2011 15:14:33 +0000 (GMT) From: "Procut" To: Date: Tue, 22 Nov 2011 14:59:48 -0000 Message-ID: <0c9401cca929$60084610$2018d230$@co.uk> MIME-Version: 1.0 X-Mailer: Microsoft Office Outlook 12.0 Content-Language: en-gb Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: ProCut CNC Machining X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 15:46:58 -0000 Image 1 ProCut CNC Machining Service....High Volume Cutting & Routing Specialist Sales@ProCutuk.co.uk www.ProCutuk.co.uk Tel 01702 299540 Top picture...3100mm Schelling Beam Saw. Designed to cut all non-ferrous sheet material and with fully automatic rotating air bed to eliminate sketching and full CNC control for accuracy and repeatability. When the Schelling is used in conjunction with our dedicated Schelling Radiusing Machine it can eliminate routing all together! See below and find out how. ProCut A Better Cut All Round.. Image 3 Schelling Radiusing Machine When all you need is square or rectangles with radiused corners why pay for routing when ProCut has a dedicated Radiusing machine, so we cut them on the beam saw and produce the rad's on this machine which means a ?2 routed panel can cost as little as 45p! ProCut, the next best thing to a production line........ Image 4 Multihead Router with unique Sheet Stacking....... ProCut's pride and joy, The Multihead Multi Stacking 3m x 2m Axxiom routeing machine. The beauty of this machine is we can stack sheet material and with 2 routing and two drilling heads means we can produce up to 20 times more than a conventional router! ProCut. Saving you time and money..... Image 5 ProCut. Do Timber.... They don't make them like they used too! ProCut's Wadkin Thickness Planner is ideal for the odd 100,000 BBQ planks we produce as well as a variety of other timber jobs ProCut. Gives you the Cutting Edge.......... Image 2 4 Head Router! The above picture shows our Shoda 4 head router with 4 drilling stations, which makes short work of the smaller panel jobs as typically we will lay up from 20 to 60 panels at a time which means we can produce this quantity in one cut cycle. Pretty important when you need your job in double quick time! Phone today for your quote. 01702 299540 Did you know? that ProCut are believed to be the only known owners of the fully integrated clamping system on 2 of our larger routers giving x10, x20 x30 productivity over a conventional router! HOW'S THAT! And when you are open 24/7 meeting those deadlines is a breeze! | ProCut CNC Machining Services Ltd Unit 3 Towerfield Close Shoeburyness Essex SS3 9QP Tel 01702 299540 Sales@ProCutuk.co.uk www.proCutuk.co.uk | Click here to unsubscribe From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 16:09:58 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6F3FE106564A for ; Tue, 22 Nov 2011 16:09:58 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp6.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id E34568FC1A for ; Tue, 22 Nov 2011 16:09:57 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pAMG9rTE076444 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO); Tue, 22 Nov 2011 16:09:53 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pAMG9rTE076444 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1321978193; bh=3CypbAf70kaKW1ckwBphv+3XHRUfL2wv2I/z2KF1Wxg=; h=Message-ID:Date:From:MIME-Version:To:CC:Subject:References: In-Reply-To:Content-Type; b=0BAVis6BYGwRWxkStK/U/0ipUEZBNKmGKkvYOywvXAdNHaEtf87CUyCHZ1LXt1mb1 pn8bntkyMYiazWGO1KmFE3AQ++5YOQBUNRLqEUxw3heNxN6hqsUVvG6lGFPhtMVT0t sirgQoHxHZzQhuYHYiIGH5mmkKCGSeJh/0FQNPkg= Message-ID: <4ECBC951.3080800@infracaninophile.co.uk> Date: Tue, 22 Nov 2011 16:09:53 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: Bas Smeelen References: <4ECBBD0B.6090600@ose.nl> In-Reply-To: <4ECBBD0B.6090600@ose.nl> X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enigFEBD744CE650CF78A0498C73" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Cc: FreeBSD Questions Subject: Re: 9.0-PRERELEASE slow scp transfer X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 16:09:58 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enigFEBD744CE650CF78A0498C73 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 22/11/2011 15:17, Bas Smeelen wrote: > When i copy a file with scp which is a few hundred megabytes on2. from = 1.i > get about 130 KB/s >=20 > I can find nothing in the logs or netstat errors on this 9.0-PRERELEASE= box. > I have switched network kabels and ports on the switch. >=20 > How could i further investigate? Check the duplex settings in ifconfig(8) output on all three machines. They should all say: media: Ethernet autoselect (1000baseTX ) assuming you're not forcing everything to a particular speed. Any mention of '100baseTX ' indicates a failure to negotiate the link settings, which could well be due to a hardware problem. Mind you, in that case you'ld see plenty of errors in the output of 'netstat -= i' If that's not the problem then it sounds like you've eliminated all the obvious causes. Which means a bug in 9.0-PRERELEASE, so please bring this up on freebsd-current@... where it should come to the attention of the developers working on getting 9.0 out of the door. Include 'pciconf -lbv' output for the NICs and PHYs on all three machines if you would be so kind. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------enigFEBD744CE650CF78A0498C73 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7LyVEACgkQ8Mjk52CukIzCBACeKUjfpMrpN/pAUZxdC5B+AKlr 3/YAn0f58c3b9A3OPlNv3C6GcJqmXKtr =+5BD -----END PGP SIGNATURE----- --------------enigFEBD744CE650CF78A0498C73-- From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 16:40:48 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C1F9C1065670 for ; Tue, 22 Nov 2011 16:40:48 +0000 (UTC) (envelope-from web@umich.edu) Received: from hackers.mr.itd.umich.edu (smtp.mail.umich.edu [141.211.14.81]) by mx1.freebsd.org (Postfix) with ESMTP id 7DA508FC0C for ; Tue, 22 Nov 2011 16:40:48 +0000 (UTC) Received: FROM itcom245.staff.itd.umich.edu (itcom245.staff.itd.umich.edu [141.213.135.249]) By hackers.mr.itd.umich.edu ID 4ECBD08E.44333.18777 ; Authuser web; 22 Nov 2011 11:40:46 EST Date: Tue, 22 Nov 2011 11:40:45 -0500 From: William Bulley To: Ian Smith Message-ID: <20111122164045.GA25322@itcom245.staff.itd.umich.edu> Mail-Followup-To: Ian Smith , Edward Martinez , freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i Cc: freebsd-questions@freebsd.org, Edward Martinez Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 16:40:48 -0000 According to Ian Smith on Sat, 11/19/11 at 13:29: > > Unfortunately that concentrates on creating a GPT layout, encouraging a > Linux-like single (plus a boot) partition - forget using dump/restore - > and says nothing much about installing over an existing setup with MBR > partitioning and multiple slices, a not uncommon setup on many existing > laptops .. eg here I want to install over a previous 7.2-RELEASE 60GB > slice partitioned as I want it - 1GB /, 4GB /var, 16GB /usr and ~37GB > /home. Further, I want to preserve /home as is, despite having backups. > > sysinstall's partitioning is more sophisticated; you get to specifically > toggle on or off newfs'ing each partition, as well as specifying newfs > options if you want. So it's clear whether you'll be newfs'ing / and > which other partitions, and which you'll be leaving alone, eg /home. > > On BETA1 I recorded "Extract Error while extracting base.txz: can't set > user=0/group=0 for /var/empty Can't update time for /var/empty .." which > someone/s else also reported, which turned out to be misleading .. the > basic problem is that the filesystem isn't empty, ie as after newfs. I hate to be a pest about this, but bsdinstall just isn't working for me. I grabbed the 9.0RC2 bootonly ISO for i386 and tried again to load this onto this Dell laptop. This time the *.txz files had to be gotten over the network which took longer that with the DVD1 ISO. :-( The files were fetched, and checked/verified, then the actual installation (extraction) began. Unfortunately, I got the same error pop-up message. This time I have the exact text of that error message: "Error while extracting base.txz: Can't set user=0/group=0 for var/emptyCan't update time for var/empty" Note the missing space or CR before the second "Can't" What confused me at first was the missing slash ("/") character before the two "var" pathnames. But I now understand that is because I am updating (not installing) from a previously working (was 8.2-STABLE in this case) system where the four partitions (root, swap, /var, and /usr) are present and full of FreeBSD files, etc. If this is a "feature" of bsdinstall, then it should be mentioned in the documentation somewhere. I used the "Manual" configuration method where I was asked to name the mount points for root, /var and /usr. My question is this: "if bsdinstall can't handle installing over top of an already existing system on disk, then why ask the user for mount points on those already existing partitions?" This seems weird to me. So now I am back to square one. I want to load 9.0RC2 onto this laptop for reasons that aren't relevant to this thread, yet I am unable to do so because as of 9.0 sysinstall has been replaced by bsdinstall. For the record, how do I upgrade to 9.0RC2 (or any 9.0 variant) from a system already running 8.2-STABLE? Had this attempt been using the sysinstall method, I would have long since been up and running FreeBSD 9.x on this laptop. Please advise. Thanks in advance. Regards, web... -- William Bulley Email: web@umich.edu 72 characters width template ----------------------------------------->| From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 16:43:54 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E9EBC106566C for ; Tue, 22 Nov 2011 16:43:54 +0000 (UTC) (envelope-from jmc-freebsd2@milibyte.co.uk) Received: from avasout08.plus.net (avasout08.plus.net [212.159.14.20]) by mx1.freebsd.org (Postfix) with ESMTP id 4ED1D8FC0C for ; Tue, 22 Nov 2011 16:43:54 +0000 (UTC) Received: from curlew.milibyte.co.uk ([84.92.153.232]) by avasout08 with smtp id 0Gjr1i003516WCc01GjsE0; Tue, 22 Nov 2011 16:43:52 +0000 X-CM-Score: 0.00 X-CNFS-Analysis: v=2.0 cv=c4YpsGBl c=1 sm=1 a=lfSX4pPLp9EkufIcToJk/A==:17 a=rLpCYgkgFLgA:10 a=ZTb9aqGL9YkA:10 a=8nJEP1OIZ-IA:10 a=6I5d2MoRAAAA:8 a=FzH6up1-wjFnidMVhXkA:9 a=wPNLvfGTeEIA:10 a=lfSX4pPLp9EkufIcToJk/A==:117 Received: by curlew.milibyte.co.uk with local (Exim 4.77) (envelope-from ) id 1RStRn-0000Yp-D1 for freebsd-questions@freebsd.org; Tue, 22 Nov 2011 16:43:51 +0000 From: Mike Clarke To: freebsd-questions@freebsd.org Date: Tue, 22 Nov 2011 16:43:51 +0000 User-Agent: KMail/1.9.10 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <201111221643.51220.jmc-freebsd2@milibyte.co.uk> X-SA-Exim-Connect-IP: X-SA-Exim-Mail-From: jmc-freebsd2@milibyte.co.uk X-SA-Exim-Scanned: No (on curlew.milibyte.co.uk); SAEximRunCond expanded to false Subject: Installing ZFS on 9.0-RC2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 16:43:55 -0000 I'm planning to upgrade to 9.0 soon and thought this might be a good opportunity to switch over to ZFS so I'm currently experimenting on a spare drive with the 9.0-RC2 DVD. I started off following the procedure in http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot but hit a problem in that the the new installer doesn't appear to provide a Fixit option. I've tried the shell and live cd options in the installer and also tried booting single user from the DVD but these all use the DVD as a read only root file system instead of the memory based file system in Fixit mode. I was able to get as far as creating a zpool but the first zfs create comand produced an error saying that it was unable to mount zroot/tmp. What's the correct approach to go about this with the 9.0-RC2 installer? -- Mike Clarke From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 18:18:15 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C8A2C106564A for ; Tue, 22 Nov 2011 18:18:15 +0000 (UTC) (envelope-from henry95@gmail.com) Received: from mail-vx0-f182.google.com (mail-vx0-f182.google.com [209.85.220.182]) by mx1.freebsd.org (Postfix) with ESMTP id 861E68FC0C for ; Tue, 22 Nov 2011 18:18:15 +0000 (UTC) Received: by vcbfl10 with SMTP id fl10so781183vcb.13 for ; Tue, 22 Nov 2011 10:18:14 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; bh=F0E7pubt9KLHptlpaO8uJTRvo/sX3T7t16tO7CJgqcE=; b=W7wJc3NEa/rJhXp2Aso4MoovQGZpOQpTyGz9BYkwlCBUkdxEHq1ygi5o/hWFszjz9Y YcCsuNhU6TycESDL5y7bkM9deCIkbH0hwSdGyyMhYhgBevmn7NOC4lKEQRD6100Kmrod yhOO3xGxm3j7p6TdZRxSuoqr3XqwC1IhGlWis= MIME-Version: 1.0 Received: by 10.52.38.6 with SMTP id c6mr22754857vdk.73.1321984256352; Tue, 22 Nov 2011 09:50:56 -0800 (PST) Received: by 10.52.114.132 with HTTP; Tue, 22 Nov 2011 09:50:56 -0800 (PST) Date: Tue, 22 Nov 2011 12:50:56 -0500 Message-ID: From: Henry M To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: reexec socketpair: No buffer space available X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 18:18:16 -0000 Hi all, Has anyone come across this error before: sshd[20861]: error: reexec socketpair: No buffer space available It stops remote users/services to connect to the machine remotely. I have 17 jails running on the machine. CPU load on the machine is low, and RAM usage is also low (16GB avail, 5GB Active) System info: FreeBSD 8.0-RELEASE-p6 FreeBSD 8.0-RELEASE-p6 $ netstat -mb 1029/4101/5130 mbufs in use (current/cache/total) 514/3446/3960/65536 mbuf clusters in use (current/cache/total/max) 0/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1582/1582/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1285K/14245K/15530K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/0/0 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 373686 requests for I/O initiated by sendfile 0 calls to protocol drain routines What else should I be looking for to help me trouble this? I know I'm hitting some limit, but not sure which one. Any help would be much appreciated. Thanks, Henry From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 18:36:19 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F19711065670 for ; Tue, 22 Nov 2011 18:36:19 +0000 (UTC) (envelope-from frank@esperance-linux.co.uk) Received: from asmtp1.iomartmail.com (asmtp1.iomartmail.com [62.128.201.248]) by mx1.freebsd.org (Postfix) with ESMTP id 6C1018FC0C for ; Tue, 22 Nov 2011 18:36:18 +0000 (UTC) Received: from asmtp1.iomartmail.com (localhost.localdomain [127.0.0.1]) by asmtp1.iomartmail.com (8.13.8/8.13.8) with ESMTP id pAMIaHZf007403 for ; Tue, 22 Nov 2011 18:36:17 GMT Received: from orange.esperance-linux.co.uk (host-92-22-121-215.as13285.net [92.22.121.215]) (authenticated bits=0) by asmtp1.iomartmail.com (8.13.8/8.13.8) with ESMTP id pAMIaHRK007392 for ; Tue, 22 Nov 2011 18:36:17 GMT Received: by orange.esperance-linux.co.uk (Postfix, from userid 1001) id D716833C1F; Tue, 22 Nov 2011 18:36:16 +0000 (GMT) Date: Tue, 22 Nov 2011 18:36:16 +0000 From: Frank Shute To: FreeBSD Questions Message-ID: <20111122183616.GA4124@orange.esperance-linux.co.uk> References: <20111122164045.GA25322@itcom245.staff.itd.umich.edu> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="8t9RHnE3ZwKMSgU+" Content-Disposition: inline In-Reply-To: <20111122164045.GA25322@itcom245.staff.itd.umich.edu> User-Agent: Mutt/1.4.2.3i X-Face: *}~{PHnDTzvXPe'wl_-f%!@+r5; VLhb':*DsX%wEOPg\fDrXWQJf|2\,92"DdS%63t*BHDyQ|OWo@Gfjcd72eaN!4%NE{0]p)ihQ1MyFNtWL X-Operating-System: FreeBSD 8.2-STABLE amd64 X-Organisation: 'shute.org.uk' Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Frank Shute List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 18:36:20 -0000 --8t9RHnE3ZwKMSgU+ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Nov 22, 2011 at 11:40:45AM -0500, William Bulley wrote: > > According to Ian Smith on Sat, 11/19/11 at 13:29: > >=20 > > Unfortunately that concentrates on creating a GPT layout, encouraging a= =20 > > Linux-like single (plus a boot) partition - forget using dump/restore - > > and says nothing much about installing over an existing setup with MBR= =20 > > partitioning and multiple slices, a not uncommon setup on many existing= =20 > > laptops .. eg here I want to install over a previous 7.2-RELEASE 60GB= =20 > > slice partitioned as I want it - 1GB /, 4GB /var, 16GB /usr and ~37GB= =20 > > /home. Further, I want to preserve /home as is, despite having backups. > >=20 > > sysinstall's partitioning is more sophisticated; you get to specificall= y=20 > > toggle on or off newfs'ing each partition, as well as specifying newfs= =20 > > options if you want. So it's clear whether you'll be newfs'ing / and= =20 > > which other partitions, and which you'll be leaving alone, eg /home. > >=20 > > On BETA1 I recorded "Extract Error while extracting base.txz: can't set= =20 > > user=3D0/group=3D0 for /var/empty Can't update time for /var/empty .." = which=20 > > someone/s else also reported, which turned out to be misleading .. the= =20 > > basic problem is that the filesystem isn't empty, ie as after newfs. >=20 > I hate to be a pest about this, but bsdinstall just isn't working for me. > I grabbed the 9.0RC2 bootonly ISO for i386 and tried again to load this > onto this Dell laptop. This time the *.txz files had to be gotten over > the network which took longer that with the DVD1 ISO. :-( >=20 > The files were fetched, and checked/verified, then the actual installation > (extraction) began. Unfortunately, I got the same error pop-up message. > This time I have the exact text of that error message: >=20 > "Error while extracting base.txz: Can't > set user=3D0/group=3D0 for var/emptyCan't > update time for var/empty" >=20 > Note the missing space or CR before the second "Can't" >=20 > What confused me at first was the missing slash ("/") character before the > two "var" pathnames. But I now understand that is because I am updating > (not installing) from a previously working (was 8.2-STABLE in this case) > system where the four partitions (root, swap, /var, and /usr) are present > and full of FreeBSD files, etc. >=20 > If this is a "feature" of bsdinstall, then it should be mentioned in the > documentation somewhere. I used the "Manual" configuration method where > I was asked to name the mount points for root, /var and /usr. My question > is this: "if bsdinstall can't handle installing over top of an already > existing system on disk, then why ask the user for mount points on those > already existing partitions?" This seems weird to me. >=20 > So now I am back to square one. I want to load 9.0RC2 onto this laptop > for reasons that aren't relevant to this thread, yet I am unable to do > so because as of 9.0 sysinstall has been replaced by bsdinstall. =20 >=20 > For the record, how do I upgrade to 9.0RC2 (or any 9.0 variant) from a > system already running 8.2-STABLE? Had this attempt been using the > sysinstall method, I would have long since been up and running FreeBSD > 9.x on this laptop. Please advise. Thanks in advance. Can't help you with your bsdinstall woes but to upgrade from 8.2-STABLE to 9.0-RELEASE(currently RC2) branch you want to do a csup(1)/buildworld cycle. http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html You should use the tag: *default release=3Dcvs tag=3DRELENG_9_0 in your supfile. More details at: http://www.shute.org.uk/misc/freebsd_uptodate.html Regards, --=20 Frank Contact info: http://www.shute.org.uk/misc/contact.html --8t9RHnE3ZwKMSgU+ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (FreeBSD) iEYEARECAAYFAk7L658ACgkQHduKvUAgeK4zfwCgnUymYXlXNelEb7INBCJ0F9Tx HnMAoIoLc3DdX6dNDUCpPzZPOZadyD26 =oPWg -----END PGP SIGNATURE----- --8t9RHnE3ZwKMSgU+-- From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 18:56:25 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C659E1065679 for ; Tue, 22 Nov 2011 18:56:25 +0000 (UTC) (envelope-from web@umich.edu) Received: from hackers.mr.itd.umich.edu (smtp.mail.umich.edu [141.211.14.81]) by mx1.freebsd.org (Postfix) with ESMTP id 835968FC1A for ; Tue, 22 Nov 2011 18:56:24 +0000 (UTC) Received: FROM itcom245.staff.itd.umich.edu (itcom245.staff.itd.umich.edu [141.213.135.249]) By hackers.mr.itd.umich.edu ID 4ECBF058.1CB13.30740 ; Authuser web; 22 Nov 2011 13:56:24 EST Date: Tue, 22 Nov 2011 13:56:23 -0500 From: William Bulley To: Frank Shute Message-ID: <20111122185623.GA25594@itcom245.staff.itd.umich.edu> Mail-Followup-To: Frank Shute , FreeBSD Questions Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i Cc: FreeBSD Questions Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 18:56:25 -0000 According to Frank Shute on Tue, 11/22/11 at 13:36: > > Can't help you with your bsdinstall woes but to upgrade from > 8.2-STABLE to 9.0-RELEASE(currently RC2) branch you want to do a > csup(1)/buildworld cycle. > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html > > You should use the tag: > > *default release=cvs tag=RELENG_9_0 > > in your supfile. More details at: > > http://www.shute.org.uk/misc/freebsd_uptodate.html Thanks. :) Perhaps you came into this thread late, but that was my first attempt. But at that time, a few weeks ago, we were still at 9.0RC1 and my then buildworld/installworld attempt failed during the kernel compile step. Now that 9.0RC2 is available, I reckon it is worth a try dealing with the csup/buildworld/installworld process. I hope this works this time. Regards, web... -- William Bulley Email: web@umich.edu 72 characters width template ----------------------------------------->| From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 19:09:56 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D04271065675 for ; Tue, 22 Nov 2011 19:09:56 +0000 (UTC) (envelope-from amvandemore@gmail.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 61E758FC17 for ; Tue, 22 Nov 2011 19:09:55 +0000 (UTC) Received: by faap15 with SMTP id p15so1109582faa.13 for ; Tue, 22 Nov 2011 11:09:55 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=9gh2f4NnG2Ir6hxXvygeAVGRpquCfrdLo5LR0+eZDYM=; b=hWHLnVrz1OiLcTeL8XYya9BQtXJZygGkR6fVi0XFpwYor17yuuURaJsC3v2q2oHtTD NAGmKL/cllXGd2VoSxk5NOh48kdvzDK612Qb1FkMVWo1WRf9efYEJ8b/28eAhSchhTet /ap3QCgyi+VSUJmVo9MMRY7GFiSV/DPEJzAEc= MIME-Version: 1.0 Received: by 10.204.152.66 with SMTP id f2mr20513428bkw.137.1321988994954; Tue, 22 Nov 2011 11:09:54 -0800 (PST) Received: by 10.223.88.72 with HTTP; Tue, 22 Nov 2011 11:09:54 -0800 (PST) In-Reply-To: References: Date: Tue, 22 Nov 2011 13:09:54 -0600 Message-ID: From: Adam Vande More To: Henry M Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: reexec socketpair: No buffer space available X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 19:09:56 -0000 On Tue, Nov 22, 2011 at 11:50 AM, Henry M wrote: > Hi all, > > Has anyone come across this error before: > sshd[20861]: error: reexec socketpair: No buffer space available > > It stops remote users/services to connect to the machine remotely. I have > 17 jails running on the machine. > CPU load on the machine is low, and RAM usage is also low (16GB avail, 5GB > Active) > > System info: > FreeBSD 8.0-RELEASE-p6 FreeBSD 8.0-RELEASE-p6 > > $ netstat -mb > 1029/4101/5130 mbufs in use (current/cache/total) > 514/3446/3960/65536 mbuf clusters in use (current/cache/total/max) > 0/1536 mbuf+clusters out of packet secondary zone in use (current/cache) > 0/1582/1582/12800 4k (page size) jumbo clusters in use > (current/cache/total/max) > 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) > 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) > 1285K/14245K/15530K bytes allocated to network (current/cache/total) > 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) > 0/0/0 requests for jumbo clusters denied (4k/9k/16k) > 0/0/0 sfbufs in use (current/peak/max) > 0 requests for sfbufs denied > 0 requests for sfbufs delayed > 373686 requests for I/O initiated by sendfile > 0 calls to protocol drain routines > > > What else should I be looking for to help me trouble this? I know I'm > hitting some limit, but not sure which one. > > Any help would be much appreciated. > http://unix.derkeiler.com/Mailing-Lists/FreeBSD/stable/2007-03/msg00764.html So sysctl's like net.inet.tcp.recvbuf_max might play role here, but I would be curious as to what is the reason this comes up in the first place. Is the traffic to system valid, and hence raising the limits would be the correct course of action. Or do you have some deeper problem which limit raising would only mask or temporarily alleviate the issue. -- Adam Vande More From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 20:24:25 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6A266106564A for ; Tue, 22 Nov 2011 20:24:25 +0000 (UTC) (envelope-from frank@esperance-linux.co.uk) Received: from asmtp1.iomartmail.com (asmtp1.iomartmail.com [62.128.201.248]) by mx1.freebsd.org (Postfix) with ESMTP id D79668FC1A for ; Tue, 22 Nov 2011 20:24:24 +0000 (UTC) Received: from asmtp1.iomartmail.com (localhost.localdomain [127.0.0.1]) by asmtp1.iomartmail.com (8.13.8/8.13.8) with ESMTP id pAMKONuk010742 for ; Tue, 22 Nov 2011 20:24:23 GMT Received: from orange.esperance-linux.co.uk (host-92-22-121-215.as13285.net [92.22.121.215]) (authenticated bits=0) by asmtp1.iomartmail.com (8.13.8/8.13.8) with ESMTP id pAMKOMHU010732 for ; Tue, 22 Nov 2011 20:24:22 GMT Received: by orange.esperance-linux.co.uk (Postfix, from userid 1001) id ACC9D33C1F; Tue, 22 Nov 2011 20:24:22 +0000 (GMT) Date: Tue, 22 Nov 2011 20:24:22 +0000 From: Frank Shute To: FreeBSD Questions Message-ID: <20111122202422.GB4124@orange.esperance-linux.co.uk> References: <20111122185623.GA25594@itcom245.staff.itd.umich.edu> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="yNb1oOkm5a9FJOVX" Content-Disposition: inline In-Reply-To: <20111122185623.GA25594@itcom245.staff.itd.umich.edu> User-Agent: Mutt/1.4.2.3i X-Face: *}~{PHnDTzvXPe'wl_-f%!@+r5; VLhb':*DsX%wEOPg\fDrXWQJf|2\,92"DdS%63t*BHDyQ|OWo@Gfjcd72eaN!4%NE{0]p)ihQ1MyFNtWL X-Operating-System: FreeBSD 8.2-STABLE amd64 X-Organisation: 'shute.org.uk' Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Frank Shute List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 20:24:25 -0000 --yNb1oOkm5a9FJOVX Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Nov 22, 2011 at 01:56:23PM -0500, William Bulley wrote: > > According to Frank Shute on Tue, 11/22/11 at 13:36: > >=20 > > Can't help you with your bsdinstall woes but to upgrade from > > 8.2-STABLE to 9.0-RELEASE(currently RC2) branch you want to do a > > csup(1)/buildworld cycle. > >=20 > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html > >=20 > > You should use the tag: > >=20 > > *default release=3Dcvs tag=3DRELENG_9_0 > >=20 > > in your supfile. More details at: > >=20 > > http://www.shute.org.uk/misc/freebsd_uptodate.html >=20 > Thanks. :) >=20 > Perhaps you came into this thread late, but that was my first attempt. > But at that time, a few weeks ago, we were still at 9.0RC1 and my then > buildworld/installworld attempt failed during the kernel compile step. Sorry, William. I deleted the rest of the thread & then forgot what the thread was originally about :) Put it down to senility. >=20 > Now that 9.0RC2 is available, I reckon it is worth a try dealing with > the csup/buildworld/installworld process. I hope this works this time. Best of luck! >=20 > Regards, >=20 > web... >=20 Regards, --=20 Frank Contact info: http://www.shute.org.uk/misc/contact.html --yNb1oOkm5a9FJOVX Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (FreeBSD) iEYEARECAAYFAk7MBPUACgkQHduKvUAgeK7hNgCcCsuos2dDz53hqkzCz7EmuWOv RlMAniSN7s7CaelSUg3YWdGoAT2g4VCI =IEbw -----END PGP SIGNATURE----- --yNb1oOkm5a9FJOVX-- From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 21:03:59 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B669B106566C for ; Tue, 22 Nov 2011 21:03:59 +0000 (UTC) (envelope-from kjkoster@gmail.com) Received: from mail-yx0-f182.google.com (mail-yx0-f182.google.com [209.85.213.182]) by mx1.freebsd.org (Postfix) with ESMTP id 793DE8FC16 for ; Tue, 22 Nov 2011 21:03:59 +0000 (UTC) Received: by yenq9 with SMTP id q9so945607yen.13 for ; Tue, 22 Nov 2011 13:03:58 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:content-type:content-transfer-encoding:subject:date:message-id :to:mime-version:x-mailer; bh=/dL7uqRATaj7XVctAhaO3McCN9OaEoV0yhI82lLwzj4=; b=DvU3DrERcbk0UKl8bs4T9RyXueTMWsqlZ0Qe6qLz8jMCWNPA4vl0DNJbeATvJ9JW62 W35zsESSYE+kiG6RfO/tiaH+1otVYmSL5ZJZQiDni3IpWaY++/qyzNkGKGNzgVzBJfBA l6Jzhk5NsmfYAIS3ezSlaTFDcJO3SAtkOEQe4= Received: by 10.14.4.196 with SMTP id 44mr1498466eej.224.1321993991189; Tue, 22 Nov 2011 12:33:11 -0800 (PST) Received: from macbookpro.fritz.box (kjkoster.org. [83.163.197.206]) by mx.google.com with ESMTPS id o4sm45177684eeb.0.2011.11.22.12.33.09 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 22 Nov 2011 12:33:09 -0800 (PST) From: Kees Jan Koster Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Date: Tue, 22 Nov 2011 21:33:08 +0100 Message-Id: To: freebsd-questions@freebsd.org Mime-Version: 1.0 (Apple Message framework v1251.1) X-Mailer: Apple Mail (2.1251.1) Subject: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 21:03:59 -0000 Dear All, I am stuck with a machine that shows serious packet loss (about 1% of = all traffic is dropped). I tried the obvious (new network cable, = different switch port, different ethernet interface on the machine), but = the problems remain. Another machine that sits in the same rack and is hooked up to the same = switch shows no such packet loss issues. The problematic machine is a = dual Opteron with FreeBSD 8.2-STABLE from Thu Aug 11 14:05:47 CEST 2011. The machine is lightly loaded. A MySQL slave is running, but the machine = is not serving queries. Plus a Munin server process. I am at a loss where to start diagnosing this. Can you advise me where = to look? Are there network buffers that may be overflowing? -- Kees Jan http://java-monitor.com/ kjkoster@kjkoster.org +31651838192 Change is good. Granted, it is good in retrospect, but change is good. From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 21:04:03 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 20B701065673 for ; Tue, 22 Nov 2011 21:04:03 +0000 (UTC) (envelope-from jimmiejaz@gmail.com) Received: from mail-qy0-f182.google.com (mail-qy0-f182.google.com [209.85.216.182]) by mx1.freebsd.org (Postfix) with ESMTP id BD96A8FC0A for ; Tue, 22 Nov 2011 21:04:02 +0000 (UTC) Received: by qyg36 with SMTP id 36so724952qyg.13 for ; Tue, 22 Nov 2011 13:04:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=message-id:date:from:reply-to:user-agent:mime-version:to:cc:subject :content-type:content-transfer-encoding; bh=JuZJkhmdLRuCNXY256vm6+GUEaCrSLZd2dkZfMrF0HE=; b=KV6rWHRyvkL0nfJyt7rARywrIlUeK3IxASnrP8cDiiXVEDc14TFkoiTOFiS8FF51iv N74CNplkNu9aEETCRZP88ykUGEsUBiw6eRl4XSQ3868zIRQ/oXfq+/g+qlr0XjZgM20b 4wuO/nrubZgnJordENLRoIYkP/INrkABIU1CA= Received: by 10.224.33.76 with SMTP id g12mr9650997qad.46.1321995841382; Tue, 22 Nov 2011 13:04:01 -0800 (PST) Received: from jimmiejaz.org (bas2-toronto44-1177753662.dsl.bell.ca. [70.51.24.62]) by mx.google.com with ESMTPS id bw9sm15243926qab.18.2011.11.22.13.03.59 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 22 Nov 2011 13:04:00 -0800 (PST) Message-ID: <4ECC0E34.3090509@gmail.com> Date: Tue, 22 Nov 2011 16:03:48 -0500 From: Jimmie James User-Agent: Mozilla/5.0 (X11; FreeBSD i386; rv:8.0) Gecko/20111108 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-x11@freebsd.org Subject: Consistent ATI lockups [mi] EQ overflowing. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: jimmiejaz@gmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 21:04:03 -0000 Symptoms: total lockup of X, Xorg pegged at 100% CPU time, LEDs don't work, keyboard is usless. SSH in allows a clean shutdown, about 50% of the time. FreeBSD jimmiejaz.org 8.2-STABLE FreeBSD 8.2-STABLE #0: Sun Jun 26 08:42:45 EDT 2011 jimmie@jimmiejaz.org:/usr/obj/usr/src/sys/FORTYTWO i386 vgapci0: port 0xb800-0xb8ff mem 0xd0000000-0xdfffffff,0xff520000-0xff52ffff irq 19 at device 3.0 on pci6 drm0: on vgapci0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vgapci0@pci0:6:3:0: class=0x030000 card=0x51571002 chip=0x4c571002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'Mobility Radeon 7500 (M7 [LW])' class = display subclass = VGA xf86-video-ati-6.14.2 X.Org ati display driver About 50% of the time, this is last line printed in Xorg.0.log [mi] EQ overflowing. The server is probably stuck in an infinite loop http://pastebin.com/eXJC0qPB contains full dmesg, xorg.conf, Xorg.0.log, pkg_info of X/GL/Mesa bits and kernel config. Similar issues here. http://forums.freebsd.org/showthread.php?t=25540 Triggers: Opening Libreoffice, moving an image from firefox to pidgin, gimp or similar, using GQview, or similar. Opening Libreoffice results 100% lockup, instantly. Hardware acceleration is off in both firefox and Libreoffice. This has been going on since at least August and no one's been able to figure anything out either on the forums, or IRC. Maybe someone on the lists here might have an idea. From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 21:15:28 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 283101065698 for ; Tue, 22 Nov 2011 21:15:28 +0000 (UTC) (envelope-from Ggatten@waddell.com) Received: from emlpirnp0.waddell.com (emlpirnp0.waddell.com [67.130.252.22]) by mx1.freebsd.org (Postfix) with ESMTP id B38BB8FC13 for ; Tue, 22 Nov 2011 21:15:27 +0000 (UTC) Received: from mailhost2.waddell.com (HELO emlpfilt2.waddell.com) ([10.1.10.30]) by emlpirnp1.waddell.com with ESMTP; 22 Nov 2011 15:15:27 -0600 Received: from emlpfilt2.waddell.com (localhost [127.0.0.1]) by localhost (Postfix) with SMTP id F410F308003; Tue, 22 Nov 2011 15:15:26 -0600 (CST) Received: from ADVPHTCAS0.wradvisors.com (advphtcas0.wradvisors.com [192.168.203.228]) by emlpfilt2.waddell.com (Postfix) with ESMTP id EE0AC308002; Tue, 22 Nov 2011 15:15:26 -0600 (CST) Received: from WADPMBXV0.waddell.com ([169.254.1.85]) by ADVPHTCAS0.wradvisors.com ([192.168.203.228]) with mapi; Tue, 22 Nov 2011 15:15:26 -0600 From: Gary Gatten To: "'kjkoster@gmail.com'" , "'freebsd-questions@freebsd.org'" Date: Tue, 22 Nov 2011 15:15:25 -0600 Thread-Topic: Diagnosing packet loss Thread-Index: AcypWlSwWg1PON3aRb6PMaJkLPpWkAAAYWpT Message-ID: <2973_1321996526_4ECC10EE_2973_123_1_D9B37353831173459FDAA836D3B43499D2C69D77@WADPMBXV0.waddell.com> In-Reply-To: Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Cc: Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 21:15:28 -0000 Well, 1% is not good but I've seen worse for sure! Sounds like you tried t= he obvious. I would recommend a different IP to rule out a dupe ip; else i= t must be NIC related - either hardware or driver. Also, perhaps swap cabl= es and ports with a working machine and see if the problem follows or stays= put. ----- Original Message ----- From: Kees Jan Koster [mailto:kjkoster@gmail.com] Sent: Tuesday, November 22, 2011 02:33 PM To: freebsd-questions@freebsd.org Subject: Diagnosing packet loss Dear All, I am stuck with a machine that shows serious packet loss (about 1% of all t= raffic is dropped). I tried the obvious (new network cable, different switc= h port, different ethernet interface on the machine), but the problems rema= in. Another machine that sits in the same rack and is hooked up to the same swi= tch shows no such packet loss issues. The problematic machine is a dual Opt= eron with FreeBSD 8.2-STABLE from Thu Aug 11 14:05:47 CEST 2011. The machine is lightly loaded. A MySQL slave is running, but the machine is= not serving queries. Plus a Munin server process. I am at a loss where to start diagnosing this. Can you advise me where to l= ook? Are there network buffers that may be overflowing? -- Kees Jan http://java-monitor.com/ kjkoster@kjkoster.org +31651838192 Change is good. Granted, it is good in retrospect, but change is good. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
"This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system."
From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 21:23:09 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E0AF9106564A for ; Tue, 22 Nov 2011 21:23:09 +0000 (UTC) (envelope-from jmc-freebsd2@milibyte.co.uk) Received: from avasout07.plus.net (avasout07.plus.net [84.93.230.235]) by mx1.freebsd.org (Postfix) with ESMTP id 414248FC0A for ; Tue, 22 Nov 2011 21:23:08 +0000 (UTC) Received: from curlew.milibyte.co.uk ([84.92.153.232]) by avasout07 with smtp id 0MP61i002516WCc01MP7BW; Tue, 22 Nov 2011 21:23:07 +0000 X-CM-Score: 0.00 X-CNFS-Analysis: v=2.0 cv=cM9iQyiN c=1 sm=1 a=lfSX4pPLp9EkufIcToJk/A==:17 a=rLpCYgkgFLgA:10 a=wGnZKy7a1gsA:10 a=ZTb9aqGL9YkA:10 a=8nJEP1OIZ-IA:10 a=6I5d2MoRAAAA:8 a=pR3xYpNkAAAA:8 a=-jJesTWBYaeGkxTWuo4A:9 a=wPNLvfGTeEIA:10 a=lfSX4pPLp9EkufIcToJk/A==:117 Received: by curlew.milibyte.co.uk with local (Exim 4.77) (envelope-from ) id 1RSxo1-0000Zz-Ti for freebsd-questions@freebsd.org; Tue, 22 Nov 2011 21:23:06 +0000 From: Mike Clarke To: freebsd-questions@freebsd.org Date: Tue, 22 Nov 2011 21:23:05 +0000 User-Agent: KMail/1.9.10 References: <201111221643.51220.jmc-freebsd2@milibyte.co.uk> In-Reply-To: <201111221643.51220.jmc-freebsd2@milibyte.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <201111222123.05786.jmc-freebsd2@milibyte.co.uk> X-SA-Exim-Connect-IP: X-SA-Exim-Mail-From: jmc-freebsd2@milibyte.co.uk X-SA-Exim-Scanned: No (on curlew.milibyte.co.uk); SAEximRunCond expanded to false Subject: Re: Installing ZFS on 9.0-RC2 - Solved X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 21:23:10 -0000 On Tuesday 22 November 2011, Mike Clarke wrote: > I started off following the procedure in< > http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot but hit a problem in > that the the new installer doesn't appear to provide a Fixit option. > I've tried the shell and live cd options in the installer and also > tried booting single user from the DVD but these all use the DVD as a > read only root file system instead of the memory based file system in > Fixit mode. OK, I found a workaround at -- Mike Clarke From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 21:23:14 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 95CA3106564A for ; Tue, 22 Nov 2011 21:23:14 +0000 (UTC) (envelope-from cpghost@cordula.ws) Received: from mail-vw0-f54.google.com (mail-vw0-f54.google.com [209.85.212.54]) by mx1.freebsd.org (Postfix) with ESMTP id 599608FC15 for ; Tue, 22 Nov 2011 21:23:13 +0000 (UTC) Received: by vbbfa15 with SMTP id fa15so1018093vbb.13 for ; Tue, 22 Nov 2011 13:23:13 -0800 (PST) MIME-Version: 1.0 Received: by 10.182.188.34 with SMTP id fx2mr7903283obc.31.1321996992818; Tue, 22 Nov 2011 13:23:12 -0800 (PST) Received: by 10.182.187.8 with HTTP; Tue, 22 Nov 2011 13:23:12 -0800 (PST) X-Originating-IP: [93.221.181.49] In-Reply-To: <4ECC0E34.3090509@gmail.com> References: <4ECC0E34.3090509@gmail.com> Date: Tue, 22 Nov 2011 22:23:12 +0100 Message-ID: From: "C. P. Ghost" To: jimmiejaz@gmail.com Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: freebsd-x11@freebsd.org, freebsd-questions@freebsd.org Subject: Re: Consistent ATI lockups [mi] EQ overflowing. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 21:23:14 -0000 On Tue, Nov 22, 2011 at 10:03 PM, Jimmie James wrote: > Symptoms: total lockup of X, Xorg pegged at 100% CPU time, LEDs don't wor= k, > keyboard is usless. SSH in allows a clean shutdown, about 50% of the time= . > > FreeBSD jimmiejaz.org 8.2-STABLE FreeBSD 8.2-STABLE #0: Sun Jun 26 08:42:= 45 > EDT 2011 =A0 =A0 jimmie@jimmiejaz.org:/usr/obj/usr/src/sys/FORTYTWO =A0i3= 86 > vgapci0: port 0xb800-0xb8ff mem > 0xd0000000-0xdfffffff,0xff520000-0xff52ffff irq 19 at device 3.0 on pci6 > drm0: on vgapci0 > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > vgapci0@pci0:6:3:0: =A0 =A0 class=3D0x030000 card=3D0x51571002 chip=3D0x4= c571002 > rev=3D0x00 hdr=3D0x00 > =A0 =A0vendor =A0 =A0 =3D 'ATI Technologies Inc. / Advanced Micro Devices= , Inc.' > =A0 =A0device =A0 =A0 =3D 'Mobility Radeon 7500 (M7 [LW])' > =A0 =A0class =A0 =A0 =A0=3D display > =A0 =A0subclass =A0 =3D VGA > > xf86-video-ati-6.14.2 X.Org ati display driver Just to facilitate debugging, I see the very same behavior on 8.2-STABLE amd64 with the radeonhd driver: xf86-video-radeonhd-1.3.0_4 xorg-server-1.7.7_3,1 Xorg is struck in an endless loop, consuming 100% CPU. Yes, I should have switched from radeonhd to ati, but I didn't yet on that machine. -cpghost. --=20 Cordula's Web. http://www.cordula.ws/ From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 21:58:19 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5370F1065672 for ; Tue, 22 Nov 2011 21:58:19 +0000 (UTC) (envelope-from kjkoster@gmail.com) Received: from mail-gy0-f182.google.com (mail-gy0-f182.google.com [209.85.160.182]) by mx1.freebsd.org (Postfix) with ESMTP id 0F7158FC0A for ; Tue, 22 Nov 2011 21:58:18 +0000 (UTC) Received: by ghbg15 with SMTP id g15so402147ghb.13 for ; Tue, 22 Nov 2011 13:58:18 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=subject:mime-version:content-type:from:in-reply-to:date:cc :content-transfer-encoding:message-id:references:to:x-mailer; bh=+ZGVLZ4RxG4rfs6NJg6Xbvn2+UcH2eijOqZWoBp429M=; b=G49lJCVtHhR9kuMwGwc3ijumsSTEME6pKS8lVTD431sJIHwOrtXPU2TygZesan462U UUqkPDMJt24JuvqciPR8jgxgKSSkwOAsfaqOCxWg4fijnBhYtiNbm5F6DRsimM4PLKHY QRN+/7UaMqSaE282rwU7pPWL87hm+7wKut2UU= Received: by 10.213.21.131 with SMTP id j3mr1132674ebb.95.1321999097797; Tue, 22 Nov 2011 13:58:17 -0800 (PST) Received: from macbookpro.fritz.box (kjkoster.org. [83.163.197.206]) by mx.google.com with ESMTPS id 5sm45762796eev.2.2011.11.22.13.58.16 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 22 Nov 2011 13:58:16 -0800 (PST) Mime-Version: 1.0 (Apple Message framework v1251.1) Content-Type: text/plain; charset=iso-8859-1 From: Kees Jan Koster In-Reply-To: <2973_1321996526_4ECC10EE_2973_123_1_D9B37353831173459FDAA836D3B43499D2C69D77@WADPMBXV0.waddell.com> Date: Tue, 22 Nov 2011 22:58:14 +0100 Content-Transfer-Encoding: quoted-printable Message-Id: <4B28ADC5-8325-442E-8F02-9AE3535D8C6D@gmail.com> References: <2973_1321996526_4ECC10EE_2973_123_1_D9B37353831173459FDAA836D3B43499D2C69D77@WADPMBXV0.waddell.com> To: Gary Gatten X-Mailer: Apple Mail (2.1251.1) Cc: "'freebsd-questions@freebsd.org'" Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 21:58:19 -0000 Dear Gary, Thank you for your reply. Your comment about dupe IP triggered something = that I failed to mention: the interface is aliased. It has two IP = addresses. IP address a and it has an alias IP address b. I just tested = binding mtr to each of these interfaces separately to measure packet = loss. If I use mtr to measure packet loss from saffron (the stricken machine) = to cumin (another machine in a different data center) I see the = following: saffron (ip address a) -> cumin: packet loss saffron (ip address b) -> cumin: no packet loss cumin -> saffron (ip address a): packet loss cumin -> saffron (ip address b): no packet loss This is consistent from running mtr for 5 minutes straight. This to me = shows that the hardware is fine. Using the alias IP address I can run = with no packet loss for as long as I like. Hum.... Could it be that my switch does not support IP aliasing? Then = why is there packet loss only on one IP and not on both? This is getting weirder and weirder. Kees Jan On 22 Nov 2011, at 22:15, Gary Gatten wrote: > Well, 1% is not good but I've seen worse for sure! Sounds like you = tried the obvious. I would recommend a different IP to rule out a dupe = ip; else it must be NIC related - either hardware or driver. Also, = perhaps swap cables and ports with a working machine and see if the = problem follows or stays put. >=20 > ----- Original Message ----- > From: Kees Jan Koster [mailto:kjkoster@gmail.com] > Sent: Tuesday, November 22, 2011 02:33 PM > To: freebsd-questions@freebsd.org > Subject: Diagnosing packet loss >=20 > Dear All, >=20 > I am stuck with a machine that shows serious packet loss (about 1% of = all traffic is dropped). I tried the obvious (new network cable, = different switch port, different ethernet interface on the machine), but = the problems remain. >=20 > Another machine that sits in the same rack and is hooked up to the = same switch shows no such packet loss issues. The problematic machine is = a dual Opteron with FreeBSD 8.2-STABLE from Thu Aug 11 14:05:47 CEST = 2011. >=20 > The machine is lightly loaded. A MySQL slave is running, but the = machine is not serving queries. Plus a Munin server process. >=20 > I am at a loss where to start diagnosing this. Can you advise me where = to look? Are there network buffers that may be overflowing? > -- > Kees Jan >=20 > http://java-monitor.com/ > kjkoster@kjkoster.org > +31651838192 >=20 > Change is good. Granted, it is good in retrospect, but change is good. >=20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org" >=20 >=20 >=20 >=20 >=20 > >
>
> "This email is intended to be reviewed by only the intended recipient > and may contain information that is privileged and/or confidential. > If you are not the intended recipient, you are hereby notified that > any review, use, dissemination, disclosure or copying of this email > and its attachments, if any, is strictly prohibited. If you have > received this email in error, please immediately notify the sender by > return email and delete this email from your system." >
>=20 -- Kees Jan http://java-monitor.com/ kjkoster@kjkoster.org +31651838192 I hate unit tests; I much prefer the illusion that there are no errors = in my code. -- = Hendrik Muller From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 21:59:12 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 81A40106566B for ; Tue, 22 Nov 2011 21:59:12 +0000 (UTC) (envelope-from norgaard@locolomo.org) Received: from mail.locolomo.org (97.pool85-48-194.static.orange.es [85.48.194.97]) by mx1.freebsd.org (Postfix) with ESMTP id E72F78FC1F for ; Tue, 22 Nov 2011 21:59:09 +0000 (UTC) Received: from gamma.lan.locolomo.org (gamma.lan.locolomo.org [192.168.0.33]) by mail.locolomo.org (Postfix) with ESMTPSA id BD10A1C0841 for ; Tue, 22 Nov 2011 22:43:08 +0100 (CET) Message-ID: <4ECC176C.3030001@locolomo.org> Date: Tue, 22 Nov 2011 22:43:08 +0100 From: =?ISO-8859-1?Q?Erik_N=F8rgaard?= User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: ACPI issues with Lenovo E520 /FBSD9.0-RC2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 21:59:12 -0000 Hi I tried booting FBSD90-RC2 from the USB boot image on a new Lenovo Edge E520 but there are problems with ACPI thermal zone 0 but there is no problem with thermal zone 1. From dmesg: ACPI Error: No handler for Region [ECRM] (0xfffffe000442da80) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\\_TZ_.RDEC] (Node 0xfffffe0004380b80), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xfffffe0004380ac0), AE_NOT_EXIST (20110527/psparse-560) Message repeats. And sysctl: hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: -273.2C hw.acpi.thermal.tz0.active: -2 hw.acpi.thermal.tz0.passive_cooling: 0 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 90.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 120.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz0._TC1: 0 hw.acpi.thermal.tz0._TC2: 50 hw.acpi.thermal.tz0._TSP: 0 hw.acpi.thermal.tz1.temperature: 27.0C hw.acpi.thermal.tz1.active: -1 hw.acpi.thermal.tz1.passive_cooling: 0 hw.acpi.thermal.tz1.thermal_flags: 0 hw.acpi.thermal.tz1._PSV: -1 hw.acpi.thermal.tz1._HOT: -1 hw.acpi.thermal.tz1._CRT: 120.0C hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz1._TC1: -1 hw.acpi.thermal.tz1._TC2: -1 hw.acpi.thermal.tz1._TSP: -1 Full dmesg and sysctl -a output at the end. So, my questions are: - can this be fixed? or is there a work around? - can I ignore this error? I have no idea which temperature fails to read and if it is critical against overheating. Thanks, Erik dmesg output: Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-RC2 #0: Sat Nov 12 18:35:25 UTC 2011 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 CPU: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (2394.61-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a Stepping = 7 Features=0xbfebfbff Features2=0x17bae3bf AMD Features=0x28100800 AMD Features2=0x1 TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8139313152 (7762 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: Power Button (fixed) acpi0: reservation of 20000000, 200000 (3) failed acpi0: reservation of 40000000, 200000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0x5000-0x503f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 pci0: at device 22.0 (no driver attached) ehci0: mem 0xd260a000-0xd260a3ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0: on ehci0 hdac0: mem 0xd2600000-0xd2603fff irq 22 at device 27.0 on pci0 pcib1: irq 16 at device 28.0 on pci0 pci1: on pcib1 pcib2: irq 17 at device 28.1 on pci0 pci2: on pcib2 re0: port 0x4000-0x40ff mem 0xd0404000-0xd0404fff,0xd0400000-0xd0403fff irq 17 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00000000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: f0:de:f1:99:0d:f0 pcib3: irq 18 at device 28.2 on pci0 pci3: on pcib3 pci3: at device 0.0 (no driver attached) pcib4: irq 19 at device 28.3 on pci0 pci8: on pcib4 iwn0: mem 0xd1d00000-0xd1d01fff irq 19 at device 0.0 on pci8 pcib5: irq 19 at device 28.7 on pci0 pci9: on pcib5 ehci1: mem 0xd2609000-0xd26093ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1: on ehci1 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0x5088-0x508f,0x5094-0x5097,0x5080-0x5087,0x5090-0x5093,0x5060-0x507f mem 0xd2608000-0xd26087ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 4 on ahci0 ahcich2: at channel 5 on ahci0 pci0: at device 31.3 (no driver attached) acpi_acad0: on acpi0 acpi_lid0: on acpi0 acpi_tz0: on acpi0 acpi_tz1: on acpi0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: on acpi0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: on cpu0 p4tcc0: on cpu0 est1: on cpu1 p4tcc1: on cpu1 est2: on cpu2 p4tcc2: on cpu2 est3: on cpu3 p4tcc3: on cpu3 Timecounters tick every 1.000 msec hdac0: HDA Codec #0: Conexant CX20590 hdac0: HDA Codec #3: Intel Cougar Point HDMI pcm0: at cad 0 nid 1 on hdac0 pcm1: at cad 0 nid 1 on hdac0 pcm2: at cad 3 nid 1 on hdac0 usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ACPI Error: No handler for Region [ECRM] (0xfffffe000442da80) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\\_TZ_.RDEC] (Node 0xfffffe0004380b80), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xfffffe0004380ac0), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: No handler for Region [ECRM] (0xfffffe000442dc00) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\\_TZ_.MDEC] (Node 0xfffffe0004380b40), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\\_TZ_.TZS0._SCP] (Node 0xfffffe0004380a40), AE_NOT_EXIST (20110527/psparse-560) ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors: 1H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device SMP: AP CPU #3 Launched! cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Timecounter "TSC-low" frequency 9353962 Hz quality 1000 Root mount waiting for: usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: at usbus0 uhub2: on usbus0 ugen1.2: at usbus1 uhub3: on usbus1 Root mount waiting for: usbus1 usbus0 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen0.3: at usbus0 ugen1.3: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:3:0:-1: Attached to scbus3 Root mount waiting for: usbus1 Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... mountroot: waiting for device /dev/ufs/FreeBSD_Install ... da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 7701MB (15771720 512 byte sectors: 255H 63S/T 981C) GEOM: da0: geometry does not match label (128h,17s != 255h,63s). GEOM: da0: media size does not match label. ACPI Error: No handler for Region [ECRM] (0xfffffe000442dd80) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\\_TZ_.RDEC] (Node 0xfffffe0004380b80), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xfffffe0004380ac0), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: No handler for Region [ECRM] (0xfffffe000442dd00) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\\_TZ_.RDEC] (Node 0xfffffe0004380b80), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xfffffe0004380ac0), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: No handler for Region [ECRM] (0xfffffe000442e280) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\\_TZ_.RDEC] (Node 0xfffffe0004380b80), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xfffffe0004380ac0), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: No handler for Region [ECRM] (0xfffffe000442de00) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\\_TZ_.RDEC] (Node 0xfffffe0004380b80), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xfffffe0004380ac0), AE_NOT_EXIST (20110527/psparse-560) systcl -a output: kern.ostype: FreeBSD kern.osrelease: 9.0-RC2 kern.osrevision: 199506 kern.version: FreeBSD 9.0-RC2 #0: Sat Nov 12 18:35:25 UTC 2011 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC kern.maxvnodes: 204922 kern.maxproc: 6164 kern.maxfiles: 12328 kern.argmax: 262144 kern.securelevel: -1 kern.hostname: kern.hostid: 0 kern.clockrate: { hz = 1000, tick = 1000, profhz = 8128, stathz = 127 } kern.posix1version: 200112 kern.ngroups: 1023 kern.job_control: 1 kern.saved_ids: 0 kern.boottime: { sec = 1322000923, usec = 552881 } Tue Nov 22 22:28:43 2011 kern.domainname: kern.osreldate: 900044 kern.bootfile: /boot/kernel/kernel kern.maxfilesperproc: 11095 kern.maxprocperuid: 5547 kern.ipc.maxsockbuf: 2097152 kern.ipc.sockbuf_waste_factor: 8 kern.ipc.somaxconn: 128 kern.ipc.max_linkhdr: 40 kern.ipc.max_protohdr: 60 kern.ipc.max_hdr: 100 kern.ipc.max_datalen: 68 kern.ipc.nmbjumbo16: 3200 kern.ipc.nmbjumbo9: 6400 kern.ipc.nmbjumbop: 12800 kern.ipc.nmbclusters: 25600 kern.ipc.piperesizeallowed: 1 kern.ipc.piperesizefail: 0 kern.ipc.pipeallocfail: 0 kern.ipc.pipefragretry: 0 kern.ipc.pipekva: 20480 kern.ipc.maxpipekva: 132464640 kern.ipc.msgseg: 2048 kern.ipc.msgssz: 8 kern.ipc.msgtql: 40 kern.ipc.msgmnb: 2048 kern.ipc.msgmni: 40 kern.ipc.msgmax: 16384 kern.ipc.semaem: 16384 kern.ipc.semvmx: 32767 kern.ipc.semusz: 632 kern.ipc.semume: 50 kern.ipc.semopm: 100 kern.ipc.semmsl: 340 kern.ipc.semmnu: 150 kern.ipc.semmns: 340 kern.ipc.semmni: 50 kern.ipc.shm_allow_removed: 0 kern.ipc.shm_use_phys: 0 kern.ipc.shmall: 131072 kern.ipc.shmseg: 128 kern.ipc.shmmni: 192 kern.ipc.shmmin: 1 kern.ipc.shmmax: 536870912 kern.ipc.maxsockets: 25600 kern.ipc.numopensockets: 9 kern.ipc.nsfbufsused: 0 kern.ipc.nsfbufspeak: 0 kern.ipc.nsfbufs: 0 kern.dummy: 0 kern.ps_strings: 140737488351200 kern.usrstack: 140737488351232 kern.logsigexit: 1 kern.iov_max: 1024 kern.hostuuid: 00000000-0000-0000-0000-000000000000 kern.cam.boot_delay: 0 kern.cam.pmp.default_timeout: 30 kern.cam.pmp.retry_count: 1 kern.cam.cam_srch_hi: 0 kern.cam.scsi_delay: 5000 kern.cam.cd.retry_count: 4 kern.cam.cd.changer.max_busy_seconds: 15 kern.cam.cd.changer.min_busy_seconds: 5 kern.cam.cd.0.minimum_cmd_size: 6 kern.cam.ada.write_cache: 1 kern.cam.ada.read_ahead: 1 kern.cam.ada.spindown_suspend: 1 kern.cam.ada.spindown_shutdown: 1 kern.cam.ada.ada_send_ordered: 1 kern.cam.ada.default_timeout: 30 kern.cam.ada.retry_count: 4 kern.cam.ada.legacy_aliases: 1 kern.cam.ada.0.read_ahead: -1 kern.cam.ada.0.write_cache: -1 kern.cam.da.da_send_ordered: 1 kern.cam.da.default_timeout: 60 kern.cam.da.retry_count: 4 kern.cam.da.0.minimum_cmd_size: 10 kern.dcons.poll_hz: 25 kern.tty_pty_warningcnt: 1 kern.disks: da0 cd0 ada0 kern.geom.disk.ada0.led: kern.geom.disk.cd0.led: kern.geom.disk.da0.led: kern.geom.collectstats: 1 kern.geom.debugflags: 0 kern.geom.conftxt: 0 DISK da0 8075120640 512 hd 255 sc 63 1 PART da0a 685228032 512 i 1 o 0 ty freebsd-ufs xs BSD xt 7 2 LABEL ufs/FreeBSD_Install 685228032 512 i 0 o 0 0 DISK cd0 0 2048 hd 0 sc 0 0 DISK ada0 500107862016 512 hd 1 sc 63 1 PART ada0s3 12582912000 512 i 3 o 487523876864 ty ntfs xs MBR xt 7 2 LABEL ntfs/Lenovo_Recovery 12582912000 512 i 0 o 0 1 PART ada0s2 486264537088 512 i 2 o 1259339776 ty ntfs xs MBR xt 7 2 LABEL ntfs/Windows7_OS 486264537088 512 i 0 o 0 1 PART ada0s1 1258291200 512 i 1 o 1048576 ty ntfs xs MBR xt 7 2 LABEL ntfs/SYSTEM_DRV 1258291200 512 i 0 o 0 0 MD md1 20971520 512 u 1 s 512 f 0 fs 0 l 20971520 t swap 0 MD md0 33554432 512 u 0 s 512 f 0 fs 0 l 33554432 t swap kern.geom.confdot: digraph geom { z0xfffffe0007b8c800 [shape=box,label="PART\nda0\nr#2"]; z0xfffffe0007b49b00 [label="r1w0e1"]; z0xfffffe0007b49b00 -> z0xfffffe0007b8c300; z0xfffffe0007b8c800 -> z0xfffffe0007b49b00; z0xfffffe0007f0a600 [shape=hexagon,label="da0a\nr1w0e1\nerr#0"]; z0xfffffe0007f0a600 -> z0xfffffe0007b8c800; z0xfffffe0007b8b900 [shape=box,label="PART\nada0\nr#2"]; z0xfffffe0007b87b00 [label="r0w0e0"]; z0xfffffe0007b87b00 -> z0xfffffe0007b8be00; z0xfffffe0007b8b900 -> z0xfffffe0007b87b00; z0xfffffe0007bfbd00 [shape=hexagon,label="ada0s3\nr0w0e0\nerr#0"]; z0xfffffe0007bfbd00 -> z0xfffffe0007b8b900; z0xfffffe0007bfc000 [shape=hexagon,label="ada0s2\nr0w0e0\nerr#0"]; z0xfffffe0007bfc000 -> z0xfffffe0007b8b900; z0xfffffe0007bfc200 [shape=hexagon,label="ada0s1\nr0w0e0\nerr#0"]; z0xfffffe0007bfc200 -> z0xfffffe0007b8b900; z0xfffffe0007f0a000 [shape=box,label="LABEL\nda0a\nr#3"]; z0xfffffe0007cc0100 [label="r1w0e1"]; z0xfffffe0007cc0100 -> z0xfffffe0007f0a600; z0xfffffe0007f0a000 -> z0xfffffe0007cc0100; z0xfffffe0007f09e00 [shape=hexagon,label="ufs/FreeBSD_Install\nr1w0e0\nerr#0"]; z0xfffffe0007f09e00 -> z0xfffffe0007f0a000; z0xfffffe0007bfb300 [shape=box,label="LABEL\nada0s3\nr#3"]; z0xfffffe0007bc5e00 [label="r0w0e0"]; z0xfffffe0007bc5e00 -> z0xfffffe0007bfbd00; z0xfffffe0007bfb300 -> z0xfffffe0007bc5e00; z0xfffffe0007bfb200 [shape=hexagon,label="ntfs/Lenovo_Recovery\nr0w0e0\nerr#0"]; z0xfffffe0007bfb200 -> z0xfffffe0007bfb300; z0xfffffe0007bfb600 [shape=box,label="LABEL\nada0s2\nr#3"]; z0xfffffe0007bc6000 [label="r0w0e0"]; z0xfffffe0007bc6000 -> z0xfffffe0007bfc000; z0xfffffe0007bfb600 -> z0xfffffe0007bc6000; z0xfffffe0007bfb500 [shape=hexagon,label="ntfs/Windows7_OS\nr0w0e0\nerr#0"]; z0xfffffe0007bfb500 -> z0xfffffe0007bfb600; z0xfffffe0007bfb900 [shape=box,label="LABEL\nada0s1\nr#3"]; z0xfffffe0007bc6080 [label="r0w0e0"]; z0xfffffe0007bc6080 -> z0xfffffe0007bfc200; z0xfffffe0007bfb900 -> z0xfffffe0007bc6080; z0xfffffe0007bfb800 [shape=hexagon,label="ntfs/SYSTEM_DRV\nr0w0e0\nerr#0"]; z0xfffffe0007bfb800 -> z0xfffffe0007bfb900; z0xfffffe0007b8c700 [shape=box,label="VFS\nffs.md1\nr#2"]; z0xfffffe000e1a4a00 [label="r1w1e1"]; z0xfffffe000e1a4a00 -> z0xfffffe0007b8c600; z0xfffffe0007b8c700 -> z0xfffffe000e1a4a00; z0xfffffe0007f1a800 [shape=box,label="VFS\nffs.md0\nr#2"]; z0xfffffe0007c18b80 [label="r1w1e1"]; z0xfffffe0007c18b80 -> z0xfffffe0007f1a500; z0xfffffe0007f1a800 -> z0xfffffe0007c18b80; z0xfffffe0007f19300 [shape=box,label="VFS\nffs.ufs/FreeBSD_Install\nr#4"]; z0xfffffe0007cc0000 [label="r1w0e0"]; z0xfffffe0007cc0000 -> z0xfffffe0007f09e00; z0xfffffe0007f19300 -> z0xfffffe0007cc0000; z0xfffffe0007b8c100 [shape=box,label="DISK\nda0\nr#1"]; z0xfffffe0007b8c300 [shape=hexagon,label="da0\nr1w0e1\nerr#0"]; z0xfffffe0007b8c300 -> z0xfffffe0007b8c100; z0xfffffe0007b8bc00 [shape=box,label="DISK\ncd0\nr#1"]; z0xfffffe0007b8bb00 [shape=hexagon,label="cd0\nr0w0e0\nerr#0"]; z0xfffffe0007b8bb00 -> z0xfffffe0007b8bc00; z0xfffffe0007b8c000 [shape=box,label="DISK\nada0\nr#1"]; z0xfffffe0007b8be00 [shape=hexagon,label="ada0\nr0w0e0\nerr#0"]; z0xfffffe0007b8be00 -> z0xfffffe0007b8c000; z0xfffffe0007b8c500 [shape=box,label="DEV\nmd1\nr#2"]; z0xfffffe0007bc6c80 [label="r0w0e0"]; z0xfffffe0007bc6c80 -> z0xfffffe0007b8c600; z0xfffffe0007b8c500 -> z0xfffffe0007bc6c80; z0xfffffe0007f0a200 [shape=box,label="DEV\nmd0\nr#2"]; z0xfffffe0007fd5680 [label="r0w0e0"]; z0xfffffe0007fd5680 -> z0xfffffe0007f1a500; z0xfffffe0007f0a200 -> z0xfffffe0007fd5680; z0xfffffe0007f0a100 [shape=box,label="DEV\nufs/FreeBSD_Install\nr#4"]; z0xfffffe0007bc6b00 [label="r0w0e0"]; z0xfffffe0007bc6b00 -> z0xfffffe0007f09e00; z0xfffffe0007f0a100 -> z0xfffffe0007bc6b00; z0xfffffe0007f0a400 [shape=box,label="DEV\nda0a\nr#3"]; z0xfffffe0007bc6800 [label="r0w0e0"]; z0xfffffe0007bc6800 -> z0xfffffe0007f0a600; z0xfffffe0007f0a400 -> z0xfffffe0007bc6800; z0xfffffe0007b8cd00 [shape=box,label="DEV\nda0\nr#2"]; z0xfffffe0007bc6680 [label="r0w0e0"]; z0xfffffe0007bc6680 -> z0xfffffe0007b8c300; z0xfffffe0007b8cd00 -> z0xfffffe0007bc6680; z0xfffffe0007b8ce00 [shape=box,label="DEV\nntfs/Lenovo_Recovery\nr#4"]; z0xfffffe0007bc5c80 [label="r0w0e0"]; z0xfffffe0007bc5c80 -> z0xfffffe0007bfb200; z0xfffffe0007b8ce00 -> z0xfffffe0007bc5c80; z0xfffffe0007bfc600 [shape=box,label="DEV\nntfs/Windows7_OS\nr#4"]; z0xfffffe0007b64380 [label="r0w0e0"]; z0xfffffe0007b64380 -> z0xfffffe0007bfb500; z0xfffffe0007bfc600 -> z0xfffffe0007b64380; z0xfffffe0007bfb000 [shape=box,label="DEV\nntfs/SYSTEM_DRV\nr#4"]; z0xfffffe0007bc5d00 [label="r0w0e0"]; z0xfffffe0007bc5d00 -> z0xfffffe0007bfb800; z0xfffffe0007bfb000 -> z0xfffffe0007bc5d00; z0xfffffe0007bfc900 [shape=box,label="DEV\nada0s3\nr#3"]; z0xfffffe0007b64680 [label="r0w0e0"]; z0xfffffe0007b64680 -> z0xfffffe0007bfbd00; z0xfffffe0007bfc900 -> z0xfffffe0007b64680; z0xfffffe0007bfcc00 [shape=box,label="DEV\nada0s2\nr#3"]; z0xfffffe0007b64900 [label="r0w0e0"]; z0xfffffe0007b64900 -> z0xfffffe0007bfc000; z0xfffffe0007bfcc00 -> z0xfffffe0007b64900; z0xfffffe0007bff000 [shape=box,label="DEV\nada0s1\nr#3"]; z0xfffffe0007b64b80 [label="r0w0e0"]; z0xfffffe0007b64b80 -> z0xfffffe0007bfc200; z0xfffffe0007bff000 -> z0xfffffe0007b64b80; z0xfffffe0007bff200 [shape=box,label="DEV\ncd0\nr#2"]; z0xfffffe0007b64d00 [label="r0w0e0"]; z0xfffffe0007b64d00 -> z0xfffffe0007b8bb00; z0xfffffe0007bff200 -> z0xfffffe0007b64d00; z0xfffffe0007bfbb00 [shape=box,label="DEV\nada0\nr#2"]; z0xfffffe0007bc6200 [label="r0w0e0"]; z0xfffffe0007bc6200 -> z0xfffffe0007b8be00; z0xfffffe0007bfbb00 -> z0xfffffe0007bc6200; z0xfffffe0007ff8000 [shape=box,label="MD\nmd1\nr#1"]; z0xfffffe0007b8c600 [shape=hexagon,label="md1\nr1w1e1\nerr#0"]; z0xfffffe0007b8c600 -> z0xfffffe0007ff8000; z0xfffffe0007f1a700 [shape=box,label="MD\nmd0\nr#1"]; z0xfffffe0007f1a500 [shape=hexagon,label="md0\nr1w1e1\nerr#0"]; z0xfffffe0007f1a500 -> z0xfffffe0007f1a700; }; kern.geom.confxml: FD PART da0 2 BSD 8 0 15771719 63 255 OK false r1w0e1 r1w0e1 da0a 685228032 512 0 0 0 1338335 1 freebsd-ufs 0 685228032 7 ada0 2 MBR 4 63 976773167 63 1 OK false r0w0e0 r0w0e0 ada0s3 12582912000 512 0 2192572416 952195072 976771071 3 ntfs 487523876864 12582912000 7 r0w0e0 ada0s2 486264537088 512 0 1259339776 2459648 952195071 2 ntfs 1259339776 486264537088 7 r0w0e0 ada0s1 1258291200 512 0 1048576 2048 2459647 1 ntfs 1048576 1258291200 7 active LABEL da0a 3 r1w0e1 r1w0e0 ufs/FreeBSD_Install 685228032 512 0 0 0 685228032 1338336 0 0 ada0s3 3 r0w0e0 r0w0e0 ntfs/Lenovo_Recovery 12582912000 512 0 2192572416 0 12582912000 24576000 0 0 ada0s2 3 r0w0e0 r0w0e0 ntfs/Windows7_OS 486264537088 512 0 1259339776 0 486264537088 949735424 0 0 ada0s1 3 r0w0e0 r0w0e0 ntfs/SYSTEM_DRV 1258291200 512 0 1048576 0 1258291200 2457600 0 0 VFS ffs.md1 2 r1w1e1 ffs.md0 2 r1w1e1 ffs.ufs/FreeBSD_Install 4 r1w0e0 DISK da0 1 r1w0e1 da0 8075120640 512 0 0 255 63 Ut165 USB Flash Disk cd0 1 r0w0e0 cd0 0 2048 0 0 0 0 Slimtype DVD A DS8A5SH ada0 1 r0w0e0 ada0 500107862016 512 0 0 1 63 ST9500420AS DEV md1 2 r0w0e0 md0 2 r0w0e0 ufs/FreeBSD_Install 4 r0w0e0 da0a 3 r0w0e0 da0 2 r0w0e0 ntfs/Lenovo_Recovery 4 r0w0e0 ntfs/Windows7_OS 4 r0w0e0 ntfs/SYSTEM_DRV 4 r0w0e0 ada0s3 3 r0w0e0 ada0s2 3 r0w0e0 ada0s1 3 r0w0e0 cd0 2 r0w0e0 ada0 2 r0w0e0 SWAP MD md1 1 r1w1e1 md1 20971520 512 0 0 1 512 0 0 20971520 swap md0 1 r1w1e1 md0 33554432 512 0 0 0 512 0 0 33554432 swap kern.geom.label.debug: 0 kern.geom.label.ext2fs.enable: 1 kern.geom.label.iso9660.enable: 1 kern.geom.label.msdosfs.enable: 1 kern.geom.label.ntfs.enable: 1 kern.geom.label.reiserfs.enable: 1 kern.geom.label.ufs.enable: 1 kern.geom.label.ufsid.enable: 1 kern.geom.label.gptid.enable: 1 kern.geom.label.gpt.enable: 1 kern.geom.part.check_integrity: 1 kern.elf64.nxstack: 0 kern.elf64.fallback_brand: -1 kern.init_shutdown_timeout: 120 kern.init_path: /sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init:/stand/sysinstall kern.acct_suspended: 0 kern.acct_configured: 0 kern.acct_chkfreq: 15 kern.acct_resume: 4 kern.acct_suspend: 2 kern.cp_times: 30 0 47 20 37374 3 0 7 0 37440 32 0 50 2 37366 0 0 1 0 37449 kern.cp_time: 65 0 105 22 149629 kern.constty_wakeups_per_second: 5 kern.consmsgbuf_size: 8192 kern.consmute: 0 kern.console: ttyv0,dcons,/dcons,ttyv0,ucom, kern.openfiles: 41 kern.eventtimer.choice: LAPIC(600) HPET(550) HPET1(440) HPET2(440) HPET3(440) HPET4(440) i8254(100) RTC(0) kern.eventtimer.et.LAPIC.flags: 7 kern.eventtimer.et.LAPIC.frequency: 49887811 kern.eventtimer.et.LAPIC.quality: 600 kern.eventtimer.et.HPET.flags: 7 kern.eventtimer.et.HPET.frequency: 14318180 kern.eventtimer.et.HPET.quality: 550 kern.eventtimer.et.HPET1.flags: 3 kern.eventtimer.et.HPET1.frequency: 14318180 kern.eventtimer.et.HPET1.quality: 440 kern.eventtimer.et.HPET2.flags: 3 kern.eventtimer.et.HPET2.frequency: 14318180 kern.eventtimer.et.HPET2.quality: 440 kern.eventtimer.et.HPET3.flags: 3 kern.eventtimer.et.HPET3.frequency: 14318180 kern.eventtimer.et.HPET3.quality: 440 kern.eventtimer.et.HPET4.flags: 3 kern.eventtimer.et.HPET4.frequency: 14318180 kern.eventtimer.et.HPET4.quality: 440 kern.eventtimer.et.RTC.flags: 17 kern.eventtimer.et.RTC.frequency: 32768 kern.eventtimer.et.RTC.quality: 0 kern.eventtimer.et.i8254.flags: 1 kern.eventtimer.et.i8254.frequency: 1193182 kern.eventtimer.et.i8254.quality: 100 kern.eventtimer.periodic: 0 kern.eventtimer.timer: LAPIC kern.eventtimer.idletick: 0 kern.eventtimer.singlemul: 2 kern.kq_calloutmax: 4096 kern.ps_arg_cache_limit: 256 kern.stackprot: 7 kern.randompid: 0 kern.lastpid: 1435 kern.ktrace.request_pool: 100 kern.ktrace.genio_size: 4096 kern.module_path: /boot/kernel;/boot/modules kern.malloc_count: 301 kern.fallback_elf_brand: -1 kern.features.scbus: 1 kern.features.ata_cam: 1 kern.features.nfscl: 1 kern.features.nfsd: 1 kern.features.geom_label: 1 kern.features.geom_part_bsd: 1 kern.features.geom_part_ebr_compat: 1 kern.features.geom_part_ebr: 1 kern.features.geom_part_gpt: 1 kern.features.geom_part_mbr: 1 kern.features.kposix_priority_scheduling: 1 kern.features.ktrace: 1 kern.features.compat_freebsd7: 1 kern.features.compat_freebsd6: 1 kern.features.compat_freebsd5: 1 kern.features.compat_freebsd4: 1 kern.features.hwpmc_hooks: 1 kern.features.stack: 1 kern.features.sysv_msg: 1 kern.features.sysv_sem: 1 kern.features.sysv_shm: 1 kern.features.posix_shm: 1 kern.features.inet: 1 kern.features.inet6: 1 kern.features.audit: 1 kern.features.security_mac: 1 kern.features.ffs_snapshot: 1 kern.features.softupdates: 1 kern.features.ufs_acl: 1 kern.features.ufs_gjournal: 1 kern.conftxt: options CONFIG_AUTOGENERATED ident GENERIC machine amd64 cpu HAMMER makeoptions DEBUG=-g options USB_DEBUG options AH_SUPPORT_AR5416 options IEEE80211_SUPPORT_MESH options IEEE80211_AMPDU_AGE options IEEE80211_DEBUG options SC_PIXEL_MODE options AHD_REG_PRETTY_PRINT options AHC_REG_PRETTY_PRINT options ATA_STATIC_ID options ATA_CAM options SMP options KDB_TRACE options KDB options INCLUDE_CONFIG_FILE options MAC options AUDIT options HWPMC_HOOKS options KBD_INSTALL_CDEV options PRINTF_BUFR_SIZE=128 options _KPOSIX_PRIORITY_SCHEDULING options SYSVSEM options SYSVMSG options SYSVSHM options STACK options KTRACE options SCSI_DELAY=5000 options COMPAT_FREEBSD7 options COMPAT_FREEBSD6 options COMPAT_FREEBSD5 options COMPAT_FREEBSD4 options COMPAT_FREEBSD32 options GEOM_LABEL options GEOM_PART_GPT options PSEUDOFS options PROCFS options CD9660 options MSDOSFS options NFS_ROOT options NFSLOCKD options NFSD options NFSCL options MD_ROOT options UFS_GJOURNAL options UFS_DIRHASH options UFS_ACL options SOFTUPDATES options FFS options SCTP options INET6 options INET options PREEMPTION options SCHED_ULE options NEW_PCIB options GEOM_PART_MBR options GEOM_PART_EBR_COMPAT options GEOM_PART_EBR options GEOM_PART_BSD device isa device mem device io device uart_ns8250 device cpufreq device acpi device pci device fdc device ahci device ata device mvs device siis device ahc device ahd device esp device hptiop device isp device mpt device mps device sym device trm device adv device adw device aic device bt device scbus device ch device da device sa device cd device pass device ses device amr device arcmsr device ciss device dpt device hptmv device hptrr device iir device ips device mly device twa device aac device aacp device ida device mfi device mlx device twe device tws device atkbdc device atkbd device psm device kbdmux device vga device splash device sc device agp device cbb device pccard device cardbus device uart device ppc device ppbus device lpt device plip device ppi device puc device bxe device de device em device igb device ixgbe device le device ti device txp device vx device miibus device ae device age device alc device ale device bce device bfe device bge device dc device et device fxp device jme device lge device msk device nfe device nge device pcn device re device rl device sf device sge device sis device sk device ste device stge device tl device tx device vge device vr device wb device xl device cs device ed device ex device ep device fe device sn device xe device wlan device wlan_wep device wlan_ccmp device wlan_tkip device wlan_amrr device an device ath device ath_pci device ath_hal device ath_rate_sample device ipw device iwi device iwn device malo device mwl device ral device wi device wpi device loop device random device ether device vlan device tun device pty device md device gif device faith device firmware device bpf device uhci device ohci device ehci device xhci device usb device uhid device ukbd device ulpt device umass device ums device urio device u3g device uark device ubsa device uftdi device uipaq device uplcom device uslcom device uvisor device uvscom device aue device axe device cdce device cue device kue device rue device udav device rum device run device uath device upgt device ural device urtw device zyd device firewire device fwe device fwip device dcons device dcons_crom device sound device snd_es137x device snd_hda device snd_ich device snd_uaudio device snd_via8233 kern.maxusers: 384 kern.ident: GENERIC kern.kstack_pages: 4 kern.shutdown.kproc_shutdown_wait: 60 kern.shutdown.poweroff_delay: 5000 kern.shutdown.show_busybufs: 0 kern.sync_on_panic: 0 kern.corefile: %N.core kern.nodump_coredump: 0 kern.coredump: 1 kern.sugid_coredump: 0 kern.sigqueue.alloc_fail: 0 kern.sigqueue.overflow: 0 kern.sigqueue.preallocate: 1024 kern.sigqueue.max_pending_per_proc: 128 kern.forcesigexit: 1 kern.fscale: 2048 kern.timecounter.tick: 1 kern.timecounter.choice: TSC-low(1000) i8254(0) HPET(950) ACPI-fast(900) dummy(-1000000) kern.timecounter.hardware: TSC-low kern.timecounter.stepwarnings: 0 kern.timecounter.tc.ACPI-fast.mask: 16777215 kern.timecounter.tc.ACPI-fast.counter: 5870532 kern.timecounter.tc.ACPI-fast.frequency: 3579545 kern.timecounter.tc.ACPI-fast.quality: 900 kern.timecounter.tc.HPET.mask: 4294967295 kern.timecounter.tc.HPET.counter: 425611738 kern.timecounter.tc.HPET.frequency: 14318180 kern.timecounter.tc.HPET.quality: 950 kern.timecounter.tc.i8254.mask: 65535 kern.timecounter.tc.i8254.counter: 37642 kern.timecounter.tc.i8254.frequency: 1193182 kern.timecounter.tc.i8254.quality: 0 kern.timecounter.tc.TSC-low.mask: 4294967295 kern.timecounter.tc.TSC-low.counter: 3084192944 kern.timecounter.tc.TSC-low.frequency: 9353962 kern.timecounter.tc.TSC-low.quality: 1000 kern.timecounter.smp_tsc: 1 kern.timecounter.invariant_tsc: 1 kern.threads.max_threads_hits: 0 kern.threads.max_threads_per_proc: 1500 kern.ccpu: 0 kern.sched.cpusetsize: 8 kern.sched.preemption: 1 kern.sched.topology_spec: 0, 1, 2, 3 0, 1, 2, 3 0, 1 THREAD groupSMT group 2, 3 THREAD groupSMT group kern.sched.steal_thresh: 2 kern.sched.steal_idle: 1 kern.sched.steal_htt: 1 kern.sched.balance_interval: 127 kern.sched.balance: 1 kern.sched.affinity: 1 kern.sched.idlespinthresh: 16 kern.sched.idlespins: 10000 kern.sched.static_boost: 152 kern.sched.preempt_thresh: 80 kern.sched.interact: 30 kern.sched.slice: 12 kern.sched.name: ULE kern.devstat.version: 6 kern.devstat.generation: 128 kern.devstat.numdevs: 8 kern.kobj_methodcount: 183 kern.log_wakeups_per_second: 5 kern.vm_guest: none kern.sgrowsiz: 131072 kern.maxssiz: 536870912 kern.dflssiz: 8388608 kern.maxdsiz: 34359738368 kern.dfldsiz: 134217728 kern.maxtsiz: 134217728 kern.maxbcache: 0 kern.maxswzone: 33554432 kern.msgbufsize: 65536 kern.nswbuf: 256 kern.nbuf: 52409 kern.ncallout: 18508 kern.hz: 1000 kern.msgbuf_clear: 0 kern.msgbuf: kern.always_console_output: 0 kern.log_console_add_linefeed: 0 kern.log_console_output: 1 kern.smp.forward_signal_enabled: 1 kern.smp.topology: 0 kern.smp.cpus: 4 kern.smp.disabled: 0 kern.smp.active: 1 kern.smp.maxcpus: 64 kern.smp.maxid: 3 kern.tty_inq_flush_secure: 1 kern.tty_nout: 25430 kern.tty_nin: 312 kern.minvnodes: 51230 kern.metadelay: 28 kern.dirdelay: 29 kern.filedelay: 30 kern.chroot_allow_open_directories: 1 kern.elf32.nxstack: 0 kern.elf32.fallback_brand: -1 kern.random.yarrow.gengateinterval: 10 kern.random.yarrow.bins: 10 kern.random.yarrow.fastthresh: 192 kern.random.yarrow.slowthresh: 256 kern.random.yarrow.slowoverthresh: 2 kern.random.sys.seeded: 1 kern.random.sys.harvest.ethernet: 1 kern.random.sys.harvest.point_to_point: 1 kern.random.sys.harvest.interrupt: 1 kern.random.sys.harvest.swi: 0 vm.vmtotal: System wide totals computed every five seconds: (values in kilobytes) =============================================== Processes: (RUNQ: 1 Disk Wait: 0 Page Wait: 0 Sleep: 14) Virtual Memory: (Total: 1074105188K Active: 223488K) Real Memory: (Total: 123960K Active: 13648K) Shared Virtual Memory: (Total: 8712K Active: 1828K) Shared Real Memory: (Total: 1980K Active: 1592K) Free Memory Pages: 7839988K vm.loadavg: { 0.01 0.16 0.10 } vm.v_free_min: 12655 vm.v_free_target: 53274 vm.v_free_reserved: 2654 vm.v_inactive_target: 79911 vm.v_cache_min: 53274 vm.v_cache_max: 106548 vm.v_pageout_free_min: 34 vm.pageout_algorithm: 0 vm.swap_enabled: 1 vm.md_malloc_wait: 0 vm.kmem_map_free: 8183103488 vm.kmem_map_size: 10883072 vm.kmem_size_scale: 1 vm.kmem_size_max: 329853485875 vm.kmem_size_min: 0 vm.kmem_size: 8193986560 vm.nswapdev: 0 vm.dmmax: 32 vm.swap_async_max: 4 vm.overcommit: 0 vm.swap_reserved: 193806336 vm.swap_total: 0 vm.zone_count: 86 vm.swap_idle_threshold2: 10 vm.swap_idle_threshold1: 2 vm.kstacks: 131 vm.kstack_cache_size: 128 vm.exec_map_entries: 16 vm.stats.misc.zero_page_count: 27 vm.stats.misc.cnt_prezero: 0 vm.stats.vm.v_kthreadpages: 0 vm.stats.vm.v_rforkpages: 0 vm.stats.vm.v_vforkpages: 6659 vm.stats.vm.v_forkpages: 714771 vm.stats.vm.v_kthreads: 19 vm.stats.vm.v_rforks: 0 vm.stats.vm.v_vforks: 14 vm.stats.vm.v_forks: 1402 vm.stats.vm.v_interrupt_free_min: 2 vm.stats.vm.v_pageout_free_min: 34 vm.stats.vm.v_cache_max: 106548 vm.stats.vm.v_cache_min: 53274 vm.stats.vm.v_cache_count: 9 vm.stats.vm.v_inactive_count: 2349 vm.stats.vm.v_inactive_target: 79911 vm.stats.vm.v_active_count: 2451 vm.stats.vm.v_wire_count: 35611 vm.stats.vm.v_free_count: 1959988 vm.stats.vm.v_free_min: 12655 vm.stats.vm.v_free_target: 53274 vm.stats.vm.v_free_reserved: 2654 vm.stats.vm.v_page_count: 2000485 vm.stats.vm.v_page_size: 4096 vm.stats.vm.v_tfree: 116714 vm.stats.vm.v_pfree: 56893 vm.stats.vm.v_dfree: 0 vm.stats.vm.v_tcached: 194 vm.stats.vm.v_pdpages: 0 vm.stats.vm.v_pdwakeups: 0 vm.stats.vm.v_reactivated: 161 vm.stats.vm.v_intrans: 8 vm.stats.vm.v_vnodepgsout: 0 vm.stats.vm.v_vnodepgsin: 1765 vm.stats.vm.v_vnodeout: 0 vm.stats.vm.v_vnodein: 234 vm.stats.vm.v_swappgsout: 0 vm.stats.vm.v_swappgsin: 0 vm.stats.vm.v_swapout: 0 vm.stats.vm.v_swapin: 0 vm.stats.vm.v_ozfod: 0 vm.stats.vm.v_zfod: 31307 vm.stats.vm.v_cow_optim: 357 vm.stats.vm.v_cow_faults: 44331 vm.stats.vm.v_vm_faults: 125382 vm.stats.sys.v_soft: 25854 vm.stats.sys.v_intr: 5510 vm.stats.sys.v_syscall: 180440 vm.stats.sys.v_trap: 101877 vm.stats.sys.v_swtch: 123185 vm.stats.object.bypasses: 427 vm.stats.object.collapses: 4093 vm.v_free_severe: 7654 vm.old_msync: 0 vm.tryrelock_restart: 0 vm.boot_pages: 64 vm.max_wired: 656282 vm.pageout_lock_miss: 0 vm.disable_swapspace_pageouts: 0 vm.defer_swapspace_pageouts: 0 vm.swap_idle_enabled: 0 vm.pageout_stats_interval: 5 vm.pageout_full_stats_interval: 20 vm.pageout_stats_max: 53274 vm.max_launder: 32 vm.phys_segs: SEGMENT 0: start: 0x1000 end: 0x9a000 domain: 0 free list: 0xffffffff81163f48 SEGMENT 1: start: 0x100000 end: 0x200000 domain: 0 free list: 0xffffffff81163f48 SEGMENT 2: start: 0x1403000 end: 0xba99f000 domain: 0 free list: 0xffffffff81163ba0 SEGMENT 3: start: 0xbafff000 end: 0xbb000000 domain: 0 free list: 0xffffffff81163ba0 SEGMENT 4: start: 0x100000000 end: 0x22ef2f000 domain: 0 free list: 0xffffffff81163ba0 vm.phys_free: FREE LIST 0: ORDER (SIZE) | NUMBER | POOL 0 | POOL 1 | POOL 2 -- -- -- -- -- -- -- -- 12 ( 16384K) | 472 | 0 | 0 11 ( 8192K) | 0 | 1 | 0 10 ( 4096K) | 4 | 0 | 0 9 ( 2048K) | 1 | 1 | 0 8 ( 1024K) | 1 | 1 | 0 7 ( 512K) | 1 | 1 | 0 6 ( 256K) | 1 | 1 | 0 5 ( 128K) | 3 | 0 | 0 4 ( 64K) | 4 | 0 | 0 3 ( 32K) | 6 | 0 | 0 2 ( 16K) | 14 | 2 | 1 1 ( 8K) | 10 | 13 | 1 0 ( 4K) | 1 | 5 | 3 FREE LIST 1: ORDER (SIZE) | NUMBER | POOL 0 | POOL 1 | POOL 2 -- -- -- -- -- -- -- -- 12 ( 16384K) | 0 | 0 | 0 11 ( 8192K) | 0 | 0 | 0 10 ( 4096K) | 0 | 0 | 0 9 ( 2048K) | 0 | 0 | 0 8 ( 1024K) | 1 | 0 | 0 7 ( 512K) | 0 | 0 | 0 6 ( 256K) | 1 | 0 | 0 5 ( 128K) | 1 | 0 | 0 4 ( 64K) | 2 | 0 | 0 3 ( 32K) | 2 | 0 | 0 2 ( 16K) | 0 | 0 | 0 1 ( 8K) | 2 | 0 | 0 0 ( 4K) | 0 | 0 | 0 vm.reserv.reclaimed: 0 vm.reserv.partpopq: LEVEL SIZE NUMBER -1: 71532K, 39 vm.reserv.freed: 3443 vm.reserv.broken: 0 vm.idlezero_enable: 0 vm.kvm_free: 540356374528 vm.kvm_size: 549755809792 vm.pmap.pmap_collect_active: 0 vm.pmap.pmap_collect_inactive: 0 vm.pmap.pv_entry_spare: 1121 vm.pmap.pv_entry_allocs: 844940 vm.pmap.pv_entry_frees: 837997 vm.pmap.pc_chunk_tryfail: 0 vm.pmap.pc_chunk_frees: 7135 vm.pmap.pc_chunk_allocs: 7183 vm.pmap.pc_chunk_count: 48 vm.pmap.pv_entry_count: 6943 vm.pmap.pdpe.demotions: 0 vm.pmap.pde.promotions: 20 vm.pmap.pde.p_failures: 8326 vm.pmap.pde.mappings: 0 vm.pmap.pde.demotions: 9 vm.pmap.shpgperproc: 200 vm.pmap.pv_entry_max: 3233285 vm.pmap.pg_ps_enabled: 1 vm.pmap.pat_works: 1 vfs.ufs.dirhash_reclaimage: 5 vfs.ufs.dirhash_lowmemcount: 0 vfs.ufs.dirhash_docheck: 0 vfs.ufs.dirhash_mem: 23099 vfs.ufs.dirhash_maxmem: 13410304 vfs.ufs.dirhash_minsize: 2560 vfs.ufs.rename_restarts: 0 vfs.nfs.downdelayinitial: 12 vfs.nfs.downdelayinterval: 30 vfs.nfs.keytab_enctype: 1 vfs.nfs.skip_wcc_data_onerr: 1 vfs.nfs.nfs3_jukebox_delay: 10 vfs.nfs.reconnects: 0 vfs.nfs.bufpackets: 4 vfs.nfs.callback_addr: vfs.nfs.realign_count: 0 vfs.nfs.realign_test: 0 vfs.nfs.nfs_directio_allow_mmap: 1 vfs.nfs.nfs_directio_enable: 0 vfs.nfs.clean_pages_on_close: 1 vfs.nfs.commit_on_close: 0 vfs.nfs.prime_access_cache: 0 vfs.nfs.access_cache_timeout: 60 vfs.nfs.diskless_rootpath: vfs.nfs.diskless_valid: 0 vfs.nfs.nfs_ip_paranoia: 1 vfs.nfs.defect: 0 vfs.nfs.iodmax: 20 vfs.nfs.iodmin: 0 vfs.nfs.iodmaxidle: 120 vfs.devfs.rule_depth: 1 vfs.devfs.generation: 114 vfs.nfsd.server_max_nfsvers: 4 vfs.nfsd.server_min_nfsvers: 2 vfs.nfsd.nfs_privport: 0 vfs.nfsd.enable_locallocks: 0 vfs.nfsd.issue_delegations: 0 vfs.nfsd.commit_miss: 0 vfs.nfsd.commit_blks: 0 vfs.nfsd.mirrormnt: 1 vfs.nfsd.minthreads: 1 vfs.nfsd.maxthreads: 1 vfs.nfsd.threads: 0 vfs.nfsd.request_space_used: 0 vfs.nfsd.request_space_used_highest: 0 vfs.nfsd.request_space_high: 13107200 vfs.nfsd.request_space_low: 8738133 vfs.nfsd.request_space_throttled: 0 vfs.nfsd.request_space_throttle_count: 0 vfs.pfs.trace: 0 vfs.pfs.vncache.misses: 0 vfs.pfs.vncache.hits: 0 vfs.pfs.vncache.maxentries: 0 vfs.pfs.vncache.entries: 0 vfs.acl_nfs4_old_semantics: 0 vfs.flushwithdeps: 0 vfs.notbufdflashes: 0 vfs.flushbufqtarget: 100 vfs.getnewbufrestarts: 0 vfs.getnewbufcalls: 731 vfs.hifreebuffers: 5832 vfs.lofreebuffers: 2916 vfs.numfreebuffers: 52404 vfs.dirtybufthresh: 11809 vfs.hidirtybuffers: 13122 vfs.lodirtybuffers: 6561 vfs.numdirtybuffers: 5 vfs.recursiveflushes: 0 vfs.altbufferflushes: 0 vfs.bdwriteskip: 0 vfs.dirtybufferflushes: 0 vfs.hirunningspace: 13434880 vfs.lorunningspace: 8978432 vfs.bufdefragcnt: 0 vfs.buffreekvacnt: 4 vfs.bufreusecnt: 715 vfs.hibufspace: 858013696 vfs.lobufspace: 857948160 vfs.maxmallocbufspace: 42900684 vfs.bufmallocspace: 0 vfs.maxbufspace: 858669056 vfs.bufspace: 12976128 vfs.runningbufspace: 0 vfs.vmiodirenable: 1 vfs.cache.numfullpathfound: 9 vfs.cache.numfullpathfail4: 0 vfs.cache.numfullpathfail2: 0 vfs.cache.numfullpathfail1: 0 vfs.cache.numfullpathcalls: 9 vfs.cache.numupgrades: 6 vfs.cache.numneghits: 1522 vfs.cache.numnegzaps: 27 vfs.cache.numposhits: 14570 vfs.cache.numposzaps: 26 vfs.cache.nummisszap: 4 vfs.cache.nummiss: 1024 vfs.cache.numchecks: 16153 vfs.cache.dotdothits: 11 vfs.cache.dothits: 374 vfs.cache.numcalls: 17561 vfs.cache.numcache: 439 vfs.cache.numneg: 27 vfs.ncsizefactor: 2 vfs.ncnegfactor: 16 vfs.read_max: 64 vfs.write_behind: 1 vfs.typenumhash: 1 vfs.lookup_shared: 1 vfs.usermount: 0 vfs.worklist_len: 3 vfs.timestamp_precision: 0 vfs.reassignbufcalls: 406 vfs.vlru_allow_cache_src: 0 vfs.freevnodes: 15 vfs.wantfreevnodes: 51230 vfs.numvnodes: 450 vfs.ffs.doreallocblks: 1 vfs.ffs.doasyncfree: 1 vfs.ffs.compute_summary_at_mount: 0 net.local.stream.recvspace: 8192 net.local.stream.sendspace: 8192 net.local.dgram.recvspace: 4096 net.local.dgram.maxdgram: 2048 net.local.seqpacket.recvspace: 8192 net.local.seqpacket.maxseqpacket: 8192 net.local.taskcount: 0 net.local.recycled: 0 net.local.deferred: 0 net.local.inflight: 0 net.inet.ip.portrange.randomtime: 45 net.inet.ip.portrange.randomcps: 10 net.inet.ip.portrange.randomized: 1 net.inet.ip.portrange.reservedlow: 0 net.inet.ip.portrange.reservedhigh: 1023 net.inet.ip.portrange.hilast: 65535 net.inet.ip.portrange.hifirst: 49152 net.inet.ip.portrange.last: 65535 net.inet.ip.portrange.first: 10000 net.inet.ip.portrange.lowlast: 600 net.inet.ip.portrange.lowfirst: 1023 net.inet.ip.forwarding: 0 net.inet.ip.redirect: 1 net.inet.ip.ttl: 64 net.inet.ip.rtexpire: 3600 net.inet.ip.rtminexpire: 10 net.inet.ip.rtmaxcache: 128 net.inet.ip.sourceroute: 0 net.inet.ip.intr_queue_maxlen: 256 net.inet.ip.intr_queue_drops: 0 net.inet.ip.accept_sourceroute: 0 net.inet.ip.keepfaith: 0 net.inet.ip.gifttl: 30 net.inet.ip.same_prefix_carp_only: 0 net.inet.ip.random_id_total: 0 net.inet.ip.random_id_collisions: 0 net.inet.ip.random_id_period: 8192 net.inet.ip.mcast.loop: 1 net.inet.ip.mcast.maxsocksrc: 128 net.inet.ip.mcast.maxgrpsrc: 512 net.inet.ip.fastforwarding: 0 net.inet.ip.maxfragpackets: 800 net.inet.ip.maxfragsperpacket: 16 net.inet.ip.fragpackets: 0 net.inet.ip.check_interface: 0 net.inet.ip.random_id: 0 net.inet.ip.sendsourcequench: 0 net.inet.ip.process_options: 1 net.inet.icmp.maskrepl: 0 net.inet.icmp.icmplim: 200 net.inet.icmp.bmcastecho: 0 net.inet.icmp.quotelen: 8 net.inet.icmp.reply_from_interface: 0 net.inet.icmp.reply_src: net.inet.icmp.log_redirect: 0 net.inet.icmp.drop_redirect: 0 net.inet.icmp.maskfake: 0 net.inet.icmp.icmplim_output: 1 net.inet.igmp.gsrdelay: 10 net.inet.igmp.default_version: 3 net.inet.igmp.legacysupp: 0 net.inet.igmp.v2enable: 1 net.inet.igmp.v1enable: 1 net.inet.igmp.sendlocal: 1 net.inet.igmp.sendra: 1 net.inet.igmp.recvifkludge: 1 net.inet.tcp.rfc1323: 1 net.inet.tcp.mssdflt: 536 net.inet.tcp.keepidle: 7200000 net.inet.tcp.keepintvl: 75000 net.inet.tcp.sendspace: 32768 net.inet.tcp.recvspace: 65536 net.inet.tcp.keepinit: 75000 net.inet.tcp.delacktime: 100 net.inet.tcp.v6mssdflt: 1220 net.inet.tcp.cc.available: newreno net.inet.tcp.cc.algorithm: newreno net.inet.tcp.hostcache.purge: 0 net.inet.tcp.hostcache.prune: 300 net.inet.tcp.hostcache.expire: 3600 net.inet.tcp.hostcache.count: 1 net.inet.tcp.hostcache.bucketlimit: 30 net.inet.tcp.hostcache.hashsize: 512 net.inet.tcp.hostcache.cachelimit: 15360 net.inet.tcp.recvbuf_max: 2097152 net.inet.tcp.recvbuf_inc: 16384 net.inet.tcp.recvbuf_auto: 1 net.inet.tcp.insecure_rst: 0 net.inet.tcp.ecn.maxretries: 1 net.inet.tcp.ecn.enable: 0 net.inet.tcp.abc_l_var: 2 net.inet.tcp.rfc3465: 1 net.inet.tcp.rfc3390: 1 net.inet.tcp.rfc3042: 1 net.inet.tcp.drop_synfin: 0 net.inet.tcp.delayed_ack: 1 net.inet.tcp.blackhole: 0 net.inet.tcp.log_in_vain: 0 net.inet.tcp.sendbuf_max: 2097152 net.inet.tcp.sendbuf_inc: 8192 net.inet.tcp.sendbuf_auto: 1 net.inet.tcp.tso: 1 net.inet.tcp.local_slowstart_flightsize: 4 net.inet.tcp.slowstart_flightsize: 1 net.inet.tcp.path_mtu_discovery: 1 net.inet.tcp.reass.overflows: 0 net.inet.tcp.reass.cursegments: 0 net.inet.tcp.reass.maxsegments: 1680 net.inet.tcp.sack.globalholes: 0 net.inet.tcp.sack.globalmaxholes: 65536 net.inet.tcp.sack.maxholes: 128 net.inet.tcp.sack.enable: 1 net.inet.tcp.soreceive_stream: 0 net.inet.tcp.isn_reseed_interval: 0 net.inet.tcp.icmp_may_rst: 1 net.inet.tcp.pcbcount: 0 net.inet.tcp.do_tcpdrain: 1 net.inet.tcp.tcbhashsize: 512 net.inet.tcp.log_debug: 0 net.inet.tcp.minmss: 216 net.inet.tcp.syncache.rst_on_sock_fail: 1 net.inet.tcp.syncache.rexmtlimit: 3 net.inet.tcp.syncache.hashsize: 512 net.inet.tcp.syncache.count: 0 net.inet.tcp.syncache.cachelimit: 15360 net.inet.tcp.syncache.bucketlimit: 30 net.inet.tcp.syncookies_only: 0 net.inet.tcp.syncookies: 1 net.inet.tcp.timer_race: 0 net.inet.tcp.per_cpu_timers: 0 net.inet.tcp.finwait2_timeout: 60000 net.inet.tcp.fast_finwait2_recycle: 0 net.inet.tcp.always_keepalive: 1 net.inet.tcp.rexmit_slop: 200 net.inet.tcp.rexmit_min: 30 net.inet.tcp.msl: 30000 net.inet.tcp.nolocaltimewait: 0 net.inet.tcp.maxtcptw: 5120 net.inet.udp.checksum: 1 net.inet.udp.maxdgram: 9216 net.inet.udp.recvspace: 42080 net.inet.udp.blackhole: 0 net.inet.udp.log_in_vain: 0 net.inet.sctp.use_dcccecn: 1 net.inet.sctp.rttvar_steady_step: 20 net.inet.sctp.rttvar_eqret: 0 net.inet.sctp.rttvar_rtt: 5 net.inet.sctp.rttvar_bw: 4 net.inet.sctp.initial_cwnd: 3 net.inet.sctp.buffer_splitting: 0 net.inet.sctp.vtag_time_wait: 60 net.inet.sctp.nat_friendly_init: 0 net.inet.sctp.enable_sack_immediately: 0 net.inet.sctp.udp_tunneling_port: 0 net.inet.sctp.udp_tunneling_for_client_enable: 0 net.inet.sctp.mobility_fasthandoff: 0 net.inet.sctp.mobility_base: 0 net.inet.sctp.default_frag_interleave: 1 net.inet.sctp.default_ss_module: 0 net.inet.sctp.default_cc_module: 0 net.inet.sctp.log_level: 0 net.inet.sctp.max_retran_chunk: 30 net.inet.sctp.min_residual: 1452 net.inet.sctp.strict_data_order: 0 net.inet.sctp.abort_at_limit: 0 net.inet.sctp.hb_max_burst: 4 net.inet.sctp.do_sctp_drain: 1 net.inet.sctp.max_chained_mbufs: 5 net.inet.sctp.abc_l_var: 1 net.inet.sctp.nat_friendly: 1 net.inet.sctp.auth_disable: 0 net.inet.sctp.asconf_auth_nochk: 0 net.inet.sctp.cwnd_maxburst: 1 net.inet.sctp.cmt_use_dac: 0 net.inet.sctp.nr_sack_on_off: 0 net.inet.sctp.cmt_on_off: 0 net.inet.sctp.outgoing_streams: 10 net.inet.sctp.add_more_on_output: 1452 net.inet.sctp.path_pf_threshold: 65535 net.inet.sctp.path_rtx_max: 5 net.inet.sctp.assoc_rtx_max: 10 net.inet.sctp.init_rtx_max: 8 net.inet.sctp.valid_cookie_life: 60000 net.inet.sctp.init_rto_max: 60000 net.inet.sctp.rto_initial: 3000 net.inet.sctp.rto_min: 1000 net.inet.sctp.rto_max: 60000 net.inet.sctp.secret_lifetime: 3600 net.inet.sctp.shutdown_guard_time: 180 net.inet.sctp.pmtu_raise_time: 600 net.inet.sctp.heartbeat_interval: 30000 net.inet.sctp.asoc_resource: 10 net.inet.sctp.sys_resource: 1000 net.inet.sctp.sack_freq: 2 net.inet.sctp.delayed_sack_time: 200 net.inet.sctp.chunkscale: 10 net.inet.sctp.min_split_point: 2904 net.inet.sctp.pcbhashsize: 256 net.inet.sctp.tcbhashsize: 1024 net.inet.sctp.maxchunks: 3200 net.inet.sctp.fr_maxburst: 4 net.inet.sctp.maxburst: 0 net.inet.sctp.peer_chkoh: 256 net.inet.sctp.strict_init: 1 net.inet.sctp.loopback_nocsum: 1 net.inet.sctp.strict_sacks: 1 net.inet.sctp.ecn_enable: 1 net.inet.sctp.auto_asconf: 1 net.inet.sctp.recvspace: 1864135 net.inet.sctp.sendspace: 1864135 net.inet.raw.recvspace: 9216 net.inet.raw.maxdgram: 9216 net.inet.accf.unloadable: 0 net.link.generic.system.ifcount: 5 net.link.ether.inet.log_arp_permanent_modify: 1 net.link.ether.inet.log_arp_movements: 1 net.link.ether.inet.log_arp_wrong_iface: 1 net.link.ether.inet.maxhold: 1 net.link.ether.inet.wait: 20 net.link.ether.inet.proxyall: 0 net.link.ether.inet.useloopback: 1 net.link.ether.inet.maxtries: 5 net.link.ether.inet.max_age: 1200 net.link.ether.ipfw: 0 net.link.vlan.soft_pad: 0 net.link.gif.parallel_tunnels: 0 net.link.gif.max_nesting: 1 net.link.log_link_state_change: 1 net.link.ifqmaxlen: 50 net.link.tun.devfs_cloning: 1 net.inet6.ip6.forwarding: 0 net.inet6.ip6.redirect: 1 net.inet6.ip6.hlim: 64 net.inet6.ip6.maxfragpackets: 6400 net.inet6.ip6.accept_rtadv: 0 net.inet6.ip6.keepfaith: 0 net.inet6.ip6.log_interval: 5 net.inet6.ip6.hdrnestlimit: 15 net.inet6.ip6.dad_count: 1 net.inet6.ip6.auto_flowlabel: 1 net.inet6.ip6.defmcasthlim: 1 net.inet6.ip6.gifhlim: 30 net.inet6.ip6.kame_version: FreeBSD net.inet6.ip6.use_deprecated: 1 net.inet6.ip6.rr_prune: 5 net.inet6.ip6.v6only: 1 net.inet6.ip6.rtexpire: 3600 net.inet6.ip6.rtminexpire: 10 net.inet6.ip6.rtmaxcache: 128 net.inet6.ip6.use_tempaddr: 0 net.inet6.ip6.temppltime: 86400 net.inet6.ip6.tempvltime: 604800 net.inet6.ip6.auto_linklocal: 1 net.inet6.ip6.prefer_tempaddr: 0 net.inet6.ip6.use_defaultzone: 0 net.inet6.ip6.maxfrags: 6400 net.inet6.ip6.mcast_pmtu: 0 net.inet6.ip6.no_radr: 0 net.inet6.ip6.norbit_raif: 0 net.inet6.ip6.rfc6204w3: 0 net.inet6.ip6.mcast.loop: 1 net.inet6.ip6.mcast.maxsocksrc: 128 net.inet6.ip6.mcast.maxgrpsrc: 512 net.inet6.icmp6.rediraccept: 1 net.inet6.icmp6.redirtimeout: 600 net.inet6.icmp6.nd6_prune: 1 net.inet6.icmp6.nd6_delay: 5 net.inet6.icmp6.nd6_umaxtries: 3 net.inet6.icmp6.nd6_mmaxtries: 3 net.inet6.icmp6.nd6_useloopback: 1 net.inet6.icmp6.nodeinfo: 3 net.inet6.icmp6.errppslimit: 100 net.inet6.icmp6.nd6_maxnudhint: 0 net.inet6.icmp6.nd6_debug: 0 net.inet6.icmp6.nd6_maxqueuelen: 1 net.inet6.icmp6.nd6_onlink_ns_rfc4861: 0 net.inet6.mld.use_allow: 1 net.inet6.mld.v1enable: 1 net.inet6.mld.gsrdelay: 10 net.bpf.zerocopy_enable: 0 net.bpf.maxinsns: 512 net.bpf.maxbufsize: 524288 net.bpf.bufsize: 4096 net.ifdescr_maxlen: 1024 net.isr.numthreads: 1 net.isr.maxprot: 16 net.isr.defaultqlimit: 256 net.isr.maxqlimit: 10240 net.isr.bindthreads: 0 net.isr.maxthreads: 1 net.isr.direct: 0 net.isr.direct_force: 0 net.isr.dispatch: direct net.raw.recvspace: 8192 net.raw.sendspace: 8192 net.my_fibnum: 0 net.add_addr_allfibs: 1 net.fibs: 1 net.route.netisr_maxqlen: 256 net.wlan.cac_timeout: 60 net.wlan.nol_timeout: 1800 net.wlan.debug: 0 net.wlan.addba_maxtries: 3 net.wlan.addba_backoff: 10000 net.wlan.addba_timeout: 250 net.wlan.recv_bar: 1 net.wlan.ampdu_age: 500 net.wlan.hwmp.inact: 5000 net.wlan.hwmp.rannint: 1000 net.wlan.hwmp.rootint: 2000 net.wlan.hwmp.roottimeout: 5000 net.wlan.hwmp.pathlifetime: 5000 net.wlan.hwmp.replyforward: 1 net.wlan.hwmp.targetonly: 0 net.wlan.mesh.maxretries: 2 net.wlan.mesh.confirmtimeout: 40 net.wlan.mesh.holdingtimeout: 40 net.wlan.mesh.retrytimeout: 40 debug.acpi.suspend_bounce: 0 debug.acpi.reset_clock: 1 debug.acpi.interpreter_slack: 1 debug.acpi.enable_debug_objects: 0 debug.acpi.acpi_ca_version: 20110527 debug.acpi.ec.timeout: 750 debug.acpi.ec.polled: 0 debug.acpi.ec.burst: 0 debug.acpi.batt.batt_sleep_ms: 0 debug.acpi.resume_beep: 0 debug.firewire_debug: 0 debug.fwmem_debug: 0 debug.if_fwe_debug: 0 debug.if_fwip_debug: 0 debug.ipw: 0 debug.iwi: 0 debug.mddebug: 0 debug.wpi: 0 debug.elf64_legacy_coredump: 0 debug.bootverbose: 0 debug.boothowto: 0 debug.cpufreq.verbose: 0 debug.cpufreq.lowest: 0 debug.fail_point.sysctl_running: off debug.fail_point.buf_pressure: off debug.fail_point.nlm_deny_grant: off debug.adaptive_machine_arch: 1 debug.sizeof.cdev_priv: 376 debug.sizeof.cdev: 288 debug.sizeof.g_bioq: 56 debug.sizeof.g_consumer: 96 debug.sizeof.g_provider: 136 debug.sizeof.g_geom: 160 debug.sizeof.g_class: 160 debug.sizeof.kinfo_proc: 1088 debug.sizeof.buf: 608 debug.sizeof.bio: 232 debug.sizeof.proc: 1160 debug.sizeof.vnode: 480 debug.sizeof.devstat: 288 debug.sizeof.namecache: 72 debug.osd: 0 debug.trace_on_panic: 1 debug.debugger_on_panic: 1 debug.ncores: 5 debug.to_avg_mpcalls: 512 debug.to_avg_lockcalls: 2 debug.to_avg_gcalls: 261 debug.to_avg_depth: 1235 debug.umtx.umtx_pi_allocated: 0 debug.clocktime: 0 debug.kdb.alt_break_to_debugger: 0 debug.kdb.break_to_debugger: 0 debug.kdb.trap_code: 0 debug.kdb.trap: 0 debug.kdb.panic: 0 debug.kdb.enter: 0 debug.kdb.current: debug.rman_debug: 0 debug.disablefullpath: 0 debug.disablecwd: 0 debug.vfscache: 1 debug.numcachehv: 40 debug.numcache: 439 debug.numneg: 27 debug.nchash: 262143 debug.vnlru_nowhere: 0 debug.rush_requests: 0 debug.if_tun_debug: 0 debug.nlm_debug: 0 debug.fsckcmds: 0 debug.collectsnapstats: 0 debug.snapdebug: 0 debug.dopersistence: 0 debug.softdep.cleanup_failures: 0 debug.softdep.cleanup_retries: 0 debug.softdep.cleanup_high_delay: 0 debug.softdep.cleanup_inorequests: 0 debug.softdep.cleanup_blkrequests: 0 debug.softdep.jwait_newblk: 0 debug.softdep.jwait_inode: 0 debug.softdep.jwait_freeblks: 0 debug.softdep.jwait_filepage: 0 debug.softdep.journal_wait: 0 debug.softdep.journal_min: 0 debug.softdep.journal_low: 0 debug.softdep.jnewblk_rollback: 0 debug.softdep.jaddref_rollback: 0 debug.softdep.dir_entry: 0 debug.softdep.direct_blk_ptrs: 0 debug.softdep.inode_bitmap: 0 debug.softdep.indir_blk_ptrs: 0 debug.softdep.sync_limit_hit: 0 debug.softdep.ino_limit_hit: 0 debug.softdep.blk_limit_hit: 0 debug.softdep.ino_limit_push: 0 debug.softdep.blk_limit_push: 0 debug.softdep.worklist_push: 0 debug.softdep.maxindirdeps: 50 debug.softdep.tickdelay: 2 debug.softdep.max_softdeps: 819688 debug.softdep.write.jfsync: 0 debug.softdep.write.jtrunc: 0 debug.softdep.write.sbdep: 0 debug.softdep.write.jsegdep: 0 debug.softdep.write.jseg: 0 debug.softdep.write.jfreefrag: 0 debug.softdep.write.jfreeblk: 0 debug.softdep.write.jnewblk: 0 debug.softdep.write.jmvref: 0 debug.softdep.write.jremref: 0 debug.softdep.write.jaddref: 0 debug.softdep.write.freedep: 0 debug.softdep.write.freework: 0 debug.softdep.write.newdirblk: 0 debug.softdep.write.dirrem: 0 debug.softdep.write.mkdir: 0 debug.softdep.write.diradd: 0 debug.softdep.write.freefile: 0 debug.softdep.write.freeblks: 0 debug.softdep.write.freefrag: 0 debug.softdep.write.allocindir: 0 debug.softdep.write.indirdep: 0 debug.softdep.write.allocdirect: 0 debug.softdep.write.newblk: 0 debug.softdep.write.bmsafemap: 0 debug.softdep.write.inodedep: 0 debug.softdep.write.pagedep: 0 debug.softdep.current.jfsync: 0 debug.softdep.current.jtrunc: 0 debug.softdep.current.sbdep: 0 debug.softdep.current.jsegdep: 0 debug.softdep.current.jseg: 0 debug.softdep.current.jfreefrag: 0 debug.softdep.current.jfreeblk: 0 debug.softdep.current.jnewblk: 0 debug.softdep.current.jmvref: 0 debug.softdep.current.jremref: 0 debug.softdep.current.jaddref: 0 debug.softdep.current.freedep: 0 debug.softdep.current.freework: 0 debug.softdep.current.newdirblk: 0 debug.softdep.current.dirrem: 0 debug.softdep.current.mkdir: 0 debug.softdep.current.diradd: 0 debug.softdep.current.freefile: 0 debug.softdep.current.freeblks: 0 debug.softdep.current.freefrag: 0 debug.softdep.current.allocindir: 0 debug.softdep.current.indirdep: 0 debug.softdep.current.allocdirect: 0 debug.softdep.current.newblk: 0 debug.softdep.current.bmsafemap: 0 debug.softdep.current.inodedep: 0 debug.softdep.current.pagedep: 0 debug.softdep.total.jfsync: 0 debug.softdep.total.jtrunc: 0 debug.softdep.total.sbdep: 0 debug.softdep.total.jsegdep: 0 debug.softdep.total.jseg: 0 debug.softdep.total.jfreefrag: 0 debug.softdep.total.jfreeblk: 0 debug.softdep.total.jnewblk: 0 debug.softdep.total.jmvref: 0 debug.softdep.total.jremref: 0 debug.softdep.total.jaddref: 0 debug.softdep.total.freedep: 0 debug.softdep.total.freework: 0 debug.softdep.total.newdirblk: 0 debug.softdep.total.dirrem: 0 debug.softdep.total.mkdir: 0 debug.softdep.total.diradd: 0 debug.softdep.total.freefile: 0 debug.softdep.total.freeblks: 0 debug.softdep.total.freefrag: 0 debug.softdep.total.allocindir: 0 debug.softdep.total.indirdep: 0 debug.softdep.total.allocdirect: 0 debug.softdep.total.newblk: 0 debug.softdep.total.bmsafemap: 0 debug.softdep.total.inodedep: 0 debug.softdep.total.pagedep: 0 debug.dobkgrdwrite: 1 debug.bigcgs: 0 debug.dircheck: 0 debug.psm.pkterrthresh: 2 debug.psm.usecs: 500000 debug.psm.secs: 0 debug.psm.errusecs: 0 debug.psm.errsecs: 2 debug.psm.hz: 20 debug.psm.loglevel: 0 debug.fdc.settle: 0 debug.fdc.spec2: 16 debug.fdc.spec1: 175 debug.fdc.retries: 10 debug.fdc.debugflags: 0 debug.fdc.fifo: 8 debug.elf32_legacy_coredump: 0 debug.x86bios.int: 0 debug.x86bios.call: 0 debug.hwpstate_verbose: 0 debug.minidump: 1 hw.machine: amd64 hw.model: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz hw.ncpu: 4 hw.byteorder: 1234 hw.physmem: 8477958144 hw.usermem: 8332070912 hw.pagesize: 4096 hw.floatingpoint: 1 hw.machine_arch: amd64 hw.realmem: 9661579264 hw.amr.force_sg32: 0 hw.an.an_cache_iponly: 1 hw.an.an_cache_mcastonly: 0 hw.an.an_cache_mode: dbm hw.an.an_dump: off hw.ata.setmax: 0 hw.ata.wc: 1 hw.ata.atapi_dma: 1 hw.ata.ata_dma_check_80pin: 1 hw.ata.ata_dma: 1 hw.ath.bstuck: 4 hw.ath.txbuf: 200 hw.ath.rxbuf: 40 hw.ath.anical: 100 hw.ath.resetcal: 1200 hw.ath.shortcal: 100 hw.ath.longcal: 30 hw.bce.rx_ticks: 18 hw.bce.rx_ticks_int: 18 hw.bce.rx_quick_cons_trip: 6 hw.bce.rx_quick_cons_trip_int: 6 hw.bce.tx_ticks: 80 hw.bce.tx_ticks_int: 80 hw.bce.tx_quick_cons_trip: 20 hw.bce.tx_quick_cons_trip_int: 20 hw.bce.loose_rx_mtu: 0 hw.bce.hdr_split: 1 hw.bce.tx_pages: 2 hw.bce.rx_pages: 2 hw.bce.msi_enable: 1 hw.bce.tso_enable: 1 hw.bce.verbose: 1 hw.bge.allow_asf: 1 hw.bxe.mrrs: 4294967295 hw.bxe.tx_ticks: 50 hw.bxe.rx_ticks: 25 hw.bxe.multi_mode: 1 hw.bxe.queue_count: 0 hw.bxe.int_mode: 2 hw.bxe.tso_enable: 1 hw.bxe.dcc_enable: 0 hw.cardbus.cis_debug: 0 hw.cardbus.debug: 0 hw.cs.recv_delay: 570 hw.cs.ignore_checksum_failure: 0 hw.em.eee_setting: 0 hw.em.fc_setting: 3 hw.em.rx_process_limit: 100 hw.em.enable_msix: 1 hw.em.sbp: 0 hw.em.smart_pwr_down: 0 hw.em.txd: 1024 hw.em.rxd: 1024 hw.em.rx_abs_int_delay: 66 hw.em.tx_abs_int_delay: 66 hw.em.rx_int_delay: 0 hw.em.tx_int_delay: 66 hw.igb.rx_process_limit: 100 hw.igb.num_queues: 0 hw.igb.header_split: 0 hw.igb.max_interrupt_rate: 8000 hw.igb.enable_msix: 1 hw.igb.enable_aim: 1 hw.igb.txd: 1024 hw.igb.rxd: 1024 hw.firewire.hold_count: 0 hw.firewire.try_bmr: 1 hw.firewire.fwmem.speed: 2 hw.firewire.fwmem.eui64_lo: 0 hw.firewire.fwmem.eui64_hi: 0 hw.firewire.phydma_enable: 1 hw.firewire.nocyclemaster: 0 hw.firewire.fwe.rx_queue_len: 128 hw.firewire.fwe.tx_speed: 2 hw.firewire.fwe.stream_ch: 1 hw.firewire.fwip.rx_queue_len: 128 hw.malo.txbuf: 256 hw.malo.rxquota: 256 hw.malo.rxbuf: 256 hw.malo.txcoalesce: 8 hw.malo.pci.msi_disable: 0 hw.mfi.max_cmds: 128 hw.mfi.event_class: 0 hw.mfi.event_locale: 65535 hw.mps.disable_msi: 0 hw.mps.disable_msix: 0 hw.mwl.rxdmalow: 3 hw.mwl.rxquota: 640 hw.mwl.txcoalesce: 8 hw.mwl.txbuf: 256 hw.mwl.rxbuf: 640 hw.mwl.rxdesc: 256 hw.pccard.cis_debug: 0 hw.pccard.debug: 0 hw.cbb.debug: 0 hw.cbb.start_32_io: 4096 hw.cbb.start_16_io: 256 hw.cbb.start_memory: 2281701376 hw.pcic.pd6722_vsense: 1 hw.pcic.intr_mask: 57016 hw.pci.usb_early_takeover: 1 hw.pci.honor_msi_blacklist: 1 hw.pci.enable_msix: 1 hw.pci.enable_msi: 1 hw.pci.do_power_suspend: 1 hw.pci.do_power_resume: 1 hw.pci.do_power_nodriver: 0 hw.pci.enable_io_modes: 1 hw.pci.default_vgapci_unit: -1 hw.pci.mcfg: 1 hw.pci.host_mem_start: 2147483648 hw.snd.vpc_reset: 0 hw.snd.vpc_0db: 45 hw.snd.vpc_autoreset: 1 hw.snd.latency_profile: 1 hw.snd.latency: 5 hw.snd.report_soft_matrix: 1 hw.snd.report_soft_formats: 1 hw.snd.compat_linux_mmap: 0 hw.snd.feeder_eq_exact_rate: 0 hw.snd.feeder_eq_presets: PEQ:16000,0.2500,62,0.2500:-9,9,1.0:44100,48000,88200,96000,176400,192000 hw.snd.feeder_rate_quality: 1 hw.snd.feeder_rate_round: 25 hw.snd.feeder_rate_max: 2016000 hw.snd.feeder_rate_min: 1 hw.snd.feeder_rate_polyphase_max: 183040 hw.snd.feeder_rate_presets: 100:8:0.85 100:36:0.92 100:164:0.97 hw.snd.vpc_mixer_bypass: 1 hw.snd.verbose: 0 hw.snd.maxautovchans: 16 hw.snd.default_unit: 0 hw.snd.version: 2009061500/amd64 hw.snd.default_auto: 1 hw.midi.instroff: 0 hw.midi.dumpraw: 0 hw.midi.debug: 0 hw.midi.stat.verbose: 0 hw.midi.seq.debug: 0 hw.syscons.sc_no_suspend_vtswitch: 0 hw.syscons.kbd_debug: 1 hw.syscons.kbd_reboot: 1 hw.syscons.bell: 1 hw.syscons.saver.keybonly: 1 hw.usb.uaudio.default_channels: 0 hw.usb.uaudio.default_bits: 32 hw.usb.uaudio.default_rate: 0 hw.usb.uaudio.debug: 0 hw.usb.ehci.lostintrbug: 0 hw.usb.ehci.iaadbug: 0 hw.usb.ehci.no_hs: 0 hw.usb.ehci.debug: 0 hw.usb.ohci.debug: 0 hw.usb.uhci.loop: 0 hw.usb.uhci.debug: 0 hw.usb.xhci.debug: 0 hw.usb.no_boot_wait: 0 hw.usb.ctrl.debug: 0 hw.usb.umass.debug: 0 hw.usb.urio.debug: 0 hw.usb.debug: 0 hw.usb.dev.debug: 0 hw.usb.usb_lang_mask: 255 hw.usb.usb_lang_id: 9 hw.usb.template: 0 hw.usb.ugen.debug: 0 hw.usb.power_timeout: 30 hw.usb.uhub.debug: 0 hw.usb.no_pf: 0 hw.usb.proc.debug: 0 hw.usb.pr_recovery_delay: 250 hw.usb.pr_poll_delay: 50 hw.usb.no_cs_fail: 0 hw.usb.aue.debug: 0 hw.usb.axe.debug: 0 hw.usb.cdce.interval: 0 hw.usb.cdce.debug: 0 hw.usb.cue.debug: 0 hw.usb.kue.debug: 0 hw.usb.rue.debug: 0 hw.usb.udav.debug: 0 hw.usb.rum.debug: 0 hw.usb.run.debug: 0 hw.usb.uath.regdomain: 0 hw.usb.uath.countrycode: 0 hw.usb.ural.debug: 0 hw.usb.urtw.preamble_mode: 2 hw.usb.zyd.debug: 0 hw.usb.u3g.debug: 0 hw.usb.ubsa.debug: 0 hw.usb.uftdi.debug: 0 hw.usb.ulpt.debug: 0 hw.usb.uplcom.debug: 0 hw.usb.uslcom.debug: 0 hw.usb.uvisor.debug: 0 hw.usb.uvscom.debug: 0 hw.usb.ucom.cons_baud: 9600 hw.usb.ucom.cons_subunit: 0 hw.usb.ucom.cons_unit: -1 hw.usb.ucom.debug: 0 hw.usb.uhid.debug: 0 hw.usb.ukbd.no_leds: 0 hw.usb.ukbd.debug: 0 hw.usb.ums.debug: 0 hw.wi.debug: 0 hw.wi.txerate: 0 hw.xe.debug: 0 hw.intr_storm_threshold: 1000 hw.pagesizes: 4096 2097152 0 hw.availpages: 2069814 hw.bus.devctl_queue: 1000 hw.bus.devctl_disable: 0 hw.clockrate: 2394 hw.via_feature_xcrypt: 0 hw.via_feature_rng: 0 hw.instruction_sse: 1 hw.psm.tap_timeout: 125000 hw.psm.tap_threshold: 25 hw.psm.tap_enabled: -1 hw.kbd.keymap_restrict_change: 0 hw.busdma.total_bpages: 14098 hw.busdma.zone0.total_bpages: 8194 hw.busdma.zone0.free_bpages: 8194 hw.busdma.zone0.reserved_bpages: 0 hw.busdma.zone0.active_bpages: 0 hw.busdma.zone0.total_bounced: 0 hw.busdma.zone0.total_deferred: 0 hw.busdma.zone0.lowaddr: 0xfffffffffffffff hw.busdma.zone0.alignment: 4096 hw.busdma.zone1.total_bpages: 5904 hw.busdma.zone1.free_bpages: 5904 hw.busdma.zone1.reserved_bpages: 0 hw.busdma.zone1.active_bpages: 0 hw.busdma.zone1.total_bounced: 282 hw.busdma.zone1.total_deferred: 0 hw.busdma.zone1.lowaddr: 0xffffffff hw.busdma.zone1.alignment: 4096 hw.apic.enable_extint: 0 hw.mca.erratum383: 0 hw.mca.amd10h_L1TP: 1 hw.mca.enabled: 1 hw.mca.count: 0 hw.mca.interval: 3600 hw.mca.force_scan: 0 hw.mca.cmc_throttle: 60 hw.acpi.supported_sleep_state: S1 S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 0 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 1 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.acline: 0 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: -273.2C hw.acpi.thermal.tz0.active: -2 hw.acpi.thermal.tz0.passive_cooling: 0 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 90.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 120.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz0._TC1: 0 hw.acpi.thermal.tz0._TC2: 50 hw.acpi.thermal.tz0._TSP: 0 hw.acpi.thermal.tz1.temperature: 27.0C hw.acpi.thermal.tz1.active: -1 hw.acpi.thermal.tz1.passive_cooling: 0 hw.acpi.thermal.tz1.thermal_flags: 0 hw.acpi.thermal.tz1._PSV: -1 hw.acpi.thermal.tz1._HOT: -1 hw.acpi.thermal.tz1._CRT: 120.0C hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz1._TC1: -1 hw.acpi.thermal.tz1._TC2: -1 hw.acpi.thermal.tz1._TSP: -1 hw.acpi.battery.life: 96 hw.acpi.battery.time: 180 hw.acpi.battery.state: 1 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 machdep.acpi_timer_freq: 3579545 machdep.enable_panic_key: 0 machdep.rtc_save_period: 1800 machdep.wall_cmos_clock: 0 machdep.adjkerntz: 0 machdep.disable_rtc_set: 0 machdep.disable_mtrrs: 0 machdep.idle: acpi machdep.idle_available: spin, mwait, hlt, acpi machdep.idle_mwait: 1 machdep.max_ldt_segment: 1024 machdep.prot_fault_translation: 0 machdep.panic_on_nmi: 1 machdep.kdb_on_nmi: 1 machdep.acpi_root: 983264 machdep.i8254_freq: 1193182 machdep.tsc_freq: 2394614420 machdep.disable_tsc_calibration: 0 machdep.disable_tsc: 0 user.cs_path: /usr/bin:/bin:/usr/sbin:/sbin user.bc_base_max: 99 user.bc_dim_max: 2048 user.bc_scale_max: 99 user.bc_string_max: 1000 user.coll_weights_max: 0 user.expr_nest_max: 32 user.line_max: 2048 user.re_dup_max: 255 user.posix2_version: 199212 user.posix2_c_bind: 0 user.posix2_c_dev: 0 user.posix2_char_term: 0 user.posix2_fort_dev: 0 user.posix2_fort_run: 0 user.posix2_localedef: 0 user.posix2_sw_dev: 0 user.posix2_upe: 0 user.stream_max: 20 user.tzname_max: 255 p1003_1b.asynchronous_io: 0 p1003_1b.mapped_files: 200112 p1003_1b.memlock: 0 p1003_1b.memlock_range: 0 p1003_1b.memory_protection: 0 p1003_1b.message_passing: 0 p1003_1b.prioritized_io: 0 p1003_1b.priority_scheduling: 200112 p1003_1b.realtime_signals: 200112 p1003_1b.semaphores: 0 p1003_1b.fsync: 200112 p1003_1b.shared_memory_objects: 200112 p1003_1b.synchronized_io: 0 p1003_1b.timers: 200112 p1003_1b.aio_listio_max: -1 p1003_1b.aio_max: -1 p1003_1b.aio_prio_delta_max: -1 p1003_1b.delaytimer_max: 2147483647 p1003_1b.mq_open_max: 0 p1003_1b.pagesize: 4096 p1003_1b.rtsig_max: 62 p1003_1b.sem_nsems_max: 0 p1003_1b.sem_value_max: 0 p1003_1b.sigqueue_max: 128 p1003_1b.timer_max: 32 security.jail.param.allow.socket_af: 0 security.jail.param.allow.quotas: 0 security.jail.param.allow.mount: 0 security.jail.param.allow.chflags: 0 security.jail.param.allow.raw_sockets: 0 security.jail.param.allow.sysvipc: 0 security.jail.param.allow.set_hostname: 0 security.jail.param.ip6.saddrsel: 0 security.jail.param.ip6.: 0 security.jail.param.ip4.saddrsel: 0 security.jail.param.ip4.: 0 security.jail.param.cpuset.id: 0 security.jail.param.host.hostid: 0 security.jail.param.host.hostuuid: 64 security.jail.param.host.domainname: 256 security.jail.param.host.hostname: 256 security.jail.param.host.: 0 security.jail.param.children.max: 0 security.jail.param.children.cur: 0 security.jail.param.dying: 0 security.jail.param.persist: 0 security.jail.param.enforce_statfs: 0 security.jail.param.securelevel: 0 security.jail.param.path: 1024 security.jail.param.name: 256 security.jail.param.parent: 0 security.jail.param.jid: 0 security.jail.enforce_statfs: 2 security.jail.mount_allowed: 0 security.jail.chflags_allowed: 0 security.jail.allow_raw_sockets: 0 security.jail.sysvipc_allowed: 0 security.jail.socket_unixiproute_only: 1 security.jail.set_hostname_allowed: 1 security.jail.jail_max_af_ips: 255 security.jail.jailed: 0 security.bsd.map_at_zero: 0 security.bsd.suser_enabled: 1 security.bsd.unprivileged_proc_debug: 1 security.bsd.conservative_signals: 1 security.bsd.see_other_gids: 1 security.bsd.see_other_uids: 1 security.bsd.unprivileged_read_msgbuf: 1 security.bsd.hardlink_check_gid: 0 security.bsd.hardlink_check_uid: 0 security.bsd.unprivileged_get_quota: 0 security.bsd.stack_guard_page: 0 security.mac.labeled: 0 security.mac.max_slots: 4 security.mac.version: 4 security.mac.mmap_revocation_via_cow: 0 security.mac.mmap_revocation: 1 compat.ia32.maxvmem: 0 compat.ia32.maxssiz: 67108864 compat.ia32.maxdsiz: 536870912 dev.nexus.0.%driver: nexus dev.nexus.0.%parent: root0 dev.ram.0.%desc: System RAM dev.ram.0.%driver: ram dev.ram.0.%parent: nexus0 dev.acpi.0.%desc: LENOVO TP-8H dev.acpi.0.%driver: acpi dev.acpi.0.%parent: nexus0 dev.acpi_sysresource.0.%desc: System Resource dev.acpi_sysresource.0.%driver: acpi_sysresource dev.acpi_sysresource.0.%location: handle=\_SB_.PCI0.LPCB.H_EC.WDT0 dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C02 _UID=3 dev.acpi_sysresource.0.%parent: acpi0 dev.acpi_sysresource.1.%desc: System Resource dev.acpi_sysresource.1.%driver: acpi_sysresource dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.LPCB.LDRC dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=2 dev.acpi_sysresource.1.%parent: acpi0 dev.acpi_sysresource.2.%desc: System Resource dev.acpi_sysresource.2.%driver: acpi_sysresource dev.acpi_sysresource.2.%location: handle=\_SB_.PCI0.LPCB.CWDT dev.acpi_sysresource.2.%pnpinfo: _HID=INT3F0D _UID=0 dev.acpi_sysresource.2.%parent: acpi0 dev.acpi_sysresource.3.%desc: System Resource dev.acpi_sysresource.3.%driver: acpi_sysresource dev.acpi_sysresource.3.%location: handle=\_SB_.PCI0.PDRC dev.acpi_sysresource.3.%pnpinfo: _HID=PNP0C02 _UID=1 dev.acpi_sysresource.3.%parent: acpi0 dev.acpi_sysresource.4.%desc: System Resource dev.acpi_sysresource.4.%driver: acpi_sysresource dev.acpi_sysresource.4.%location: handle=\_SB_.MEM2 dev.acpi_sysresource.4.%pnpinfo: _HID=PNP0C01 _UID=2 dev.acpi_sysresource.4.%parent: acpi0 dev.acpi_sysresource.5.%desc: System Resource dev.acpi_sysresource.5.%driver: acpi_sysresource dev.acpi_sysresource.5.%location: handle=\_SB_.PTID dev.acpi_sysresource.5.%pnpinfo: _HID=INT340E _UID=0 dev.acpi_sysresource.5.%parent: acpi0 dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz dev.acpi_timer.0.%driver: acpi_timer dev.acpi_timer.0.%location: unknown dev.acpi_timer.0.%pnpinfo: unknown dev.acpi_timer.0.%parent: acpi0 dev.cpu.0.%desc: ACPI CPU dev.cpu.0.%driver: cpu dev.cpu.0.%location: handle=\_PR_.CPU0 dev.cpu.0.%pnpinfo: _HID=none _UID=0 dev.cpu.0.%parent: acpi0 dev.cpu.0.freq: 2401 dev.cpu.0.freq_levels: 2401/35000 2100/30625 2000/27740 1800/24490 1600/21045 1400/18055 1225/15798 1200/15194 1050/13294 1000/12156 875/10636 800/9543 700/8350 600/7157 500/5964 400/4771 300/3578 200/2385 100/1192 dev.cpu.0.cx_supported: C1/1 C2/80 C3/109 dev.cpu.0.cx_lowest: C1 dev.cpu.0.cx_usage: 100.00% 0.00% 0.00% last 3300us dev.cpu.1.%desc: ACPI CPU dev.cpu.1.%driver: cpu dev.cpu.1.%location: handle=\_PR_.CPU1 dev.cpu.1.%pnpinfo: _HID=none _UID=0 dev.cpu.1.%parent: acpi0 dev.cpu.1.cx_supported: C1/1 C2/80 C3/109 dev.cpu.1.cx_lowest: C1 dev.cpu.1.cx_usage: 100.00% 0.00% 0.00% last 13524us dev.cpu.2.%desc: ACPI CPU dev.cpu.2.%driver: cpu dev.cpu.2.%location: handle=\_PR_.CPU2 dev.cpu.2.%pnpinfo: _HID=none _UID=0 dev.cpu.2.%parent: acpi0 dev.cpu.2.cx_supported: C1/1 C2/80 C3/109 dev.cpu.2.cx_lowest: C1 dev.cpu.2.cx_usage: 100.00% 0.00% 0.00% last 521us dev.cpu.3.%desc: ACPI CPU dev.cpu.3.%driver: cpu dev.cpu.3.%location: handle=\_PR_.CPU3 dev.cpu.3.%pnpinfo: _HID=none _UID=0 dev.cpu.3.%parent: acpi0 dev.cpu.3.cx_supported: C1/1 C2/80 C3/109 dev.cpu.3.cx_lowest: C1 dev.cpu.3.cx_usage: 100.00% 0.00% 0.00% last 16744us dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x17 dev.acpi_ec.0.%driver: acpi_ec dev.acpi_ec.0.%location: handle=\_SB_.PCI0.LPCB.H_EC dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=1 dev.acpi_ec.0.%parent: acpi0 dev.pci_link.0.%desc: ACPI PCI Link LNKA dev.pci_link.0.%driver: pci_link dev.pci_link.0.%location: handle=\_SB_.LNKA dev.pci_link.0.%pnpinfo: _HID=PNP0C0F _UID=1 dev.pci_link.0.%parent: acpi0 dev.pci_link.1.%desc: ACPI PCI Link LNKB dev.pci_link.1.%driver: pci_link dev.pci_link.1.%location: handle=\_SB_.LNKB dev.pci_link.1.%pnpinfo: _HID=PNP0C0F _UID=2 dev.pci_link.1.%parent: acpi0 dev.pci_link.2.%desc: ACPI PCI Link LNKC dev.pci_link.2.%driver: pci_link dev.pci_link.2.%location: handle=\_SB_.LNKC dev.pci_link.2.%pnpinfo: _HID=PNP0C0F _UID=3 dev.pci_link.2.%parent: acpi0 dev.pci_link.3.%desc: ACPI PCI Link LNKD dev.pci_link.3.%driver: pci_link dev.pci_link.3.%location: handle=\_SB_.LNKD dev.pci_link.3.%pnpinfo: _HID=PNP0C0F _UID=4 dev.pci_link.3.%parent: acpi0 dev.pci_link.4.%desc: ACPI PCI Link LNKE dev.pci_link.4.%driver: pci_link dev.pci_link.4.%location: handle=\_SB_.LNKE dev.pci_link.4.%pnpinfo: _HID=PNP0C0F _UID=5 dev.pci_link.4.%parent: acpi0 dev.pci_link.5.%desc: ACPI PCI Link LNKF dev.pci_link.5.%driver: pci_link dev.pci_link.5.%location: handle=\_SB_.LNKF dev.pci_link.5.%pnpinfo: _HID=PNP0C0F _UID=6 dev.pci_link.5.%parent: acpi0 dev.pci_link.6.%desc: ACPI PCI Link LNKG dev.pci_link.6.%driver: pci_link dev.pci_link.6.%location: handle=\_SB_.LNKG dev.pci_link.6.%pnpinfo: _HID=PNP0C0F _UID=7 dev.pci_link.6.%parent: acpi0 dev.pci_link.7.%desc: ACPI PCI Link LNKH dev.pci_link.7.%driver: pci_link dev.pci_link.7.%location: handle=\_SB_.LNKH dev.pci_link.7.%pnpinfo: _HID=PNP0C0F _UID=8 dev.pci_link.7.%parent: acpi0 dev.pcib.0.%desc: ACPI Host-PCI bridge dev.pcib.0.%driver: pcib dev.pcib.0.%location: handle=\_SB_.PCI0 dev.pcib.0.%pnpinfo: _HID=PNP0A08 _UID=0 dev.pcib.0.%parent: acpi0 dev.pcib.1.%desc: ACPI PCI-PCI bridge dev.pcib.1.%driver: pcib dev.pcib.1.%location: slot=28 function=0 handle=\_SB_.PCI0.RP01 dev.pcib.1.%pnpinfo: vendor=0x8086 device=0x1c10 subvendor=0x17aa subdevice=0x21e2 class=0x060400 dev.pcib.1.%parent: pci0 dev.pcib.1.domain: 0 dev.pcib.1.pribus: 0 dev.pcib.1.secbus: 1 dev.pcib.1.subbus: 1 dev.pcib.1.wake: 0 dev.pcib.2.%desc: ACPI PCI-PCI bridge dev.pcib.2.%driver: pcib dev.pcib.2.%location: slot=28 function=1 handle=\_SB_.PCI0.RP02 dev.pcib.2.%pnpinfo: vendor=0x8086 device=0x1c12 subvendor=0x17aa subdevice=0x21e2 class=0x060400 dev.pcib.2.%parent: pci0 dev.pcib.2.domain: 0 dev.pcib.2.pribus: 0 dev.pcib.2.secbus: 2 dev.pcib.2.subbus: 2 dev.pcib.2.wake: 0 dev.pcib.3.%desc: ACPI PCI-PCI bridge dev.pcib.3.%driver: pcib dev.pcib.3.%location: slot=28 function=2 handle=\_SB_.PCI0.RP03 dev.pcib.3.%pnpinfo: vendor=0x8086 device=0x1c14 subvendor=0x17aa subdevice=0x21e2 class=0x060400 dev.pcib.3.%parent: pci0 dev.pcib.3.domain: 0 dev.pcib.3.pribus: 0 dev.pcib.3.secbus: 3 dev.pcib.3.subbus: 7 dev.pcib.3.wake: 0 dev.pcib.4.%desc: ACPI PCI-PCI bridge dev.pcib.4.%driver: pcib dev.pcib.4.%location: slot=28 function=3 handle=\_SB_.PCI0.RP04 dev.pcib.4.%pnpinfo: vendor=0x8086 device=0x1c16 subvendor=0x17aa subdevice=0x21e2 class=0x060400 dev.pcib.4.%parent: pci0 dev.pcib.4.domain: 0 dev.pcib.4.pribus: 0 dev.pcib.4.secbus: 8 dev.pcib.4.subbus: 8 dev.pcib.4.wake: 0 dev.pcib.5.%desc: ACPI PCI-PCI bridge dev.pcib.5.%driver: pcib dev.pcib.5.%location: slot=28 function=7 handle=\_SB_.PCI0.RP08 dev.pcib.5.%pnpinfo: vendor=0x8086 device=0x1c1e subvendor=0x17aa subdevice=0x21e2 class=0x060400 dev.pcib.5.%parent: pci0 dev.pcib.5.domain: 0 dev.pcib.5.pribus: 0 dev.pcib.5.secbus: 9 dev.pcib.5.subbus: 13 dev.pcib.5.wake: 0 dev.pci.0.%desc: ACPI PCI bus dev.pci.0.%driver: pci dev.pci.0.%parent: pcib0 dev.pci.1.%desc: ACPI PCI bus dev.pci.1.%driver: pci dev.pci.1.%parent: pcib1 dev.pci.1.wake: 0 dev.pci.2.%desc: ACPI PCI bus dev.pci.2.%driver: pci dev.pci.2.%parent: pcib2 dev.pci.2.wake: 0 dev.pci.3.%desc: ACPI PCI bus dev.pci.3.%driver: pci dev.pci.3.%parent: pcib3 dev.pci.3.wake: 0 dev.pci.8.%desc: ACPI PCI bus dev.pci.8.%driver: pci dev.pci.8.%parent: pcib4 dev.pci.8.wake: 0 dev.pci.9.%desc: ACPI PCI bus dev.pci.9.%driver: pci dev.pci.9.%parent: pcib5 dev.pci.9.wake: 0 dev.hostb.0.%desc: Host to PCI bridge dev.hostb.0.%driver: hostb dev.hostb.0.%location: slot=0 function=0 dev.hostb.0.%pnpinfo: vendor=0x8086 device=0x0104 subvendor=0x17aa subdevice=0x21e2 class=0x060000 dev.hostb.0.%parent: pci0 dev.vgapci.0.%desc: VGA-compatible display dev.vgapci.0.%driver: vgapci dev.vgapci.0.%location: slot=2 function=0 handle=\_SB_.PCI0.GFX0 dev.vgapci.0.%pnpinfo: vendor=0x8086 device=0x0116 subvendor=0x17aa subdevice=0x21e2 class=0x030000 dev.vgapci.0.%parent: pci0 dev.ehci.0.%desc: EHCI (generic) USB 2.0 controller dev.ehci.0.%driver: ehci dev.ehci.0.%location: slot=26 function=0 handle=\_SB_.PCI0.EHC2 dev.ehci.0.%pnpinfo: vendor=0x8086 device=0x1c2d subvendor=0x17aa subdevice=0x21e2 class=0x0c0320 dev.ehci.0.%parent: pci0 dev.ehci.0.wake: 0 dev.ehci.1.%desc: EHCI (generic) USB 2.0 controller dev.ehci.1.%driver: ehci dev.ehci.1.%location: slot=29 function=0 handle=\_SB_.PCI0.EHC1 dev.ehci.1.%pnpinfo: vendor=0x8086 device=0x1c26 subvendor=0x17aa subdevice=0x21e2 class=0x0c0320 dev.ehci.1.%parent: pci0 dev.ehci.1.wake: 0 dev.usbus.0.%desc: EHCI (generic) USB 2.0 controller dev.usbus.0.%driver: usbus dev.usbus.0.%parent: ehci0 dev.usbus.1.%desc: EHCI (generic) USB 2.0 controller dev.usbus.1.%driver: usbus dev.usbus.1.%parent: ehci1 dev.hdac.0.%desc: Intel Cougar Point High Definition Audio Controller dev.hdac.0.%driver: hdac dev.hdac.0.%location: slot=27 function=0 handle=\_SB_.PCI0.HDEF dev.hdac.0.%pnpinfo: vendor=0x8086 device=0x1c20 subvendor=0x17aa subdevice=0x21e2 class=0x040300 dev.hdac.0.%parent: pci0 dev.hdac.0.wake: 0 dev.hdac.0.polling: 0 dev.hdac.0.polling_interval: 250 dev.hdac.0.pindump: 0 dev.re.0.%desc: RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet dev.re.0.%driver: re dev.re.0.%location: slot=0 function=0 handle=\_SB_.PCI0.RP02.PXSX dev.re.0.%pnpinfo: vendor=0x10ec device=0x8168 subvendor=0x17aa subdevice=0x21e2 class=0x020000 dev.re.0.%parent: pci2 dev.re.0.stats: -1 dev.re.0.int_rx_mod: 65 dev.re.0.wake: 0 dev.miibus.0.%desc: MII bus dev.miibus.0.%driver: miibus dev.miibus.0.%parent: re0 dev.rgephy.0.%desc: RTL8169S/8110S/8211 1000BASE-T media interface dev.rgephy.0.%driver: rgephy dev.rgephy.0.%location: phyno=1 dev.rgephy.0.%pnpinfo: oui=0xe04c model=0x11 rev=0x4 dev.rgephy.0.%parent: miibus0 dev.iwn.0.%desc: Intel(R) Centrino(R) Wireless-N 1000 dev.iwn.0.%driver: iwn dev.iwn.0.%location: slot=0 function=0 handle=\_SB_.PCI0.RP04.PXSX dev.iwn.0.%pnpinfo: vendor=0x8086 device=0x0084 subvendor=0x8086 subdevice=0x1315 class=0x028000 dev.iwn.0.%parent: pci8 dev.iwn.0.debug: 0 dev.iwn.0.wake: 0 dev.isab.0.%desc: PCI-ISA bridge dev.isab.0.%driver: isab dev.isab.0.%location: slot=31 function=0 handle=\_SB_.PCI0.LPCB dev.isab.0.%pnpinfo: vendor=0x8086 device=0x1c49 subvendor=0x17aa subdevice=0x21e2 class=0x060100 dev.isab.0.%parent: pci0 dev.isa.0.%desc: ISA bus dev.isa.0.%driver: isa dev.isa.0.%parent: isab0 dev.ahci.0.%desc: Intel Cougar Point AHCI SATA controller dev.ahci.0.%driver: ahci dev.ahci.0.%location: slot=31 function=2 handle=\_SB_.PCI0.SAT0 dev.ahci.0.%pnpinfo: vendor=0x8086 device=0x1c03 subvendor=0x17aa subdevice=0x21e2 class=0x010601 dev.ahci.0.%parent: pci0 dev.ahcich.0.%desc: AHCI channel dev.ahcich.0.%driver: ahcich dev.ahcich.0.%location: channel=0 dev.ahcich.0.%parent: ahci0 dev.ahcich.1.%desc: AHCI channel dev.ahcich.1.%driver: ahcich dev.ahcich.1.%location: channel=4 dev.ahcich.1.%parent: ahci0 dev.ahcich.2.%desc: AHCI channel dev.ahcich.2.%driver: ahcich dev.ahcich.2.%location: channel=5 dev.ahcich.2.%parent: ahci0 dev.acpi_acad.0.%desc: AC Adapter dev.acpi_acad.0.%driver: acpi_acad dev.acpi_acad.0.%location: handle=\_SB_.ADP1 dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0 dev.acpi_acad.0.%parent: acpi0 dev.acpi_lid.0.%desc: Control Method Lid Switch dev.acpi_lid.0.%driver: acpi_lid dev.acpi_lid.0.%location: handle=\_SB_.LID0 dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0 dev.acpi_lid.0.%parent: acpi0 dev.acpi_lid.0.wake: 1 dev.acpi_tz.0.%desc: Thermal Zone dev.acpi_tz.0.%driver: acpi_tz dev.acpi_tz.0.%location: handle=\_TZ_.TZS0 dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0 dev.acpi_tz.0.%parent: acpi0 dev.acpi_tz.1.%desc: Thermal Zone dev.acpi_tz.1.%driver: acpi_tz dev.acpi_tz.1.%location: handle=\_TZ_.TZS1 dev.acpi_tz.1.%pnpinfo: _HID=none _UID=0 dev.acpi_tz.1.%parent: acpi0 dev.atdma.0.%desc: AT DMA controller dev.atdma.0.%driver: atdma dev.atdma.0.%location: handle=\_SB_.PCI0.LPCB.DMAC dev.atdma.0.%pnpinfo: _HID=PNP0200 _UID=0 dev.atdma.0.%parent: acpi0 dev.hpet.0.%desc: High Precision Event Timer dev.hpet.0.%driver: hpet dev.hpet.0.%location: handle=\_SB_.PCI0.LPCB.HPET dev.hpet.0.%pnpinfo: _HID=PNP0103 _UID=0 dev.hpet.0.%parent: acpi0 dev.fpupnp.0.%desc: Legacy ISA coprocessor support dev.fpupnp.0.%driver: fpupnp dev.fpupnp.0.%location: handle=\_SB_.PCI0.LPCB.MATH dev.fpupnp.0.%pnpinfo: _HID=PNP0C04 _UID=0 dev.fpupnp.0.%parent: acpi0 dev.atrtc.0.%desc: AT realtime clock dev.atrtc.0.%driver: atrtc dev.atrtc.0.%location: handle=\_SB_.PCI0.LPCB.RTC_ dev.atrtc.0.%pnpinfo: _HID=PNP0B00 _UID=0 dev.atrtc.0.%parent: acpi0 dev.attimer.0.%desc: AT timer dev.attimer.0.%driver: attimer dev.attimer.0.%location: handle=\_SB_.PCI0.LPCB.TIMR dev.attimer.0.%pnpinfo: _HID=PNP0100 _UID=0 dev.attimer.0.%parent: acpi0 dev.atkbdc.0.%desc: Keyboard controller (i8042) dev.atkbdc.0.%driver: atkbdc dev.atkbdc.0.%location: handle=\_SB_.PCI0.LPCB.KBD_ dev.atkbdc.0.%pnpinfo: _HID=PNP0303 _UID=0 dev.atkbdc.0.%parent: acpi0 dev.atkbd.0.%desc: AT Keyboard dev.atkbd.0.%driver: atkbd dev.atkbd.0.%parent: atkbdc0 dev.psmcpnp.0.%desc: PS/2 mouse port dev.psmcpnp.0.%driver: psmcpnp dev.psmcpnp.0.%location: handle=\_SB_.PCI0.LPCB.MOU_ dev.psmcpnp.0.%pnpinfo: _HID=LEN0023 _UID=0 dev.psmcpnp.0.%parent: acpi0 dev.psm.0.%desc: PS/2 Mouse dev.psm.0.%driver: psm dev.psm.0.%parent: atkbdc0 dev.battery.0.%desc: ACPI Control Method Battery dev.battery.0.%driver: battery dev.battery.0.%location: handle=\_SB_.PCI0.LPCB.H_EC.BAT0 dev.battery.0.%pnpinfo: _HID=PNP0C0A _UID=0 dev.battery.0.%parent: acpi0 dev.apic.0.%desc: APIC resources dev.apic.0.%driver: apic dev.apic.0.%parent: nexus0 dev.sc.0.%desc: System console dev.sc.0.%driver: sc dev.sc.0.%parent: isa0 dev.vga.0.%desc: Generic ISA VGA dev.vga.0.%driver: vga dev.vga.0.%parent: isa0 dev.acpi_perf.0.%driver: acpi_perf dev.acpi_perf.0.%parent: cpu0 dev.acpi_perf.1.%driver: acpi_perf dev.acpi_perf.1.%parent: cpu1 dev.acpi_perf.2.%driver: acpi_perf dev.acpi_perf.2.%parent: cpu2 dev.acpi_perf.3.%driver: acpi_perf dev.acpi_perf.3.%parent: cpu3 dev.est.0.%desc: Enhanced SpeedStep Frequency Control dev.est.0.%driver: est dev.est.0.%parent: cpu0 dev.est.0.freq_settings: 2401/35000 2400/35000 2000/27740 1800/24490 1600/21045 1400/18055 1200/15194 1000/12156 800/9543 dev.est.1.%desc: Enhanced SpeedStep Frequency Control dev.est.1.%driver: est dev.est.1.%parent: cpu1 dev.est.1.freq_settings: 2401/35000 2400/35000 2000/27740 1800/24490 1600/21045 1400/18055 1200/15194 1000/12156 800/9543 dev.est.2.%desc: Enhanced SpeedStep Frequency Control dev.est.2.%driver: est dev.est.2.%parent: cpu2 dev.est.2.freq_settings: 2401/35000 2400/35000 2000/27740 1800/24490 1600/21045 1400/18055 1200/15194 1000/12156 800/9543 dev.est.3.%desc: Enhanced SpeedStep Frequency Control dev.est.3.%driver: est dev.est.3.%parent: cpu3 dev.est.3.freq_settings: 2401/35000 2400/35000 2000/27740 1800/24490 1600/21045 1400/18055 1200/15194 1000/12156 800/9543 dev.cpufreq.0.%driver: cpufreq dev.cpufreq.0.%parent: cpu0 dev.cpufreq.1.%driver: cpufreq dev.cpufreq.1.%parent: cpu1 dev.cpufreq.2.%driver: cpufreq dev.cpufreq.2.%parent: cpu2 dev.cpufreq.3.%driver: cpufreq dev.cpufreq.3.%parent: cpu3 dev.p4tcc.0.%desc: CPU Frequency Thermal Control dev.p4tcc.0.%driver: p4tcc dev.p4tcc.0.%parent: cpu0 dev.p4tcc.0.freq_settings: 10000/-1 8750/-1 7500/-1 6250/-1 5000/-1 3750/-1 2500/-1 1250/-1 dev.p4tcc.1.%desc: CPU Frequency Thermal Control dev.p4tcc.1.%driver: p4tcc dev.p4tcc.1.%parent: cpu1 dev.p4tcc.1.freq_settings: 10000/-1 8750/-1 7500/-1 6250/-1 5000/-1 3750/-1 2500/-1 1250/-1 dev.p4tcc.2.%desc: CPU Frequency Thermal Control dev.p4tcc.2.%driver: p4tcc dev.p4tcc.2.%parent: cpu2 dev.p4tcc.2.freq_settings: 10000/-1 8750/-1 7500/-1 6250/-1 5000/-1 3750/-1 2500/-1 1250/-1 dev.p4tcc.3.%desc: CPU Frequency Thermal Control dev.p4tcc.3.%driver: p4tcc dev.p4tcc.3.%parent: cpu3 dev.p4tcc.3.freq_settings: 10000/-1 8750/-1 7500/-1 6250/-1 5000/-1 3750/-1 2500/-1 1250/-1 dev.pcm.0.%desc: HDA Conexant CX20590 PCM #0 Analog dev.pcm.0.%driver: pcm dev.pcm.0.%parent: hdac0 dev.pcm.0.play.vchans: 1 dev.pcm.0.play.vchanmode: fixed dev.pcm.0.play.vchanrate: 48000 dev.pcm.0.play.vchanformat: s16le:2.0 dev.pcm.0.rec.vchans: 1 dev.pcm.0.rec.vchanmode: fixed dev.pcm.0.rec.vchanrate: 48000 dev.pcm.0.rec.vchanformat: s16le:2.0 dev.pcm.0.buffersize: 16384 dev.pcm.0.bitperfect: 0 dev.pcm.1.%desc: HDA Conexant CX20590 PCM #1 Analog dev.pcm.1.%driver: pcm dev.pcm.1.%parent: hdac0 dev.pcm.1.play.vchans: 1 dev.pcm.1.play.vchanmode: fixed dev.pcm.1.play.vchanrate: 48000 dev.pcm.1.play.vchanformat: s16le:2.0 dev.pcm.1.rec.vchans: 1 dev.pcm.1.rec.vchanmode: fixed dev.pcm.1.rec.vchanrate: 48000 dev.pcm.1.rec.vchanformat: s16le:2.0 dev.pcm.1.buffersize: 16384 dev.pcm.1.bitperfect: 0 dev.pcm.2.%desc: HDA Intel Cougar Point HDMI PCM #0 DisplayPort dev.pcm.2.%driver: pcm dev.pcm.2.%parent: hdac0 dev.pcm.2.play.vchans: 1 dev.pcm.2.play.vchanmode: passthrough dev.pcm.2.play.vchanrate: 48000 dev.pcm.2.play.vchanformat: s16le:2.0 dev.pcm.2.buffersize: 16384 dev.pcm.2.bitperfect: 0 dev.uhub.0.%desc: Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1 dev.uhub.0.%driver: uhub dev.uhub.0.%parent: usbus0 dev.uhub.1.%desc: Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1 dev.uhub.1.%driver: uhub dev.uhub.1.%parent: usbus1 dev.uhub.2.%desc: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2 dev.uhub.2.%driver: uhub dev.uhub.2.%location: bus=1 hubaddr=1 port=0 devaddr=2 interface=0 dev.uhub.2.%pnpinfo: vendor=0x8087 product=0x0024 devclass=0x09 devsubclass=0x00 sernum="" release=0x0000 mode=host intclass=0x09 intsubclass=0x00 intprotocol=0x00 dev.uhub.2.%parent: uhub0 dev.uhub.3.%desc: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2 dev.uhub.3.%driver: uhub dev.uhub.3.%location: bus=1 hubaddr=1 port=1 devaddr=2 interface=0 dev.uhub.3.%pnpinfo: vendor=0x8087 product=0x0024 devclass=0x09 devsubclass=0x00 sernum="" release=0x0000 mode=host intclass=0x09 intsubclass=0x00 intprotocol=0x00 dev.uhub.3.%parent: uhub1 dev.umass.0.%desc: USBest Technology USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3 dev.umass.0.%driver: umass dev.umass.0.%location: bus=2 hubaddr=2 port=1 devaddr=3 interface=0 dev.umass.0.%pnpinfo: vendor=0x1307 product=0x0165 devclass=0x00 devsubclass=0x00 sernum="0000000000004D" release=0x0100 mode=host intclass=0x08 intsubclass=0x06 intprotocol=0x50 dev.umass.0.%parent: uhub3 hptmv.status: RocketRAID 18xx SATA Controller driver Version v1.16 -- M: +34 666 334 818 T: +34 915 211 157 From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 22:00:51 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5F0771065677 for ; Tue, 22 Nov 2011 22:00:51 +0000 (UTC) (envelope-from kudzu@tenebras.com) Received: from mail-ww0-f42.google.com (mail-ww0-f42.google.com [74.125.82.42]) by mx1.freebsd.org (Postfix) with ESMTP id F26C18FC20 for ; Tue, 22 Nov 2011 22:00:50 +0000 (UTC) Received: by wwe3 with SMTP id 3so7944089wwe.1 for ; Tue, 22 Nov 2011 14:00:50 -0800 (PST) MIME-Version: 1.0 Received: by 10.180.4.102 with SMTP id j6mr21194505wij.38.1321999249775; Tue, 22 Nov 2011 14:00:49 -0800 (PST) Received: by 10.180.81.193 with HTTP; Tue, 22 Nov 2011 14:00:49 -0800 (PST) In-Reply-To: <4B28ADC5-8325-442E-8F02-9AE3535D8C6D@gmail.com> References: <2973_1321996526_4ECC10EE_2973_123_1_D9B37353831173459FDAA836D3B43499D2C69D77@WADPMBXV0.waddell.com> <4B28ADC5-8325-442E-8F02-9AE3535D8C6D@gmail.com> Date: Tue, 22 Nov 2011 14:00:49 -0800 Message-ID: From: Michael Sierchio To: Kees Jan Koster Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: Gary Gatten , "freebsd-questions@freebsd.org" Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 22:00:51 -0000 On Tue, Nov 22, 2011 at 1:58 PM, Kees Jan Koster wrote= : > Thank you for your reply. Your comment about dupe IP triggered something = that I failed to mention: the interface is aliased. It has two IP addresses= . IP address a and it has an alias IP address b. I just tested binding mtr = to each of these interfaces separately to measure packet loss. Show us the ifconfig output. My guess is that the alias is incorrectly configured. From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 22:01:58 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 484D31065672 for ; Tue, 22 Nov 2011 22:01:58 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp6.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id 9D5AE8FC1F for ; Tue, 22 Nov 2011 22:01:57 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pAMM1rox081563 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO) for ; Tue, 22 Nov 2011 22:01:53 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pAMM1rox081563 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1321999313; bh=KUmFJWm1JeUeg74rKTLXx254txjQs8AH9uP7CILGSJg=; h=Message-ID:Date:From:MIME-Version:To:Subject:References: In-Reply-To:Content-Type:Cc; b=AKKWWOVNYpJrjGYixtNnX98AvFeWUZ5p7gv9b6AA0efVRgDGcU9wLetbwkaLbFsLV M74bZjU2cNw1idCd/rhCwUbMq05LqIbc4uP/LORH/k9C4H/GkMQxCgmlfk9I0CceOr ZqVeHr7IDL6AIWsOdcoJFfkzpNYrs3C4V1IH8njc= Message-ID: <4ECC1BC9.7060007@infracaninophile.co.uk> Date: Tue, 22 Nov 2011 22:01:45 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: In-Reply-To: X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig88A62592967565C69995833A" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-0.1 required=5.0 tests=BAYES_20,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 22:01:58 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig88A62592967565C69995833A Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 22/11/2011 20:33, Kees Jan Koster wrote: > I am stuck with a machine that shows serious packet loss (about 1% of > all traffic is dropped). I tried the obvious (new network cable, > different switch port, different ethernet interface on the machine), > but the problems remain. >=20 > Another machine that sits in the same rack and is hooked up to the > same switch shows no such packet loss issues. The problematic machine > is a dual Opteron with FreeBSD 8.2-STABLE from Thu Aug 11 14:05:47 > CEST 2011. >=20 > The machine is lightly loaded. A MySQL slave is running, but the > machine is not serving queries. Plus a Munin server process. >=20 > I am at a loss where to start diagnosing this. Can you advise me > where to look? Are there network buffers that may be overflowing? You say "lightly loaded," but how much does that actually equate to in kb/s or Mb/s? I'd call anything less than about 1Mb/s on a GB ethernet link pretty light, but other people have different ideas. Check for duplex mismatch -- normally everything just works allowing the NIC and the switch to autonegotiate, but every so often some bright spark gets the idea that wiring down the speed setting is a good idea. Trouble is you have to set *both* ends of the ethernet link to the same settings -- if one end is trying to auto and the other is fixed, you'll end up with the auto end defaulting to 100baseTX half-duplex and performance will suck, and suck increasingly hard as network load goes up. Amazing how often that 'set both ends the same' thing leads to grief= =2E Another hideously embarrassing error would be to spend ages debugging before finding out you had a duplicate IP number on your network. Can you definitely rule that out? A third networking problem that also has the potential to make you the butt of a few jokes is if your network cables are kinked, crushed, over stretched or simply cable-tied too tightly. Anything like that can cause signal leakage between the pairs of conductors in the cable which can be enough to disrupt packet transmission. Simply snipping through a too-tight cable tie can have a magical-seeming effect. What sort on NICs are there on your machine? It's well known that re(4) interfaces simply cannot keep up with the throughput of a good server NIC like em(4) or bge(4). [But re(4)'s are cheap and good enough for most home systems...] If you can try swapping in a reasonably good NIC card -- beg, borrow or steal from another machine just for a few hours to use for testing -- and see if that cures the problem. Other considerations: are you doing anything beyond just plain ethernet networking? Any VLANS? What about ipsec or other tunnelled/encapsulated traffic? Are you using RSTP or lagg to make your networking resilient to failures? If the answer to any of these is "yes" -- does temporarily disabling that feature and doing it simple and stupid help with the packet loss? Do you get the same sort of packet loss if you take the switch away and just run a cable direct between two machines. (Nb. If your NICs don't support MSIx you'll need a crossover cable.) On another host on your net, can you use wireshark to capture and examine the traffic from your failing machine? For best results, either wire the two machines directly together or configure the switch port your wireshark box is connected to as a /monitor/ port so it sees all the traffic coming out of your problem box. Does your NIC have hardware checksumming? If so, does disabling that help with the error rate? (see ifconfig(8) and the man page for your NIC in section 4 for how.) There have been a number of instances of buggy checksumming causing problems in the past. Nb. with hardware checksumming, the checksum field is calculated and inserted in packets very late; after any way of examining the packets as they leave your machine has ceased to be possible. Makes it look like the checksums are all wrong if you sample the traffic on the originating machine. This is why you need to use another, external machine to watch for this sort of error. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------enig88A62592967565C69995833A Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7MG9EACgkQ8Mjk52CukIypbACdEMm/uOze6c/66UfuJmFG+uLh kb8AnRQ9IGvHaP53pQl5dmyG1rH8NL2B =KbEg -----END PGP SIGNATURE----- --------------enig88A62592967565C69995833A-- From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 22:03:01 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 95201106564A for ; Tue, 22 Nov 2011 22:03:01 +0000 (UTC) (envelope-from j65nko@gmail.com) Received: from mail-qw0-f54.google.com (mail-qw0-f54.google.com [209.85.216.54]) by mx1.freebsd.org (Postfix) with ESMTP id 58EAE8FC26 for ; Tue, 22 Nov 2011 22:03:01 +0000 (UTC) Received: by qadc10 with SMTP id c10so706643qad.13 for ; Tue, 22 Nov 2011 14:03:00 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=O6ElV2fH9Tl3YVA6GQ/A04jvkMtgUj9wSzftiobAbKE=; b=BKpC9Zhe/sVwKx3vS96qVPDh4bcoydJVU2Kc+863UzoLjYdD5DnCIXSoCiR9UCRhX7 YADizUDvkXexicrbObTdJM80GFfqFFKbOlVJvYD0Uzg+pAIBagotnCtzomB9S12ygnk+ 2N/0r8jzYS7+tEaNHchTQkILoUc8J9oLaAtPM= MIME-Version: 1.0 Received: by 10.224.194.137 with SMTP id dy9mr10006265qab.65.1321999380664; Tue, 22 Nov 2011 14:03:00 -0800 (PST) Received: by 10.229.82.66 with HTTP; Tue, 22 Nov 2011 14:03:00 -0800 (PST) In-Reply-To: References: Date: Tue, 22 Nov 2011 23:03:00 +0100 Message-ID: From: J65nko To: Kees Jan Koster Content-Type: text/plain; charset=ISO-8859-1 Cc: freebsd-questions@freebsd.org Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 22:03:01 -0000 On Tue, Nov 22, 2011 at 9:33 PM, Kees Jan Koster wrote: > Dear All, > > I am stuck with a machine that shows serious packet loss (about 1% of all traffic is dropped). I tried the obvious (new network cable, different switch port, different ethernet interface on the machine), but the problems remain. > > Another machine that sits in the same rack and is hooked up to the same switch shows no such packet loss issues. The problematic machine is a dual Opteron with FreeBSD 8.2-STABLE from Thu Aug 11 14:05:47 CEST 2011. > > The machine is lightly loaded. A MySQL slave is running, but the machine is not serving queries. Plus a Munin server process. > > I am at a loss where to start diagnosing this. Can you advise me where to look? Are there network buffers that may be overflowing? > -- To check input/output errors and collisions : netstat -in Detailed TCP/IP statistics: netstat -s or netstat -ss Checking Receive and Send Queue : netstat -an -f inet Buffers: netstat -m Adriaan From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 22:11:20 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7D52F1065675 for ; Tue, 22 Nov 2011 22:11:20 +0000 (UTC) (envelope-from kjkoster@gmail.com) Received: from mail-gy0-f182.google.com (mail-gy0-f182.google.com [209.85.160.182]) by mx1.freebsd.org (Postfix) with ESMTP id 3976C8FC1E for ; Tue, 22 Nov 2011 22:11:19 +0000 (UTC) Received: by ghbg15 with SMTP id g15so417213ghb.13 for ; Tue, 22 Nov 2011 14:11:19 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=subject:mime-version:content-type:from:in-reply-to:date:cc :content-transfer-encoding:message-id:references:to:x-mailer; bh=6MW0JDfWSRtZD9tiYPE7y5s9J2g+tH4cIyv6aZiebnc=; b=JHsqZZWx1F45+1CuvV7s71caVcbvpwvWay15oZeQbkJ0GXp2NtmDsSX/ebY1nAasEx 4OdACZgc+IBRc6yWVZut/MZWmqW78pdgVkOjyL+cHjzS/qDS1fPbV2IJqVIsfZGL+Fst TI0cF8JKEzA09vCY6eBFBfnvRMJ9DTI6cUWgE= Received: by 10.213.22.203 with SMTP id o11mr722489ebb.65.1321999877807; Tue, 22 Nov 2011 14:11:17 -0800 (PST) Received: from macbookpro.fritz.box (kjkoster.org. [83.163.197.206]) by mx.google.com with ESMTPS id o4sm45872162eeb.0.2011.11.22.14.11.16 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 22 Nov 2011 14:11:17 -0800 (PST) Mime-Version: 1.0 (Apple Message framework v1251.1) Content-Type: text/plain; charset=iso-8859-1 From: Kees Jan Koster In-Reply-To: Date: Tue, 22 Nov 2011 23:11:15 +0100 Content-Transfer-Encoding: quoted-printable Message-Id: <763864D4-CC19-4473-AFAF-D22EF94E08A2@gmail.com> References: <2973_1321996526_4ECC10EE_2973_123_1_D9B37353831173459FDAA836D3B43499D2C69D77@WADPMBXV0.waddell.com> <4B28ADC5-8325-442E-8F02-9AE3535D8C6D@gmail.com> To: Michael Sierchio X-Mailer: Apple Mail (2.1251.1) Cc: Gary Gatten , "freebsd-questions@freebsd.org" Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 22:11:20 -0000 Dear Michael, [kjkoster@saffron ~]$ ifconfig bge0 bge0: flags=3D8843 metric 0 mtu = 1500 = options=3D8009b ether 00:e0:81:32:ed:b4 inet 91.196.169.165 netmask 0xfffffff8 broadcast 91.196.169.167 inet 91.196.169.166 netmask 0xffffffff broadcast 91.196.169.166 media: Ethernet autoselect (100baseTX = ) status: active [kjkoster@saffron ~]$ fgrep bge0 /etc/rc.conf=20 ifconfig_bge0=3D"inet 91.196.169.165 netmask 255.255.255.248" ifconfig_bge0_alias0=3D"91.196.169.166 netmask 255.255.255.255" That broadcast address and netmask look wrong for sure. Should I just change that to 255.255.255.248 as well? Kees Jan On 22 Nov 2011, at 23:00, Michael Sierchio wrote: > On Tue, Nov 22, 2011 at 1:58 PM, Kees Jan Koster = wrote: >=20 >> Thank you for your reply. Your comment about dupe IP triggered = something that I failed to mention: the interface is aliased. It has two = IP addresses. IP address a and it has an alias IP address b. I just = tested binding mtr to each of these interfaces separately to measure = packet loss. >=20 > Show us the ifconfig output. My guess is that the alias is > incorrectly configured. -- Kees Jan http://java-monitor.com/ kjkoster@kjkoster.org +31651838192 I hate unit tests; I much prefer the illusion that there are no errors = in my code. -- = Hendrik Muller From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 22:26:15 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DD4E3106567D for ; Tue, 22 Nov 2011 22:26:14 +0000 (UTC) (envelope-from amvandemore@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 6B99E8FC12 for ; Tue, 22 Nov 2011 22:26:14 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so1062221bkb.13 for ; Tue, 22 Nov 2011 14:26:13 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=N9BX2Z4lYoyQVn2pzd4Z3EGoGP37mrrffbIQiMtdofI=; b=DfybUuRlLn0Cji35eHEzLRdi74lYRpzFLZM4mrexNm67/qLaprbdL4fupjIfvnjE92 azsLUQvwUn8qhLayD7exiBHOYlcryay3Iu6vymRekBzI0AVeQWzlaglKp+AwMFC/Zgwc cu5OWIYpsw4sgX6AAppvZVYZSJZhMkMBjFiEc= MIME-Version: 1.0 Received: by 10.205.142.4 with SMTP id jg4mr14556857bkc.119.1322000772925; Tue, 22 Nov 2011 14:26:12 -0800 (PST) Received: by 10.223.88.72 with HTTP; Tue, 22 Nov 2011 14:26:12 -0800 (PST) In-Reply-To: <763864D4-CC19-4473-AFAF-D22EF94E08A2@gmail.com> References: <2973_1321996526_4ECC10EE_2973_123_1_D9B37353831173459FDAA836D3B43499D2C69D77@WADPMBXV0.waddell.com> <4B28ADC5-8325-442E-8F02-9AE3535D8C6D@gmail.com> <763864D4-CC19-4473-AFAF-D22EF94E08A2@gmail.com> Date: Tue, 22 Nov 2011 16:26:12 -0600 Message-ID: From: Adam Vande More To: Kees Jan Koster Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Gary Gatten , Michael Sierchio , "freebsd-questions@freebsd.org" Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 22:26:15 -0000 On Tue, Nov 22, 2011 at 4:11 PM, Kees Jan Koster wrote: > [kjkoster@saffron ~]$ ifconfig bge0 > bge0: flags=8843 metric 0 mtu 1500 > > options=8009b > ether 00:e0:81:32:ed:b4 > inet 91.196.169.165 netmask 0xfffffff8 broadcast 91.196.169.167 > inet 91.196.169.166 netmask 0xffffffff broadcast 91.196.169.166 > media: Ethernet autoselect (100baseTX > ) > status: active > [kjkoster@saffron ~]$ fgrep bge0 /etc/rc.conf > ifconfig_bge0="inet 91.196.169.165 netmask 255.255.255.248" > ifconfig_bge0_alias0="91.196.169.166 netmask 255.255.255.255" > > That broadcast address and netmask look wrong for sure. > > Should I just change that to 255.255.255.248 as well? > No, that is correct. Leave your alias alone if you want it to continue to work. -- Adam Vande More From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 22:32:32 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C15F41065674 for ; Tue, 22 Nov 2011 22:32:32 +0000 (UTC) (envelope-from kudzu@tenebras.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 5A9C48FC18 for ; Tue, 22 Nov 2011 22:32:32 +0000 (UTC) Received: by faap15 with SMTP id p15so1393421faa.13 for ; Tue, 22 Nov 2011 14:32:31 -0800 (PST) MIME-Version: 1.0 Received: by 10.180.4.102 with SMTP id j6mr21285096wij.38.1322001151237; Tue, 22 Nov 2011 14:32:31 -0800 (PST) Received: by 10.180.81.193 with HTTP; Tue, 22 Nov 2011 14:32:31 -0800 (PST) In-Reply-To: References: <2973_1321996526_4ECC10EE_2973_123_1_D9B37353831173459FDAA836D3B43499D2C69D77@WADPMBXV0.waddell.com> <4B28ADC5-8325-442E-8F02-9AE3535D8C6D@gmail.com> <763864D4-CC19-4473-AFAF-D22EF94E08A2@gmail.com> Date: Tue, 22 Nov 2011 14:32:31 -0800 Message-ID: From: Michael Sierchio To: Adam Vande More Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: Kees Jan Koster , Gary Gatten , "freebsd-questions@freebsd.org" Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 22:32:32 -0000 Matthew suggests turning off hardware checksums - it won't hurt to give that a try: ifconfig bge0 media 100baseTX mediaopt -txcsum On Tue, Nov 22, 2011 at 2:26 PM, Adam Vande More wr= ote: > On Tue, Nov 22, 2011 at 4:11 PM, Kees Jan Koster wro= te: >> >> [kjkoster@saffron ~]$ ifconfig bge0 >> bge0: flags=3D8843 metric 0 mtu = 1500 >> >> =A0options=3D8009b >> =A0 =A0 =A0 =A0ether 00:e0:81:32:ed:b4 >> =A0 =A0 =A0 =A0inet 91.196.169.165 netmask 0xfffffff8 broadcast 91.196.1= 69.167 >> =A0 =A0 =A0 =A0inet 91.196.169.166 netmask 0xffffffff broadcast 91.196.1= 69.166 >> =A0 =A0 =A0 =A0media: Ethernet autoselect (100baseTX >> ) >> =A0 =A0 =A0 =A0status: active >> [kjkoster@saffron ~]$ fgrep bge0 /etc/rc.conf >> ifconfig_bge0=3D"inet 91.196.169.165 netmask 255.255.255.248" >> ifconfig_bge0_alias0=3D"91.196.169.166 netmask 255.255.255.255" >> >> That broadcast address and netmask look wrong for sure. >> >> Should I just change that to 255.255.255.248 as well? > > No, that is correct.=A0 Leave your alias alone if you want it to continue= to > work. > > -- > Adam Vande More > From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 22:33:30 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D35C31065679 for ; Tue, 22 Nov 2011 22:33:30 +0000 (UTC) (envelope-from Ggatten@waddell.com) Received: from emlpirnp0.waddell.com (emlpirnp0.waddell.com [67.130.252.22]) by mx1.freebsd.org (Postfix) with ESMTP id 606FD8FC1C for ; Tue, 22 Nov 2011 22:33:30 +0000 (UTC) Received: from mailhost2.waddell.com (HELO emlpfilt2.waddell.com) ([10.1.10.30]) by emlpirnp1.waddell.com with ESMTP; 22 Nov 2011 16:33:29 -0600 Received: from emlpfilt2.waddell.com (localhost [127.0.0.1]) by localhost (Postfix) with SMTP id D50E6308003; Tue, 22 Nov 2011 16:33:29 -0600 (CST) Received: from ADVPHTCAS0.wradvisors.com (advphtcas0.wradvisors.com [192.168.203.228]) by emlpfilt2.waddell.com (Postfix) with ESMTP id CDAB9308002; Tue, 22 Nov 2011 16:33:29 -0600 (CST) Received: from WADPMBXV0.waddell.com ([169.254.1.85]) by ADVPHTCAS0.wradvisors.com ([192.168.203.228]) with mapi; Tue, 22 Nov 2011 16:33:29 -0600 From: Gary Gatten To: 'Adam Vande More' , Kees Jan Koster Date: Tue, 22 Nov 2011 16:33:28 -0600 Thread-Topic: Diagnosing packet loss Thread-Index: AcypZb8UoXF291hBQOeqzp25l0BL3wAAN7fw Message-ID: <17444_1322001209_4ECC2339_17444_66_1_D9B37353831173459FDAA836D3B43499D2C69D83@WADPMBXV0.waddell.com> References: <2973_1321996526_4ECC10EE_2973_123_1_D9B37353831173459FDAA836D3B43499D2C69D77@WADPMBXV0.waddell.com> <4B28ADC5-8325-442E-8F02-9AE3535D8C6D@gmail.com> <763864D4-CC19-4473-AFAF-D22EF94E08A2@gmail.com> In-Reply-To: Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Michael Sierchio , "freebsd-questions@freebsd.org" Subject: RE: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 22:33:30 -0000 I noticed the Ethernet flow control is enabled - or seems to be? Perhaps D= ISABLE Ethernet flow control (rxpause/txpause) in your box AND the switch. ________________________________ From: Adam Vande More [mailto:amvandemore@gmail.com] Sent: Tuesday, November 22, 2011 4:26 PM To: Kees Jan Koster Cc: Michael Sierchio; Gary Gatten; freebsd-questions@freebsd.org Subject: Re: Diagnosing packet loss On Tue, Nov 22, 2011 at 4:11 PM, Kees Jan Koster > wrote: [kjkoster@saffron ~]$ ifconfig bge0 bge0: flags=3D8843 metric 0 mtu 1500 options=3D8009b ether 00:e0:81:32:ed:b4 inet 91.196.169.165 netmask 0xfffffff8 broadcast 91.196.169.167 inet 91.196.169.166 netmask 0xffffffff broadcast 91.196.169.166 media: Ethernet autoselect (100baseTX ) status: active [kjkoster@saffron ~]$ fgrep bge0 /etc/rc.conf ifconfig_bge0=3D"inet 91.196.169.165 netmask 255.255.255.248" ifconfig_bge0_alias0=3D"91.196.169.166 netmask 255.255.255.255" That broadcast address and netmask look wrong for sure. Should I just change that to 255.255.255.248 as well? No, that is correct. Leave your alias alone if you want it to continue to = work. -- Adam Vande More
"This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system."
From owner-freebsd-questions@FreeBSD.ORG Tue Nov 22 23:14:32 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B18DF106564A for ; Tue, 22 Nov 2011 23:14:32 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1-6.sentex.ca [IPv6:2607:f3e0:0:1::12]) by mx1.freebsd.org (Postfix) with ESMTP id 76EEA8FC15 for ; Tue, 22 Nov 2011 23:14:32 +0000 (UTC) Received: from [IPv6:2607:f3e0:0:4:f025:8813:7603:7e4a] (saphire3.sentex.ca [IPv6:2607:f3e0:0:4:f025:8813:7603:7e4a]) by smarthost1.sentex.ca (8.14.5/8.14.4) with ESMTP id pAMNEUrn052522; Tue, 22 Nov 2011 18:14:30 -0500 (EST) (envelope-from mike@sentex.net) Message-ID: <4ECC2CD0.8040902@sentex.net> Date: Tue, 22 Nov 2011 18:14:24 -0500 From: Mike Tancsa Organization: Sentex Communications User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.13) Gecko/20101207 Thunderbird/3.1.7 MIME-Version: 1.0 To: Kees Jan Koster References: In-Reply-To: X-Enigmail-Version: 1.1.1 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Scanned-By: MIMEDefang 2.71 on IPv6:2607:f3e0:0:1::12 Cc: freebsd-questions@freebsd.org Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 22 Nov 2011 23:14:32 -0000 On 11/22/2011 3:33 PM, Kees Jan Koster wrote: > Dear All, > > I am stuck with a machine that shows serious packet loss (about 1% of all traffic is dropped). I tried the obvious (new network cable, different switch port, different ethernet interface on the machine), but the problems remain. What is the output of sysctl -a dev.bge Can you show the stats and config of the switch port its plugged into as well ? ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 04:48:47 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9E1C2106564A for ; Wed, 23 Nov 2011 04:48:47 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from sola.nimnet.asn.au (paqi.nimnet.asn.au [115.70.110.159]) by mx1.freebsd.org (Postfix) with ESMTP id E327A8FC08 for ; Wed, 23 Nov 2011 04:48:46 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by sola.nimnet.asn.au (8.14.2/8.14.2) with ESMTP id pAN4mhLR043641; Wed, 23 Nov 2011 15:48:44 +1100 (EST) (envelope-from smithi@nimnet.asn.au) Date: Wed, 23 Nov 2011 15:48:43 +1100 (EST) From: Ian Smith To: William Bulley In-Reply-To: <20111122164045.GA25322@itcom245.staff.itd.umich.edu> Message-ID: <20111123150244.W72022@sola.nimnet.asn.au> References: <20111122164045.GA25322@itcom245.staff.itd.umich.edu> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: freebsd-questions@freebsd.org, Edward Martinez Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 04:48:47 -0000 On Tue, 22 Nov 2011 11:40:45 -0500, William Bulley wrote: > According to Ian Smith on Sat, 11/19/11 at 13:29: > > > > Unfortunately that concentrates on creating a GPT layout, encouraging a > > Linux-like single (plus a boot) partition - forget using dump/restore - > > and says nothing much about installing over an existing setup with MBR > > partitioning and multiple slices, a not uncommon setup on many existing > > laptops .. eg here I want to install over a previous 7.2-RELEASE 60GB > > slice partitioned as I want it - 1GB /, 4GB /var, 16GB /usr and ~37GB > > /home. Further, I want to preserve /home as is, despite having backups. > > > > sysinstall's partitioning is more sophisticated; you get to specifically > > toggle on or off newfs'ing each partition, as well as specifying newfs > > options if you want. So it's clear whether you'll be newfs'ing / and > > which other partitions, and which you'll be leaving alone, eg /home. > > > > On BETA1 I recorded "Extract Error while extracting base.txz: can't set > > user=0/group=0 for /var/empty Can't update time for /var/empty .." which > > someone/s else also reported, which turned out to be misleading .. the > > basic problem is that the filesystem isn't empty, ie as after newfs. > > I hate to be a pest about this, but bsdinstall just isn't working for me. > I grabbed the 9.0RC2 bootonly ISO for i386 and tried again to load this > onto this Dell laptop. This time the *.txz files had to be gotten over > the network which took longer that with the DVD1 ISO. :-( > > The files were fetched, and checked/verified, then the actual installation > (extraction) began. Unfortunately, I got the same error pop-up message. > This time I have the exact text of that error message: > > "Error while extracting base.txz: Can't > set user=0/group=0 for var/emptyCan't > update time for var/empty" > > Note the missing space or CR before the second "Can't" > > What confused me at first was the missing slash ("/") character before the > two "var" pathnames. But I now understand that is because I am updating > (not installing) from a previously working (was 8.2-STABLE in this case) > system where the four partitions (root, swap, /var, and /usr) are present > and full of FreeBSD files, etc. Sorry William, this arrived not long after I crashed, 18-hour odd time difference .. I've since seen Frank Shute advise how to csup from 8.2-S to RELENG_9_0 and in your case that's likely the easiest way to go. As you see, you got exactly the same error I got with BETA1, and for the same reason - bsdinstall isn't running newfs on your existing partitions before trying to extract the distribution. I thought that was going to be fixed before release, but clearly not yet. It really needs the newfs toggle option of sysinstall/sade before it'll be useful as sysinstall. You'd have to boot your DVD1, go into Live CD (formerly Fixit) mode and run newfs manually - if running sysinstall from there doesn't work? I recall your 8.2 system was on slice 1, so likely: # newfs /dev/ad0s1a # / # newfs /dev/ad0s1e; newfs /dev/ad0s1f # /usr, /var Then probably have to reboot DVD1 - I don't know if you can get back into the installer from fixit mode? - then the install should work, but of course you've by then lost your 8.2 system entirely. > If this is a "feature" of bsdinstall, then it should be mentioned in the > documentation somewhere. I used the "Manual" configuration method where > I was asked to name the mount points for root, /var and /usr. My question > is this: "if bsdinstall can't handle installing over top of an already > existing system on disk, then why ask the user for mount points on those > already existing partitions?" This seems weird to me. The docs are very much a work in progress. Even sysinstall requires you to at least enter the mountpoints for your existing partitions (within a slice); they're needed for install and of course to build /etc/fstab. In my case, wanting to preserve /home, seems I'll have to NOT supply a mountpoint for that partition in order for it to be left alone, and then add it into fstab afterwards, probably having to merge any newly created user there from /usr/home, revert the symlink etc. Messy. > So now I am back to square one. I want to load 9.0RC2 onto this laptop > for reasons that aren't relevant to this thread, yet I am unable to do > so because as of 9.0 sysinstall has been replaced by bsdinstall. Did you try running sysinstall (or sade), just to do the slicing + partitioning / newfs'ing from Live CD mode, only on DVD1 I guess? > For the record, how do I upgrade to 9.0RC2 (or any 9.0 variant) from a > system already running 8.2-STABLE? Had this attempt been using the > sysinstall method, I would have long since been up and running FreeBSD > 9.x on this laptop. Please advise. Thanks in advance. In your case I think a source upgrade and building is probably the way to go. In my case, my 8.2 is on another slice (s4), but I want 9.0 on s2, over an existing 7.4-RELEASE, because that slice has enough space for a decent ongoing 9.x system, and because I'd hoped to contribute to debugging bsdinstall - but then I moved and had no net access for nearly a month. Still, I'm persisting with that plan and I'll keep hassling until this regression in functionality is fixed, for 9.1 now I guess. cheers, Ian From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 05:41:30 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DAC27106564A for ; Wed, 23 Nov 2011 05:41:30 +0000 (UTC) (envelope-from mcg@sulfegate.org) Received: from mail-gx0-f182.google.com (mail-gx0-f182.google.com [209.85.161.182]) by mx1.freebsd.org (Postfix) with ESMTP id 999948FC14 for ; Wed, 23 Nov 2011 05:41:30 +0000 (UTC) Received: by ggnk5 with SMTP id k5so1447716ggn.13 for ; Tue, 22 Nov 2011 21:41:30 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sulfegate.org; s=google; h=mime-version:sender:x-originating-ip:in-reply-to:references:from :date:x-google-sender-auth:message-id:subject:to:cc:content-type :content-transfer-encoding; bh=F9uuBpWVDzr10zAmUC+SxRhvT6ujxgipdraNBBR0cyA=; b=Ambfck1g06jtHqA0qlCt8U3xSNpchfHj1a90utRjXQIg0lhXkOhBlKDAMNDesWfRiy pZrtUHLT9O2ndUwrW40psl4Z3/7qMC7eXdy7roo/dQ5hOaMWVRkqayrAVo4OswFCB5td 0lN5+L5rn/hPvjH6+mM+wsQ3FGuFyZQ7FFPAA= Received: by 10.68.16.166 with SMTP id h6mr4872528pbd.84.1322026889092; Tue, 22 Nov 2011 21:41:29 -0800 (PST) MIME-Version: 1.0 Sender: mcg@sulfegate.org Received: by 10.142.84.4 with HTTP; Tue, 22 Nov 2011 21:40:58 -0800 (PST) X-Originating-IP: [98.170.233.66] In-Reply-To: <20111122215927.A943210656DB@hub.freebsd.org> References: <20111122215927.A943210656DB@hub.freebsd.org> From: "Galati, Michael" Date: Tue, 22 Nov 2011 23:40:58 -0600 X-Google-Sender-Auth: aGvpXgtLwOlzueQmWwrcedCt7nE Message-ID: To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: William Bulley Subject: Re: freebsd-questions Digest, Vol 390, Issue 3 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 05:41:30 -0000 > Date: Tue, 22 Nov 2011 13:56:23 -0500 > From: William Bulley > Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? > To: Frank Shute > Cc: FreeBSD Questions > Message-ID: <20111122185623.GA25594@itcom245.staff.itd.umich.edu> > Content-Type: text/plain; charset=3Dus-ascii > > According to Frank Shute on Tue, 11/22/11 at 13:36: > > > > Can't help you with your bsdinstall woes but to upgrade from > > 8.2-STABLE to 9.0-RELEASE(currently RC2) branch you want to do a > > csup(1)/buildworld cycle. > > > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.htm= l > > > > You should use the tag: > > > > *default release=3Dcvs tag=3DRELENG_9_0 > > > > in your supfile. More details at: > > > > http://www.shute.org.uk/misc/freebsd_uptodate.html > > Thanks. =A0:) > > Perhaps you came into this thread late, but that was my first attempt. > But at that time, a few weeks ago, we were still at 9.0RC1 and my then > buildworld/installworld attempt failed during the kernel compile step. > > Now that 9.0RC2 is available, I reckon it is worth a try dealing with > the csup/buildworld/installworld process. =A0I hope this works this time. > If you still have trouble compiling, you could always do a fresh install off one of the 9.0-RC2 images on a spare machine (or on virtual machine; VirtualBox works well for this), and build the sources there. Once the make build{world,kernel} steps complete, copy (or export over NFS) /usr/{src,obj} to the machine to be upgraded, and do the usual make install{kernel,world} (and mergemaster) steps. I just did this just yesterday to bring a test box up from stable/8 to stable/9; worked like a charm. YMMV. Apparently freebsd-update(8) works for binary updates as well, but I've never used it (check the release announcement on freebsd-current or freebsd-stable from the 17th). Good luck! ^_^' - Mike From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 07:20:44 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 81AA1106566B for ; Wed, 23 Nov 2011 07:20:44 +0000 (UTC) (envelope-from b.smeelen@ose.nl) Received: from mail.ose.nl (mail.ose.nl [212.178.134.164]) by mx1.freebsd.org (Postfix) with ESMTP id 1F1178FC0C for ; Wed, 23 Nov 2011 07:20:42 +0000 (UTC) X-Footer: b3NlLm5s Received: from localhost ([127.0.0.1]) by mail.ose.nl (using TLSv1/SSLv3 with cipher AES256-SHA (256 bits)) for freebsd-questions@freebsd.org; Wed, 23 Nov 2011 08:20:40 +0100 Message-ID: <4ECC9EC8.3050104@ose.nl> Date: Wed, 23 Nov 2011 08:20:40 +0100 From: Bas Smeelen User-Agent: Mozilla/5.0 (X11; Linux i686; rv:5.0) Gecko/20110627 Thunderbird/5.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <4ECBBD0B.6090600@ose.nl> <4ECBC951.3080800@infracaninophile.co.uk> In-Reply-To: <4ECBC951.3080800@infracaninophile.co.uk> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: 9.0-PRERELEASE slow scp transfer X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 07:20:44 -0000 On 11/22/2011 05:09 PM, Matthew Seaman wrote: > On 22/11/2011 15:17, Bas Smeelen wrote: >> When i copy a file with scp which is a few hundred megabytes on2. from 1.i >> get about 130 KB/s >> >> I can find nothing in the logs or netstat errors on this 9.0-PRERELEASE box. >> I have switched network kabels and ports on the switch. >> >> How could i further investigate? > Check the duplex settings in ifconfig(8) output on all three machines. > They should all say: > > media: Ethernet autoselect (1000baseTX ) > > assuming you're not forcing everything to a particular speed. Any > mention of '100baseTX ' indicates a failure to negotiate > the link settings, which could well be due to a hardware problem. Mind > you, in that case you'ld see plenty of errors in the output of 'netstat -i' > > If that's not the problem then it sounds like you've eliminated all the > obvious causes. Which means a bug in 9.0-PRERELEASE, so please bring > this up on freebsd-current@... where it should come to the attention of > the developers working on getting 9.0 out of the door. Include 'pciconf > -lbv' output for the NICs and PHYs on all three machines if you would be > so kind. > > Cheers, > > Matthew > OK, thanks for the reply. They're all autonegotiated (1) 7.3-RELEASE-p2 has 1000baseTX (2) 9.0-PRERELEASE has 1000baseT (3) 7.4-RELEASE-p4 has 1000baseTX So I have switched the cables of (1) and (2) but ifconfig output stays the same, though I would suspect that (1) would become 1000baseT and (2) would become 1000baseTX I have rebooted (2) just to make sure, but still no change in de output of ifconfig Putting (2) on another port of the switch doesn't change ifconfig output either But it's solved! scp now completes with: 100% 338MB 30.7MB/s 00:11 Hmm still it should be able to go up to 120MB/s, but this could a limitation somewhere else Sorry for the noise Disclaimer: http://www.ose.nl/email From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 08:28:09 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 094401065670 for ; Wed, 23 Nov 2011 08:28:09 +0000 (UTC) (envelope-from kjkoster@gmail.com) Received: from mail-ww0-f50.google.com (mail-ww0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id 9068E8FC12 for ; Wed, 23 Nov 2011 08:28:08 +0000 (UTC) Received: by wwg14 with SMTP id 14so1884542wwg.31 for ; Wed, 23 Nov 2011 00:28:07 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=subject:mime-version:content-type:from:in-reply-to:date:cc :content-transfer-encoding:message-id:references:to:x-mailer; bh=ySYZfAKcT2JZjzClYCltVZax5Bpemg8PF77CoqSBy88=; b=Pe45upktF5qwIeL4ZNddJafGlLrUIUPH7Y6NnC/tUxnddZ8Ts+4GMSM70WGnJOsu6I FPwX1knoV6IGqlMb0NvvgmO6GuwDd/DIJDZuN7hfonjLPHKeCFJLsYHCc/rDQR/xj4oh 4MUtkREB00L+Zge2i+1ljk86RpkVFL8xbPY6A= Received: by 10.216.14.132 with SMTP id d4mr3600910wed.37.1322036887365; Wed, 23 Nov 2011 00:28:07 -0800 (PST) Received: from macbookpro.fritz.box (kjkoster.org. [83.163.197.206]) by mx.google.com with ESMTPS id em10sm7866469wib.21.2011.11.23.00.28.06 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 23 Nov 2011 00:28:06 -0800 (PST) Mime-Version: 1.0 (Apple Message framework v1251.1) Content-Type: text/plain; charset=iso-8859-1 From: Kees Jan Koster In-Reply-To: <4ECC2CD0.8040902@sentex.net> Date: Wed, 23 Nov 2011 09:28:04 +0100 Content-Transfer-Encoding: quoted-printable Message-Id: References: <4ECC2CD0.8040902@sentex.net> To: Mike Tancsa X-Mailer: Apple Mail (2.1251.1) Cc: freebsd-questions@freebsd.org Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 08:28:09 -0000 Dear Mike, >> I am stuck with a machine that shows serious packet loss (about 1% of = all traffic is dropped). I tried the obvious (new network cable, = different switch port, different ethernet interface on the machine), but = the problems remain. >=20 > What is the output of > sysctl -a dev.bge See below. > Can you show the stats and config of the switch port its plugged into = as > well ? It is not configurable. No serial port, so I guess this is really a = glorified hub. [kjkoster@saffron ~]$ uptime 8:27AM up 1 day, 1:18, 1 user, load averages: 0.50, 0.45, 0.43 [kjkoster@saffron ~]$ sysctl -a dev.bge.0 dev.bge.0.%desc: Broadcom Gigabit Ethernet Controller, ASIC rev. = 0x002003 dev.bge.0.%driver: bge dev.bge.0.%location: slot=3D9 function=3D0 handle=3D\_SB_.PCI0.GOLA.GLAN dev.bge.0.%pnpinfo: vendor=3D0x14e4 device=3D0x1648 subvendor=3D0x14e4 = subdevice=3D0x1644 class=3D0x020000 dev.bge.0.%parent: pci2 dev.bge.0.forced_collapse: 0 dev.bge.0.forced_udpcsum: 0 dev.bge.0.stats.FramesDroppedDueToFilters: 0 dev.bge.0.stats.DmaWriteQueueFull: 0 dev.bge.0.stats.DmaWriteHighPriQueueFull: 0 dev.bge.0.stats.NoMoreRxBDs: 0 dev.bge.0.stats.InputDiscards: 0 dev.bge.0.stats.InputErrors: 0 dev.bge.0.stats.RecvThresholdHit: 3680296 dev.bge.0.stats.DmaReadQueueFull: 3810 dev.bge.0.stats.DmaReadHighPriQueueFull: 0 dev.bge.0.stats.SendDataCompQueueFull: 0 dev.bge.0.stats.RingSetSendProdIndex: 707120 dev.bge.0.stats.RingStatusUpdate: 4275217 dev.bge.0.stats.Interrupts: 4275218 dev.bge.0.stats.AvoidedInterrupts: 0 dev.bge.0.stats.SendThresholdHit: 0 dev.bge.0.stats.rx.ifHCInOctets: 772506284 dev.bge.0.stats.rx.Fragments: 0 dev.bge.0.stats.rx.UnicastPkts: 776204 dev.bge.0.stats.rx.MulticastPkts: 728 dev.bge.0.stats.rx.FCSErrors: 0 dev.bge.0.stats.rx.AlignmentErrors: 0 dev.bge.0.stats.rx.xonPauseFramesReceived: 1 dev.bge.0.stats.rx.xoffPauseFramesReceived: 1 dev.bge.0.stats.rx.ControlFramesReceived: 0 dev.bge.0.stats.rx.xoffStateEntered: 1 dev.bge.0.stats.rx.FramesTooLong: 0 dev.bge.0.stats.rx.Jabbers: 0 dev.bge.0.stats.rx.UndersizePkts: 0 dev.bge.0.stats.rx.inRangeLengthError: 0 dev.bge.0.stats.rx.outRangeLengthError: 0 dev.bge.0.stats.tx.ifHCOutOctets: 212962495 dev.bge.0.stats.tx.Collisions: 0 dev.bge.0.stats.tx.XonSent: 0 dev.bge.0.stats.tx.XoffSent: 0 dev.bge.0.stats.tx.flowControlDone: 0 dev.bge.0.stats.tx.InternalMacTransmitErrors: 0 dev.bge.0.stats.tx.SingleCollisionFrames: 0 dev.bge.0.stats.tx.MultipleCollisionFrames: 0 dev.bge.0.stats.tx.DeferredTransmissions: 0 dev.bge.0.stats.tx.ExcessiveCollisions: 0 dev.bge.0.stats.tx.LateCollisions: 0 dev.bge.0.stats.tx.UnicastPkts: 701087 dev.bge.0.stats.tx.MulticastPkts: 0 dev.bge.0.stats.tx.BroadcastPkts: 5422 dev.bge.0.stats.tx.CarrierSenseErrors: 0 dev.bge.0.stats.tx.Discards: 0 dev.bge.0.stats.tx.Errors: 0 dev.bge.0.wake: 0 -- Kees Jan http://java-monitor.com/ kjkoster@kjkoster.org +31651838192 The secret of success lies in the stability of the goal. -- Benjamin = Disraeli From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 08:50:21 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8D361106566B for ; Wed, 23 Nov 2011 08:50:21 +0000 (UTC) (envelope-from ml@netfence.it) Received: from cp-out7.libero.it (cp-out7.libero.it [212.52.84.107]) by mx1.freebsd.org (Postfix) with ESMTP id 0BDEE8FC14 for ; Wed, 23 Nov 2011 08:50:20 +0000 (UTC) X-CTCH-Spam: Unknown X-CTCH-RefID: str=0001.0A0B020B.4ECCB3CB.00C3,ss=1,re=0.000,fgs=0 X-libjamoibt: 1555 Received: from soth.ventu (151.41.193.58) by cp-out7.libero.it (8.5.133) id 4E9539DD060E9A0F for freebsd-questions@freebsd.org; Wed, 23 Nov 2011 09:50:19 +0100 Received: from alamar.ventu (alamar.ventu [10.1.2.18]) by soth.ventu (8.14.5/8.14.4) with ESMTP id pAN8oD8K022453 for ; Wed, 23 Nov 2011 09:50:13 +0100 (CET) (envelope-from ml@netfence.it) Message-ID: <4ECCB3C5.4090402@netfence.it> Date: Wed, 23 Nov 2011 09:50:13 +0100 From: Andrea Venturoli User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; it-IT; rv:1.9.2.24) Gecko/20111110 Thunderbird/3.1.16 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <4EB7DD00.3070103@netfence.it> <4EB7F784.7020104@netfence.it> <4EB7F965.2010403@eurolog.com> In-Reply-To: <4EB7F965.2010403@eurolog.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Scanned-By: MIMEDefang 2.72 on 10.1.2.13 Subject: Re: Monitor directory and execute script X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 08:50:21 -0000 On 11/07/11 16:29, Frank Brendel wrote: > || > I think sysutils/wait_on is what you are looking for. Thanks, that's exactly it! bye av. From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 08:52:19 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4D69A106566C for ; Wed, 23 Nov 2011 08:52:19 +0000 (UTC) (envelope-from ml@netfence.it) Received: from cp-out7.libero.it (cp-out7.libero.it [212.52.84.107]) by mx1.freebsd.org (Postfix) with ESMTP id C10438FC18 for ; Wed, 23 Nov 2011 08:52:18 +0000 (UTC) X-CTCH-Spam: Unknown X-CTCH-RefID: str=0001.0A0B0206.4ECCB441.0205,ss=1,re=0.000,fgs=0 X-libjamoibt: 1555 Received: from soth.ventu (151.41.193.58) by cp-out7.libero.it (8.5.133) id 4E9539DD060EADCA; Wed, 23 Nov 2011 09:52:17 +0100 Received: from alamar.ventu (alamar.ventu [10.1.2.18]) by soth.ventu (8.14.5/8.14.4) with ESMTP id pAN8qEbl022859; Wed, 23 Nov 2011 09:52:14 +0100 (CET) (envelope-from ml@netfence.it) Message-ID: <4ECCB43E.7080403@netfence.it> Date: Wed, 23 Nov 2011 09:52:14 +0100 From: Andrea Venturoli User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; it-IT; rv:1.9.2.24) Gecko/20111110 Thunderbird/3.1.16 MIME-Version: 1.0 To: Pegasus Mc Cleaft , freebsd-questions@freebsd.org References: <4EC38D1C.30205@netfence.it> <005601cca452$3a21f800$ae65e800$@com> <4EC3A608.8010905@netfence.it> <006101cca459$1e2dbba0$5a8932e0$@com> In-Reply-To: <006101cca459$1e2dbba0$5a8932e0$@com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit X-Scanned-By: MIMEDefang 2.72 on 10.1.2.13 Cc: Subject: Re: ATA trouble again X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 08:52:19 -0000 On 11/16/11 13:13, Pegasus Mc Cleaft wrote: >>> or do you know if the drives are using 4096 bytes Per sector? >>> >> How do I find out without physical access to the box? > > The only way to be sure is to look at the datasheet for the drive. If the drives are SMART capable, you can always load Smart Monitoring Tools (/usr/ports/sysutils/smartmontools) and have it report the make and model of the drive. Just be careful, the report from the SMART data will more than likely show the drive as 512 Logical and Physical access (Even if they are not) So: the specs, smartctl and diskinfo all say sectors are 512 bytes. I tried disabling AHCI in the BIOS and, for now, this seems to work better. I'll keep you informed if troubles persist. bye & Thanks av. From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 11:39:35 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A4CEC106564A for ; Wed, 23 Nov 2011 11:39:35 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id 725DC8FC15 for ; Wed, 23 Nov 2011 11:39:35 +0000 (UTC) Received: by iakl21 with SMTP id l21so2249394iak.13 for ; Wed, 23 Nov 2011 03:39:35 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type :content-transfer-encoding:message-id; bh=zdpSEnXxeKyIWo7TAY3BpewKKRD2/IynAwkAB+ZBVXE=; b=T+E6YnWIQHcMYI88B7RKyLw3v3BcHVhaD1XtMtCmtxr0Txqwt8c8qfUvqlOd7OT+9j LMXc9MxqwuS2bux4FNPFnZJrPeL8XP+nJ/eN8ibfSslQeRnnstCzfIii3ZjsKPRk86mD sEgnHuSC1IRTSpGngg1MZwUylDFqh+f9TIJw0= Received: by 10.42.19.195 with SMTP id d3mr2352711icb.21.1322048375025; Wed, 23 Nov 2011 03:39:35 -0800 (PST) Received: from luna.wi.rr.com (cpe-184-58-138-79.wi.res.rr.com. [184.58.138.79]) by mx.google.com with ESMTPS id jm11sm72537676ibb.1.2011.11.23.03.39.30 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 23 Nov 2011 03:39:30 -0800 (PST) From: ajtiM To: freebsd-questions@freebsd.org Date: Wed, 23 Nov 2011 05:39:21 -0600 User-Agent: KMail/1.13.7 (FreeBSD/9.0-RC2; KDE/4.7.3; i386; ; ) MIME-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <201111230539.21395.lumiwa@gmail.com> Subject: .config X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 11:39:35 -0000 Hi! I succesfully installed FreeBSD 9.0 RC-2 and I didn't have problems with bsdinstall and others. What I didn't have on 8.2 is when I start KDE4 with startx I got directory .config in /. I have one .config in /home but what it happened? When I deleted as root and I start again KDE4 as user I got it again. Inside is a file Trolltech.conf (the same is in /home/.config). Thanks in advance. Mitja -------- http://jpgmag.com/people/lumiwa From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 11:43:40 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 04290106566C for ; Wed, 23 Nov 2011 11:43:40 +0000 (UTC) (envelope-from mueller6727@bellsouth.net) Received: from fmailhost04.isp.att.net (fmailhost04.isp.att.net [207.115.11.54]) by mx1.freebsd.org (Postfix) with ESMTP id E8D288FC17 for ; Wed, 23 Nov 2011 11:43:39 +0000 (UTC) Date: Wed, 23 Nov 2011 11:39:13 +0000 (GMT) X-Comment: Sending client does not conform to RFC822 minimum requirements X-Comment: Date has been added by Maillennium Received: from localhost (adsl-68-210-130-165.sdf.bellsouth.net[68.210.130.165]) by isp.att.net (frfwmhc04) with SMTP id <20111123113912H0400477b6e>; Wed, 23 Nov 2011 11:39:12 +0000 X-Originating-IP: [68.210.130.165] From: "Thomas Mueller" To: freebsd-questions@FreeBSD.org Message-Id: <20111123114340.04290106566C@hub.freebsd.org> Cc: Subject: "options atapicam" and/or "device ATA_CAM" in kernel config? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 11:43:40 -0000 What is the role of "options atapicam" and "device ATA_CAM" in kernel config file? Are they redundant? Kernel will build with both these options, but will it make things go awry? Is ATA_CAM deprecated? I am trying to burn a CD (or DVD) on a SATA DVD-RW drive, but cdrtools don't work. Also, how do I build and install a kernel to some name other than /boot/kernel, and not build all modules in duplicate? I might want to try kernels with some differences in options, but with the same modules. NetBSD and Linux make it easy to choose a non-default name for the kernel, so I can have multiple kernels and choose one at boot. In Linux, beginning with kernels 2.6.*, cdrtools work without the ATA-SCSI dance. Tom From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 11:44:56 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 74D001065673 for ; Wed, 23 Nov 2011 11:44:56 +0000 (UTC) (envelope-from guru@unixarea.de) Received: from ms16-1.1blu.de (ms16-1.1blu.de [89.202.0.34]) by mx1.freebsd.org (Postfix) with ESMTP id 0E9F48FC12 for ; Wed, 23 Nov 2011 11:44:55 +0000 (UTC) Received: from [88.217.15.152] (helo=localhost.my.domain) by ms16-1.1blu.de with esmtpsa (TLS-1.0:DHE_RSA_AES_256_CBC_SHA1:32) (Exim 4.69) (envelope-from ) id 1RTBFt-00051z-5f for freebsd-questions@freebsd.org; Wed, 23 Nov 2011 12:44:45 +0100 Received: from localhost.my.domain (localhost [127.0.0.1]) by localhost.my.domain (8.14.4/8.14.3) with ESMTP id pANBihD4003286 for ; Wed, 23 Nov 2011 12:44:43 +0100 (CET) (envelope-from guru@unixarea.de) Received: (from guru@localhost) by localhost.my.domain (8.14.4/8.14.3/Submit) id pANBih0x003285 for freebsd-questions@freebsd.org; Wed, 23 Nov 2011 12:44:43 +0100 (CET) (envelope-from guru@unixarea.de) X-Authentication-Warning: localhost.my.domain: guru set sender to guru@unixarea.de using -f Date: Wed, 23 Nov 2011 12:44:42 +0100 From: Matthias Apitz To: freebsd-questions@freebsd.org Message-ID: <20111123114442.GA3207@tinyCurrent> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable X-Operating-System: FreeBSD 9.0-CURRENT r214444 (i386) User-Agent: Mutt/1.5.21 (2010-09-15) X-Con-Id: 51246 X-Originating-IP: 88.217.15.152 Subject: ext USB disk with garbage in GEOM_LABEL message X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Matthias Apitz List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 11:44:56 -0000 Hello, I have an external USB disk which I seldom do use, I think last time it was in June; it now has some kind of garbage in the messages on plug-in, see below the line about GEOM_LABEL: Label ... the disk itself mounts fine and all files are there; and I just wrote some GByte dumps on it; is this something to worry about, or to repair? The kernel and userland are an older 8-CURRENT from June 2008; Thanks matthias Nov 23 11:40:38 tiny root: Unknown USB device: vendor 0x07ab product 0xfc8e= bus uhub4 Nov 23 11:40:38 tiny kernel: ugen4.3: at usbus4 Nov 23 11:40:38 tiny kernel: umass1: on usbus4 Nov 23 11:40:38 tiny kernel: umass1: SCSI over Bulk-Only; quirks =3D 0x0000 Nov 23 11:40:39 tiny kernel: umass1:1:1:-1: Attached to scbus1 Nov 23 11:40:39 tiny kernel: da1 at umass-sim1 bus 1 target 0 lun 0 Nov 23 11:40:39 tiny kernel: da1: Fixed Direct= Access SCSI-2 device=20 Nov 23 11:40:39 tiny kernel: da1: 40.000MB/s transfers Nov 23 11:40:39 tiny kernel: da1: 1430799MB (2930277168 512 byte sectors: 2= 55H 63S/T 182401C) Nov 23 11:40:47 tiny kernel: GEOM_LABEL: Label for provider da1s1 is msdosf= s/=116=A3n=E6=05=B8=ABq$=CC. Nov 23 11:41:13 tiny kernel: GEOM_LABEL: Label msdosfs/=116=A3n=E6=05=B8=AB= q$=CC removed. --=20 Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e - w http://www.unixarea.de/ UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370) UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5 From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 11:46:35 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 64ABE1065670 for ; Wed, 23 Nov 2011 11:46:35 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from mx01.qsc.de (mx01.qsc.de [213.148.129.14]) by mx1.freebsd.org (Postfix) with ESMTP id 2A2378FC15 for ; Wed, 23 Nov 2011 11:46:34 +0000 (UTC) Received: from r56.edvax.de (port-92-195-104-16.dynamic.qsc.de [92.195.104.16]) by mx01.qsc.de (Postfix) with ESMTP id 904923D5E6; Wed, 23 Nov 2011 12:46:33 +0100 (CET) Received: from r56.edvax.de (localhost [127.0.0.1]) by r56.edvax.de (8.14.5/8.14.5) with SMTP id pANBkXVF002062; Wed, 23 Nov 2011 12:46:33 +0100 (CET) (envelope-from freebsd@edvax.de) Date: Wed, 23 Nov 2011 12:46:33 +0100 From: Polytropon To: ajtiM Message-Id: <20111123124633.28028a25.freebsd@edvax.de> In-Reply-To: <201111230539.21395.lumiwa@gmail.com> References: <201111230539.21395.lumiwa@gmail.com> Organization: EDVAX X-Mailer: Sylpheed 3.1.1 (GTK+ 2.24.5; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: .config X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Polytropon List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 11:46:35 -0000 On Wed, 23 Nov 2011 05:39:21 -0600, ajtiM wrote: > Hi! > > I succesfully installed FreeBSD 9.0 RC-2 and I didn't have problems with > bsdinstall and others. What I didn't have on 8.2 is when I start KDE4 with > startx I got directory .config in /. I have one .config in /home but what it > happened? When I deleted as root and I start again KDE4 as user I got it > again. Inside is a file Trolltech.conf (the same is in /home/.config). That file seems to be part of Qt. How can it be created outside your $HOME when you startx? That's somewhat strange... how _can_ that happen? % cd % touch ../bla touch: ../bla: Permission denied % touch /bla touch: /bla: Permission denied Only root permissions allow the creation of files in that specific directories. Neither /.config or /home/.config should exist. It shoud be ~/.config for your user account. I also have ~/.config/Trolltech.conf. I'm not using KDE, but one KDE program, maybe other Qt-based programs. Maybe one of them has installed the directory (at this correct location)? % ls .config/ Trolltech.conf audacious/ autostart/ gsmartcontrol/ gtk-2.0/ menus/ Okay, seems that other toolkits also use it. :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 11:48:18 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 29689106564A for ; Wed, 23 Nov 2011 11:48:18 +0000 (UTC) (envelope-from mueller6727@bellsouth.net) Received: from fmailhost05.isp.att.net (fmailhost05.isp.att.net [204.127.217.105]) by mx1.freebsd.org (Postfix) with ESMTP id 1A7A38FC13 for ; Wed, 23 Nov 2011 11:48:17 +0000 (UTC) Date: Wed, 23 Nov 2011 11:48:17 +0000 (GMT) X-Comment: Sending client does not conform to RFC822 minimum requirements X-Comment: Date has been added by Maillennium Received: from localhost (adsl-68-210-130-165.sdf.bellsouth.net[68.210.130.165]) by isp.att.net (frfwmhc05) with SMTP id <20111123114817H0500duktqe>; Wed, 23 Nov 2011 11:48:17 +0000 X-Originating-IP: [68.210.130.165] From: "Thomas Mueller" To: freebsd-questions@FreeBSD.org Message-Id: <20111123114818.29689106564A@hub.freebsd.org> Cc: Subject: man ugen error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 11:48:18 -0000 According to ugen man page, ugen can be compiled into the kernel with device ugen in config file. I tried that in the kernel config when upgrading from FreeBSD 9.0-RC1 to RC2, but the kernel build stopped quickly with the message that ugen was not valid. After removing that line from kernel config, "make kernel" was successful. I didn't find "device ugen" anywhere in the conf/NOTES or conf/GENERIC files. Tom From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 12:53:40 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C28C71065670 for ; Wed, 23 Nov 2011 12:53:40 +0000 (UTC) (envelope-from howard@leadmon.net) Received: from mail.leadmon.net (unknown [IPv6:2001:550:102:ff::b02]) by mx1.freebsd.org (Postfix) with ESMTP id 90D668FC17 for ; Wed, 23 Nov 2011 12:53:40 +0000 (UTC) Received: from HDLDESKTOP (hdl-desktop.leadmon.net [IPv6:2001:550:102:301::3]) (authenticated bits=0) by mail.leadmon.net (8.14.5/8.14.5/LNSG+SCOP+PSBL+LUBL+NJABL+SBL+DSBL+CBL+RHSBL) with ESMTP id pANCrddk079748 (version=TLSv1/SSLv3 cipher=AES128-SHA bits=128 verify=NO) for ; Wed, 23 Nov 2011 07:53:39 -0500 (EST) (envelope-from howard@leadmon.net) X-DKIM: OpenDKIM Filter v2.4.1 mail.leadmon.net pANCrddk079748 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=leadmon.net; s=default; t=1322052819; bh=jLZcarziTui9LOBQ8LKE9JUB+6jbJ0NC/logccjAQic=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type: Content-Transfer-Encoding; b=frsZ7q2t0o5jjYArnbz6EpRR1BvjgShZ90O3bp3utGIeRdwavMe90a3Saii/nrAIY X+Rd/WUHHfbLpe4h98aA7ImFAGm8hNrUFfXEwqdWz/lAQnxjsOLi0Z9gkf+b0Rtw8v TgtEhLacvTfM+exBMr7iSkv1up2xqnMlOhvmqyFg= From: "Howard Leadmon" To: Date: Wed, 23 Nov 2011 07:53:36 -0500 Message-ID: <014201cca9de$ec1429c0$c43c7d40$@leadmon.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Outlook 14.0 Thread-Index: Acyp3TyfYP7l4ukQQ0y7oq2du6n0Wg== Content-Language: en-us X-Virus-Scanned: clamav-milter 0.97.3 at vorlon.leadmon.net X-Virus-Status: Clean Subject: BIND 9.8.1-P1 with OpenSSL 1.0.0 issues.. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 12:53:40 -0000 I just ran through on one of my older FreeBSD servers, and updated from BIND 9.8.1 to 9.8.1-P1 to get the security patches for BIND online, and after doing this bind crashes. I am seeing: Nov 23 06:35:19 named[24537]: starting BIND 9.8.1-P1 -u bind -t /var/named -u bind Nov 23 06:35:19 named[24537]: built with '--localstatedir=/var' '--disable-linux-caps' '--disable-symtable' '--with-randomdev=/dev/random' '--with-openssl=/usr/local' '--with-libxml2=/usr/local' '--with-idn=/usr/local' '--with-libiconv=/usr/local' 'STD_CDEFINES=-DDIG_SIGCHASE=1' '--enable-ipv6' '--enable-threads' '--sysconfdir=/etc/namedb' '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info/' '--build=i386-portbld-freebsd6.4' 'build_alias=i386-portbld-freebsd6.4' 'CC=cc' 'CFLAGS=-O2 -fno-strict-aliasing -pipe' 'LDFLAGS= -rpath=/usr/local/lib' 'CPPFLAGS=' 'CPP=cpp' 'CXX=c++' 'CXXFLAGS=-O2 -fno-strict-aliasing -pipe' Nov 23 06:35:19 named[24537]: found 4 CPUs, using 4 worker threads Nov 23 06:35:19 named[24537]: using up to 4096 sockets Nov 23 06:35:19 named[24537]: initializing DST: openssl failure Nov 23 06:35:19 named[24537]: exiting (due to fatal error) Now as I knew my this older machine (on my hitlist to be upgraded) and the supplied OpenSSL had issues of it's own, I also installed the current OpenSSL from the ports to use, which BIND is built against. After doing the update to the -P1 version, I now find that when trying to start it dies with the above error. So I fired up my google-fu and found refrences stating I needed to get the shared libs from the OpenSSL engines directory over into the chrooted /var/named directory, so this I did: /var/named/usr: local /var/named/usr/local: lib /var/named/usr/local/lib: engines /var/named/usr/local/lib/engines: lib4758cca.so libcapi.so libgmp.so libpadlock.so libaep.so libchil.so libgost.so libsureware.so libatalla.so libcswift.so libnuron.so libubsec.so Again I tried to start named, but no love. So I tried starting it without the chroot environment, and sure enough it worked fine! As another test, I backed out the OpenSSL 1.0.0 port, and recompiled bind98 and tried starting in a chroot under the OS supplied OpenSSL 0.9.7, and that also started up just fine! So at this point, I had to run without chroot, and have a current OpenSSL which I think I may need as I am doing DNSSEC, or I can back off to the OS supplied ancient version of SSL and then have a working chroot. Not sure what is up with this, but if anyone has any hints or tips on how to resolve this issue, I would sure be thankful for the pointers. Not sure why this all of a sudden decided to break, but it was sure driving me up a wall for a bit today.. --- Howard Leadmon From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 13:19:00 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4FF86106566B for ; Wed, 23 Nov 2011 13:19:00 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp6.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id A98368FC13 for ; Wed, 23 Nov 2011 13:18:59 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pANDIq7f096092 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO) for ; Wed, 23 Nov 2011 13:18:52 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pANDIq7f096092 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1322054332; bh=KXGpQNZs3FAubzWBhJmtB03ABD7dUO69F/xsQOQZuRk=; h=Message-ID:Date:From:MIME-Version:To:Subject:References: In-Reply-To:Content-Type:Cc; b=u+Z4Gwq2o35q5TFH+xsNfi+tBkmtPZfyWeuzlNFj7A7P3M66oHtpXQjK9w6MflK/Q WlM1h+pLokwG/kg+IDD2BepPWeCKhgLpEekRFlTCeH6OxBJJjvEcypFDNSzBRkoG9n sYCr3gcEba9QLvXheprxWfY6Z4JZvFb4lNjzgpTs= Message-ID: <4ECCF2B5.3050704@infracaninophile.co.uk> Date: Wed, 23 Nov 2011 13:18:45 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <014201cca9de$ec1429c0$c43c7d40$@leadmon.net> In-Reply-To: <014201cca9de$ec1429c0$c43c7d40$@leadmon.net> X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig67AFD6838AD365DD938B5C08" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Subject: Re: BIND 9.8.1-P1 with OpenSSL 1.0.0 issues.. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 13:19:00 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig67AFD6838AD365DD938B5C08 Content-Type: multipart/mixed; boundary="------------000905050104050807060009" This is a multi-part message in MIME format. --------------000905050104050807060009 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 23/11/2011 12:53, Howard Leadmon wrote: > I just ran through on one of my older FreeBSD servers, and updated fr= om > BIND 9.8.1 to 9.8.1-P1 to get the security patches for BIND online, and= > after doing this bind crashes. >=20 > I am seeing: >=20 >=20 > Nov 23 06:35:19 named[24537]: starting BIND 9.8.1-P1 -u bind -t /var/na= med > -u bind > Nov 23 06:35:19 named[24537]: built with '--localstatedir=3D/var' > '--disable-linux-caps' '--disable-symtable' '--with-randomdev=3D/dev/ra= ndom' > '--with-openssl=3D/usr/local' '--with-libxml2=3D/usr/local' > '--with-idn=3D/usr/local' '--with-libiconv=3D/usr/local' > 'STD_CDEFINES=3D-DDIG_SIGCHASE=3D1' '--enable-ipv6' '--enable-threads' > '--sysconfdir=3D/etc/namedb' '--prefix=3D/usr' '--mandir=3D/usr/share/m= an' > '--infodir=3D/usr/share/info/' '--build=3Di386-portbld-freebsd6.4' > 'build_alias=3Di386-portbld-freebsd6.4' 'CC=3Dcc' 'CFLAGS=3D-O2 > -fno-strict-aliasing -pipe' 'LDFLAGS=3D -rpath=3D/usr/local/lib' 'CPPFL= AGS=3D' > 'CPP=3Dcpp' 'CXX=3Dc++' 'CXXFLAGS=3D-O2 -fno-strict-aliasing -pipe' > Nov 23 06:35:19 named[24537]: found 4 CPUs, using 4 worker threads > Nov 23 06:35:19 named[24537]: using up to 4096 sockets > Nov 23 06:35:19 named[24537]: initializing DST: openssl failure > Nov 23 06:35:19 named[24537]: exiting (due to fatal error) >=20 >=20 > Now as I knew my this older machine (on my hitlist to be upgraded) and = the > supplied OpenSSL had issues of it's own, I also installed the current > OpenSSL from the ports to use, which BIND is built against. After do= ing > the update to the -P1 version, I now find that when trying to start it = dies > with the above error. I've been using the attached patch with the dns/bind98 port and openssl-1.0.x from ports for months. This disables using the GOST cipher plugins -- which is no big deal as far as I'm concerned. GOST ciphers are only supplied as plugin modules unlike all other ciphers in openssl, which is a new thing with version 1.0.0 in ports. It's that libgost.so plugin shlib not playing well with chroot that apparently causes named to crash. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------000905050104050807060009 Content-Type: text/plain; x-mac-type="0"; x-mac-creator="0"; name="Makefile.diff" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Makefile.diff" --- Makefile.orig 2011-05-05 22:40:37.198878075 +0100 +++ Makefile 2011-05-05 22:46:57.116962017 +0100 @@ -209,6 +209,11 @@ ${WRKSRC}/bin/named/Makefile.in.Dist > \ ${WRKSRC}/bin/named/Makefile.in =20 +.if defined(WITH_OPENSSL_PORT) +post-configure: + ${SED} -i~ -e 's:^#define HAVE_OPENSSL_GOST.*:/* #undef HAVE_OPENSSL_GO= ST */:' ${WRKSRC}/config.h +.endif + PKGMESSAGE=3D ${.CURDIR}/../bind97/pkg-message PKGINSTALL=3D ${.CURDIR}/../bind97/pkg-install post-install: --------------000905050104050807060009-- --------------enig67AFD6838AD365DD938B5C08 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7M8rwACgkQ8Mjk52CukIw65gCeN5wnkYtsfgR6JcKMbVWzzArI IM0AnjMtRZu80isfmXILXi/cW31fQUa2 =iYw3 -----END PGP SIGNATURE----- --------------enig67AFD6838AD365DD938B5C08-- From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 13:31:18 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3F3BD106566B for ; Wed, 23 Nov 2011 13:31:18 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id 099108FC19 for ; Wed, 23 Nov 2011 13:31:17 +0000 (UTC) Received: by iakl21 with SMTP id l21so2418343iak.13 for ; Wed, 23 Nov 2011 05:31:17 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:cc:references:in-reply-to :mime-version:content-type:content-transfer-encoding:message-id; bh=UloaolY0XtOShanKVptPiEOQDQSjB5+kBmchTg7iuYU=; b=crvCQIz3os81vTpUn6rL6y/iJhtog+J+5k/LkSSjwk6qppp0hcpRHSK8rJpGboQq5a 3byNCjL//jj+EgFc1gayfA/+k/SJWTSE6i2WfP01Ct2UJpUoaMNGQ9APVWBgLxxqMu+i K5nlQcjOKybJMN2BmawM9WxiF+vHKSiEYKXS8= Received: by 10.231.24.96 with SMTP id u32mr6049146ibb.61.1322055077486; Wed, 23 Nov 2011 05:31:17 -0800 (PST) Received: from luna.wi.rr.com (cpe-184-58-138-79.wi.res.rr.com. [184.58.138.79]) by mx.google.com with ESMTPS id ai7sm41342954igc.0.2011.11.23.05.31.15 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 23 Nov 2011 05:31:15 -0800 (PST) From: ajtiM To: Polytropon Date: Wed, 23 Nov 2011 07:31:07 -0600 User-Agent: KMail/1.13.7 (FreeBSD/9.0-RC2; KDE/4.7.3; i386; ; ) References: <201111230539.21395.lumiwa@gmail.com> <20111123124633.28028a25.freebsd@edvax.de> In-Reply-To: <20111123124633.28028a25.freebsd@edvax.de> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201111230731.07527.lumiwa@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: .config X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 13:31:18 -0000 On Wednesday 23 November 2011 05:46:33 Polytropon wrote: > On Wed, 23 Nov 2011 05:39:21 -0600, ajtiM wrote: > > Hi! > > > > I succesfully installed FreeBSD 9.0 RC-2 and I didn't have problems with > > bsdinstall and others. What I didn't have on 8.2 is when I start KDE4 > > with startx I got directory .config in /. I have one .config in /home > > but what it happened? When I deleted as root and I start again KDE4 as > > user I got it again. Inside is a file Trolltech.conf (the same is in > > /home/.config). > > That file seems to be part of Qt. How can it be > created outside your $HOME when you startx? That's > somewhat strange... how _can_ that happen? > > % cd > % touch ../bla > touch: ../bla: Permission denied > % touch /bla > touch: /bla: Permission denied > > Only root permissions allow the creation of files > in that specific directories. > > Neither /.config or /home/.config should exist. > It shoud be ~/.config for your user account. > > I also have ~/.config/Trolltech.conf. I'm not using > KDE, but one KDE program, maybe other Qt-based programs. > Maybe one of them has installed the directory (at > this correct location)? > > % ls .config/ > Trolltech.conf > audacious/ > autostart/ > gsmartcontrol/ > gtk-2.0/ > menus/ > > Okay, seems that other toolkits also use it. :-) I don't know how this happened but I have it start all the time when I startx. Troltech.conf: [Qt%20Plugin%20Cache%204.7.false] usr\local\kde4\lib\kde4\plugins\kauth\backend\kauth_backend_plugin.so=40704, 0, i386 usr/local/share/qt4/mkspecs/freebsd g++-4 full-config, 201 1-11-20T16:14:25 usr\local\kde4\lib\kde4\plugins\kauth\helper\kauth_helper_plugin.so=40704, 0, i386 usr/local/share/qt4/mkspecs/freebsd g++-4 full-config, 2011- 11-20T16:14:25 Mitja -------- http://jpgmag.com/people/lumiwa From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 13:56:07 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 63540106566B for ; Wed, 23 Nov 2011 13:56:07 +0000 (UTC) (envelope-from jedwards@bsdftw.org) Received: from mail.bsdftw.org (unknown [IPv6:2001:470:c630:3000::]) by mx1.freebsd.org (Postfix) with ESMTP id 40A6A8FC12 for ; Wed, 23 Nov 2011 13:56:07 +0000 (UTC) Received: from webmail.bsdftw.org (unknown [64.253.104.155]) by mail.bsdftw.org (Postfix) with ESMTP id C669376F1; Wed, 23 Nov 2011 08:56:05 -0500 (EST) Received: from 75.149.97.29 (SquirrelMail authenticated user jedwards) by webmail.bsdftw.org with HTTP; Wed, 23 Nov 2011 08:56:06 -0500 Message-ID: In-Reply-To: <4ECCF2B5.3050704@infracaninophile.co.uk> References: <014201cca9de$ec1429c0$c43c7d40$@leadmon.net> <4ECCF2B5.3050704@infracaninophile.co.uk> Date: Wed, 23 Nov 2011 08:56:06 -0500 From: "James Edwards" To: "Matthew Seaman" User-Agent: SquirrelMail/1.4.22 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Cc: freebsd-questions@freebsd.org Subject: Re: BIND 9.8.1-P1 with OpenSSL 1.0.0 issues.. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 13:56:07 -0000 On Wed, November 23, 2011 08:18, Matthew Seaman wrote: > I've been using the attached patch with the dns/bind98 port and > openssl-1.0.x from ports for months. This disables using the GOST > cipher plugins -- which is no big deal as far as I'm concerned. GOST > ciphers are only supplied as plugin modules unlike all other ciphers in > openssl, which is a new thing with version 1.0.0 in ports. It's that > libgost.so plugin shlib not playing well with chroot that apparently > causes named to crash. > > Cheers, > > Matthew > > -- > Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard > Flat 3 > PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate > JID: matthew@infracaninophile.co.uk Kent, CT11 9PW > You, sir, are correct about the chroot. Bind 9.8.1 and OpenSSL 1.0.0 don't play nicely in a chroot environment. This also isn't limited to FreeBSD, as I experienced the problem on Solaris 10. James From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 14:01:10 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 17ED5106566B for ; Wed, 23 Nov 2011 14:01:10 +0000 (UTC) (envelope-from jerry@seibercom.net) Received: from mail-gx0-f182.google.com (mail-gx0-f182.google.com [209.85.161.182]) by mx1.freebsd.org (Postfix) with ESMTP id BE1D68FC0A for ; Wed, 23 Nov 2011 14:01:09 +0000 (UTC) Received: by ggnk5 with SMTP id k5so2002938ggn.13 for ; Wed, 23 Nov 2011 06:01:09 -0800 (PST) Received: by 10.101.186.30 with SMTP id n30mr5211821anp.98.1322056868951; Wed, 23 Nov 2011 06:01:08 -0800 (PST) Received: from scorpio.seibercom.net (cpe-076-182-104-150.nc.res.rr.com. [76.182.104.150]) by mx.google.com with ESMTPS id d5sm25107838yhl.19.2011.11.23.06.01.06 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 23 Nov 2011 06:01:07 -0800 (PST) Received: from scorpio (localhost [127.0.0.1]) (using TLSv1 with cipher DHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) (Authenticated sender: jerry@scorpio.seibercom.net) by scorpio.seibercom.net (Postfix) with ESMTPSA id 3SpQLT5TQqz2CG4m for ; Wed, 23 Nov 2011 09:01:05 -0500 (EST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.97.3 at scorpio.seibercom.net Date: Wed, 23 Nov 2011 09:01:05 -0500 From: Jerry To: FreeBSD Message-ID: <20111123090105.0891aa62@scorpio> In-Reply-To: <4ECCF2B5.3050704@infracaninophile.co.uk> References: <014201cca9de$ec1429c0$c43c7d40$@leadmon.net> <4ECCF2B5.3050704@infracaninophile.co.uk> Organization: seibercom.net X-Mailer: Claws Mail 3.7.10 (GTK+ 2.24.6; amd64-portbld-freebsd8.2) Face: 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 Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Subject: Re: BIND 9.8.1-P1 with OpenSSL 1.0.0 issues.. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: FreeBSD List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 14:01:10 -0000 On Wed, 23 Nov 2011 13:18:45 +0000 Matthew Seaman articulated: > I've been using the attached patch with the dns/bind98 port and > openssl-1.0.x from ports for months. This disables using the GOST > cipher plugins -- which is no big deal as far as I'm concerned. GOST > ciphers are only supplied as plugin modules unlike all other ciphers > in openssl, which is a new thing with version 1.0.0 in ports. It's > that libgost.so plugin shlib not playing well with chroot that > apparently causes named to crash. Mathew, has anyone filed a PR either here or upstream regarding this phenomena? -- Jerry â™” Disclaimer: off-list followups get on-list replies or get ignored. Please do not ignore the Reply-To header. __________________________________________________________________ From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 15:27:42 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 15C5B1065670 for ; Wed, 23 Nov 2011 15:27:42 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp6.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id 9B5108FC14 for ; Wed, 23 Nov 2011 15:27:41 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pANFRa11097837 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO) for ; Wed, 23 Nov 2011 15:27:37 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pANFRa11097837 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1322062057; bh=sLVLP6p0LVsZS0+HUE3Dss/vi2k3dE7zdj9ngzqkSFU=; h=Message-ID:Date:From:MIME-Version:To:Subject:References: In-Reply-To:Content-Type:Cc; b=iQDfGdgJlHA8tmkll26rXBaM2+k2TbdyIXvxlBhkfTvAae2qd76aSohgdn9Ls6UuD ScPeE3qZV+JWJnybVuOnMSeOY7biOnaHvD1+u43MEV3JUJSUJItqTklsrqAmQHpTdv EdgPacoc/izGIvUio2QoEklinh37MRKiFnYMutZo= Message-ID: <4ECD10E1.7040803@infracaninophile.co.uk> Date: Wed, 23 Nov 2011 15:27:29 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <014201cca9de$ec1429c0$c43c7d40$@leadmon.net> <4ECCF2B5.3050704@infracaninophile.co.uk> <20111123090105.0891aa62@scorpio> In-Reply-To: <20111123090105.0891aa62@scorpio> X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enigAB469A8371352D888EFD3114" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Subject: Re: BIND 9.8.1-P1 with OpenSSL 1.0.0 issues.. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 15:27:42 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enigAB469A8371352D888EFD3114 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable On 23/11/2011 14:01, Jerry wrote: > On Wed, 23 Nov 2011 13:18:45 +0000 > Matthew Seaman articulated: >=20 >> I've been using the attached patch with the dns/bind98 port and >> openssl-1.0.x from ports for months. This disables using the GOST >> cipher plugins -- which is no big deal as far as I'm concerned. GOST >> ciphers are only supplied as plugin modules unlike all other ciphers >> in openssl, which is a new thing with version 1.0.0 in ports. It's >> that libgost.so plugin shlib not playing well with chroot that >> apparently causes named to crash. >=20 > Mathew, has anyone filed a PR either here or upstream regarding this > phenomena? I sent my patch to Doug Barton (bind maintainer in src/ports) but he didn't accept it. Discussions I've seen around this are that the OpenSSL guys say that it's not a bug from their side, and that bind is doing it wrong. I believe the ISC guys are aware but I don't know if they have a fix in the works or not. Possibly some advanced combination of LDFLAGS at compile-time might sort things, but I really have no idea.= Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------enigAB469A8371352D888EFD3114 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7NEOgACgkQ8Mjk52CukIxCQgCglVFu1SWavRG+j0vuPCdCrx9K YgcAniw9yWVMlctp9qpaMV3hT2Utstq/ =oGWB -----END PGP SIGNATURE----- --------------enigAB469A8371352D888EFD3114-- From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 16:27:25 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 70FD2106566B for ; Wed, 23 Nov 2011 16:27:25 +0000 (UTC) (envelope-from web@umich.edu) Received: from hackers.mr.itd.umich.edu (smtp.mail.umich.edu [141.211.14.81]) by mx1.freebsd.org (Postfix) with ESMTP id 2C6A38FC0C for ; Wed, 23 Nov 2011 16:27:24 +0000 (UTC) Received: FROM itcom245.staff.itd.umich.edu (itcom245.staff.itd.umich.edu [141.213.135.249]) By hackers.mr.itd.umich.edu ID 4ECD1EEB.6EFBF.31695 ; Authuser web; 23 Nov 2011 11:27:23 EST Date: Wed, 23 Nov 2011 11:27:23 -0500 From: William Bulley To: Ian Smith Message-ID: <20111123162723.GA29700@itcom245.staff.itd.umich.edu> Mail-Followup-To: Ian Smith , freebsd-questions@freebsd.org, Edward Martinez Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i Cc: freebsd-questions@freebsd.org, Edward Martinez Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 16:27:25 -0000 According to Ian Smith on Tue, 11/22/11 at 23:48: > > Sorry William, this arrived not long after I crashed, 18-hour odd time > difference .. I've since seen Frank Shute advise how to csup from 8.2-S > to RELENG_9_0 and in your case that's likely the easiest way to go. Sorry about the time difference - not much I can do about that... :-) > As you see, you got exactly the same error I got with BETA1, and for the > same reason - bsdinstall isn't running newfs on your existing partitions > before trying to extract the distribution. I thought that was going to > be fixed before release, but clearly not yet. It really needs the newfs > toggle option of sysinstall/sade before it'll be useful as sysinstall. > > The docs are very much a work in progress. Even sysinstall requires you > to at least enter the mountpoints for your existing partitions (within a > slice); they're needed for install and of course to build /etc/fstab. > > In my case, wanting to preserve /home, seems I'll have to NOT supply a > mountpoint for that partition in order for it to be left alone, and then > add it into fstab afterwards, probably having to merge any newly created > user there from /usr/home, revert the symlink etc. Messy. > > Did you try running sysinstall (or sade), just to do the slicing + > partitioning / newfs'ing from Live CD mode, only on DVD1 I guess? > > In your case I think a source upgrade and building is probably the way > to go. In my case, my 8.2 is on another slice (s4), but I want 9.0 on > s2, over an existing 7.4-RELEASE, because that slice has enough space > for a decent ongoing 9.x system, and because I'd hoped to contribute to > debugging bsdinstall - but then I moved and had no net access for nearly > a month. Still, I'm persisting with that plan and I'll keep hassling > until this regression in functionality is fixed, for 9.1 now I guess. The third time is the charm! I was successful (and am now running 9.0-PRERELEASE!) with the upgrade of this older Dell laptop. The first (failed attempt) was from 8.2-S to 9.x anything (turned out to be RC1 at the time). This was a source upgrade (csup/buildworld/installworld) but failed during the compilation of the kernel. At this point I decided to just grab the DVD1 and install over my 8.2-S since I was not invested in anything on the disk (although I had csup'd the ports tree and was running Xorg successfully at that point). The DVD1 ISO install of 9.0-RC1 was unsuccessful due to the oddness of the bsdinstall program as you describe above. At about this time RC1 was transitioning to RC2, so I decided to grab the bootonly RC2 ISO and yesterday ran into the same bsdinstall issues. So I was forced to try the source upgrade again, hoping that by this time the kernel compilation problem had been fixed. Well, evidently it was, because the csup/buildworld/installworld method worked like a charm and I am now happily running 9.0-PRERELEASE. Thanks for all the replies and suggestions. I am going to try to avoid using bsdinstall like the plague and I advise others to do likewise, at least until it becomes more mature. It seems to me that the inclusion of the bsdinstall program as the default installer in 9.0 is illadvised at best. Regards, web... -- William Bulley Email: web@umich.edu 72 characters width template ----------------------------------------->| From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 16:34:09 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 049D6106566C for ; Wed, 23 Nov 2011 16:34:09 +0000 (UTC) (envelope-from web@umich.edu) Received: from hackers.mr.itd.umich.edu (smtp.mail.umich.edu [141.211.14.81]) by mx1.freebsd.org (Postfix) with ESMTP id B686C8FC17 for ; Wed, 23 Nov 2011 16:34:08 +0000 (UTC) Received: FROM itcom245.staff.itd.umich.edu (itcom245.staff.itd.umich.edu [141.213.135.249]) By hackers.mr.itd.umich.edu ID 4ECD207F.6D755.7085 ; Authuser web; 23 Nov 2011 11:34:07 EST Date: Wed, 23 Nov 2011 11:34:07 -0500 From: William Bulley To: "Galati, Michael" Message-ID: <20111123163407.GB29700@itcom245.staff.itd.umich.edu> Mail-Followup-To: "Galati, Michael" , freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i Cc: freebsd-questions@freebsd.org Subject: Re: freebsd-questions Digest, Vol 390, Issue 3 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 16:34:09 -0000 According to "Galati, Michael" on Wed, 11/23/11 at 00:40: > > If you still have trouble compiling, you could always do a fresh > install off one of the 9.0-RC2 images on a spare machine (or on > virtual machine; VirtualBox works well for this), and build the > sources there. Once the make build{world,kernel} steps complete, copy > (or export over NFS) /usr/{src,obj} to the machine to be upgraded, and > do the usual make install{kernel,world} (and mergemaster) steps. > > I just did this just yesterday to bring a test box up from stable/8 to > stable/9; worked like a charm. YMMV. > > Apparently freebsd-update(8) works for binary updates as well, but > I've never used it (check the release announcement on freebsd-current > or freebsd-stable from the 17th). > > Good luck! ^_^' Thanks. I am now happily running 9.0-PRERELEASE (!) and finally past all those weird bsdinstall issues. What a mess! Thanks for all the replies and help. I didn't use anything other than what I view as the "standard" (t/m) way to upgrade: csup-of-stable/buildworld/installworld which method has always worked in the past for me, but had trouble in the attempt to upgrade to a 9.x variant before it was ready for prime time. I would not normally have done this, but there were extenuating circumstances that required the attempt. Thanks again. :-) Regards, web... -- William Bulley Email: web@umich.edu 72 characters width template ----------------------------------------->| From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 18:07:04 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BD972106566C for ; Wed, 23 Nov 2011 18:07:04 +0000 (UTC) (envelope-from edwinlculp@gmail.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 4C2CB8FC13 for ; Wed, 23 Nov 2011 18:07:04 +0000 (UTC) Received: by faap15 with SMTP id p15so2871406faa.13 for ; Wed, 23 Nov 2011 10:07:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type:content-transfer-encoding; bh=WFGvDpAZ0NaHlQ1ItVGElnggrAq9FLv2M+xAvy1+z1Q=; b=q2hqcxQIbG8q+FEkP2Jh6ptMJ1znw/6Zd2uGAiZRSe4ymVXuSB8Sveb6cw002P3CLR YbU0fejYo0Zb7AYd0+MWXSG0OkyJ+hGOvxSO2VMcw5Fh0eCWiGFqbJZPCHM65mWOT40Z HtWpDMxhirhLtj5PU/M846Rgj9drIyZhLPISI= MIME-Version: 1.0 Received: by 10.205.128.19 with SMTP id hc19mr25520867bkc.9.1322070204258; Wed, 23 Nov 2011 09:43:24 -0800 (PST) Received: by 10.204.37.207 with HTTP; Wed, 23 Nov 2011 09:43:24 -0800 (PST) In-Reply-To: <20111123162723.GA29700@itcom245.staff.itd.umich.edu> References: <20111123162723.GA29700@itcom245.staff.itd.umich.edu> Date: Wed, 23 Nov 2011 11:43:24 -0600 Message-ID: From: "Edwin L. Culp W." To: Ian Smith , freebsd-questions@freebsd.org, Edward Martinez Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: Subject: Re: where to ask about problems with bsdinstall in 9.0RC2? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 18:07:04 -0000 On Wed, Nov 23, 2011 at 10:27 AM, William Bulley wrote: > According to Ian Smith on Tue, 11/22/11 at 23:48: >> >> Sorry William, this arrived not long after I crashed, 18-hour odd time >> difference .. I've since seen Frank Shute advise how to csup from 8.2-S >> to RELENG_9_0 and in your case that's likely the easiest way to go. > > Sorry about the time difference - not much I can do about that... =A0:-) > >> As you see, you got exactly the same error I got with BETA1, and for the >> same reason - bsdinstall isn't running newfs on your existing partitions >> before trying to extract the distribution. =A0I thought that was going t= o >> be fixed before release, but clearly not yet. =A0It really needs the new= fs >> toggle option of sysinstall/sade before it'll be useful as sysinstall. >> >> The docs are very much a work in progress. =A0Even sysinstall requires y= ou >> to at least enter the mountpoints for your existing partitions (within a >> slice); they're needed for install and of course to build /etc/fstab. >> >> In my case, wanting to preserve /home, seems I'll have to NOT supply a >> mountpoint for that partition in order for it to be left alone, and then >> add it into fstab afterwards, probably having to merge any newly created >> user there from /usr/home, revert the symlink etc. =A0Messy. >> >> Did you try running sysinstall (or sade), just to do the slicing + >> partitioning / newfs'ing from Live CD mode, only on DVD1 I guess? >> >> In your case I think a source upgrade and building is probably the way >> to go. =A0In my case, my 8.2 is on another slice (s4), but I want 9.0 on >> s2, over an existing 7.4-RELEASE, because that slice has enough space >> for a decent ongoing 9.x system, and because I'd hoped to contribute to >> debugging bsdinstall - but then I moved and had no net access for nearly >> a month. =A0Still, I'm persisting with that plan and I'll keep hassling >> until this regression in functionality is fixed, for 9.1 now I guess. > > The third time is the charm! > > I was successful (and am now running 9.0-PRERELEASE!) with the upgrade > of this older Dell laptop. =A0The first (failed attempt) was from 8.2-S > to 9.x anything (turned out to be RC1 at the time). =A0This was a source > upgrade (csup/buildworld/installworld) but failed during the compilation > of the kernel. > > At this point I decided to just grab the DVD1 and install over my 8.2-S > since I was not invested in anything on the disk (although I had csup'd > the ports tree and was running Xorg successfully at that point). =A0The > DVD1 ISO install of 9.0-RC1 was unsuccessful due to the oddness of the > bsdinstall program as you describe above. > > At about this time RC1 was transitioning to RC2, so I decided to grab the > bootonly RC2 ISO and yesterday ran into the same bsdinstall issues. =A0So > I was forced to try the source upgrade again, hoping that by this time > the kernel compilation problem had been fixed. > > Well, evidently it was, because the csup/buildworld/installworld method > worked like a charm and I am now happily running 9.0-PRERELEASE. =A0Thank= s > for all the replies and suggestions. =A0I am going to try to avoid using > bsdinstall like the plague and I advise others to do likewise, at least > until it becomes more mature. =A0It seems to me that the inclusion of the > bsdinstall program as the default installer in 9.0 is illadvised at best. > Amen. I share that opinion. I have never had problems or even been confused with the old installer and have used it since the beginning. I have heard that pcBSD has a great new graphic installer and thought it was going to be included in releng_9 but it seems as though it isn't. I understand that you can use it for FreeBSD through the pcBSD dvd but haven't looked at it. If anyone likes it and has a link to some basic docs, it would be great if you would share them. If not, I personally prefer the old one as an option, if possible. ed > Regards, > > web... > > -- > William Bulley =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 Email: web@umich.e= du > > 72 characters width template ----------------------------------------->| > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" > From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 20:11:50 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9909A106566C; Wed, 23 Nov 2011 20:11:50 +0000 (UTC) (envelope-from villa.alberto@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id EA3868FC0A; Wed, 23 Nov 2011 20:11:49 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so2659165bkb.13 for ; Wed, 23 Nov 2011 12:11:48 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=sender:from:organization:to:subject:date:user-agent:cc:references :in-reply-to:mime-version:content-type:content-transfer-encoding :message-id; bh=qy8QldMmoJZQNxKKCSjx2tCqqt+5o88MqMZONOrdLEY=; b=mr8faGdrMKpFzOWYerpGHBPTfcbGc5nDljXRvE3z3bWvNPkHGXyFvfjT1Aa+2fUTKd 43GjbVmzx08CAT0zz3VBVDo/dZ/fcwXPOAgWvbYNxE4hm7SxyJGnVz8He9H0UGYpNJKo 9/JS1FU/OU+DWFEwLTZLYx/jZwhKzqOmuwRIk= Received: by 10.204.130.90 with SMTP id r26mr26147092bks.46.1322077525249; Wed, 23 Nov 2011 11:45:25 -0800 (PST) Received: from woodstock.peanuts (host214-68-dynamic.45-79-r.retail.telecomitalia.it. [79.45.68.214]) by mx.google.com with ESMTPS id x14sm13788071bkf.10.2011.11.23.11.45.23 (version=SSLv3 cipher=OTHER); Wed, 23 Nov 2011 11:45:24 -0800 (PST) Sender: Alberto Villa From: Alberto Villa Organization: The FreeBSD Project To: freebsd-ports@freebsd.org Date: Wed, 23 Nov 2011 20:45:22 +0100 User-Agent: KMail/1.13.7 (FreeBSD/9.0-RC2; KDE/4.7.3; amd64; ; ) References: <4EC98563.7010206@rawbw.com> In-Reply-To: <4EC98563.7010206@rawbw.com> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart14530476.XfRk8rQS1G"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <201111232045.23022.avilla@freebsd.org> Cc: ports@freebsd.org, Yuri , FreeBSD Questions , sylvio@freebsd.org Subject: Re: linphone-base conflicts with ortp and fails to install, it also fails to build: error: expected specifier-qualifier-list before 'UInt96' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 20:11:50 -0000 --nextPart14530476.XfRk8rQS1G Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable On Sunday 20 November 2011 23:55:31 Yuri wrote: > When I do portupgrade, I get this message (kdenetwork fails to update > due to this): >=20 > =3D=3D=3D> linphone-base-3.2.1_1,1 conflicts with installed package(s): = ^M > ortp-0.13.0_1^M =46ix committed: ortp dependency has been replaced by linphone-base.=20 Please, update (and check UPDATING). =2D-=20 Alberto Villa, FreeBSD committer http://people.FreeBSD.org/~avilla Nothing is rich but the inexhaustible wealth of nature. She shows us only surfaces, but she is a million fathoms deep. -- Ralph Waldo Emerson --nextPart14530476.XfRk8rQS1G Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (FreeBSD) iJwEAAECAAYFAk7NTVIACgkQ3xiC6kQ1CosCcAQAnAccCZXqjIluSh8BDES323a5 OO8pegNQXr6U+dwtqy6pC96q8WcPFDQiTqupqOeJodz7Yh/Iu6xkuOwGCA5cX06O Yi63oE4JWhLE3eHLZ/aiXAfJWWZwnHJcz567JP6VTo/Zomcdwkl/nnOE6CeD0OWw Rx0CVJCURMPBzSI05jo= =kjcv -----END PGP SIGNATURE----- --nextPart14530476.XfRk8rQS1G-- From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 20:34:56 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E442F1065678; Wed, 23 Nov 2011 20:34:56 +0000 (UTC) (envelope-from yuri@rawbw.com) Received: from shell0.rawbw.com (shell0.rawbw.com [198.144.192.45]) by mx1.freebsd.org (Postfix) with ESMTP id B27988FC1C; Wed, 23 Nov 2011 20:34:56 +0000 (UTC) Received: from eagle.yuri.org (stunnel@localhost [127.0.0.1]) (authenticated bits=0) by shell0.rawbw.com (8.14.4/8.14.4) with ESMTP id pANKYtg5076908; Wed, 23 Nov 2011 12:34:56 -0800 (PST) (envelope-from yuri@rawbw.com) Message-ID: <4ECD58EF.2000206@rawbw.com> Date: Wed, 23 Nov 2011 12:34:55 -0800 From: Yuri User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:8.0) Gecko/20111117 Thunderbird/8.0 MIME-Version: 1.0 To: Alberto Villa References: <4EC98563.7010206@rawbw.com> <201111232045.23022.avilla@freebsd.org> In-Reply-To: <201111232045.23022.avilla@freebsd.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: ports@freebsd.org, sylvio@freebsd.org, FreeBSD Questions , freebsd-ports@freebsd.org Subject: Re: linphone-base conflicts with ortp and fails to install, it also fails to build: error: expected specifier-qualifier-list before 'UInt96' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 20:34:57 -0000 On 11/23/2011 11:45, Alberto Villa wrote: > Fix committed: ortp dependency has been replaced by linphone-base. > Please, update (and check UPDATING). I updated via cvsup (*default release=cvs tag=.) but I don't see the relevant ports UPDATING record. The only recent record there is 20111123 and it is related to databases/redis. Yuri From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 20:45:18 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9038D106564A for ; Wed, 23 Nov 2011 20:45:18 +0000 (UTC) (envelope-from traveling08@cox.net) Received: from fed1rmfepi106.cox.net (fed1rmfepi106.cox.net [68.230.241.137]) by mx1.freebsd.org (Postfix) with ESMTP id 6B7B88FC14 for ; Wed, 23 Nov 2011 20:45:18 +0000 (UTC) Received: from fed1rmimpo305.cox.net ([68.230.241.173]) by fed1rmfepo203.cox.net (InterMail vM.8.01.04.00 201-2260-137-20101110) with ESMTP id <20111123203353.HUED3756.fed1rmfepo203.cox.net@fed1rmimpo305.cox.net> for ; Wed, 23 Nov 2011 15:33:53 -0500 Received: from dell64 ([72.220.91.219]) by fed1rmimpo305.cox.net with bizsmtp id 0kZt1i0064jy6EY03kZtBz; Wed, 23 Nov 2011 15:33:53 -0500 X-CT-Class: Clean X-CT-Score: 0.00 X-CT-RefID: str=0001.0A020209.4ECD58B1.00A1,ss=1,re=0.000,fgs=0 X-CT-Spam: 0 X-Authority-Analysis: v=1.1 cv=Mm7wCnmhIH1F3xzFnZSx5GfOfjmr4St7hCElUMct5Xs= c=1 sm=1 a=mTOLj5AyYbQA:10 a=G8Uczd0VNMoA:10 a=kj9zAlcOel0A:10 a=olICo1sKaMXbpqbYUd6B5g==:17 a=ge07ekuDrkviXEmKi8kA:9 a=B3EEpVuHpgEz-lzggUYA:7 a=CjuIK1q_8ugA:10 a=olICo1sKaMXbpqbYUd6B5g==:117 X-CM-Score: 0.00 Authentication-Results: cox.net; none Date: Wed, 23 Nov 2011 12:33:47 -0800 From: Robert To: freebsd-questions@freebsd.org Message-ID: <20111123123347.4f439c9c@dell64> X-Mailer: Claws Mail 3.7.10 (GTK+ 2.24.6; amd64-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Invalid fdisk partition table found X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 20:45:18 -0000 Greetings [robert@dell64] ~> uname -a FreeBSD dell64.shasta204.local 8.2-STABLE FreeBSD 8.2-STABLE #34: Fri Nov 18 06:43:01 PST 2011 root@dell64.shasta204.local:/usr/obj/usr/src/sys/GENERIC amd64 I have two Lexar Professional 600X 16GB compact flash cards that are unusable. fdisk shows: [robert@dell64] ~> fdisk /dev/da1 ******* Working on device /dev/da1 ******* parameters extracted from in-core disklabel are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) parameters to be used for BIOS calculations are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) fdisk: invalid fdisk partition table found Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 32, size 59360 (28 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 28/ head 63/ sector 32 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: It shows only 28 MB instead of 16GB. I have tried to change the type from 165 (FreeBSD) to msdosfs types 6 11 or 12 using fdisk -u and fdisk -i and also "sade". I do not get and error but when finished it still shows the same data. I have tried to zero it out using " dd if=/dev/zero of=/dev/da1 bs=1m and nothing changes. I have tried different block sizes and counts to no avail. Is there any way I can restore these CF cards to 16GB? Any help or suggestions will be greatly appreciated. TIA Robert RobertRobert From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 21:08:38 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7147C1065675 for ; Wed, 23 Nov 2011 21:08:38 +0000 (UTC) (envelope-from jhs@berklix.com) Received: from tower.berklix.org (tower.berklix.org [83.236.223.114]) by mx1.freebsd.org (Postfix) with ESMTP id D44C38FC14 for ; Wed, 23 Nov 2011 21:08:37 +0000 (UTC) Received: from mart.js.berklix.net (p57BCF8C3.dip.t-dialin.net [87.188.248.195]) (authenticated bits=0) by tower.berklix.org (8.14.2/8.14.2) with ESMTP id pANL8OXc074400; Wed, 23 Nov 2011 21:08:24 GMT (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (fire.js.berklix.net [192.168.91.41]) by mart.js.berklix.net (8.14.3/8.14.3) with ESMTP id pANL8CPS047349; Wed, 23 Nov 2011 22:08:12 +0100 (CET) (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (localhost [127.0.0.1]) by fire.js.berklix.net (8.14.4/8.14.4) with ESMTP id pANL80g3041149; Wed, 23 Nov 2011 21:08:06 GMT (envelope-from jhs@fire.js.berklix.net) Message-Id: <201111232108.pANL80g3041149@fire.js.berklix.net> To: Robert From: "Julian H. Stacey" Organization: http://www.berklix.com BSD Unix Linux Consultancy, Munich Germany User-agent: EXMH on FreeBSD http://www.berklix.com/free/ X-URL: http://www.berklix.com In-reply-to: Your message "Wed, 23 Nov 2011 12:33:47 PST." <20111123123347.4f439c9c@dell64> Date: Wed, 23 Nov 2011 22:08:00 +0100 Sender: jhs@berklix.com Cc: "freebsd-questions@freebsd.org" Subject: Re: Invalid fdisk partition table found X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 21:08:38 -0000 Robert wrote: > Greetings > > [robert@dell64] ~> uname -a > FreeBSD dell64.shasta204.local 8.2-STABLE FreeBSD 8.2-STABLE #34: Fri > Nov 18 06:43:01 PST 2011 > root@dell64.shasta204.local:/usr/obj/usr/src/sys/GENERIC amd64 > > I have two Lexar Professional 600X 16GB compact flash cards that are > unusable. fdisk shows: > > [robert@dell64] ~> fdisk /dev/da1 > ******* Working on device /dev/da1 ******* > parameters extracted from in-core disklabel are: > cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) > > parameters to be used for BIOS calculations are: > cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) > > fdisk: invalid fdisk partition table found > Media sector size is 512 > Warning: BIOS sector numbering starts with sector 1 > Information from DOS bootblock is: > The data for partition 1 is: > sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > start 32, size 59360 (28 Meg), flag 80 (active) > beg: cyl 0/ head 1/ sector 1; > end: cyl 28/ head 63/ sector 32 > The data for partition 2 is: > > The data for partition 3 is: > > The data for partition 4 is: > > > It shows only 28 MB instead of 16GB. I have tried to change the type > from 165 (FreeBSD) to msdosfs types 6 11 or 12 using fdisk -u and fdisk > -i and also "sade". I do not get and error but when finished it still > shows the same data. > > I have tried to zero it out using " dd if=/dev/zero of=/dev/da1 bs=1m > and nothing changes. I have tried different block sizes and counts to > no avail. > > Is there any way I can restore these CF cards to 16GB? Any help or > suggestions will be greatly appreciated. @ suggestions: 1 Try bsdlabel -B -w -r /dev/da1 echo unplug, reinsert newfs /dev/da1a 2 Base of _my_ man fdisk " When running multi user, you cannot write unless you first run this: sysctl kern.geom.debugflags=16 " It looks like I never got round to sending in a send-pr for that, so feel free looks like its been that way at ;east since 7.1.see http://berklix.com/~jhs/src/bsd/fixes/FreeBSD/src/gen/sbin/fdisk/ Cheers, Julian -- Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com Reply below not above, cumulative like a play script, & indent with "> ". Format: Plain text. Not HTML, multipart/alternative, base64, quoted-printable. From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 21:53:42 2011 Return-Path: Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1D3DD106564A for ; Wed, 23 Nov 2011 21:53:42 +0000 (UTC) (envelope-from frank.eybsen@gmail.com) Received: from mail-vw0-f54.google.com (mail-vw0-f54.google.com [209.85.212.54]) by mx1.freebsd.org (Postfix) with ESMTP id CA7448FC0C for ; Wed, 23 Nov 2011 21:53:41 +0000 (UTC) Received: by vbbfa15 with SMTP id fa15so2677826vbb.13 for ; Wed, 23 Nov 2011 13:53:41 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:sender:date:x-google-sender-auth:message-id:subject :from:to:content-type; bh=/fuOTIEHlSbzYwPCNYp4vUJvPr6E5P3XJLx55bXF1Hw=; b=eepPNb5UP+ojnkjnaqMZv+gTiVs55d8c8JrScVPxzIwWEf0f9KFxfglUtJtgaD0aRc T4swvl6Ggm+cUjgoppAO2ImhAZACAhtKAAqFZylbyLHpAAqLxO4TppZOxr3ygoeJFgzb if1FjihSS6etNYikuP62JcVMxbgI4rtGN2P58= MIME-Version: 1.0 Received: by 10.182.110.1 with SMTP id hw1mr9072480obb.38.1322083473319; Wed, 23 Nov 2011 13:24:33 -0800 (PST) Sender: frank.eybsen@gmail.com Received: by 10.182.109.98 with HTTP; Wed, 23 Nov 2011 13:24:33 -0800 (PST) Date: Wed, 23 Nov 2011 13:24:33 -0800 X-Google-Sender-Auth: vQxHuenr85vnU0pzhmj0Ly0p6_A Message-ID: From: Frank To: freebsd-questions@FreeBSD.org Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Free BSD Website Question X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 21:53:42 -0000 Hey FreeBSD, I saw that you had a list of web hosting providers on your website and wondered if you would consider adding WebHosting.net to your list. http://www.freebsd.org/commercial/isp.html We have been around since 1998 and focus on more advanced hosting needs like cloud hosting, exchange hosting, and dedicated servers. We have recently launched a new version of our site and are also doing a bit of a push to have more people try our service. If you would consider adding us to your list we would be incredibly grateful and please let me know if you=92d like any more information about WebHosting.net. -Frank Anderson *webhosting.net* reliable. scalable. secure. From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 22:39:46 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A07B3106566B for ; Wed, 23 Nov 2011 22:39:46 +0000 (UTC) (envelope-from juvix88@gmail.com) Received: from mail-ww0-f50.google.com (mail-ww0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id 339CF8FC0C for ; Wed, 23 Nov 2011 22:39:45 +0000 (UTC) Received: by wwg14 with SMTP id 14so3123658wwg.31 for ; Wed, 23 Nov 2011 14:39:45 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=MdeJVrgLDA5kX21cjhIUT4QkciWmwY5EeuaoKRGRbVo=; b=XnEo8Tcg3yC1UvS6YFR8TYTcfQpALNQEFrKnRLS6LESyjBV8XEU1JAAwbpDUO+3M89 hOpPjMxh3fv99isneDB/FBn5KRQ+NtYgZnW1JcrwWJbrVIys+NXiGoMBlMSCO1e1F3gu Q2eDpp45Du3faIySE/dfdrnAEvtWx4SwcZSK4= MIME-Version: 1.0 Received: by 10.180.85.161 with SMTP id i1mr26538602wiz.17.1322087984395; Wed, 23 Nov 2011 14:39:44 -0800 (PST) Received: by 10.180.104.197 with HTTP; Wed, 23 Nov 2011 14:39:44 -0800 (PST) Received: by 10.180.104.197 with HTTP; Wed, 23 Nov 2011 14:39:44 -0800 (PST) In-Reply-To: References: Date: Wed, 23 Nov 2011 17:39:44 -0500 Message-ID: From: Jonathan Vomacka To: Frank Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: Free BSD Website Question X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 22:39:46 -0000 Absolutely not On Nov 23, 2011 4:54 PM, "Frank" wrote: > Hey FreeBSD, > > I saw that you had a list of web hosting providers on your website and > wondered if you would consider adding WebHosting.net to your list. > http://www.freebsd.org/commercial/isp.html > > We have been around since 1998 and focus on more advanced hosting needs > like cloud hosting, exchange hosting, and dedicated servers. We have > recently launched a new version of our site and are also doing a bit of a > push to have more people try our service. > > If you would consider adding us to your list we would be incredibly > grateful and please let me know if you=92d like any more information abou= t > WebHosting.net. > > -Frank Anderson > *webhosting.net* > reliable. scalable. secure. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 22:53:45 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EB39F106566B for ; Wed, 23 Nov 2011 22:53:45 +0000 (UTC) (envelope-from carlj@peak.org) Received: from redcondor2.peak.org (redcondor2.peak.org [69.59.192.56]) by mx1.freebsd.org (Postfix) with ESMTP id BFA948FC0A for ; Wed, 23 Nov 2011 22:53:45 +0000 (UTC) Received: from zmail-mta01.peak.org ([207.55.16.111]) by redcondor2.peak.org ({6c724cae-de34-4c5f-b615-3072b86419fa}) via TCP (outbound) with ESMTP id 20111123225344978 for ; Wed, 23 Nov 2011 22:53:44 +0000 X-RC-FROM: X-RC-RCPT: Received: from maple.localnet (unknown [207.55.106.132]) by zmail-mta01.peak.org (Postfix) with ESMTPSA id 9A702491A4E for ; Wed, 23 Nov 2011 14:53:44 -0800 (PST) Received: from oak.localnet (oak.localnet [IPv6:2001:1938:266::6f:616b]) by maple.localnet (Postfix) with ESMTP id 37B2561F71 for ; Wed, 23 Nov 2011 14:53:42 -0800 (PST) Received: from oak.localnet (localhost.localnet [127.0.0.1]) by oak.localnet (Postfix) with ESMTP id E4A00C3A9 for ; Wed, 23 Nov 2011 14:53:41 -0800 (PST) Received: (from carlj@localhost) by oak.localnet (8.14.4/8.14.4/Submit) id pANMrfij055484; Wed, 23 Nov 2011 14:53:41 -0800 (PST) (envelope-from carlj@peak.org) X-Authentication-Warning: oak.localnet: carlj set sender to carlj@peak.org using -f From: Carl Johnson To: freebsd-questions@freebsd.org References: <201111232108.pANL80g3041149@fire.js.berklix.net> Mail-Followup-To: freebsd-questions@freebsd.org Date: Wed, 23 Nov 2011 14:53:41 -0800 In-Reply-To: <201111232108.pANL80g3041149@fire.js.berklix.net> (Julian H. Stacey's message of "Wed, 23 Nov 2011 22:08:00 +0100") Message-ID: <87bos2e9hm.fsf@oak.localnet> User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/23.2 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: Re: Invalid fdisk partition table found X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 22:53:46 -0000 "Julian H. Stacey" writes: > > @ suggestions: > 1 Try > bsdlabel -B -w -r /dev/da1 > echo unplug, reinsert > newfs /dev/da1a > > 2 Base of _my_ man fdisk > " When running multi user, you cannot write unless you first run this: > sysctl kern.geom.debugflags=16 > " > > It looks like I never got round to sending in a send-pr for that, so feel free > looks like its been that way at least since 7.1.see > http://berklix.com/~jhs/src/bsd/fixes/FreeBSD/src/gen/sbin/fdisk/ I thought I had seen a mention of that somewhere, so I grep'ed the man pages. I found hints on geom(4) and boot0cfg(8), but they certainly aren't obvious. -- Carl Johnson carlj@peak.org From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 22:56:17 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 518F1106566B for ; Wed, 23 Nov 2011 22:56:17 +0000 (UTC) (envelope-from jhs@berklix.com) Received: from tower.berklix.org (tower.berklix.org [83.236.223.114]) by mx1.freebsd.org (Postfix) with ESMTP id BBCAA8FC13 for ; Wed, 23 Nov 2011 22:56:16 +0000 (UTC) Received: from mart.js.berklix.net (p57BCF6AA.dip.t-dialin.net [87.188.246.170]) (authenticated bits=0) by tower.berklix.org (8.14.2/8.14.2) with ESMTP id pANMuEQ3074958; Wed, 23 Nov 2011 22:56:15 GMT (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (fire.js.berklix.net [192.168.91.41]) by mart.js.berklix.net (8.14.3/8.14.3) with ESMTP id pANMu2ua047887; Wed, 23 Nov 2011 23:56:02 +0100 (CET) (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (localhost [127.0.0.1]) by fire.js.berklix.net (8.14.4/8.14.4) with ESMTP id pANMtiLd042836; Wed, 23 Nov 2011 22:55:50 GMT (envelope-from jhs@fire.js.berklix.net) Message-Id: <201111232255.pANMtiLd042836@fire.js.berklix.net> To: Jonathan Vomacka From: "Julian H. Stacey" Organization: http://www.berklix.com BSD Unix Linux Consultancy, Munich Germany User-agent: EXMH on FreeBSD http://www.berklix.com/free/ X-URL: http://www.berklix.com In-reply-to: Your message "Wed, 23 Nov 2011 17:39:44 EST." Date: Wed, 23 Nov 2011 23:55:44 +0100 Sender: jhs@berklix.com Cc: freebsd-questions@freebsd.org, Frank Subject: Re: Free BSD Website Question X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 22:56:17 -0000 Hi, Reference: > From: Jonathan Vomacka > Date: Wed, 23 Nov 2011 17:39:44 -0500 > Message-id: Jonathan Vomacka wrote: > Absolutely not Jonathan, Dont top post please. (But agreed, doesnt seem BSD) Frank, I looked at that site. I saw a Penguin. & http://www.webhosting.net/linux_web_hosting.aspx Nothing BSD seen. If you want to be listed, provide URLS to [Free]BSD based products or services. you offer, then it might be worth redirecting this from questions@ to a more appropriate address. But if no BSD, sorry, not appropriate. > On Nov 23, 2011 4:54 PM, "Frank" wrote: > > > Hey FreeBSD, > > > > I saw that you had a list of web hosting providers on your website and > > wondered if you would consider adding WebHosting.net to your list. > > http://www.freebsd.org/commercial/isp.html > > > > We have been around since 1998 and focus on more advanced hosting needs > > like cloud hosting, exchange hosting, and dedicated servers. We have > > recently launched a new version of our site and are also doing a bit of a > > push to have more people try our service. > > > > If you would consider adding us to your list we would be incredibly > > grateful and please let me know if you’d like any more information about > > WebHosting.net. > > > > -Frank Anderson > > *webhosting.net* > > reliable. scalable. secure. > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to " > > freebsd-questions-unsubscribe@freebsd.org" > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > Cheers, Julian -- Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com Reply below not above, cumulative like a play script, & indent with "> ". Format: Plain text. Not HTML, multipart/alternative, base64, quoted-printable. From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 22:58:00 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 08F99106566B for ; Wed, 23 Nov 2011 22:58:00 +0000 (UTC) (envelope-from jhs@berklix.com) Received: from tower.berklix.org (tower.berklix.org [83.236.223.114]) by mx1.freebsd.org (Postfix) with ESMTP id 8FFA38FC08 for ; Wed, 23 Nov 2011 22:57:59 +0000 (UTC) Received: from mart.js.berklix.net (p57BCF6AA.dip.t-dialin.net [87.188.246.170]) (authenticated bits=0) by tower.berklix.org (8.14.2/8.14.2) with ESMTP id pANMvvIX074967; Wed, 23 Nov 2011 22:57:58 GMT (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (fire.js.berklix.net [192.168.91.41]) by mart.js.berklix.net (8.14.3/8.14.3) with ESMTP id pANMvkbq047891; Wed, 23 Nov 2011 23:57:46 +0100 (CET) (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (localhost [127.0.0.1]) by fire.js.berklix.net (8.14.4/8.14.4) with ESMTP id pANMvYxb042851; Wed, 23 Nov 2011 22:57:40 GMT (envelope-from jhs@fire.js.berklix.net) Message-Id: <201111232257.pANMvYxb042851@fire.js.berklix.net> To: Carl Johnson From: "Julian H. Stacey" Organization: http://www.berklix.com BSD Unix Linux Consultancy, Munich Germany User-agent: EXMH on FreeBSD http://www.berklix.com/free/ X-URL: http://www.berklix.com In-reply-to: Your message "Wed, 23 Nov 2011 14:53:41 PST." <87bos2e9hm.fsf@oak.localnet> Date: Wed, 23 Nov 2011 23:57:34 +0100 Sender: jhs@berklix.com Cc: freebsd-questions@freebsd.org Subject: Re: Invalid fdisk partition table found X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 22:58:00 -0000 Hi, Reference: > From: Carl Johnson > Date: Wed, 23 Nov 2011 14:53:41 -0800 > Message-id: <87bos2e9hm.fsf@oak.localnet> Carl Johnson wrote: > "Julian H. Stacey" writes: > > > > > @ suggestions: > > 1 Try > > bsdlabel -B -w -r /dev/da1 > > echo unplug, reinsert > > newfs /dev/da1a > > > > 2 Base of _my_ man fdisk > > " When running multi user, you cannot write unless you first run this: > > sysctl kern.geom.debugflags=16 > > " > > > > It looks like I never got round to sending in a send-pr for that, so feel free > > looks like its been that way at least since 7.1.see > > http://berklix.com/~jhs/src/bsd/fixes/FreeBSD/src/gen/sbin/fdisk/ > > I thought I had seen a mention of that somewhere, so I grep'ed the man > pages. I found hints on geom(4) and boot0cfg(8), but they certainly > aren't obvious. Yup, bit me too long ago, presumably from my patch, bit me at 7.1 OK I'll bung in a quick send-pr Cheers, Julian -- Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com Reply below not above, cumulative like a play script, & indent with "> ". Format: Plain text. Not HTML, multipart/alternative, base64, quoted-printable. From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 23:09:16 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D89FB106566B for ; Wed, 23 Nov 2011 23:09:16 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id A1CA58FC0C for ; Wed, 23 Nov 2011 23:09:16 +0000 (UTC) Received: by iakl21 with SMTP id l21so3345450iak.13 for ; Wed, 23 Nov 2011 15:09:16 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:references:in-reply-to:mime-version :content-type:content-transfer-encoding:message-id; bh=K6WPDBWctzjCplnuyfiLL0XnFxI0ElGMF5UPcqTx+K0=; b=shAgStDSGzBnIW3sC4c0u5D+j5XYj8xi7gC5gyeCpCZjFM/y+wXxiozYNlXfwAzNXv rjgtj/KVOyZNuP3/u5D8Ha8ar9Og4FytwUXJZtwnizp0iURJDd3KA5R9FZh5Wj6HGVmq +YbCOR0IgdftCnPSLu5ldMRxoG7LN69/Xr8TY= Received: by 10.231.69.20 with SMTP id x20mr1767749ibi.68.1322089755342; Wed, 23 Nov 2011 15:09:15 -0800 (PST) Received: from luna.wi.rr.com (cpe-184-58-138-79.wi.res.rr.com. [184.58.138.79]) by mx.google.com with ESMTPS id jm11sm78914983ibb.1.2011.11.23.15.09.13 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 23 Nov 2011 15:09:13 -0800 (PST) From: ajtiM To: freebsd-questions@freebsd.org Date: Wed, 23 Nov 2011 17:09:02 -0600 User-Agent: KMail/1.13.7 (FreeBSD/9.0-RC2; KDE/4.7.3; i386; ; ) References: <201111230539.21395.lumiwa@gmail.com> <20111123124633.28028a25.freebsd@edvax.de> <201111230731.07527.lumiwa@gmail.com> In-Reply-To: <201111230731.07527.lumiwa@gmail.com> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201111231709.02624.lumiwa@gmail.com> Subject: Re: .config X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 23:09:16 -0000 On Wednesday 23 November 2011 07:31:07 ajtiM wrote: > On Wednesday 23 November 2011 05:46:33 Polytropon wrote: > > On Wed, 23 Nov 2011 05:39:21 -0600, ajtiM wrote: > > > Hi! > > > > > > I succesfully installed FreeBSD 9.0 RC-2 and I didn't have problems > > > with bsdinstall and others. What I didn't have on 8.2 is when I start > > > KDE4 with startx I got directory .config in /. I have one .config in > > > /home but what it happened? When I deleted as root and I start again > > > KDE4 as user I got it again. Inside is a file Trolltech.conf (the same > > > is in /home/.config). > > > > That file seems to be part of Qt. How can it be > > created outside your $HOME when you startx? That's > > somewhat strange... how _can_ that happen? > > > > % cd > > % touch ../bla > > touch: ../bla: Permission denied > > % touch /bla > > touch: /bla: Permission denied > > > > Only root permissions allow the creation of files > > in that specific directories. > > > > Neither /.config or /home/.config should exist. > > It shoud be ~/.config for your user account. > > > > I also have ~/.config/Trolltech.conf. I'm not using > > KDE, but one KDE program, maybe other Qt-based programs. > > Maybe one of them has installed the directory (at > > this correct location)? > > > > % ls .config/ > > Trolltech.conf > > audacious/ > > autostart/ > > gsmartcontrol/ > > gtk-2.0/ > > menus/ > > > > Okay, seems that other toolkits also use it. :-) > > I don't know how this happened but I have it start all the time when I > startx. Troltech.conf: > > [Qt%20Plugin%20Cache%204.7.false] > usr\local\kde4\lib\kde4\plugins\kauth\backend\kauth_backend_plugin.so=40704 > , 0, i386 usr/local/share/qt4/mkspecs/freebsd g++-4 full-config, 201 > 1-11-20T16:14:25 > usr\local\kde4\lib\kde4\plugins\kauth\helper\kauth_helper_plugin.so=40704, > 0, i386 usr/local/share/qt4/mkspecs/freebsd g++-4 full-config, 2011- > 11-20T16:14:25 > > Mitja > -------- > http://jpgmag.com/people/lumiwa I found a link: http://forum.kde.org/viewtopic.php?f=63&t=92815 Mitja -------- http://jpgmag.com/people/lumiwa From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 23:23:57 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 18F04106564A; Wed, 23 Nov 2011 23:23:57 +0000 (UTC) (envelope-from villa.alberto@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 08BC78FC0C; Wed, 23 Nov 2011 23:23:55 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so2863725bkb.13 for ; Wed, 23 Nov 2011 15:23:54 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=sender:from:organization:to:subject:date:user-agent:cc:references :in-reply-to:mime-version:content-type:content-transfer-encoding :message-id; bh=UPv3b1hnpwWxpfvbLPbgHiyo1skiO8hPaOsB4YoB47s=; b=ZBC5c7sGvty0JHNIyO8Q5WRCSI3DMpZsmq2yqqpSDTM/xivZrd/lm/nGy+Wkz5xSsm raGlF2+3CukmxrOIsHHNaiT4p6E8T6uFAs+YAA94xncvjLV8fko80LZppE9nd3Hx16qw 7GnyqY8jIItG2XrSvfHGl/KLGjYb2yv4YFF3Q= Received: by 10.204.157.27 with SMTP id z27mr24494128bkw.37.1322090634642; Wed, 23 Nov 2011 15:23:54 -0800 (PST) Received: from woodstock.peanuts (host214-68-dynamic.45-79-r.retail.telecomitalia.it. [79.45.68.214]) by mx.google.com with ESMTPS id i3sm23512559faf.0.2011.11.23.15.23.51 (version=SSLv3 cipher=OTHER); Wed, 23 Nov 2011 15:23:53 -0800 (PST) Sender: Alberto Villa From: Alberto Villa Organization: The FreeBSD Project To: Yuri Date: Thu, 24 Nov 2011 00:23:45 +0100 User-Agent: KMail/1.13.7 (FreeBSD/9.0-RC2; KDE/4.7.3; amd64; ; ) References: <4EC98563.7010206@rawbw.com> <201111232045.23022.avilla@freebsd.org> <4ECD58EF.2000206@rawbw.com> In-Reply-To: <4ECD58EF.2000206@rawbw.com> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart2845357.uM0gnAmCaR"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <201111240023.48876.avilla@freebsd.org> Cc: ports@freebsd.org, sylvio@freebsd.org, FreeBSD Questions , freebsd-ports@freebsd.org Subject: Re: linphone-base conflicts with ortp and fails to install, it also fails to build: error: expected specifier-qualifier-list before 'UInt96' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 23:23:57 -0000 --nextPart2845357.uM0gnAmCaR Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable On Wednesday 23 November 2011 21:34:55 Yuri wrote: > I updated via cvsup (*default release=3Dcvs tag=3D.) but I don't see the > relevant ports UPDATING record. > The only recent record there is 20111123 and it is related to > databases/redis. http://www.freebsd.org/cgi/cvsweb.cgi/ports/UPDATING.diff?r1=3D1.1171;r2=3D= 1.1172;f=3Dh =2D-=20 Alberto Villa, FreeBSD committer http://people.FreeBSD.org/~avilla Not all men who drink are poets. Some of us drink because we aren't poets. --nextPart2845357.uM0gnAmCaR Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (FreeBSD) iJwEAAECAAYFAk7NgIQACgkQ3xiC6kQ1CoubcAP/TC4onieB7f5Zv29QrsX7hndL 8gRj4fEM5Ucm/Sa5XvjX7enVzy3VUJEKEUGDPCHvY9rWax2iIF8WLkOP56W1Yn+0 XSd6+qFL2+uCeHa+hzMzL8sO8uAOg5abriF8STzRei7Ht80nYqn85mlfN6w+aSNT VH0ZXgJ2K9z/CToKHNo= =DKkt -----END PGP SIGNATURE----- --nextPart2845357.uM0gnAmCaR-- From owner-freebsd-questions@FreeBSD.ORG Wed Nov 23 23:26:27 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9FD511065676; Wed, 23 Nov 2011 23:26:27 +0000 (UTC) (envelope-from yuri@rawbw.com) Received: from shell0.rawbw.com (shell0.rawbw.com [198.144.192.45]) by mx1.freebsd.org (Postfix) with ESMTP id 85F9C8FC14; Wed, 23 Nov 2011 23:26:27 +0000 (UTC) Received: from eagle.yuri.org (stunnel@localhost [127.0.0.1]) (authenticated bits=0) by shell0.rawbw.com (8.14.4/8.14.4) with ESMTP id pANNQPDn013084; Wed, 23 Nov 2011 15:26:26 -0800 (PST) (envelope-from yuri@rawbw.com) Message-ID: <4ECD8121.1080707@rawbw.com> Date: Wed, 23 Nov 2011 15:26:25 -0800 From: Yuri User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:8.0) Gecko/20111117 Thunderbird/8.0 MIME-Version: 1.0 To: Alberto Villa References: <4EC98563.7010206@rawbw.com> <201111232045.23022.avilla@freebsd.org> <4ECD58EF.2000206@rawbw.com> <201111240023.48876.avilla@freebsd.org> In-Reply-To: <201111240023.48876.avilla@freebsd.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: ports@freebsd.org, sylvio@freebsd.org, FreeBSD Questions , freebsd-ports@freebsd.org Subject: Re: linphone-base conflicts with ortp and fails to install, it also fails to build: error: expected specifier-qualifier-list before 'UInt96' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2011 23:26:27 -0000 On 11/23/2011 15:23, Alberto Villa wrote: > On Wednesday 23 November 2011 21:34:55 Yuri wrote: >> I updated via cvsup (*default release=cvs tag=.) but I don't see the >> relevant ports UPDATING record. >> The only recent record there is 20111123 and it is related to >> databases/redis. > http://www.freebsd.org/cgi/cvsweb.cgi/ports/UPDATING.diff?r1=1.1171;r2=1.1172;f=h Thanks, I got it! cvsup probably has some delay. Yuri From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 00:08:45 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EAF53106566B for ; Thu, 24 Nov 2011 00:08:45 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (wonkity.com [67.158.26.137]) by mx1.freebsd.org (Postfix) with ESMTP id AB54D8FC0A for ; Thu, 24 Nov 2011 00:08:45 +0000 (UTC) Received: from wonkity.com (localhost [127.0.0.1]) by wonkity.com (8.14.5/8.14.5) with ESMTP id pAO08XCx065320; Wed, 23 Nov 2011 17:08:33 -0700 (MST) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.14.5/8.14.5/Submit) with ESMTP id pAO08XrD065317; Wed, 23 Nov 2011 17:08:33 -0700 (MST) (envelope-from wblock@wonkity.com) Date: Wed, 23 Nov 2011 17:08:33 -0700 (MST) From: Warren Block To: "Julian H. Stacey" In-Reply-To: <201111232108.pANL80g3041149@fire.js.berklix.net> Message-ID: References: <201111232108.pANL80g3041149@fire.js.berklix.net> User-Agent: Alpine 2.00 (BSF 1167 2008-08-23) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.7 (wonkity.com [127.0.0.1]); Wed, 23 Nov 2011 17:08:33 -0700 (MST) Cc: "freebsd-questions@freebsd.org" , Robert Subject: Re: Invalid fdisk partition table found X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 00:08:46 -0000 On Wed, 23 Nov 2011, Julian H. Stacey wrote: > 2 Base of _my_ man fdisk > " When running multi user, you cannot write unless you first run this: > sysctl kern.geom.debugflags=16 > " But that's not quite correct. Setting debugflags to 16 allows writes to a partition that's mounted, something that should not normally be needed. It will give an error instead of allowing writes in that case. So if writes succeeded, that wasn't the problem. 'gpart -F destroy {device}' may help recover the CF cards. From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 04:31:37 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B5ED0106564A for ; Thu, 24 Nov 2011 04:31:37 +0000 (UTC) (envelope-from traveling08@cox.net) Received: from fed1rmfepo102.cox.net (fed1rmfepo102.cox.net [68.230.241.144]) by mx1.freebsd.org (Postfix) with ESMTP id 90B728FC12 for ; Thu, 24 Nov 2011 04:31:37 +0000 (UTC) Received: from fed1rmimpo110.cox.net ([68.230.241.159]) by fed1rmfepo102.cox.net (InterMail vM.8.01.04.00 201-2260-137-20101110) with ESMTP id <20111124043137.SQZT3805.fed1rmfepo102.cox.net@fed1rmimpo110.cox.net> for ; Wed, 23 Nov 2011 23:31:37 -0500 Received: from dell64 ([72.220.91.219]) by fed1rmimpo110.cox.net with bizsmtp id 0sXc1i00F4jy6EY03sXcAu; Wed, 23 Nov 2011 23:31:36 -0500 X-CT-Class: Clean X-CT-Score: 0.00 X-CT-RefID: str=0001.0A020206.4ECDC8A9.000B,ss=1,re=0.000,fgs=0 X-CT-Spam: 0 X-Authority-Analysis: v=1.1 cv=9Z0RskaryAsKRpUoO+47aHK6JHg1pMXCNRauymPQKhc= c=1 sm=1 a=va-TFwv_FOkA:10 a=G8Uczd0VNMoA:10 a=kj9zAlcOel0A:10 a=olICo1sKaMXbpqbYUd6B5g==:17 a=kviXuzpPAAAA:8 a=NRF7K_vUAAAA:8 a=ul9T4lDzbFbKIhV1_1kA:9 a=iqf81QrwLFwtBn1FRUoA:7 a=CjuIK1q_8ugA:10 a=4vB-4DCPJfMA:10 a=MFc6XYY7ANoA:10 a=olICo1sKaMXbpqbYUd6B5g==:117 X-CM-Score: 0.00 Authentication-Results: cox.net; none Date: Wed, 23 Nov 2011 20:31:31 -0800 From: Robert To: freebsd-questions@freebsd.org Message-ID: <20111123203131.3e8d5a63@dell64> X-Mailer: Claws Mail 3.7.10 (GTK+ 2.24.6; amd64-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Fw: Invalid fdisk partition table found X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 04:31:37 -0000 Just noticed that I did not include questions@. It has been a long day. Begin forwarded message: Date: Wed, 23 Nov 2011 19:21:54 -0800 From: Robert To: "Julian H. Stacey" Subject: Re: Invalid fdisk partition table found Julian and Warren thanks for the responses. On Wed, 23 Nov 2011 22:08:00 +0100 "Julian H. Stacey" wrote: > Robert wrote: > > Greetings > > > > [robert@dell64] ~> uname -a > > FreeBSD dell64.shasta204.local 8.2-STABLE FreeBSD 8.2-STABLE #34: > > Fri Nov 18 06:43:01 PST 2011 > > root@dell64.shasta204.local:/usr/obj/usr/src/sys/GENERIC amd64 > > > > I have two Lexar Professional 600X 16GB compact flash cards that are > > unusable. fdisk shows: > > > Is there any way I can restore these CF cards to 16GB? Any help or > > suggestions will be greatly appreciated. > > @ suggestions: > 1 Try > bsdlabel -B -w -r /dev/da1 [robert@dell64] ~> sudo bsdlabel -B -w -r /dev/da1 Password: [robert@dell64] ~> > echo unplug, reinsert Not sure if you actually wanted me to unplug and reinsert the CF card...so I did both [robert@dell64] ~> echo unplug, reinsert unplug, reinsert and physically unplugged and reinserted the CF card > newfs /dev/da1a ^ ??? [robert@dell64] ~> sudo newfs /dev/da1a newfs: /dev/da1a: could not find special device [robert@dell64] ~> sudo newfs /dev/da1 /dev/da1: 29.5MB (60480 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 7.39MB, 473 blks, 960 inodes. super-block backups (for fsck -b #) at: 160, 15296, 30432, 45568 cg 0: bad magic number [robert@dell64] ~> fdisk /dev/da1 ******* Working on device /dev/da1 ******* parameters extracted from in-core disklabel are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) parameters to be used for BIOS calculations are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) fdisk: invalid fdisk partition table found Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 32, size 59360 (28 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 28/ head 63/ sector 32 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: No change from before. > > 2 Base of _my_ man fdisk > " When running multi user, you cannot write unless you first run > this: sysctl kern.geom.debugflags=16 I had failed to mention in the original post that I had seen something in my searches about problems since 7.1. I had tried booting from an old 6.2 disk and attempted all of this under "fixit" with no luck. And also tried in single user mode. Warren, [robert@dell64] ~> sudo gpart destroy -F da1 gpart: geom 'da1': Invalid argument [robert@dell64] ~> sudo gpart create -s GPT da1 da1 created [robert@dell64] ~> sudo gpart bootcode -b /boot/pmbr da1 bootcode written to da1 [robert@dell64] ~> sudo gpart destroy -F da1 da1 destroyed [robert@dell64] ~> fdisk /dev/da1 ******* Working on device /dev/da1 ******* parameters extracted from in-core disklabel are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) parameters to be used for BIOS calculations are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) fdisk: invalid fdisk partition table found Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 32, size 59360 (28 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 28/ head 63/ sector 32 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: I see the flashing lights like it is writing to the CF card but nothing changes. More suggestions welcome. These are quite expensive CF cards. Thanks again Robert From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 05:16:08 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F2B70106564A for ; Thu, 24 Nov 2011 05:16:07 +0000 (UTC) (envelope-from martin@dc.cis.okstate.edu) Received: from x.it.okstate.edu (x.it.okstate.edu [139.78.2.13]) by mx1.freebsd.org (Postfix) with ESMTP id C66608FC12 for ; Thu, 24 Nov 2011 05:16:07 +0000 (UTC) Received: from dc.cis.okstate.edu (localhost [127.0.0.1]) by x.it.okstate.edu (8.14.4/8.14.4) with ESMTP id pAO51jUb023756 for ; Wed, 23 Nov 2011 23:01:45 -0600 (CST) (envelope-from martin@dc.cis.okstate.edu) Message-Id: <201111240501.pAO51jUb023756@x.it.okstate.edu> To: "freebsd-questions@freebsd.org" MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-ID: <23754.1322110905.1@dc.cis.okstate.edu> Date: Wed, 23 Nov 2011 23:01:45 -0600 From: Martin McCormick Subject: Rsync and Preservation of Ownership and Permissions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 05:16:08 -0000 Rsync is a great utility, but is there a way to preserve ownership and permissions if rsync remotely logs in to a backup server as a normal user? The recovery process is run by root but copies all the files from the backup server as a normal user and uses its root capabilities to restore them. What happens now is that all the files end up owned by and in the group of the user ID that copied the information from the client to the server. That's obviously not too useful so I suspect there is a better way than trying to make a remote login to root from another system. Basically, cron starts a backup as root on system A. System A makes a remote ssh connection using the -e flag to backups@server. The system trying to recover the files starts a rsync process as root which remotely connects to backups@server to retrieve the files. In practice, the files come across but every last one of them is owned by and in the group of user backups. Any ideas are greatly appreciated. Thank you. From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 07:24:27 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EEC39106564A for ; Thu, 24 Nov 2011 07:24:27 +0000 (UTC) (envelope-from kudzu@tenebras.com) Received: from mail-ww0-f50.google.com (mail-ww0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id 8EA588FC16 for ; Thu, 24 Nov 2011 07:24:27 +0000 (UTC) Received: by wwg14 with SMTP id 14so3693818wwg.31 for ; Wed, 23 Nov 2011 23:24:26 -0800 (PST) MIME-Version: 1.0 Received: by 10.227.208.149 with SMTP id gc21mr17173588wbb.10.1322119466426; Wed, 23 Nov 2011 23:24:26 -0800 (PST) Received: by 10.180.81.193 with HTTP; Wed, 23 Nov 2011 23:24:26 -0800 (PST) In-Reply-To: <201111240501.pAO51jUb023756@x.it.okstate.edu> References: <201111240501.pAO51jUb023756@x.it.okstate.edu> Date: Wed, 23 Nov 2011 23:24:26 -0800 Message-ID: From: Michael Sierchio To: Martin McCormick Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: "freebsd-questions@freebsd.org" Subject: Re: Rsync and Preservation of Ownership and Permissions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 07:24:28 -0000 On Wed, Nov 23, 2011 at 9:01 PM, Martin McCormick wrote: > =A0 =A0 =A0 =A0Rsync is a great utility, but is there a way to preserve > ownership and permissions if rsync remotely logs in to a backup > server as a normal user? Does the same user exist on the remote system, with the same uid, etc.? If you're using rsync with ssh as the transport, and connecting to the remote machine as the backups user, that's who will own the files on its local filesystem... You've written a lot of narrative, but show us precisely what commands you're running. Why would you run the command as root, and ssh as backups, when you want them to be owned by "normal" ? You can run the command as root, and use restricted ssh keys (use authorized_keys to restrict it to executing a specific rsync command).... you can run rsync as a regular user to that user's account on the remote system... > =A0 =A0 =A0 =A0The recovery process is run by root but copies all the > files from the backup server as a normal user and uses its root > capabilities to restore them. > > =A0 =A0 =A0 =A0What happens now is that all the files end up owned by > and in the group of the user ID that copied the information from > the client to the server. That's obviously not too useful so I > suspect there is a better way than trying to make a remote login > to root from another system. > > =A0 =A0 =A0 =A0Basically, cron starts a backup as root on system A. > System A makes a remote ssh connection using the -e flag to > backups@server. The system trying to recover the files starts a > rsync process as root which remotely connects to backups@server > to retrieve the files. > > =A0 =A0 =A0 =A0In practice, the files come across but every last one of > them is owned by and in the group of user backups. > > =A0 =A0 =A0 =A0Any ideas are greatly appreciated. > > Thank you. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" > From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 07:32:42 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id ABE5F106566C for ; Thu, 24 Nov 2011 07:32:42 +0000 (UTC) (envelope-from basarevych@gmail.com) Received: from mail-qy0-f182.google.com (mail-qy0-f182.google.com [209.85.216.182]) by mx1.freebsd.org (Postfix) with ESMTP id 6E3EA8FC15 for ; Thu, 24 Nov 2011 07:32:42 +0000 (UTC) Received: by qyg36 with SMTP id 36so2411536qyg.13 for ; Wed, 23 Nov 2011 23:32:41 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; bh=K+SMek/0myFiL/KOorYWjKI+U4PBC+dGm4HQ7SSVnvU=; b=GD50+SoH6n3VxucT519k6rjzyjZObvlDFIuA9BLWnT0XReROpcEybhDS+hEOgAknhL VeS5N+RPhYcOlnlCp+sEaeEEMyg93QaLksmcCmP/BLoiAXuqjBnD3a55ZYr+4zyHUl6h eBmBVCuLTaVif1U/jR03OiAeuUizwa4cvh8ho= MIME-Version: 1.0 Received: by 10.229.63.194 with SMTP id c2mr3127379qci.18.1322119961596; Wed, 23 Nov 2011 23:32:41 -0800 (PST) Received: by 10.224.45.141 with HTTP; Wed, 23 Nov 2011 23:32:41 -0800 (PST) Date: Thu, 24 Nov 2011 09:32:41 +0200 Message-ID: From: Ross To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=UTF-8 Subject: Do you run OSSEC on 9.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 07:32:42 -0000 I am getting emails about hidden files in /dev. Before that (on 8.2) everything was OK. What should I do? OSSEC HIDS Notification. 2011 Nov 24 08:17:25 Received From: coffin->rootcheck Rule: 510 fired (level 7) -> "Host-based anomaly detection event (rootcheck)." Portion of the log(s): Files hidden inside directory '/dev'. Link count does not match number of files (9,27). --END OF NOTIFICATION From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 08:11:21 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 573ED106566B for ; Thu, 24 Nov 2011 08:11:21 +0000 (UTC) (envelope-from perryh@pluto.rain.com) Received: from agora.rdrop.com (unknown [IPv6:2607:f678:1010::34]) by mx1.freebsd.org (Postfix) with ESMTP id 384A68FC0A for ; Thu, 24 Nov 2011 08:11:21 +0000 (UTC) Received: from agora.rdrop.com (66@localhost [127.0.0.1]) by agora.rdrop.com (8.13.1/8.12.7) with ESMTP id pAO8BHAP063140 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Thu, 24 Nov 2011 00:11:17 -0800 (PST) (envelope-from perryh@pluto.rain.com) Received: (from uucp@localhost) by agora.rdrop.com (8.13.1/8.12.9/Submit) with UUCP id pAO8BHVH063139; Thu, 24 Nov 2011 00:11:17 -0800 (PST) Received: from fbsd81 ([192.168.200.81]) by pluto.rain.com (4.1/SMI-4.1-pluto-M2060407) id AA20525; Thu, 24 Nov 11 00:08:53 PST Date: Thu, 24 Nov 2011 07:08:29 -0800 From: perryh@pluto.rain.com To: martin@dc.cis.okstate.edu Message-Id: <4ece5ded.AjV2J/4CEfBkKHj9%perryh@pluto.rain.com> References: <201111240501.pAO51jUb023756@x.it.okstate.edu> In-Reply-To: <201111240501.pAO51jUb023756@x.it.okstate.edu> User-Agent: nail 11.25 7/29/05 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Rsync and Preservation of Ownership and Permissions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 08:11:21 -0000 Martin McCormick wrote: > Rsync is a great utility, but is there a way to preserve > ownership and permissions if rsync remotely logs in to a backup > server as a normal user? AFAIK, no, because only root may change the ownership of a file -- see chown(2). > Any ideas are greatly appreciated. Perhaps you could have rsync log in to a jail on the backup server, where it could safely be granted root permission. From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 08:17:39 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7E68C106566C for ; Thu, 24 Nov 2011 08:17:39 +0000 (UTC) (envelope-from don_oles@able.com.ua) Received: from dell.able.com.ua (dell.able.com.ua [89.162.185.234]) by mx1.freebsd.org (Postfix) with ESMTP id F2E678FC13 for ; Thu, 24 Nov 2011 08:17:38 +0000 (UTC) Received: from [10.0.0.2] (inquiring.reunion.volia.net [93.75.195.63]) (using TLSv1 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: don_oles) by dell.able.com.ua (Postfix) with ESMTPSA id A27CC11450 for ; Thu, 24 Nov 2011 10:01:01 +0200 (EET) X-DomainKeys: Sendmail DomainKeys Filter v1.0.2 dell.able.com.ua A27CC11450 DomainKey-Signature: a=rsa-sha1; s=default; d=able.com.ua; c=nofws; q=dns; h=x-virus-status:x-virus-scanned:message-id:date:from: user-agent:mime-version:to:subject:content-type:content-transfer-encoding; b=mXHW7W9iEXNCIrQk+BS38skjwd7KhLI7KdQyIYfygv6xAqfn55hHHn3hXk3LaOlEi WlhvmNbIS5VMp6QQWZMkA== X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.96 at dell.able.com.ua Message-ID: <4ECDF9B4.6080409@able.com.ua> Date: Thu, 24 Nov 2011 10:00:52 +0200 From: Oles Hnatkevych User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=KOI8-R; format=flowed Content-Transfer-Encoding: 7bit Subject: 8.2 broken CPU speed detection on IBM server X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 08:17:39 -0000 Hello! We've got very strange problem with (at least) two identical IBM Servers System Information Manufacturer: IBM Product Name: IBM System x3650 -[79792AG]- FreeBSD 8.2-RELEASE is installed. Depending on the phase of the moon when kernel boots with a change close to 70% the CPU speed is wrongly detected, affecting timing operation for the system. This looks this way: FreeBSD 8.2-RELEASE #0: Thu Sep 22 13:43:28 EEST 2011 root@newgate.metro.kiev.ua:/usr/obj/usr/src/sys/NEWGATE i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (10748.77-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbff Features2=0x4e33d AMD Features=0x20100000 AMD Features2=0x1 TSC: P-state invariant 10.748 Ghz!!! As a result we see 296 interrupts per seconds on CPU (six times less) # vmstat -i interrupt total rate irq15: ata1 35 0 irq17: aac0 525059 22 irq23: uhci0 uhci2+ 37899 1 cpu0: timer 7063047 296 irq256: bce0 5275133 221 irq257: bce1 43824849 1842 cpu3: timer 7063046 296 cpu2: timer 7063043 296 cpu1: timer 7063045 296 Total 77915156 3275 After that ping, top and other applications depending on timer slow down six times (i.e. pings once in 6 seconds). And to round this up: # time sleep 1 real 0m6.737s user 0m0.000s sys 0m0.000s Playing with BIOS settings did not help at all. Even pressing 'restore defaults'. Updating BIOS did not help either. On the live system kernel has been recompiled, but that does not matter since on another test box the generic kernel is affected by the same problem. What to do???? Try 7-CURRENT? Install Linux? ;) -- ---------- Oles Hnatkevych Skype: don_oles http://gnut.able.com.ua/ From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 09:05:34 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F190D1065672 for ; Thu, 24 Nov 2011 09:05:34 +0000 (UTC) (envelope-from odhiambo@gmail.com) Received: from mail-gy0-f182.google.com (mail-gy0-f182.google.com [209.85.160.182]) by mx1.freebsd.org (Postfix) with ESMTP id AE0C38FC0C for ; Thu, 24 Nov 2011 09:05:34 +0000 (UTC) Received: by ghbg20 with SMTP id g20so2057337ghb.13 for ; Thu, 24 Nov 2011 01:05:34 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc:content-type; bh=dNmiJOF1s1JO/4kU4QktD/OVqRQHVUgDic6gpjbUf20=; b=gXPX8lQtjWjHTIdcuh/gqE45Bieh+31aQ/TntTSg7Ww3+D9JD+Msdr1cAY3wi/UaST DbmJvb9b942s1NKVmvjNMsi9YVUYgCBgkVfcDpcsXMLJJWKQYRGjNDciywmLt1cBWyTx GW3Bcf/Tsqj7XxtZD6Dj4vAkmzKoJckl/3pEs= Received: by 10.14.14.210 with SMTP id d58mr1689261eed.22.1322125533208; Thu, 24 Nov 2011 01:05:33 -0800 (PST) MIME-Version: 1.0 Received: by 10.213.22.78 with HTTP; Thu, 24 Nov 2011 01:04:52 -0800 (PST) In-Reply-To: References: From: Odhiambo Washington Date: Thu, 24 Nov 2011 12:04:52 +0300 Message-ID: To: Ross Content-Type: multipart/related; boundary=0016e658614ec1602804b27756d9 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: Do you run OSSEC on 9.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 09:05:35 -0000 --0016e658614ec1602804b27756d9 Content-Type: text/plain; charset=UTF-8 Getting the same too, since I upgraded my 8.2 -> 9.0-PRE. Would be interested in the answers too. On Thu, Nov 24, 2011 at 10:32, Ross wrote: > I am getting emails about hidden files in /dev. Before that (on 8.2) > everything was OK. What should I do? > > > OSSEC HIDS Notification. > 2011 Nov 24 08:17:25 > > Received From: coffin->rootcheck > Rule: 510 fired (level 7) -> "Host-based anomaly detection event > (rootcheck)." > Portion of the log(s): > > Files hidden inside directory '/dev'. Link count does not match number > of files (9,27). > > > > --END OF NOTIFICATION > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ I can't hear you -- I'm using the scrambler. Please consider the environment before printing this email. --0016e658614ec1602804b27756d9-- From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 10:07:10 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EF809106566C for ; Thu, 24 Nov 2011 10:07:10 +0000 (UTC) (envelope-from kjkoster@gmail.com) Received: from mail-ww0-f42.google.com (mail-ww0-f42.google.com [74.125.82.42]) by mx1.freebsd.org (Postfix) with ESMTP id 87CA78FC0A for ; Thu, 24 Nov 2011 10:07:10 +0000 (UTC) Received: by wwo28 with SMTP id 28so403126wwo.1 for ; Thu, 24 Nov 2011 02:07:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=content-type:mime-version:subject:from:in-reply-to:date :content-transfer-encoding:message-id:references:to:x-mailer; bh=PJnMHpWGup04Jl9jJRe2A8ls6aZb4c7kASe/UU/v+Vw=; b=W+C8P7A0bw9wqJrzbirTcipIcvEDOEt9wm3p/e2/bjd+vv4i2iAH2pMfxv+r0PYqR8 F3nEuRJnFzdaux2xQAxRopkl9GwD1wGa0JWcdC6pfuHt56esWEVOccGl9zS8RpNVPqIl jCOcp3ZRe6r82p0fHNMV5atiMD6yLGLdGTFfk= Received: by 10.216.212.82 with SMTP id x60mr1038415weo.68.1322129229132; Thu, 24 Nov 2011 02:07:09 -0800 (PST) Received: from [10.0.135.191] (csp4.waag.org. [195.169.148.4]) by mx.google.com with ESMTPS id d17sm23655086wbh.19.2011.11.24.02.07.08 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 24 Nov 2011 02:07:08 -0800 (PST) Content-Type: text/plain; charset=iso-8859-1 Mime-Version: 1.0 (Apple Message framework v1251.1) From: Kees Jan Koster In-Reply-To: <4ECC2CD0.8040902@sentex.net> Date: Thu, 24 Nov 2011 11:07:08 +0100 Content-Transfer-Encoding: quoted-printable Message-Id: <97326E87-B3A2-460F-AE9D-259710B36EA2@gmail.com> References: <4ECC2CD0.8040902@sentex.net> To: freebsd-questions@freebsd.org X-Mailer: Apple Mail (2.1251.1) Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 10:07:11 -0000 Dear All, Thank you so much for the excellent suggestions. I can tell some of you = have a lot of experience troubleshooting this issue. At this stage I ruled out hardware or network issues. These are server = grade network interfaces, new cables and the ifconfig configuration = seems in order. netstat shows no collisions or packet errors for the = past week or so. I am dead certain there is no dupe IP. The other machines on the switch = are currently off (test and load test box) and I still see packet loss. = There simply is no other machine on the subnet that might have the same = IP. This seems to be local to my machine. Here is another reason why I say = that: I can reliably transmit data when I bind to the aliased IP = address: If I use mtr to measure packet loss from saffron (the stricken = machine) to cumin (another machine in a different data center) I see the = following: saffron (ip address a) -> cumin: packet loss saffron (ip address b) -> cumin: no packet loss cumin -> saffron (ip address a): packet loss cumin -> saffron (ip address b): no packet loss This is consistent from running mtr for 5 minutes straight. This to me = shows that the hardware is fine. Using the alias IP address I can run = with no packet loss for as long as I like. Sooo.... Now what? I am completely at a loss. :-/ -- Kees Jan http://java-monitor.com/ kjkoster@kjkoster.org +31651838192 I hate unit tests; I much prefer the illusion that there are no errors = in my code. -- = Hendrik Muller From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 11:16:38 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 09DFF106566B for ; Thu, 24 Nov 2011 11:16:38 +0000 (UTC) (envelope-from jhs@berklix.com) Received: from tower.berklix.org (tower.berklix.org [83.236.223.114]) by mx1.freebsd.org (Postfix) with ESMTP id A242F8FC08 for ; Thu, 24 Nov 2011 11:16:37 +0000 (UTC) Received: from mart.js.berklix.net (p5DCBE8A1.dip.t-dialin.net [93.203.232.161]) (authenticated bits=0) by tower.berklix.org (8.14.2/8.14.2) with ESMTP id pAOBGZ8v087791 for ; Thu, 24 Nov 2011 11:16:36 GMT (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (fire.js.berklix.net [192.168.91.41]) by mart.js.berklix.net (8.14.3/8.14.3) with ESMTP id pAOBGO9c050934 for ; Thu, 24 Nov 2011 12:16:24 +0100 (CET) (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (localhost [127.0.0.1]) by fire.js.berklix.net (8.14.4/8.14.4) with ESMTP id pAOBGH4i098240 for ; Thu, 24 Nov 2011 11:16:23 GMT (envelope-from jhs@fire.js.berklix.net) Message-Id: <201111241116.pAOBGH4i098240@fire.js.berklix.net> To: questions@freebsd.org From: "Julian H. Stacey" Organization: http://www.berklix.com BSD Unix Linux Consultancy, Munich Germany User-agent: EXMH on FreeBSD http://www.berklix.com/free/ X-URL: http://www.berklix.com/~jhs/cv/ Date: Thu, 24 Nov 2011 12:16:17 +0100 Sender: jhs@berklix.com Cc: Subject: Re: Invalid fdisk partition table found (fwd) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 11:16:38 -0000 Hi, Please keep this on list. Forwarded from: "Julian Stacey" http://www.berklix.com/~jhs/ ------- Forwarded Message >From traveling08@cox.net Thu Nov 24 05:15:33 2011 From: Robert To: "Julian H. Stacey" Subject: Re: Invalid fdisk partition table found Message-ID: <20111123192154.5b0a64ab@dell64> In-Reply-To: <201111232108.pANL80g3041149@fire.js.berklix.net> References: <20111123123347.4f439c9c@dell64> <201111232108.pANL80g3041149@fire.js.berklix.net> X-Mailer: Claws Mail 3.7.10 (GTK+ 2.24.6; amd64-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Julian and Warren thanks for the responses. On Wed, 23 Nov 2011 22:08:00 +0100 "Julian H. Stacey" wrote: > Robert wrote: > > Greetings > > > > [robert@dell64] ~> uname -a > > FreeBSD dell64.shasta204.local 8.2-STABLE FreeBSD 8.2-STABLE #34: > > Fri Nov 18 06:43:01 PST 2011 > > root@dell64.shasta204.local:/usr/obj/usr/src/sys/GENERIC amd64 > > > > I have two Lexar Professional 600X 16GB compact flash cards that are > > unusable. fdisk shows: > > > Is there any way I can restore these CF cards to 16GB? Any help or > > suggestions will be greatly appreciated. > > @ suggestions: > 1 Try > bsdlabel -B -w -r /dev/da1 [robert@dell64] ~> sudo bsdlabel -B -w -r /dev/da1 Password: [robert@dell64] ~> > echo unplug, reinsert Not sure if you actually wanted me to unplug and reinsert the CF card...so I did both [robert@dell64] ~> echo unplug, reinsert unplug, reinsert and physically unplugged and reinserted the CF card > newfs /dev/da1a ^ ??? [robert@dell64] ~> sudo newfs /dev/da1a newfs: /dev/da1a: could not find special device [robert@dell64] ~> sudo newfs /dev/da1 /dev/da1: 29.5MB (60480 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 7.39MB, 473 blks, 960 inodes. super-block backups (for fsck -b #) at: 160, 15296, 30432, 45568 cg 0: bad magic number [robert@dell64] ~> fdisk /dev/da1 ******* Working on device /dev/da1 ******* parameters extracted from in-core disklabel are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) parameters to be used for BIOS calculations are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) fdisk: invalid fdisk partition table found Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 32, size 59360 (28 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 28/ head 63/ sector 32 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: No change from before. > > 2 Base of _my_ man fdisk > " When running multi user, you cannot write unless you first run > this: sysctl kern.geom.debugflags=16 I had failed to mention in the original post that I had seen something in my searches about problems since 7.1. I had tried booting from an old 6.2 disk and attempted all of this under "fixit" with no luck. And also tried in single user mode. Warren, [robert@dell64] ~> sudo gpart destroy -F da1 gpart: geom 'da1': Invalid argument [robert@dell64] ~> sudo gpart create -s GPT da1 da1 created [robert@dell64] ~> sudo gpart bootcode -b /boot/pmbr da1 bootcode written to da1 [robert@dell64] ~> sudo gpart destroy -F da1 da1 destroyed [robert@dell64] ~> fdisk /dev/da1 ******* Working on device /dev/da1 ******* parameters extracted from in-core disklabel are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) parameters to be used for BIOS calculations are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) fdisk: invalid fdisk partition table found Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 32, size 59360 (28 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 28/ head 63/ sector 32 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: I see the flashing lights like it is writing to the CF card but nothing changes. More suggestions welcome. These are quite expensive CF cards. Thanks again Robert ------- End of Forwarded Message From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 11:25:27 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B9F971065672 for ; Thu, 24 Nov 2011 11:25:27 +0000 (UTC) (envelope-from nvass@gmx.com) Received: from mailout-eu.gmx.com (mailout-eu.gmx.com [213.165.64.45]) by mx1.freebsd.org (Postfix) with SMTP id 2CD788FC08 for ; Thu, 24 Nov 2011 11:25:27 +0000 (UTC) Received: (qmail invoked by alias); 24 Nov 2011 11:25:25 -0000 Received: from adsl-21.109.242.9.tellas.gr (EHLO [192.168.73.193]) [109.242.9.21] by mail.gmx.com (mp-eu002) with SMTP; 24 Nov 2011 12:25:25 +0100 X-Authenticated: #46156728 X-Provags-ID: V01U2FsdGVkX1/tim8RiMXtmk95ZaI0xhD6iSDI7sQ0ZLupxqJPA7 m0crtxl1ioryWz Message-ID: <4ECE299C.5080003@gmx.com> Date: Thu, 24 Nov 2011 13:25:16 +0200 From: Nikos Vassiliadis User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.17) Gecko/20110414 Thunderbird/3.1.10 MIME-Version: 1.0 To: Odhiambo Washington References: In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit X-Y-GMX-Trusted: 0 Cc: Ross , freebsd-questions@freebsd.org Subject: Re: Do you run OSSEC on 9.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 11:25:27 -0000 Since /dev contains a special filesystem which cannot be used for "simple" files and directories, I would say that the IDS needs some knowledge about it and generic file-checking rules don't apply there. This sounds like a false alert, something must have changed from 8 to 9 and/or the ossec port (and/or ossec signatures). Disclaimer: I am not an ossec user! Nikos On 11/24/2011 11:04 AM, Odhiambo Washington wrote: > Getting the same too, since I upgraded my 8.2 -> 9.0-PRE. > > Would be interested in the answers too. > > > On Thu, Nov 24, 2011 at 10:32, Ross wrote: > >> I am getting emails about hidden files in /dev. Before that (on 8.2) >> everything was OK. What should I do? >> >> >> OSSEC HIDS Notification. >> 2011 Nov 24 08:17:25 >> >> Received From: coffin->rootcheck >> Rule: 510 fired (level 7) -> "Host-based anomaly detection event >> (rootcheck)." >> Portion of the log(s): >> >> Files hidden inside directory '/dev'. Link count does not match number >> of files (9,27). >> >> >> >> --END OF NOTIFICATION >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to " >> freebsd-questions-unsubscribe@freebsd.org" >> > > > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 11:43:14 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 95E81106566C for ; Thu, 24 Nov 2011 11:43:14 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp6.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id F243F8FC0C for ; Thu, 24 Nov 2011 11:43:13 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pAOBhAIM069602 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO) for ; Thu, 24 Nov 2011 11:43:10 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pAOBhAIM069602 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1322134990; bh=0Vsj5T6jw1h3K+5Isl/jURAkRJIh0SphaX8p7bYs5ag=; h=Message-ID:Date:From:MIME-Version:To:Subject:References: In-Reply-To:Content-Type:Cc; b=0AjGwzMFA+yfHgnt8ZAgXU7TiUwXcj3wLOOuZ9PwySkEx0eamkUtZW8q5jD3cUQDZ ij4hsvH8dgyNFAx8k1w7f2UIINGWxe2U4GurfgZvxhJzvD+gNtunGzCLHTcl5j7pd7 qaBf4JyhahnaKQbyZ6OqggnM1Ojec8oW5bopai2g= Message-ID: <4ECE2DC7.2000800@infracaninophile.co.uk> Date: Thu, 24 Nov 2011 11:43:03 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <4ECC2CD0.8040902@sentex.net> <97326E87-B3A2-460F-AE9D-259710B36EA2@gmail.com> In-Reply-To: <97326E87-B3A2-460F-AE9D-259710B36EA2@gmail.com> X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig59BA8DE6AF4D33CE8709854E" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Subject: Re: Diagnosing packet loss X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 11:43:14 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig59BA8DE6AF4D33CE8709854E Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 24/11/2011 10:07, Kees Jan Koster wrote: > This seems to be local to my machine. Here is another reason why I > say that: I can reliably transmit data when I bind to the aliased IP > address: If I use mtr to measure packet loss from saffron (the stricken= > machine) to cumin (another machine in a different data center) I see th= e > following: >=20 > saffron (ip address a) -> cumin: packet loss > saffron (ip address b) -> cumin: no packet loss >=20 > cumin -> saffron (ip address a): packet loss > cumin -> saffron (ip address b): no packet loss >=20 > This is consistent from running mtr for 5 minutes straight. This to > me shows that the hardware is fine. Using the alias IP address I can > run with no packet loss for as long as I like. >=20 > Sooo.... Now what? I am completely at a loss. :-/ Hmm... I wouldn't dismiss hardware problems just yet. Earlier you showed the ifconfig output for your problem machine: > [kjkoster@saffron ~]$ ifconfig bge0 > bge0: flags=3D8843 metric 0 mtu= 1500 > options=3D8009b > ether 00:e0:81:32:ed:b4 > inet 91.196.169.165 netmask 0xfffffff8 broadcast 91.196.169.167 > inet 91.196.169.166 netmask 0xffffffff broadcast 91.196.169.166 > media: Ethernet autoselect (100baseTX ) > status: active Where there is a one-bit difference between the addresses. Can you try temporarily using two even-numbered addresses and then two odd-numbered addresses and repeat your mtr tests? If the packet loss problem correlates with whether the address is even or odd, then I think that's pretty good evidence for a dud network interface: a one-bit problem in a memory register somewhere, occasionally flipping the least significant bit in the address to 0. Another test would be to swap the configuration order (ie. make .166 the primary address and .165 the alias) -- if it's always the first configured address that has problems, again that indicates memory trouble in the hardware. Are these NICs built-in to your motherboard? If so, they will almost certainly share a PHY, which is where the problem would be, and why swapping the cables between interfaces made no difference. Unfortunately in that case to fix the problem, you'll either have to swap out the motherboard or add a separate NIC card to your system. Hopefully the system is still under warranty. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------enig59BA8DE6AF4D33CE8709854E Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7OLc4ACgkQ8Mjk52CukIzsWACcCrgTA5U8feZeudCyeVO3nqe9 2PAAn0a5YFV2aGiD+5tfSLmxQ8dWGqJd =Q+d+ -----END PGP SIGNATURE----- --------------enig59BA8DE6AF4D33CE8709854E-- From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 13:18:51 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5759E106564A for ; Thu, 24 Nov 2011 13:18:51 +0000 (UTC) (envelope-from snoop@email.it) Received: from smtp-out08.email.it (smtp-out08.email.it [212.97.34.23]) by mx1.freebsd.org (Postfix) with ESMTP id DA81B8FC13 for ; Thu, 24 Nov 2011 13:18:50 +0000 (UTC) Received: from localhost (localhost.localdomain [127.0.0.1]) by smtp-out08.email.it (Postfix) with ESMTP id CCFD2C050; Thu, 24 Nov 2011 14:18:48 +0100 (CET) X-Virus-Scanned: amavisd-new at email.it Received: from smtp-out08.email.it ([127.0.0.1]) by localhost (smtp-out08.email.it [127.0.0.1]) (amavisd-new, port 10024) with LMTP id XQSNPCKPkg9I; Thu, 24 Nov 2011 14:18:48 +0100 (CET) Received: from [10.0.0.59] (inhio.eu [84.242.85.251]) by smtp-out08.email.it (Postfix) with ESMTP id 13C8EC040; Thu, 24 Nov 2011 14:18:48 +0100 (CET) From: Snoop To: Damien Fleuriot In-Reply-To: <4EC6518B.4030001@my.gd> References: <1321600146.37903.4.camel@blackfriar.inhio.eu> <4EC6518B.4030001@my.gd> Content-Type: text/plain; charset="us-ascii" Date: Thu, 24 Nov 2011 14:18:46 +0100 Message-ID: <1322140727.58166.8.camel@blackfriar.inhio.eu> Mime-Version: 1.0 X-Mailer: Evolution 2.32.1 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: LAGG and Jails? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 13:18:51 -0000 Sorry about my late reply, I was away for a while. I've fixed that. It was quite trivial but sometimes trivial issues make you get stuck for a while. :-/ ifconfig_bge0="up" ifconfig_bge1="up" cloned_interfaces="lagg0" ifconfig_lagg0="laggproto failover laggport bge0 laggport bge1 10.0.0.56/26" ifconfig_lagg0_alias_0="inet 10.0.0.40 netmask 255.255.255.255" ifconfig_lagg0_alias_1="inet 10.0.0.41 netmask 255.255.255.255" ifconfig_lagg0_alias_2="inet 10.0.0.42 netmask 255.255.255.255" ifconfig_lagg0_alias_3="inet 10.0.0.43 netmask 255.255.255.255" ifconfig_lagg0_alias_4="inet 10.0.0.44 netmask 255.255.255.255" ifconfig_lagg0_alias_5="inet 10.0.0.45 netmask 255.255.255.255" ifconfig_lagg0_alias_6="inet 10.0.0.46 netmask 255.255.255.255" ifconfig_lagg0_alias_7="inet 10.0.0.47 netmask 255.255.255.255" I thought that the first two lines wouldn't be necessary as the "cloned_interface" parameter would have done the job. I was wrong. Without specifying "up" the lagg0 interface comes up but not the physical interfaces. Now everything works well: bge0: flags=8843 metric 0 mtu 1500 options=8009b ether 00:14:5e:80:8a:c0 media: Ethernet autoselect (100baseTX ) status: active bge1: flags=8843 metric 0 mtu 1500 options=8009b ether 00:14:5e:80:8a:c0 media: Ethernet autoselect (100baseTX ) status: active lo0: flags=8049 metric 0 mtu 16384 options=3 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 nd6 options=3 lagg0: flags=8843 metric 0 mtu 1500 options=8009b ether 00:14:5e:80:8a:c0 inet 10.0.0.56 netmask 0xffffffc0 broadcast 10.0.0.63 inet 10.0.0.40 netmask 0xffffffff broadcast 10.0.0.40 inet 10.0.0.41 netmask 0xffffffff broadcast 10.0.0.41 inet 10.0.0.42 netmask 0xffffffff broadcast 10.0.0.42 inet 10.0.0.43 netmask 0xffffffff broadcast 10.0.0.43 inet 10.0.0.44 netmask 0xffffffff broadcast 10.0.0.44 inet 10.0.0.45 netmask 0xffffffff broadcast 10.0.0.45 inet 10.0.0.46 netmask 0xffffffff broadcast 10.0.0.46 inet 10.0.0.47 netmask 0xffffffff broadcast 10.0.0.47 media: Ethernet autoselect status: active laggproto failover laggport: bge1 flags=0<> laggport: bge0 flags=5 Sorry for bothering you guys. Hope this would save some time to someone else. Cheers. On Fri, 2011-11-18 at 13:37 +0100, Damien Fleuriot wrote: > On 11/18/11 8:09 AM, Snoop wrote: > > Does anyone know if it's possible to configure lagg for network > > redundancy on a FreeBSD server containing jails? I'm having problems > > with that. I couldn't found much around therefore I'm not even sure it's > > "doable". > > > > Thanks in advance, any tip will be appreciated. > > > > > Show your ifconfig output, I'm curious about how you configure your lagg > > Also please post your uname -a output and rc.conf > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f Sponsor: Conto Arancio al 4,20%. Zero spese e massima liberta', aprilo in due minuti! Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=11919&d=24-11 From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 13:19:07 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D9AA7106574C for ; Thu, 24 Nov 2011 13:19:07 +0000 (UTC) (envelope-from snoop@email.it) Received: from smtp-out06.email.it (smtp-out06.email.it [212.97.34.22]) by mx1.freebsd.org (Postfix) with ESMTP id 676AF8FC18 for ; Thu, 24 Nov 2011 13:19:07 +0000 (UTC) Received: from localhost (localhost.localdomain [127.0.0.1]) by smtp-out06.email.it (Postfix) with ESMTP id 0E9782C02E; Thu, 24 Nov 2011 14:19:06 +0100 (CET) X-Virus-Scanned: amavisd-new at email.it Received: from smtp-out06.email.it ([127.0.0.1]) by localhost (smtp-out06.email.it [127.0.0.1]) (amavisd-new, port 10024) with LMTP id HNTYMKlZ0PIs; Thu, 24 Nov 2011 14:19:05 +0100 (CET) Received: from [10.0.0.59] (inhio.eu [84.242.85.251]) by smtp-out06.email.it (Postfix) with ESMTP id 1D74A2C018; Thu, 24 Nov 2011 14:19:05 +0100 (CET) From: Snoop To: Damien Fleuriot In-Reply-To: <4EC6518B.4030001@my.gd> References: <1321600146.37903.4.camel@blackfriar.inhio.eu> <4EC6518B.4030001@my.gd> Content-Type: text/plain; charset="us-ascii" Date: Thu, 24 Nov 2011 14:18:46 +0100 Message-ID: <1322140727.58166.8.camel@blackfriar.inhio.eu> Mime-Version: 1.0 X-Mailer: Evolution 2.32.1 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: LAGG and Jails? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 13:19:08 -0000 Sorry about my late reply, I was away for a while. I've fixed that. It was quite trivial but sometimes trivial issues make you get stuck for a while. :-/ ifconfig_bge0="up" ifconfig_bge1="up" cloned_interfaces="lagg0" ifconfig_lagg0="laggproto failover laggport bge0 laggport bge1 10.0.0.56/26" ifconfig_lagg0_alias_0="inet 10.0.0.40 netmask 255.255.255.255" ifconfig_lagg0_alias_1="inet 10.0.0.41 netmask 255.255.255.255" ifconfig_lagg0_alias_2="inet 10.0.0.42 netmask 255.255.255.255" ifconfig_lagg0_alias_3="inet 10.0.0.43 netmask 255.255.255.255" ifconfig_lagg0_alias_4="inet 10.0.0.44 netmask 255.255.255.255" ifconfig_lagg0_alias_5="inet 10.0.0.45 netmask 255.255.255.255" ifconfig_lagg0_alias_6="inet 10.0.0.46 netmask 255.255.255.255" ifconfig_lagg0_alias_7="inet 10.0.0.47 netmask 255.255.255.255" I thought that the first two lines wouldn't be necessary as the "cloned_interface" parameter would have done the job. I was wrong. Without specifying "up" the lagg0 interface comes up but not the physical interfaces. Now everything works well: bge0: flags=8843 metric 0 mtu 1500 options=8009b ether 00:14:5e:80:8a:c0 media: Ethernet autoselect (100baseTX ) status: active bge1: flags=8843 metric 0 mtu 1500 options=8009b ether 00:14:5e:80:8a:c0 media: Ethernet autoselect (100baseTX ) status: active lo0: flags=8049 metric 0 mtu 16384 options=3 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 nd6 options=3 lagg0: flags=8843 metric 0 mtu 1500 options=8009b ether 00:14:5e:80:8a:c0 inet 10.0.0.56 netmask 0xffffffc0 broadcast 10.0.0.63 inet 10.0.0.40 netmask 0xffffffff broadcast 10.0.0.40 inet 10.0.0.41 netmask 0xffffffff broadcast 10.0.0.41 inet 10.0.0.42 netmask 0xffffffff broadcast 10.0.0.42 inet 10.0.0.43 netmask 0xffffffff broadcast 10.0.0.43 inet 10.0.0.44 netmask 0xffffffff broadcast 10.0.0.44 inet 10.0.0.45 netmask 0xffffffff broadcast 10.0.0.45 inet 10.0.0.46 netmask 0xffffffff broadcast 10.0.0.46 inet 10.0.0.47 netmask 0xffffffff broadcast 10.0.0.47 media: Ethernet autoselect status: active laggproto failover laggport: bge1 flags=0<> laggport: bge0 flags=5 Sorry for bothering you guys. Hope this would save some time to someone else. Cheers. On Fri, 2011-11-18 at 13:37 +0100, Damien Fleuriot wrote: > On 11/18/11 8:09 AM, Snoop wrote: > > Does anyone know if it's possible to configure lagg for network > > redundancy on a FreeBSD server containing jails? I'm having problems > > with that. I couldn't found much around therefore I'm not even sure it's > > "doable". > > > > Thanks in advance, any tip will be appreciated. > > > > > Show your ifconfig output, I'm curious about how you configure your lagg > > Also please post your uname -a output and rc.conf > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f Sponsor: Centinaia di Idee Regalo a partire da 1 euro! Su MisterCupido.com alta qualita' a prezzi imbattibili... e spedizioni in 2/3 giorni! Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=11452&d=24-11 From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 13:49:32 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 153FC106566B for ; Thu, 24 Nov 2011 13:49:32 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: from mail-gy0-f182.google.com (mail-gy0-f182.google.com [209.85.160.182]) by mx1.freebsd.org (Postfix) with ESMTP id CAB138FC16 for ; Thu, 24 Nov 2011 13:49:31 +0000 (UTC) Received: by ghbg20 with SMTP id g20so2406144ghb.13 for ; Thu, 24 Nov 2011 05:49:31 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type :content-transfer-encoding:message-id; bh=L89y/MB+oyZs5q24xMLnuQGSpaQ6nuPyVeDJ6Vy7js8=; b=Zk0UvHsXG7iR7tFOLpeWJPWgkNdjVzHY16RXKD1xLae8pONFJ9rrlwmQiKJmI9oZ3h 96HJkXNzQDP2jleARY34C4CHRdNvq2MCtP7ap597xFd3nInIf42mG7tjznwAc8WYTdOq rEXEC24JSPGLtU8XvyXcWA42WVWT3Go0sBfI8= Received: by 10.50.213.6 with SMTP id no6mr35118624igc.51.1322142571012; Thu, 24 Nov 2011 05:49:31 -0800 (PST) Received: from luna.wi.rr.com (cpe-184-58-138-79.wi.res.rr.com. [184.58.138.79]) by mx.google.com with ESMTPS id ai7sm48948518igc.0.2011.11.24.05.49.30 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 24 Nov 2011 05:49:30 -0800 (PST) From: ajtiM To: freebsd-questions@freebsd.org Date: Thu, 24 Nov 2011 07:49:21 -0600 User-Agent: KMail/1.13.7 (FreeBSD/9.0-RC2; KDE/4.7.3; i386; ; ) MIME-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <201111240749.21597.lumiwa@gmail.com> Subject: kvm_getenw X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 13:49:32 -0000 Hi! I had the same problem on FreeBSD 8.2 Release as I have now on 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 12 18:09:11 UTC 2011 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386: console-kit-daemon[1800]: WARNING: kvm_getenvv failed: cannot open /proc /84597/mem In /etc/fstab I have a line: # Device Mountpoint FStype Options Dump Pass # --------- ------------------ ----------- ----------- --------- linproc /compat/linux/proc linprocfs rw 0 0 and in /etc/rc.conf is linux_enable="YES" "mount" shows: linprocfs on /compat/linux/proc (linprocfs, local) I use KDE4 not GNOME. How is possiblle to correct the problem, please? Thanks in advance. Mitja -------- http://jpgmag.com/people/lumiwa From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 14:05:34 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A6406106566C for ; Thu, 24 Nov 2011 14:05:34 +0000 (UTC) (envelope-from martin@dc.cis.okstate.edu) Received: from x.it.okstate.edu (x.it.okstate.edu [139.78.2.13]) by mx1.freebsd.org (Postfix) with ESMTP id 7B4428FC0A for ; Thu, 24 Nov 2011 14:05:34 +0000 (UTC) Received: from dc.cis.okstate.edu (localhost [127.0.0.1]) by x.it.okstate.edu (8.14.4/8.14.4) with ESMTP id pAOE5Xw9026028 for ; Thu, 24 Nov 2011 08:05:33 -0600 (CST) (envelope-from martin@dc.cis.okstate.edu) Message-Id: <201111241405.pAOE5Xw9026028@x.it.okstate.edu> To: "freebsd-questions@freebsd.org" Date: Thu, 24 Nov 2011 08:05:33 -0600 From: Martin McCormick Subject: Re: Rsync and Preservation of Ownership and Permissions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 14:05:34 -0000 Michael Sierchio writes: > Does the same user exist on the remote system, with the same uid, etc.? Yes. > If you're using rsync with ssh as the transport, and connecting to the > remote machine as the backups user, that's who will own the files on > its local filesystem... I thought rsync had some encoding it might slip in to the tree that another rsync run as root on the recovering system could use to figure out all those thousands of ownerships and get them all straight, but this makes perfect sense. > You've written a lot of narrative, but show us precisely what commands > you're running. Why would you run the command as root, and ssh as > backups, when you want them to be owned by "normal" ? Because root is the only user who can "see" files from all other users so root starts the process. Here is what I tried. Remember, folks, this will not work! This tries to backup a system named z. ##!/bin/sh #rsync --delete -alHvq --exclude "/proc" // backups@backup-server.okstate.edu:z > You can run the command as root, and use restricted ssh keys (use > authorized_keys to restrict it to executing a specific rsync > command).... you can run rsync as a regular user to that user's > account on the remote system... perryh@pluto.rain.com writes: > Perhaps you could have rsync log in to a jail on the backup server, > where it could safely be granted root permission. Hmm. It's all rather clear, now. A jailed environment that looks like root is about the only thing that could work. Thank you. From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 14:40:01 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 021AD106566C for ; Thu, 24 Nov 2011 14:40:00 +0000 (UTC) (envelope-from brett@lariat.net) Received: from lariat.net (lariat.net [66.62.230.51]) by mx1.freebsd.org (Postfix) with ESMTP id B1BB38FC08 for ; Thu, 24 Nov 2011 14:40:00 +0000 (UTC) Received: from WildRover.lariat.net (IDENT:ppp1000.lariat.net@lariat.net [66.119.58.2] (may be forged)) by lariat.net (8.9.3/8.9.3) with ESMTP id HAA07258 for ; Thu, 24 Nov 2011 07:39:58 -0700 (MST) Message-Id: <201111241439.HAA07258@lariat.net> X-Mailer: QUALCOMM Windows Eudora Version 7.1.0.9 Date: Thu, 24 Nov 2011 07:39:18 -0700 To: questions@freebsd.org From: Brett Glass Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Cc: Subject: Quick build of stripped-down kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 14:40:01 -0000 Everyone: Happy Thanksgiving! This week, I've been building FreeBSD 9.0-RC2 kernels for various machines, and on some of the older and slower ones it's been taking quite a long time. One of the reasons for this is that even if you strip 98% of the drivers out of the kernel, they are all still built as loadable modules. The machines in question will NEVER use those modules, so it's a waste of time and disk space. How hard would it be to create a build target for "make" that would avoid building the loadable modules and just leave them out of the directory where the new kernel is placed after installation? I am not intimately familiar with the cascade of makefiles that does the build.... I could probably figure out what to tweak, but if someone who is expert in this can help it would be appreciated. It would save me countless hours. --Brett Glass From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 15:01:14 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CCEB11065743 for ; Thu, 24 Nov 2011 15:01:14 +0000 (UTC) (envelope-from freebsd-questions@m.gmane.org) Received: from lo.gmane.org (lo.gmane.org [80.91.229.12]) by mx1.freebsd.org (Postfix) with ESMTP id 8934F8FC0C for ; Thu, 24 Nov 2011 15:01:14 +0000 (UTC) Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1RTanY-0008Ci-S4 for freebsd-questions@freebsd.org; Thu, 24 Nov 2011 16:01:12 +0100 Received: from pool-173-79-99-96.washdc.fios.verizon.net ([173.79.99.96]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 24 Nov 2011 16:01:12 +0100 Received: from nightrecon by pool-173-79-99-96.washdc.fios.verizon.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 24 Nov 2011 16:01:12 +0100 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-questions@freebsd.org From: Michael Powell Date: Thu, 24 Nov 2011 10:00:59 -0500 Lines: 30 Message-ID: References: <201111241439.HAA07258@lariat.net> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7Bit X-Complaints-To: usenet@dough.gmane.org X-Gmane-NNTP-Posting-Host: pool-173-79-99-96.washdc.fios.verizon.net Subject: Re: Quick build of stripped-down kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: nightrecon@hotmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 15:01:14 -0000 Brett Glass wrote: > Everyone: > > Happy Thanksgiving! This week, I've been building FreeBSD 9.0-RC2 > kernels for various machines, and on some of the older and slower > ones it's been taking quite a long time. One of the reasons for > this is that even if you strip 98% of the drivers out of the > kernel, they are all still built as loadable modules. The machines > in question will NEVER use those modules, so it's a waste of time > and disk space. > > How hard would it be to create a build target for "make" that would > avoid building the loadable modules and just leave them out of the > directory where the new kernel is placed after installation? I am > not intimately familiar with the cascade of makefiles that does the > build.... I could probably figure out what to tweak, but if someone > who is expert in this can help it would be appreciated. It would > save me countless hours. > Unless the man pages are out of date and inaccurate this used to be done with make.conf and NO_MODULES. I thought this had been moved into src.conf, but I don't see it in the man page for src.conf. man make.conf for details, as it is also possible to control which modules you want or do not want built as well. -Mike From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 15:17:13 2011 Return-Path: Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B008E106564A for ; Thu, 24 Nov 2011 15:17:13 +0000 (UTC) (envelope-from bf1783@googlemail.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 4AA288FC12 for ; Thu, 24 Nov 2011 15:17:12 +0000 (UTC) Received: by faap15 with SMTP id p15so4318851faa.13 for ; Thu, 24 Nov 2011 07:17:12 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=gamma; h=mime-version:reply-to:date:message-id:subject:from:to:content-type; bh=Vp8JSHx1oWsACO4GJ+NogKFNHJB47YJQGDbXGTAoxqM=; b=CYcrVHzOMq0vZm5OhzgS/wzm0/n0+LosUlMLQ0Ud4gJuGw7IE05cv3LG70WxstDWc4 qlhBX9F4t1jP0whEudA4PLna/UvFksj/N3vs5k826kIkHMO/hbOAgquRZgwguUUieDG4 pgm58IMY/hjo8SoIt/ZdpBeg/N1Hl8uvN51Z4= MIME-Version: 1.0 Received: by 10.180.7.198 with SMTP id l6mr29569880wia.3.1322147831368; Thu, 24 Nov 2011 07:17:11 -0800 (PST) Received: by 10.180.94.131 with HTTP; Thu, 24 Nov 2011 07:17:11 -0800 (PST) Date: Thu, 24 Nov 2011 15:17:11 +0000 Message-ID: From: "b. f." To: freebsd-questions@FreeBSD.org, Brett Glass Content-Type: text/plain; charset=ISO-8859-1 Cc: Subject: Re: Quick build of stripped-down kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: bf1783@gmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 15:17:13 -0000 > Happy Thanksgiving! This week, I've been building FreeBSD 9.0-RC2 And to you, too. > kernels for various machines, and on some of the older and slower > ones it's been taking quite a long time. One of the reasons for > this is that even if you strip 98% of the drivers out of the > kernel, they are all still built as loadable modules. The machines > in question will NEVER use those modules, so it's a waste of time > and disk space. > > How hard would it be to create a build target for "make" that would > avoid building the loadable modules and just leave them out of the > directory where the new kernel is placed after installation? I am > not intimately familiar with the cascade of makefiles that does the > build.... I could probably figure out what to tweak, but if someone > who is expert in this can help it would be appreciated. It would > save me countless hours. If you are going to build most of the modules, but only want to exclude a few, then add the directories of the modules to be excluded (relative to /usr/src/sys/modules) to WITHOUT_MODULES, for example in /etc/make.conf. If you are only going to build a few modules, and want to exclude the majority of the modules, then add the directories of the modules that are to be built to MODULES_OVERRIDE. For no modules at all, set NO_MODULES. See /usr/src/sys/modules/Makefile and /usr/src/sys/conf/kern.post.mk for details. You may also save some time by using one of your faster machines to build the OS for the slower machines. b. From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 15:23:15 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 649D9106566B for ; Thu, 24 Nov 2011 15:23:15 +0000 (UTC) (envelope-from Albert.Shih@obspm.fr) Received: from spock-ext.obspm.fr (spock-ext.obspm.fr [145.238.186.3]) by mx1.freebsd.org (Postfix) with ESMTP id 08FFF8FC0A for ; Thu, 24 Nov 2011 15:23:14 +0000 (UTC) Received: from pcjas.obspm.fr (pcjas.obspm.fr [145.238.184.233]) by spock-ext.obspm.fr (8.14.3/8.14.3/DIO Observatoire de Paris - 15/04/10) with ESMTP id pAOF910K012657 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT) for ; Thu, 24 Nov 2011 16:09:03 +0100 Date: Thu, 24 Nov 2011 16:09:01 +0100 From: Albert Shih To: questions@freebsd.org Message-ID: <20111124150901.GK87561@pcjas.obspm.fr> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.5.21 (2010-09-15) X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.3.4 (spock-ext.obspm.fr [145.238.186.20]); Thu, 24 Nov 2011 16:09:03 +0100 (CET) X-Virus-Scanned: clamav-milter 0.97.3 at spock-ext.obspm.fr X-Virus-Status: Clean Cc: Subject: 7.4 -> 8.2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 15:23:15 -0000 Hi all Almost classic question about updating from 7.4 to 8.2. Anyone known if I can temporally run a 7.4 userland+service with 8.2 kernel ? I've ask this because I've ~ 15 jail on one server. I can update the «host» pretty fast but with the 15 jail I need some time. And I would like to known if durring this time the jail going to work «normally». Regards. -- Albert SHIH DIO batiment 15 Observatoire de Paris 5 Place Jules Janssen 92195 Meudon Cedex Téléphone : 01 45 07 76 26/06 86 69 95 71 Heure local/Local time: jeu 24 nov 2011 16:06:49 CET From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 15:44:03 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 97EE9106566B for ; Thu, 24 Nov 2011 15:44:03 +0000 (UTC) (envelope-from roberthuff@rcn.com) Received: from smtp02.lnh.mail.rcn.net (smtp02.lnh.mail.rcn.net [207.172.157.102]) by mx1.freebsd.org (Postfix) with ESMTP id 574598FC08 for ; Thu, 24 Nov 2011 15:44:02 +0000 (UTC) Received: from mr16.lnh.mail.rcn.net ([207.172.157.36]) by smtp02.lnh.mail.rcn.net with ESMTP; 24 Nov 2011 10:44:02 -0500 Received: from smtp04.lnh.mail.rcn.net (smtp04.lnh.mail.rcn.net [207.172.157.104]) by mr16.lnh.mail.rcn.net (MOS 4.3.3-GA) with ESMTP id BKZ83842; Thu, 24 Nov 2011 10:44:01 -0500 Received: from 209-6-86-84.c3-0.smr-ubr2.sbo-smr.ma.cable.rcn.com (HELO jerusalem.litteratus.org.litteratus.org) ([209.6.86.84]) by smtp04.lnh.mail.rcn.net with ESMTP; 24 Nov 2011 10:44:01 -0500 From: Robert Huff MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <20174.26176.829562.460613@jerusalem.litteratus.org> Date: Thu, 24 Nov 2011 10:44:00 -0500 To: Albert Shih In-Reply-To: <20111124150901.GK87561@pcjas.obspm.fr> References: <20111124150901.GK87561@pcjas.obspm.fr> X-Mailer: VM 7.17 under 21.5 (beta28) "fuki" XEmacs Lucid X-Junkmail-Whitelist: YES (by domain whitelist at mr16.lnh.mail.rcn.net) Cc: questions@freebsd.org Subject: 7.4 -> 8.2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 15:44:03 -0000 Albert Shih writes: > Anyone known if I can temporally run a 7.4 userland+service with > 8.2 kernel? My gut reaction was "Are you familiar with the game of Russian Roulette?". Robert Huff From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 15:47:31 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 64D8E1065784 for ; Thu, 24 Nov 2011 15:47:31 +0000 (UTC) (envelope-from Albert.Shih@obspm.fr) Received: from spock-ext.obspm.fr (spock-ext.obspm.fr [145.238.186.3]) by mx1.freebsd.org (Postfix) with ESMTP id 0683F8FC15 for ; Thu, 24 Nov 2011 15:47:30 +0000 (UTC) Received: from pcjas.obspm.fr (pcjas.obspm.fr [145.238.184.233]) by spock-ext.obspm.fr (8.14.3/8.14.3/DIO Observatoire de Paris - 15/04/10) with ESMTP id pAOFlSwP009709 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Thu, 24 Nov 2011 16:47:29 +0100 Date: Thu, 24 Nov 2011 16:47:28 +0100 From: Albert Shih To: Robert Huff Message-ID: <20111124154728.GS87561@pcjas.obspm.fr> References: <20111124150901.GK87561@pcjas.obspm.fr> <20174.26176.829562.460613@jerusalem.litteratus.org> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20174.26176.829562.460613@jerusalem.litteratus.org> User-Agent: Mutt/1.5.21 (2010-09-15) X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.3.4 (spock-ext.obspm.fr [145.238.186.20]); Thu, 24 Nov 2011 16:47:29 +0100 (CET) X-Virus-Scanned: clamav-milter 0.97.3 at spock-ext.obspm.fr X-Virus-Status: Clean Cc: questions@freebsd.org Subject: Re: 7.4 -> 8.2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 15:47:31 -0000 Le 24/11/2011 à 10:44:00-0500, Robert Huff a écrit > > Albert Shih writes: > > > Anyone known if I can temporally run a 7.4 userland+service with > > 8.2 kernel? > > My gut reaction was "Are you familiar with the game of Russian > Roulette?". I see this thing in lot of movies, but no personally I'm a little coward and don't really play this kind of game ;-) But thanks I understand you answer :-) Regards. -- Albert SHIH DIO batiment 15 Observatoire de Paris 5 Place Jules Janssen 92195 Meudon Cedex Téléphone : 01 45 07 76 26/06 86 69 95 71 Heure local/Local time: jeu 24 nov 2011 16:45:54 CET From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 15:52:53 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B9B441065676 for ; Thu, 24 Nov 2011 15:52:53 +0000 (UTC) (envelope-from dan@slightlystrange.org) Received: from catflap.slightlystrange.org (client-81-107-130-62.midd.adsl.virginmedia.com [81.107.130.62]) by mx1.freebsd.org (Postfix) with ESMTP id 635798FC15 for ; Thu, 24 Nov 2011 15:52:53 +0000 (UTC) Received: from dan by catflap.slightlystrange.org with local (Exim 4.77 (FreeBSD)) (envelope-from ) id 1RTb8D-0006li-4N for freebsd-questions@freebsd.org; Thu, 24 Nov 2011 15:22:33 +0000 Date: Thu, 24 Nov 2011 15:22:33 +0000 From: Daniel Bye To: freebsd-questions@freebsd.org Message-ID: <20111124152232.GG2554@catflap.slightlystrange.org> Mail-Followup-To: freebsd-questions@freebsd.org References: <201111240749.21597.lumiwa@gmail.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="0QFb0wBpEddLcDHQ" Content-Disposition: inline In-Reply-To: <201111240749.21597.lumiwa@gmail.com> User-Agent: Mutt/1.4.2.3i X-PGP-Fingerprint: D349 B109 0EB8 2554 4D75 B79A 8B17 F97C 1622 166A X-Operating-System: FreeBSD 9.0-PRERELEASE amd64 Sender: Daniel Bye Subject: Re: kvm_getenw X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Daniel Bye List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 15:52:53 -0000 --0QFb0wBpEddLcDHQ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Nov 24, 2011 at 07:49:21AM -0600, ajtiM wrote: > Hi! >=20 > I had the same problem on FreeBSD 8.2 Release as I have now on > 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 12 18:09:11 UTC 2011 =20 > root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386: >=20 > console-kit-daemon[1800]: WARNING: kvm_getenvv failed: cannot open /proc > /84597/mem=20 >=20 > In /etc/fstab I have a line: >=20 > # Device Mountpoint FStype Options Dump Pass > # --------- ------------------ ----------- ----------- --------- > linproc /compat/linux/proc linprocfs rw 0 0 >=20 > and in /etc/rc.conf is linux_enable=3D"YES" >=20 > "mount" shows:=20 > linprocfs on /compat/linux/proc (linprocfs, local) >=20 > I use KDE4 not GNOME. How is possiblle to correct the problem, please? Try mounting the native procfs, as well: procfs /proc procfs rw 0 0 The linprocfs is for binaries running under the Linux subsystem, which almost certainly does not include your (native) KDE apps. Dan --=20 Daniel Bye _ ASCII ribbon campaign ( ) - against HTML, vCards and X - proprietary attachments in e-mail / \ --0QFb0wBpEddLcDHQ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (FreeBSD) iEYEARECAAYFAk7OYTgACgkQixf5fBYiFmoiPQCgvofOp5zOKhMz2WQfWZz1HMmV XKMAniClcqNa+mAILJmmeB8elSCrB5gZ =TYT5 -----END PGP SIGNATURE----- --0QFb0wBpEddLcDHQ-- From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 16:14:26 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3F4A2106564A for ; Thu, 24 Nov 2011 16:14:26 +0000 (UTC) (envelope-from pldrouin@gmail.com) Received: from mail-pz0-f44.google.com (mail-pz0-f44.google.com [209.85.210.44]) by mx1.freebsd.org (Postfix) with ESMTP id 198448FC08 for ; Thu, 24 Nov 2011 16:14:25 +0000 (UTC) Received: by pzk33 with SMTP id 33so1617197pzk.3 for ; Thu, 24 Nov 2011 08:14:25 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=c3rK+/DfB6xiNsFXHCqk6IcDtJxTANQ4zruybRUDl0o=; b=a8yhp7HkIVdXYIM0gZWzF5H/57Ksyx2pE/M4or6192mWX34NiA3CRJHq22zJPaJ8/D 3qettJr79FOaBpcj5IIKJLPnqX7FbF6hKO+gCXY/ZVnNiOKKgj9xi0FnqlW6JFtJAfON myBmMdE/cc5ITzCso3oPzTR5V1qws8csAJpkA= MIME-Version: 1.0 Received: by 10.68.13.103 with SMTP id g7mr18234172pbc.59.1322149837173; Thu, 24 Nov 2011 07:50:37 -0800 (PST) Sender: pldrouin@gmail.com Received: by 10.68.51.227 with HTTP; Thu, 24 Nov 2011 07:50:37 -0800 (PST) In-Reply-To: <20174.26176.829562.460613@jerusalem.litteratus.org> References: <20111124150901.GK87561@pcjas.obspm.fr> <20174.26176.829562.460613@jerusalem.litteratus.org> Date: Thu, 24 Nov 2011 10:50:37 -0500 X-Google-Sender-Auth: haUpdymuBrSxoqmAQDqNpGnC_hc Message-ID: From: Pierre-Luc Drouin To: Albert Shih Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: questions@freebsd.org Subject: Re: 7.4 -> 8.2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 16:14:26 -0000 On Thu, Nov 24, 2011 at 10:44 AM, Robert Huff wrote: > > Albert Shih writes: > >> =A0Anyone known if I can temporally run a 7.4 userland+service with >> =A08.2 kernel? > > =A0 =A0 =A0 =A0My gut reaction was "Are you familiar with the game of Rus= sian > Roulette?". > > > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0Robert Huf= f > I would definitely test it on another machine beforehand, including tests of the services which are running in the jails. It would probably be safer to make a copy of the drive from that server, put it on another machine, upgrade everything, then take the server offline, rsync the user data and swap the drives... Pierre-Luc Drouin From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 16:32:22 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 64B8B106566C for ; Thu, 24 Nov 2011 16:32:22 +0000 (UTC) (envelope-from fernando.apesteguia@gmail.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id F17678FC26 for ; Thu, 24 Nov 2011 16:32:20 +0000 (UTC) Received: by faap15 with SMTP id p15so4402263faa.13 for ; Thu, 24 Nov 2011 08:32:20 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type:content-transfer-encoding; bh=nKPpB66WR15DZyWBe3AvnLMDCYTRggKp+7Se1k9cWTE=; b=NDc2HF46lbu7Ujs06v71Zb1TWoZ/Eixm8G5pcOCslluFhh2GxT5BmKlSGoMP7IyAMP 7pCc13x40CN/kRpCmuAWcSBC7jX6r3uR6/Xe2vp3EPYKb1qT6lobP+07IVvXkJJXzx5V G/5a2TLO/DYhK41HzU5EBjruTGZmGrsjhTsQk= MIME-Version: 1.0 Received: by 10.152.104.1 with SMTP id ga1mr17815977lab.40.1322150482836; Thu, 24 Nov 2011 08:01:22 -0800 (PST) Received: by 10.152.41.198 with HTTP; Thu, 24 Nov 2011 08:01:22 -0800 (PST) In-Reply-To: <20111124152232.GG2554@catflap.slightlystrange.org> References: <201111240749.21597.lumiwa@gmail.com> <20111124152232.GG2554@catflap.slightlystrange.org> Date: Thu, 24 Nov 2011 17:01:22 +0100 Message-ID: From: =?ISO-8859-1?Q?Fernando_Apestegu=EDa?= To: Daniel Bye , freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: Subject: Re: kvm_getenw X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 16:32:22 -0000 On Thu, Nov 24, 2011 at 4:22 PM, Daniel Bye wrote: > On Thu, Nov 24, 2011 at 07:49:21AM -0600, ajtiM wrote: >> Hi! >> >> I had the same problem on FreeBSD 8.2 Release as I have now on >> 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 12 18:09:11 UTC 2011 >> root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC =A0i386: >> >> console-kit-daemon[1800]: WARNING: kvm_getenvv failed: cannot open /proc >> /84597/mem >> >> In /etc/fstab I have a line: >> >> # Device =A0 =A0 Mountpoint =A0 =A0 =A0 =A0 =A0FStype =A0 =A0 =A0 Option= s =A0 =A0 =A0Dump Pass >> # --------- =A0------------------ =A0----------- =A0----------- =A0-----= ---- >> linproc =A0 =A0 =A0/compat/linux/proc =A0linprocfs =A0 =A0rw =A0 =A0 =A0= =A0 =A0 0 =A0 =A00 >> >> and in /etc/rc.conf is linux_enable=3D"YES" >> >> "mount" shows: >> linprocfs on /compat/linux/proc (linprocfs, local) >> >> I use KDE4 not GNOME. How is possiblle to correct the problem, please? > > Try mounting the native procfs, as well: > > procfs =A0 =A0 =A0 =A0 =A0/proc =A0 =A0 =A0 =A0 =A0 procfs =A0rw =A0 =A0 = =A00 =A0 =A0 =A0 0 > > The linprocfs is for binaries running under the Linux subsystem, which > almost certainly does not include your (native) KDE apps. That should fix it. Have a look at this[1]. I was helped to solve a similar problem. Cheers. [1] http://lists.freebsd.org/pipermail/freebsd-gnome/2010-August/024761.htm= l > > Dan > > -- > Daniel Bye > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 _ > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0ASCII ribbon campaign ( ) > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 - against HTML, vCards and =A0X > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0- propriet= ary attachments in e-mail / \ > From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 16:47:53 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 50AB21065799 for ; Thu, 24 Nov 2011 16:47:53 +0000 (UTC) (envelope-from bsd@todoo.biz) Received: from newmail.rmm.fr (newmail.rmm.fr [87.98.206.99]) by mx1.freebsd.org (Postfix) with ESMTP id 480438FC0C for ; Thu, 24 Nov 2011 16:47:52 +0000 (UTC) Received: from newmail.rmm.fr (localhost [127.0.0.1]) by newmail.rmm.fr (Postfix) with ESMTP id 647CF78C5E for ; Thu, 24 Nov 2011 17:47:50 +0100 (CET) X-Virus-Scanned: amavisd-new 2.7.0 (20110701) at rmm.fr Received: from newmail.rmm.fr ([127.0.0.1]) by newmail.rmm.fr (newmail.rmm.fr [127.0.0.1]) (amavisd-new, port 10026) with ESMTP id DvPJWfYeEx9Q for ; Thu, 24 Nov 2011 17:47:50 +0100 (CET) Received: from newmail.rmm.fr (newmail.rmm.fr [87.98.206.99]) (using TLSv1 with cipher AES128-SHA (128/128 bits)) (No client certificate requested) (Authenticated sender: hidden) by newmail.rmm.fr (Postfix) with ESMTPSA id D0A0878C58 for ; Thu, 24 Nov 2011 17:47:49 +0100 (CET) From: bsd Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Date: Thu, 24 Nov 2011 17:47:49 +0100 Message-Id: To: Liste FreeBSD Mime-Version: 1.0 (Apple Message framework v1084) X-Mailer: Apple Mail (2.1084) Subject: Problem with uart interfaces X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 16:47:53 -0000 Hello,=20 I have a serious problem with LAN bypass.=20 I am configuring a new appliance which embeddeds a LAN bypass on four = ethernet cards.=20 When the system boots, it freezes at the stage of uart interface = detection :=20 > Consoles: internal video/keyboard serial port > BIOS drive C: is disk0 > BIOS 631kB/2085632kB available memory >=20 > FreeBSD/i386 bootstrap loader, Revision 1.1 > (root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org, Sat Sep 3 19:36:15 = EDT 2011) > Loading /boot/defaults/loader.conf > /boot/kernel/kernel text=3D0x8a1d58 data=3D0x3c9e94+0x9b6a0 = syms=3D[0x4+0x94100+0x4+0xcaf47] > \ >=20 >=20 > ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD? > 3 3 > 3 3 > 3 3 > 3 Welcome to pfSense! 3 > 3 3 ______ > 3 3 / \ > 3 1. Boot pfSense [default] 3 _____/ f \ > 3 2. Boot pfSense with ACPI disabled 3 / \ / > 3 3. Boot pfSense using USB device 3 / p \______/ = Sense > 3 4. Boot pfSense in Safe Mode 3 \ / \ > 3 5. Boot pfSense in single user mode 3 \_____/ \ > 3 6. Boot pfSense with verbose logging 3 \ / > 3 7. Escape to loader prompt 3 \______/ > 3 8. Reboot 3 > 3 3 > 3 3 > 3 3 > 3 Select option, [Enter] for default 3 > 3 or [Space] to pause timer 0 3 > @DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDY >=20 >=20 > Copyright (c) 1992-2010 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.1-RELEASE-p4 #0: Sat Sep 3 20:00:14 EDT 2011 > = root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/sr= c/sys/pfSense_wrap.8.i386 i386 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1795.51-MHz 686-class = CPU) > Origin =3D "GenuineIntel" Id =3D 0x106ca Family =3D 6 Model =3D = 1c Stepping =3D 10 > = Features=3D0xbfebfbff > = Features2=3D0x40e31d > AMD Features=3D0x20100000 > AMD Features2=3D0x1 > TSC: P-state invariant > real memory =3D 2147483648 (2048 MB) > avail memory =3D 2076377088 (1980 MB) > ACPI APIC Table: > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP/HT): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP/HT): APIC ID: 3 > ioapic0 irqs 0-23 on motherboard > netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device = polling > wlan: mac acl policy registered > ipw_bss: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. > ipw_bss: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. > module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0710010, 0) error 1 > ipw_ibss: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. > ipw_ibss: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. > module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07100b0, 0) error 1 > wpi: You need to read the LICENSE file in = /usr/share/doc/legal/intel_wpi/. > wpi: If you agree with the license, set legal.intel_wpi.license_ack=3D1 = in /boot/loader.conf. > module_register_init: MOD_LOAD (wpi_fw, 0xc0883050, 0) error 1 > ipw_monitor: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. > ipw_monitor: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. > module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0710150, 0) error 1 > cryptosoft0: on motherboard > padlock0: No ACE support. > acpi0: on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: on acpi0 > cpu1: on acpi0 > cpu2: on acpi0 > cpu3: on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > vgapci0: port 0x1c10-0x1c17 mem = 0xf0700000-0xf077ffff,0xd0000000-0xdfffffff,0xf0000000-0xf00fffff irq 16 = at device 2.0 on pci0 > vgapci1: mem 0xf0780000-0xf07fffff at device = 2.1 on pci0 > uhci0: port 0x1820-0x183f = irq 16 at device 26.0 on pci0 > uhci0: [ITHREAD] > usbus0: on uhci0 > uhci1: port 0x1840-0x185f = irq 21 at device 26.1 on pci0 > uhci1: [ITHREAD] > usbus1: on uhci1 > ehci0: mem = 0xf0a01000-0xf0a013ff irq 18 at device 26.7 on pci0 > ehci0: [ITHREAD] > usbus2: EHCI version 1.0 > usbus2: on ehci0 > pcib1: irq 16 at device 28.0 on pci0 > pci5: on pcib1 > em0: port 0x2000-0x201f = mem 0xf0120000-0xf013ffff,0xf0100000-0xf0103fff irq 16 at device 0.0 on = pci5 > em0: Using an MSI interrupt > em0: [FILTER] > pcib2: irq 17 at device 28.1 on pci0 > pci7: on pcib2 > em1: port 0x3000-0x301f = mem 0xf0200000-0xf021ffff,0xf0220000-0xf0223fff irq 17 at device 0.0 on = pci7 > em1: Using an MSI interrupt > em1: [FILTER] > pcib3: irq 18 at device 28.2 on pci0 > pci9: on pcib3 > em2: port 0x4000-0x401f = mem 0xf0320000-0xf033ffff,0xf0300000-0xf0303fff irq 18 at device 0.0 on = pci9 > em2: Using an MSI interrupt > em2: [FILTER] > pcib4: irq 19 at device 28.3 on pci0 > pci11: on pcib4 > em3: port 0x5000-0x501f = mem 0xf0400000-0xf041ffff,0xf0420000-0xf0423fff irq 19 at device 0.0 on = pci11 > em3: Using an MSI interrupt > em3: [FILTER] > pcib5: irq 16 at device 28.4 on pci0 > pci12: on pcib5 > em4: port 0x6000-0x601f = mem 0xf0520000-0xf053ffff,0xf0500000-0xf0503fff irq 16 at device 0.0 on = pci12 > em4: Using an MSI interrupt > em4: [FILTER] > pcib6: irq 17 at device 28.5 on pci0 > pci13: on pcib6 > em5: port 0x7000-0x701f = mem 0xf0600000-0xf061ffff,0xf0620000-0xf0623fff irq 17 at device 0.0 on = pci13 > em5: Using an MSI interrupt > em5: [FILTER] > uhci2: port 0x1860-0x187f = irq 23 at device 29.0 on pci0 > uhci2: [ITHREAD] > usbus3: on uhci2 > uhci3: port 0x1880-0x189f = irq 19 at device 29.1 on pci0 > uhci3: [ITHREAD] > usbus4: on uhci3 > uhci4: port 0x18a0-0x18bf = irq 18 at device 29.2 on pci0 > uhci4: [ITHREAD] > usbus5: on uhci4 > ehci1: mem = 0xf0a01400-0xf0a017ff irq 23 at device 29.7 on pci0 > ehci1: [ITHREAD] > usbus6: EHCI version 1.0 > usbus6: on ehci1 > pcib7: at device 30.0 on pci0 > pci17: on pcib7 > em6: port = 0x8000-0x803f mem 0xf0b20000-0xf0b3ffff,0xf0b00000-0xf0b1ffff irq 18 at = device 6.0 on pci17 > em6: Memory Access and/or Bus Master bits were not set! > em6: [FILTER] > em7: port = 0x8040-0x807f mem 0xf0b60000-0xf0b7ffff,0xf0b40000-0xf0b5ffff irq 19 at = device 7.0 on pci17 > em7: Memory Access and/or Bus Master bits were not set! > em7: [FILTER] > isab0: at device 31.0 on pci0 > isa0: on isab0 > atapci0: port = 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0 > ata0: on atapci0 > ata0: [ITHREAD] > atapci1: port = 0x1c40-0x1c47,0x1c34-0x1c37,0x1c38-0x1c3f,0x1c30-0x1c33,0x1c00-0x1c0f,0x18= f0-0x18ff irq 19 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata2: on atapci1 > ata2: [ITHREAD] > ata3: on atapci1 > ata3: [ITHREAD] > pci0: at device 31.3 (no driver attached) > pci0: at device 31.6 (no driver attached) > acpi_tz0: on acpi0 > ACPI Warning for \_TZ_.TZ01._AL0: Return Package type mismatch at = index 0 - found [NULL Object Descriptor], expected Reference = (20100331/nspredef-1197) > acpi_button0: on acpi0 > atrtc0: port 0x70-0x71 irq 8 on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on = acpi0 > uart0: [FILTER] > uart0: console (9600,n,8,1) > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > uart1: [FILTER] > uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0 > uart2: [FILTER] > uart3: <16550 or compatible> port 0x2e8-0x2ef irq 7 on acpi0 > uart3: [FILTER] After nothing, the system is frozen with no option to act on It.=20 Reboot necessary !=20 I am using pfSense v.2.0-Release which is based on 8.1 version of FBSD.=20= =20 Hardware is as follow :=20 Processor: =E2=80=A7 Intel Dual- Core D525 1.8 GHz Processor Memory: =E2=80=A7 2x 204- pin SO-DIMM sockets, up to 4GB of DDR-3 Ethernet: =E2=80=A7 6x PCI- E I/F LAN ports (Intel 82583 v GbE controller) =E2=80=A7 2x PCI I/F LAN ports ( Intel 82541 PI GbE controller) LAN By-Pass Function: =E2=80=A7 2x pairs of PCI-E GbE ports support =E2=80=A7 By- pass Enable/ Disable option =E2=80=A7 By- pass Preset option =E2=80=A7 By- pass Setup option Any advise on how to solve this issue will be=E2=80=A6 most welcome !!!=20= Thanks=20 = =E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2= =80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80= =93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93= =E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2= =80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80= =93=E2=80=93=E2=80=93=E2=80=93=E2=80=93 ---------> Gr=C3=A9gory Bernard Director <--------- ---------------> www.osnet.eu <--------------- --> Your provider of OpenSource appliances <-- = =E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2= =80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80= =93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93= =E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2= =80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80= =93=E2=80=93=E2=80=93=E2=80=93=E2=80=93 OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 17:46:00 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4F5B01065670 for ; Thu, 24 Nov 2011 17:46:00 +0000 (UTC) (envelope-from doug@safeport.com) Received: from fledge.watson.org (fledge.watson.org [65.122.17.41]) by mx1.freebsd.org (Postfix) with ESMTP id 0DEBB8FC16 for ; Thu, 24 Nov 2011 17:45:59 +0000 (UTC) Received: from fledge.watson.org (localhost.watson.org [127.0.0.1]) by fledge.watson.org (8.14.4/8.14.4) with ESMTP id pAOHjxuQ067955; Thu, 24 Nov 2011 12:45:59 -0500 (EST) (envelope-from doug@safeport.com) Received: from localhost (doug@localhost) by fledge.watson.org (8.14.4/8.14.4/Submit) with ESMTP id pAOHjw0i067945; Thu, 24 Nov 2011 12:45:58 -0500 (EST) (envelope-from doug@safeport.com) X-Authentication-Warning: fledge.watson.org: doug owned process doing -bs Date: Thu, 24 Nov 2011 12:45:58 -0500 (EST) From: doug@safeport.com X-X-Sender: doug@fledge.watson.org To: Pierre-Luc Drouin In-Reply-To: Message-ID: References: <20111124150901.GK87561@pcjas.obspm.fr> <20174.26176.829562.460613@jerusalem.litteratus.org> User-Agent: Alpine 2.00 (BSF 1167 2008-08-23) MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="621616949-2127864703-1322156758=:66833" X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.3 (fledge.watson.org [127.0.0.1]); Thu, 24 Nov 2011 12:45:59 -0500 (EST) Cc: Albert Shih , questions@freebsd.org Subject: Re: 7.4 -> 8.2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: doug@fledge.watson.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 17:46:00 -0000 This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. --621616949-2127864703-1322156758=:66833 Content-Type: TEXT/PLAIN; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8BIT On Thu, 24 Nov 2011, Pierre-Luc Drouin wrote: > On Thu, Nov 24, 2011 at 10:44 AM, Robert Huff wrote: >> >> Albert Shih writes: >> >>>  Anyone known if I can temporally run a 7.4 userland+service with >>>  8.2 kernel? >> >>        My gut reaction was "Are you familiar with the game of Russian >> Roulette?". >> >> >>                                Robert Huff >> > > I would definitely test it on another machine beforehand, including > tests of the services which are running in the jails. It would > probably be safer to make a copy of the drive from that server, put it > on another machine, upgrade everything, then take the server offline, > rsync the user data and swap the drives... Testing seems like a good idea. Include "COMPAT_FREEBSD7" in you 8.2 kernel --621616949-2127864703-1322156758=:66833-- From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 17:39:58 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7C1B9106574F for ; Thu, 24 Nov 2011 17:39:58 +0000 (UTC) (envelope-from terrence@mediamonks.net) Received: from mail.mediamonks.net (mail.mediamonks.net [217.195.117.200]) by mx1.freebsd.org (Postfix) with ESMTP id 0FBE08FC1E for ; Thu, 24 Nov 2011 17:39:57 +0000 (UTC) X-CGP-Sophos: Scanned and found clean X-Abuse-Info: Send abuse reports about this email to abuse@mediamonks.net Received: from [145.99.104.70] (account terrence@mediamonks.com) by mail.mediamonks.net (CommuniGate Pro IMAP 5.4.2) with XMIT id 8113615; Thu, 24 Nov 2011 18:39:56 +0100 Date: Thu, 24 Nov 2011 18:39:54 +0100 Organization: MediaMonks B.V. Message-Id: <2a449d3a0a37ab479c97962b436bb95c@mediamonks.net> In-Reply-To: <201111241439.HAA07258@lariat.net> MIME-Version: 1.0 Thread-Topic: Quick build of stripped-down kernel Priority: Normal Importance: normal X-MSMail-Priority: normal X-Priority: 3 Sensitivity: Normal Thread-Index: Acyq0BMTZGpb1u2EQ0WN52oG/R/erQ== From: "Terrence Koeman" To: "freebsd-questions@FreeBSD.org" X-Mailer: CommuniGate Pro MAPI Connector 1.52.54.6/1.54.0.6 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable X-Mailman-Approved-At: Thu, 24 Nov 2011 18:00:38 +0000 Cc: Brett Glass Subject: RE: Quick build of stripped-down kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 17:39:58 -0000 > -----Original Message----- > From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd- > questions@freebsd.org] On Behalf Of Brett Glass > Sent: Thursday, November 24, 2011 15:39 > > Everyone: > > Happy Thanksgiving! This week, I've been building FreeBSD 9.0-RC2 > kernels for various machines, and on some of the older and slower > ones it's been taking quite a long time. One of the reasons for > this is that even if you strip 98% of the drivers out of the > kernel, they are all still built as loadable modules. The machines > in question will NEVER use those modules, so it's a waste of time > and disk space. > > How hard would it be to create a build target for "make" that would > avoid building the loadable modules and just leave them out of the > directory where the new kernel is placed after installation? I am > not intimately familiar with the cascade of makefiles that does the > build.... I could probably figure out what to tweak, but if someone > who is expert in this can help it would be appreciated. It would > save me countless hours. > Add makeoptions NO_MODULES=3Dyes to your KERNCONF. -- Regards, T. Koeman, MTh/BSc/BPsy; Technical Monk MediaMonks B.V. (www.mediamonks.com) Please quote relevant replies in correspondence. From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 18:46:18 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A3E041065678 for ; Thu, 24 Nov 2011 18:46:18 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id 6AF2D8FC0C for ; Thu, 24 Nov 2011 18:46:18 +0000 (UTC) Received: by iakl21 with SMTP id l21so5127307iak.13 for ; Thu, 24 Nov 2011 10:46:17 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:cc:references:in-reply-to :mime-version:content-type:content-transfer-encoding:message-id; bh=zy1qxUsTKH66Kt2UzrnJ8PZx/o1+fH1fw5xUMAr0bCM=; b=FTKBWTdyLjjR9tNnySXcX+AKPMHEX3RWCRXrARvftjcgOPl+xknTubpP/UoaEBCfq9 pF+klaGU+0TrnSWm+v2USHQWrCP7s1Zcs9YBrgJ+CATRFl4zlNT/hb2ZbJOi8LFGpcBG 6CHUYKDPyw7SCyEsREZPKkt/rgpsTj6RF8Vg8= Received: by 10.50.169.99 with SMTP id ad3mr3693381igc.6.1322160377801; Thu, 24 Nov 2011 10:46:17 -0800 (PST) Received: from luna.wi.rr.com (cpe-184-58-138-79.wi.res.rr.com. [184.58.138.79]) by mx.google.com with ESMTPS id g16sm90293595ibs.8.2011.11.24.10.46.17 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 24 Nov 2011 10:46:17 -0800 (PST) From: ajtiM To: freebsd-questions@freebsd.org Date: Thu, 24 Nov 2011 12:46:09 -0600 User-Agent: KMail/1.13.7 (FreeBSD/9.0-RC2; KDE/4.7.3; i386; ; ) References: <201111240749.21597.lumiwa@gmail.com> <20111124152232.GG2554@catflap.slightlystrange.org> In-Reply-To: MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message-Id: <201111241246.09573.lumiwa@gmail.com> Cc: Daniel Bye , Fernando =?iso-8859-1?q?Apestegu=EDa?= Subject: Re: kvm_getenw X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 18:46:18 -0000 On Thursday 24 November 2011 10:01:22 Fernando Apestegu=EDa wrote: > On Thu, Nov 24, 2011 at 4:22 PM, Daniel Bye >=20 > wrote: > > On Thu, Nov 24, 2011 at 07:49:21AM -0600, ajtiM wrote: > >> Hi! > >>=20 > >> I had the same problem on FreeBSD 8.2 Release as I have now on > >> 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 12 18:09:11 UTC 2011 > >> root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386: > >>=20 > >> console-kit-daemon[1800]: WARNING: kvm_getenvv failed: cannot open /pr= oc > >> /84597/mem > >>=20 > >> In /etc/fstab I have a line: > >>=20 > >> # Device Mountpoint FStype Options Dump Pass > >> # --------- ------------------ ----------- ----------- --------- > >> linproc /compat/linux/proc linprocfs rw 0 0 > >>=20 > >> and in /etc/rc.conf is linux_enable=3D"YES" > >>=20 > >> "mount" shows: > >> linprocfs on /compat/linux/proc (linprocfs, local) > >>=20 > >> I use KDE4 not GNOME. How is possiblle to correct the problem, please? > >=20 > > Try mounting the native procfs, as well: > >=20 > > procfs /proc procfs rw 0 0 > >=20 > > The linprocfs is for binaries running under the Linux subsystem, which > > almost certainly does not include your (native) KDE apps. >=20 > That should fix it. Have a look at this[1]. I was helped to solve a > similar problem. >=20 > Cheers. >=20 > [1] > http://lists.freebsd.org/pipermail/freebsd-gnome/2010-August/024761.html >=20 > > Dan > >=20 > > -- > > Daniel Bye > > _ > > ASCII ribbon campaign ( ) > > - against HTML, vCards and X > > - proprietary attachments in e-mail / \ >=20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" Thank you very much. Mitja =2D------- http://jpgmag.com/people/lumiwa From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 19:19:21 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C4E60106566C for ; Thu, 24 Nov 2011 19:19:21 +0000 (UTC) (envelope-from apseudoutopia@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 563AC8FC0C for ; Thu, 24 Nov 2011 19:19:20 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so4299747bkb.13 for ; Thu, 24 Nov 2011 11:19:20 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; bh=Wlk7bizE1o+3HmXeHo7w4c7pprVRXrhmOdUgSOA1DRQ=; b=VzR1lTGS1vG4CD57T9/GOol5HyRGJZ8k4XeFw1eWUbEXh9FiZ1XADzrHNmjReQo4xJ 38dkzZSOJYZAl/bVbTlho3fOaz0WGwa19cfR2ZcZlHl68RNAwZRNoofLOOTAex4kdmiO EbLjCJdXz5h1308bRP9AcYDoimLJlD0QQr9XA= MIME-Version: 1.0 Received: by 10.205.120.145 with SMTP id fy17mr30950631bkc.124.1322162360125; Thu, 24 Nov 2011 11:19:20 -0800 (PST) Received: by 10.204.133.215 with HTTP; Thu, 24 Nov 2011 11:19:19 -0800 (PST) In-Reply-To: <4ECB580E.20203@infracaninophile.co.uk> References: <88f3d8e819b3420f8e61723bee90ba5e.squirrel@www.magehandbook.com> <4ECB580E.20203@infracaninophile.co.uk> Date: Thu, 24 Nov 2011 14:19:19 -0500 Message-ID: From: APseudoUtopia To: Matthew Seaman Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Cc: freebsd-questions@freebsd.org Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 19:19:21 -0000 On Tue, Nov 22, 2011 at 3:06 AM, Matthew Seaman wrote: > On 22/11/2011 02:09, APseudoUtopia wrote: >> Another quick question about swap: If I have 4 drives, with 512MB >> swap, the system uses all 4 swap partitions, correct? So it's not like >> it'd be going to waste? I'd have a total of 2 GB swap? > > Well, yes. =C2=A0If you just declare those raw partitions to be swap area= s, > that will be the case. =C2=A0However, doing this is asking for trouble: y= ou > subvert any resilience features obtained by using ZFS with raidz1. =C2=A0= If > any one of the drives fails, your swap area will break and your system > will probably crash. > > Better to set up two pairs of gmirrors for swap -- the procedure is > described here: http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/Mirror > in section3 "Finish Install." =C2=A0This will effectively give you a raid= 10 > for your swap, with a total size of 1GB. > I'm not sure I understand this. How would that negatively affect the raidz1? The swap isn't in the zpool. I understand the system may crash if the OS was using the swap space and the drive failed. But would you not be able to reboot into a degraded zpool state and still have a usable system? From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 19:27:08 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 959531065672 for ; Thu, 24 Nov 2011 19:27:08 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp6.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id 140DD8FC13 for ; Thu, 24 Nov 2011 19:27:07 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pAOJR4XI077074 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO); Thu, 24 Nov 2011 19:27:04 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pAOJR4XI077074 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1322162824; bh=3U6mtVi+mTvWRJqWxSwHjEUd10NJnAldpfrtcO5FU38=; h=Message-ID:Date:From:MIME-Version:To:CC:Subject:References: In-Reply-To:Content-Type; b=D1WujXLKiYp7XLGOrdy4adqUmZ77yhJtpr6X0wXaCXMRN5zUxD+rSSGOPhIMw3Ge+ ro7NdjjlDlXdMurtQ/x6BR+Ym3rqyzwVwgNIs3Mzg4ESPE+fYgrFdoIfRRn40IdfiA qfpe1MyJqXhx28/2R6yJ5Bco/3H1FsHQpTMR13gY= Message-ID: <4ECE9A7F.9000107@infracaninophile.co.uk> Date: Thu, 24 Nov 2011 19:26:55 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: APseudoUtopia References: <88f3d8e819b3420f8e61723bee90ba5e.squirrel@www.magehandbook.com> <4ECB580E.20203@infracaninophile.co.uk> In-Reply-To: X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig2D56C894960611D7E83C64B0" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-0.6 required=5.0 tests=BAYES_05,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Cc: freebsd-questions@freebsd.org Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 19:27:08 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig2D56C894960611D7E83C64B0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable On 24/11/2011 19:19, APseudoUtopia wrote: > On Tue, Nov 22, 2011 at 3:06 AM, Matthew Seaman > wrote: >> On 22/11/2011 02:09, APseudoUtopia wrote: >>> Another quick question about swap: If I have 4 drives, with 512MB >>> swap, the system uses all 4 swap partitions, correct? So it's not lik= e >>> it'd be going to waste? I'd have a total of 2 GB swap? >> >> Well, yes. If you just declare those raw partitions to be swap areas,= >> that will be the case. However, doing this is asking for trouble: you= >> subvert any resilience features obtained by using ZFS with raidz1. If= >> any one of the drives fails, your swap area will break and your system= >> will probably crash. >> >> Better to set up two pairs of gmirrors for swap -- the procedure is >> described here: http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/Mirror >> in section3 "Finish Install." This will effectively give you a raid10= >> for your swap, with a total size of 1GB. >> >=20 > I'm not sure I understand this. How would that negatively affect the > raidz1? The swap isn't in the zpool. I understand the system may crash > if the OS was using the swap space and the drive failed. But would you > not be able to reboot into a degraded zpool state and still have a > usable system? >=20 No -- it means a failed disk can cause your system to crash. That's not resilient behaviour. Yes, the data on the ZFS raidz1 should survive the crash and the reboot, but the point is ZFS raidz1 should be able to survive a disk failure like that /without/ a system crash. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------enig2D56C894960611D7E83C64B0 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7OmocACgkQ8Mjk52CukIyekgCdE1S4hCNEyCAmOuyuS1Z4A8NX 42cAnAmJEzIJusG1VFQPtkrXCTVSuNzR =91K0 -----END PGP SIGNATURE----- --------------enig2D56C894960611D7E83C64B0-- From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 19:29:43 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6799F1065672 for ; Thu, 24 Nov 2011 19:29:43 +0000 (UTC) (envelope-from apseudoutopia@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id EB4598FC08 for ; Thu, 24 Nov 2011 19:29:42 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so4313873bkb.13 for ; Thu, 24 Nov 2011 11:29:41 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; bh=zjYl1BT8ta9VVUKhospoZVsdVixucBRDifuQQuTd65c=; b=nqzClZq+cNrmf5vNgn6l3mBEP78sOctx/zaqCij/v8JAzUPDWRV0+LKQZk/NQkYDeZ T3YZ3EC0PWwVjWIeGJirGkin0Id4z6dqexZVldjXuL6hdEgOayk5PFLxkYQ9vzC8QJAq TtLY1tRHOQ5SfvA7tEg3KFCXBHZKI3YYHk41U= MIME-Version: 1.0 Received: by 10.205.135.129 with SMTP id ig1mr30790762bkc.106.1322162981541; Thu, 24 Nov 2011 11:29:41 -0800 (PST) Received: by 10.204.133.215 with HTTP; Thu, 24 Nov 2011 11:29:41 -0800 (PST) In-Reply-To: <4ECE9A7F.9000107@infracaninophile.co.uk> References: <88f3d8e819b3420f8e61723bee90ba5e.squirrel@www.magehandbook.com> <4ECB580E.20203@infracaninophile.co.uk> <4ECE9A7F.9000107@infracaninophile.co.uk> Date: Thu, 24 Nov 2011 14:29:41 -0500 Message-ID: From: APseudoUtopia To: Matthew Seaman Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Cc: freebsd-questions@freebsd.org Subject: Re: Setting up ZFS - Filesystem Properties and Installing on Root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 19:29:43 -0000 On Thu, Nov 24, 2011 at 2:26 PM, Matthew Seaman wrote: > On 24/11/2011 19:19, APseudoUtopia wrote: >> On Tue, Nov 22, 2011 at 3:06 AM, Matthew Seaman >> wrote: >>> On 22/11/2011 02:09, APseudoUtopia wrote: >>>> Another quick question about swap: If I have 4 drives, with 512MB >>>> swap, the system uses all 4 swap partitions, correct? So it's not like >>>> it'd be going to waste? I'd have a total of 2 GB swap? >>> >>> Well, yes. =C2=A0If you just declare those raw partitions to be swap ar= eas, >>> that will be the case. =C2=A0However, doing this is asking for trouble:= you >>> subvert any resilience features obtained by using ZFS with raidz1. =C2= =A0If >>> any one of the drives fails, your swap area will break and your system >>> will probably crash. >>> >>> Better to set up two pairs of gmirrors for swap -- the procedure is >>> described here: http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/Mirror >>> in section3 "Finish Install." =C2=A0This will effectively give you a ra= id10 >>> for your swap, with a total size of 1GB. >>> >> >> I'm not sure I understand this. How would that negatively affect the >> raidz1? The swap isn't in the zpool. I understand the system may crash >> if the OS was using the swap space and the drive failed. But would you >> not be able to reboot into a degraded zpool state and still have a >> usable system? >> > > No -- it means a failed disk can cause your system to crash. =C2=A0That's= not > resilient behaviour. =C2=A0Yes, the data on the ZFS raidz1 should survive= the > crash and the reboot, but the point is ZFS raidz1 should be able to > survive a disk failure like that /without/ a system crash. > Ah! I understand. Thank you for the explanation. From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 19:55:41 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 28175106566C for ; Thu, 24 Nov 2011 19:55:41 +0000 (UTC) (envelope-from traveling08@cox.net) Received: from fed1rmfepi108.cox.net (fed1rmfepi108.cox.net [68.230.241.139]) by mx1.freebsd.org (Postfix) with ESMTP id 018998FC15 for ; Thu, 24 Nov 2011 19:55:40 +0000 (UTC) Received: from fed1rmimpo305.cox.net ([68.230.241.173]) by fed1rmfepo202.cox.net (InterMail vM.8.01.04.00 201-2260-137-20101110) with ESMTP id <20111124193944.ONGH3766.fed1rmfepo202.cox.net@fed1rmimpo305.cox.net>; Thu, 24 Nov 2011 14:39:44 -0500 Received: from dell64 ([72.220.91.219]) by fed1rmimpo305.cox.net with bizsmtp id 17fj1i00K4jy6EY037fjgK; Thu, 24 Nov 2011 14:39:43 -0500 X-CT-Class: Clean X-CT-Score: 0.00 X-CT-RefID: str=0001.0A02020A.4ECE9D7F.00E8,ss=1,re=0.000,fgs=0 X-CT-Spam: 0 X-Authority-Analysis: v=1.1 cv=Mm7wCnmhIH1F3xzFnZSx5GfOfjmr4St7hCElUMct5Xs= c=1 sm=1 a=d5xdBJzwzI4A:10 a=G8Uczd0VNMoA:10 a=kj9zAlcOel0A:10 a=olICo1sKaMXbpqbYUd6B5g==:17 a=NRF7K_vUAAAA:8 a=IqJs70w8Yx4aI0t9JBYA:9 a=9oat72NV1hRUfpTRZmgA:7 a=CjuIK1q_8ugA:10 a=MFc6XYY7ANoA:10 a=olICo1sKaMXbpqbYUd6B5g==:117 X-CM-Score: 0.00 Authentication-Results: cox.net; none Date: Thu, 24 Nov 2011 11:39:38 -0800 From: Robert To: "Julian H. Stacey" Message-ID: <20111124113938.2d99eec2@dell64> In-Reply-To: <201111241116.pAOBGH4i098240@fire.js.berklix.net> References: <201111241116.pAOBGH4i098240@fire.js.berklix.net> X-Mailer: Claws Mail 3.7.10 (GTK+ 2.24.6; amd64-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: Invalid fdisk partition table found (fwd) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 19:55:41 -0000 On Thu, 24 Nov 2011 12:16:17 +0100 "Julian H. Stacey" wrote: > Hi, > Please keep this on list. > Hi Julian, I noticed soon after my response that I must have hit reply instead of all so I resent my information to questions@. This morning I didn't see my email to questions@ so I checked the archives and my response is there. No idea why it did not get sent out to the masses. Anyway, I am still having this problem so I will paste my response below. Julian and Warren thanks for the responses. On Wed, 23 Nov 2011 22:08:00 +0100 "Julian H. Stacey" wrote: > Robert wrote: > > Greetings > > > > [robert@dell64] ~> uname -a > > FreeBSD dell64.shasta204.local 8.2-STABLE FreeBSD 8.2-STABLE #34: > > Fri Nov 18 06:43:01 PST 2011 > > root@dell64.shasta204.local:/usr/obj/usr/src/sys/GENERIC amd64 > > > > I have two Lexar Professional 600X 16GB compact flash cards that are > > unusable. fdisk shows: > > > Is there any way I can restore these CF cards to 16GB? Any help or > > suggestions will be greatly appreciated. > > @ suggestions: > 1 Try > bsdlabel -B -w -r /dev/da1 [robert@dell64] ~> sudo bsdlabel -B -w -r /dev/da1 Password: [robert@dell64] ~> > echo unplug, reinsert Not sure if you actually wanted me to unplug and reinsert the CF card...so I did both [robert@dell64] ~> echo unplug, reinsert unplug, reinsert and physically unplugged and reinserted the CF card > newfs /dev/da1a ^ ??? [robert@dell64] ~> sudo newfs /dev/da1a newfs: /dev/da1a: could not find special device [robert@dell64] ~> sudo newfs /dev/da1 /dev/da1: 29.5MB (60480 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 7.39MB, 473 blks, 960 inodes. super-block backups (for fsck -b #) at: 160, 15296, 30432, 45568 cg 0: bad magic number [robert@dell64] ~> fdisk /dev/da1 ******* Working on device /dev/da1 ******* parameters extracted from in-core disklabel are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) parameters to be used for BIOS calculations are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) fdisk: invalid fdisk partition table found Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 32, size 59360 (28 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 28/ head 63/ sector 32 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: No change from before. > > 2 Base of _my_ man fdisk > " When running multi user, you cannot write unless you first run > this: sysctl kern.geom.debugflags=16 I had failed to mention in the original post that I had seen something in my searches about problems since 7.1. I had tried booting from an old 6.2 disk and attempted all of this under "fixit" with no luck. And also tried in single user mode. Warren, [robert@dell64] ~> sudo gpart destroy -F da1 gpart: geom 'da1': Invalid argument [robert@dell64] ~> sudo gpart create -s GPT da1 da1 created [robert@dell64] ~> sudo gpart bootcode -b /boot/pmbr da1 bootcode written to da1 [robert@dell64] ~> sudo gpart destroy -F da1 da1 destroyed [robert@dell64] ~> fdisk /dev/da1 ******* Working on device /dev/da1 ******* parameters extracted from in-core disklabel are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) parameters to be used for BIOS calculations are: cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) fdisk: invalid fdisk partition table found Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 32, size 59360 (28 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 28/ head 63/ sector 32 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: I see the flashing lights like it is writing to the CF card but nothing changes. More suggestions welcome. These are quite expensive CF cards. Thanks again Robert From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 20:14:59 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DCC6C106566C for ; Thu, 24 Nov 2011 20:14:59 +0000 (UTC) (envelope-from afmcc@btinternet.com) Received: from nm3-vm0.bt.bullet.mail.ukl.yahoo.com (nm3-vm0.bt.bullet.mail.ukl.yahoo.com [217.146.182.230]) by mx1.freebsd.org (Postfix) with SMTP id 26E4D8FC14 for ; Thu, 24 Nov 2011 20:14:58 +0000 (UTC) Received: from [217.146.183.196] by nm3.bt.bullet.mail.ukl.yahoo.com with NNFMP; 24 Nov 2011 20:01:54 -0000 Received: from [217.146.183.204] by tm2.bt.bullet.mail.ukl.yahoo.com with NNFMP; 24 Nov 2011 20:01:54 -0000 Received: from [127.0.0.1] by omp1002.bt.mail.ukl.yahoo.com with NNFMP; 24 Nov 2011 20:01:54 -0000 X-Yahoo-Newman-Id: 475535.54730.bm@omp1002.bt.mail.ukl.yahoo.com Received: (qmail 7272 invoked from network); 24 Nov 2011 20:01:54 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=btinternet.com; h=DKIM-Signature:X-Yahoo-Newman-Property:X-YMail-OSG:X-Yahoo-SMTP:Received:From:To:Subject:Date:Message-ID:References:In-Reply-To:X-Mailer:MIME-Version:Content-Type:Content-Transfer-Encoding; b=uvSY0PR0F0ifARh0Lcsp5mls+Ao4qleH6KlcRN8zL+OC1eAZu6o/enNIxPCjASpsRcCnD6BIJ+ayB+dGpKe/A0xjzEx3iB7mX0yG559aBzh8kQJBlFwq80lR5K63apuKathYzlRW0tRdrb5+gfMxpZXdWOe+9ptl5JNw0LNe2oQ= ; DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=btinternet.com; s=s1024; t=1322164914; bh=RiXR75Vmb9klhqw2sBC0Jmecyg43AiGM4Tn+EHEH/l4=; h=X-Yahoo-Newman-Property:X-YMail-OSG:X-Yahoo-SMTP:Received:From:To:Subject:Date:Message-ID:References:In-Reply-To:X-Mailer:MIME-Version:Content-Type:Content-Transfer-Encoding; b=WE2dd89TqlM3GHy4BFfcgY7DjXABSNCcnUhVxOoxRmY8+iPAt5rjtlnWq3aX37CaKL2x91FXSbwF8jGXDTp0MHAAEGiMUu7Iy1v3tushLeBeQtAMXs5AZeSBhH5RlROKWWV4zPgKcK9QFbSdaKURH7wCUcFYgYKaF9v9J8sVUk8= X-Yahoo-Newman-Property: ymail-3 X-YMail-OSG: mMfJZGwVM1m5RnrGn6A9DTHuzipXTfj5qY4spEj9AlH1qJ8 kZr4JU.Ij3wTzac3emvwouFDsr_dCjjLJ3RjHqGf3A7eVZiXj82oYUwpSnXS zbTz3n7q0AH4VPcB6YMkaWFomB2iFUxRRbT.FpttK4_1uva0q4g8pXYDYaHF mbnZC3O7xtirqLT9.Y0vxQ133a5KYHO_YCjzKzMdjpnrOT9bej32OiFVzh5q LxvOHeB1qUFgDBySXlwIAFcNk2TgVQcHRdpJ6bc5UPn5jjL3_vYjuHJYrXjh h2YcBbaZ_4GTyTZw5CKaqnFczV0JZe_SiaxHJDj_qhP5OQVc4ixnQXmbEPmi Q2lrm523PZEIZg5KkYddPTYMyAL6a0lg6Kwb2BgyMwJYC0hoiHg9wVXsEmY3 DmqU2.Z8h X-Yahoo-SMTP: c0ak_0qswBCr.Bn2iaJgfR.YmvD47..j8iN1St0lXTGPUQ-- Received: from Elena.home (afmcc@109.158.26.37 with login) by smtp827.mail.ird.yahoo.com with SMTP; 24 Nov 2011 12:01:54 -0800 PST From: TonyMc To: questions@freebsd.org Date: Thu, 24 Nov 2011 20:01:56 +0000 Message-ID: <9e8tc755mnb1ghmvp21musjr8imti4ottl@4ax.com> References: <20111124150901.GK87561@pcjas.obspm.fr> <20174.26176.829562.460613@jerusalem.litteratus.org> In-Reply-To: <20174.26176.829562.460613@jerusalem.litteratus.org> X-Mailer: Forte Agent 6.00/32.1186 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Cc: Subject: Re: 7.4 -> 8.2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 20:14:59 -0000 On Thu, 24 Nov 2011 10:44:00 -0500, Robert Huff wrote: > My gut reaction was "Are you familiar with the game of Russian >Roulette?". > > > Robert Huff > I have played a variant of this game using six cans of Guinness. Shake one can vigorously, then shuffle them around. Take it in turns to hold a can next to your head and pull the ring. Best played outdoors. Tony From owner-freebsd-questions@FreeBSD.ORG Thu Nov 24 20:45:47 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 66599106566B for ; Thu, 24 Nov 2011 20:45:47 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (wonkity.com [67.158.26.137]) by mx1.freebsd.org (Postfix) with ESMTP id 272848FC0A for ; Thu, 24 Nov 2011 20:45:46 +0000 (UTC) Received: from wonkity.com (localhost [127.0.0.1]) by wonkity.com (8.14.5/8.14.5) with ESMTP id pAOKjbvC070349; Thu, 24 Nov 2011 13:45:37 -0700 (MST) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.14.5/8.14.5/Submit) with ESMTP id pAOKjbX3070346; Thu, 24 Nov 2011 13:45:37 -0700 (MST) (envelope-from wblock@wonkity.com) Date: Thu, 24 Nov 2011 13:45:37 -0700 (MST) From: Warren Block To: Robert In-Reply-To: <20111124113938.2d99eec2@dell64> Message-ID: References: <201111241116.pAOBGH4i098240@fire.js.berklix.net> <20111124113938.2d99eec2@dell64> User-Agent: Alpine 2.00 (BSF 1167 2008-08-23) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.7 (wonkity.com [127.0.0.1]); Thu, 24 Nov 2011 13:45:37 -0700 (MST) Cc: "Julian H. Stacey" , questions@freebsd.org Subject: Re: Invalid fdisk partition table found (fwd) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Nov 2011 20:45:47 -0000 On Thu, 24 Nov 2011, Robert wrote: > [robert@dell64] ~> sudo gpart destroy -F da1 > da1 destroyed > > [robert@dell64] ~> fdisk /dev/da1 > ******* Working on device /dev/da1 ******* > parameters extracted from in-core disklabel are: > cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) > > parameters to be used for BIOS calculations are: > cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) > > fdisk: invalid fdisk partition table found The partition table was cleared. > Media sector size is 512 > Warning: BIOS sector numbering starts with sector 1 > Information from DOS bootblock is: > The data for partition 1 is: > sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > start 32, size 59360 (28 Meg), flag 80 (active) > beg: cyl 0/ head 1/ sector 1; > end: cyl 28/ head 63/ sector 32 And it starts with a default table equal to the size of the drive. > I see the flashing lights like it is writing to the CF card but nothing > changes. > > More suggestions welcome. These are quite expensive CF cards. The dd/fdisk and gpart results show the same problem, so it likely isn't in the partitioning. Do both cards report the same size? I found recently that there is some oddness with certain Sandisk flash memory that made it non-responsive to anything. FreeBSD couldn't do a thing with it. Before throwing it away, I tried it on a Windows Vista system... which recognized and formatted it without a complaint. Now it works on everything. Special vendor-specific code in Windows? Another option would be to attempt formatting the cards with a camera. From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 04:47:06 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AD238106566B for ; Fri, 25 Nov 2011 04:47:06 +0000 (UTC) (envelope-from mueller6727@bellsouth.net) Received: from fmailhost05.isp.att.net (fmailhost05.isp.att.net [207.115.11.55]) by mx1.freebsd.org (Postfix) with ESMTP id 9BFB38FC12 for ; Fri, 25 Nov 2011 04:47:06 +0000 (UTC) Date: Fri, 25 Nov 2011 04:47:06 +0000 (GMT) X-Comment: Sending client does not conform to RFC822 minimum requirements X-Comment: Date has been added by Maillennium Received: from localhost (adsl-68-210-130-165.sdf.bellsouth.net[68.210.130.165]) by isp.att.net (frfwmhc05) with SMTP id <20111125044705H0500dukdhe>; Fri, 25 Nov 2011 04:47:05 +0000 X-Originating-IP: [68.210.130.165] From: "Thomas Mueller" To: freebsd-questions@FreeBSD.org References: Message-Id: <20111125044706.AD238106566B@hub.freebsd.org> Cc: "b. f." Subject: Re: Quick build of stripped-down kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 04:47:06 -0000 from "b. f." : > If you are going to build most of the modules, but only want to > exclude a few, then add the directories of the modules to be excluded > (relative to /usr/src/sys/modules) to WITHOUT_MODULES, for example in > /etc/make.conf. If you are only going to build a few modules, and want > to exclude the majority of the modules, then add the directories of > the modules that are to be built to MODULES_OVERRIDE. For no modules > at all, set NO_MODULES. See /usr/src/sys/modules/Makefile and > /usr/src/sys/conf/kern.post.mk for details. You may also save some > time by using one of your faster machines to build the OS for the > slower machines. Suppose you want to build more than one kernel so as to be able to choose at boot time. Then you might not want to build modules redundantly. So how would you make the modules from /boot/kernel accessible when booting /boot/kernel2? Tom From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 10:59:12 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 785D91065670 for ; Fri, 25 Nov 2011 10:59:12 +0000 (UTC) (envelope-from moritz@wzff.de) Received: from barfooze.de (unknown [IPv6:2a01:4f8:7d:200:0:4e2e:75d4:1]) by mx1.freebsd.org (Postfix) with ESMTP id 4472D8FC17 for ; Fri, 25 Nov 2011 10:59:12 +0000 (UTC) Received: from localhost.localdomain ([127.0.0.1] helo=barfooze.de) by barfooze.de with smtp (Exim 4.76) (envelope-from ) id 1RTtUj-0005aW-Fc for freebsd-questions@freebsd.org; Fri, 25 Nov 2011 11:59:10 +0100 Date: Fri, 25 Nov 2011 11:59:01 +0100 From: Moritz Wilhelmy To: freebsd-questions@freebsd.org Message-ID: <20111125105901.GK16096@barfooze.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.21 (2010-09-15) Subject: No colours at all with ncurses and urxvt on FreeBSD 9.0-RC2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 10:59:12 -0000 Hello, I can't get colours to work with urxvt (the "normal" urxvt, that is, not the 256-color one) over ssh. Google doesn't come up with any usable results for this particular case.. What bothers me is that a termcap entry for "rxvt-unicode" is present on the termcap file FreeBSD came with. I'm really clueless here, can someone give me a hint? Best, Moritz From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 11:43:26 2011 Return-Path: Delivered-To: freebsd-questions@FreeBSD.org Received: by hub.freebsd.org (Postfix, from userid 1233) id 92AD31065670; Fri, 25 Nov 2011 11:43:26 +0000 (UTC) Date: Fri, 25 Nov 2011 11:43:26 +0000 From: Alexander Best To: Thomas Mueller Message-ID: <20111125114326.GA38085@freebsd.org> References: <20111125044706.AD238106566B@hub.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20111125044706.AD238106566B@hub.freebsd.org> Cc: freebsd-questions@FreeBSD.org, "b. f." Subject: Re: Quick build of stripped-down kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 11:43:26 -0000 On Fri Nov 25 11, Thomas Mueller wrote: > from "b. f." : > > > If you are going to build most of the modules, but only want to > > exclude a few, then add the directories of the modules to be excluded > > (relative to /usr/src/sys/modules) to WITHOUT_MODULES, for example in > > /etc/make.conf. If you are only going to build a few modules, and want > > to exclude the majority of the modules, then add the directories of > > the modules that are to be built to MODULES_OVERRIDE. For no modules > > at all, set NO_MODULES. See /usr/src/sys/modules/Makefile and > > /usr/src/sys/conf/kern.post.mk for details. You may also save some > > time by using one of your faster machines to build the OS for the > > slower machines. > > Suppose you want to build more than one kernel so as to be able to choose at boot time. > > Then you might not want to build modules redundantly. So how would you make the modules from /boot/kernel accessible when booting /boot/kernel2? irrc there was a patch posted on some of the mailinglists not a long time ago, which added support for building only those modules, which aren't part of the kernel. this might be a good alternative, if you want a small footprint, but want to take advantage of all the freebsd kernel drivers/etc. cheers. alex > > Tom > From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 12:02:16 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EBF4810656A3 for ; Fri, 25 Nov 2011 12:02:16 +0000 (UTC) (envelope-from moritz@wzff.de) Received: from barfooze.de (unknown [IPv6:2a01:4f8:7d:200:0:4e2e:75d4:1]) by mx1.freebsd.org (Postfix) with ESMTP id 8E4C58FC25 for ; Fri, 25 Nov 2011 12:02:16 +0000 (UTC) Received: from localhost.localdomain ([127.0.0.1] helo=barfooze.de) by barfooze.de with smtp (Exim 4.76) (envelope-from ) id 1RTuTv-0004UK-2A for freebsd-questions@freebsd.org; Fri, 25 Nov 2011 13:02:15 +0100 Date: Fri, 25 Nov 2011 13:02:15 +0100 From: Moritz Wilhelmy To: freebsd-questions@freebsd.org Message-ID: <20111125120215.GL16096@barfooze.de> References: <20111125105901.GK16096@barfooze.de> <20111125113718.GA4064@debian50-32.invisible-island.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20111125113718.GA4064@debian50-32.invisible-island.net> User-Agent: Mutt/1.5.21 (2010-09-15) Subject: Re: No colours at all with ncurses and urxvt on FreeBSD 9.0-RC2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 12:02:17 -0000 On Fri, Nov 25, 2011 at 06:37:18 -0500, Thomas Dickey wrote: > On Fri, Nov 25, 2011 at 11:59:01AM +0100, Moritz Wilhelmy wrote: > > I can't get colours to work with urxvt (the "normal" urxvt, that is, not > > the 256-color one) over ssh. Google doesn't come up with any usable > > results for this particular case.. What bothers me is that a termcap > > entry for "rxvt-unicode" is present on the termcap file FreeBSD came > > with. I'm really clueless here, can someone give me a hint? > > setting TERM to rxvt-256color looks like the way to fix that issue. Indeed, setting TERM to either "rxvt-256color" or "rxvt" gives me colours. The remaining question is, why doesn't it work with "rxvt-unicode", which is also in the termcap file? I'd prefer not working around the issue anymore by conditionally setting TERM on all my FreeBSD boxes, but fixing it once and for all... Nevertheless, thanks for your quick reply. Your help is appreciated :-) Best regards, Moritz From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 12:37:38 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EB530106566C for ; Fri, 25 Nov 2011 12:37:38 +0000 (UTC) (envelope-from tom@invisible-island.net) Received: from vms173011pub.verizon.net (vms173011pub.verizon.net [206.46.173.11]) by mx1.freebsd.org (Postfix) with ESMTP id C0EF28FC0C for ; Fri, 25 Nov 2011 12:37:38 +0000 (UTC) Received: from par-debian50-32.invisible-island.net ([unknown] [96.241.212.238]) by vms173011.mailsrvcs.net (Sun Java(tm) System Messaging Server 7u2-7.02 32bit (built Apr 16 2009)) with ESMTPA id <0LV700F6DSA7GWA5@vms173011.mailsrvcs.net> for freebsd-questions@freebsd.org; Fri, 25 Nov 2011 05:37:23 -0600 (CST) Received: from par-debian50-32.invisible-island.net (localhost [127.0.0.1]) by par-debian50-32.invisible-island.net (8.14.3/8.14.3/Debian-5+lenny1) with ESMTP id pAPBbII1004173 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Fri, 25 Nov 2011 06:37:18 -0500 Received: (from tom@localhost) by par-debian50-32.invisible-island.net (8.14.3/8.14.3/Submit) id pAPBbIsD004171; Fri, 25 Nov 2011 06:37:18 -0500 Date: Fri, 25 Nov 2011 06:37:18 -0500 From: Thomas Dickey To: Moritz Wilhelmy Message-id: <20111125113718.GA4064@debian50-32.invisible-island.net> References: <20111125105901.GK16096@barfooze.de> MIME-version: 1.0 Content-type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="k1lZvvs/B4yU6o8G" Content-disposition: inline In-reply-to: <20111125105901.GK16096@barfooze.de> User-Agent: Mutt/1.5.18 (2008-05-17) Cc: freebsd-questions@freebsd.org Subject: Re: No colours at all with ncurses and urxvt on FreeBSD 9.0-RC2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: dickey@his.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 12:37:39 -0000 --k1lZvvs/B4yU6o8G Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Nov 25, 2011 at 11:59:01AM +0100, Moritz Wilhelmy wrote: > Hello, >=20 > I can't get colours to work with urxvt (the "normal" urxvt, that is, not > the 256-color one) over ssh. Google doesn't come up with any usable > results for this particular case.. What bothers me is that a termcap > entry for "rxvt-unicode" is present on the termcap file FreeBSD came > with. I'm really clueless here, can someone give me a hint? setting TERM to rxvt-256color looks like the way to fix that issue. --=20 Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net --k1lZvvs/B4yU6o8G Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAk7Pfe4ACgkQcCNT4PfkjtskzwCgsN1wU7uWSV/4/hPZxwYOBm/U oSMAnAtLaWKAIq+F1iXuMQ0P2lZbK9L6 =04/Q -----END PGP SIGNATURE----- --k1lZvvs/B4yU6o8G-- From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 13:19:32 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E9B22106566B for ; Fri, 25 Nov 2011 13:19:31 +0000 (UTC) (envelope-from tom@invisible-island.net) Received: from vms173007pub.verizon.net (vms173007pub.verizon.net [206.46.173.7]) by mx1.freebsd.org (Postfix) with ESMTP id BCCAD8FC16 for ; Fri, 25 Nov 2011 13:19:31 +0000 (UTC) Received: from par-debian50-32.invisible-island.net ([unknown] [96.241.212.238]) by vms173007.mailsrvcs.net (Sun Java(tm) System Messaging Server 7u2-7.02 32bit (built Apr 16 2009)) with ESMTPA id <0LV700L6ZX04COY2@vms173007.mailsrvcs.net> for freebsd-questions@freebsd.org; Fri, 25 Nov 2011 07:19:20 -0600 (CST) Received: from par-debian50-32.invisible-island.net (localhost [127.0.0.1]) by par-debian50-32.invisible-island.net (8.14.3/8.14.3/Debian-5+lenny1) with ESMTP id pAPDJFM6007277 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT) for ; Fri, 25 Nov 2011 08:19:15 -0500 Received: (from tom@localhost) by par-debian50-32.invisible-island.net (8.14.3/8.14.3/Submit) id pAPDJFOZ007275 for freebsd-questions@freebsd.org; Fri, 25 Nov 2011 08:19:15 -0500 Date: Fri, 25 Nov 2011 08:19:15 -0500 From: Thomas Dickey To: freebsd-questions@freebsd.org Message-id: <20111125131915.GA5966@debian50-32.invisible-island.net> References: <20111125105901.GK16096@barfooze.de> <20111125113718.GA4064@debian50-32.invisible-island.net> <20111125120215.GL16096@barfooze.de> MIME-version: 1.0 Content-type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary=KsGdsel6WgEHnImy Content-disposition: inline In-reply-to: <20111125120215.GL16096@barfooze.de> User-Agent: Mutt/1.5.18 (2008-05-17) Subject: Re: No colours at all with ncurses and urxvt on FreeBSD 9.0-RC2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: dickey@his.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 13:19:32 -0000 --KsGdsel6WgEHnImy Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Nov 25, 2011 at 01:02:15PM +0100, Moritz Wilhelmy wrote: > On Fri, Nov 25, 2011 at 06:37:18 -0500, Thomas Dickey wrote: > > On Fri, Nov 25, 2011 at 11:59:01AM +0100, Moritz Wilhelmy wrote: > > > I can't get colours to work with urxvt (the "normal" urxvt, that is, = not > > > the 256-color one) over ssh. Google doesn't come up with any usable > > > results for this particular case.. What bothers me is that a termcap > > > entry for "rxvt-unicode" is present on the termcap file FreeBSD came > > > with. I'm really clueless here, can someone give me a hint? > >=20 > > setting TERM to rxvt-256color looks like the way to fix that issue. >=20 > Indeed, setting TERM to either "rxvt-256color" or "rxvt" gives me > colours. The remaining question is, why doesn't it work with > "rxvt-unicode", which is also in the termcap file? well... rxvt-unicode-256color was the effect of the checkins for termcap.src for conf/152713 and conf/153164 The earlier one suggests that the naming came from rxvt-unicode's sources. Checking that, it seems that the rxvt-unicode entry specifies 88 colors, while the rxvt-unicode-256color entry (close to rxvt-256color) does 256. However, the rxvt-unicode entry in FreeBSD was added for conf/117323, which equated it to rxvt-mono (no color), with some changes for function-ke= ys. On the other hand, the rxvt entry uses color, which was overlooked in conf/117323: # Termcap entry for rxvt-unicode, taken from http://cvs.schmorp.de/rxvt-uni= code/doc/rxvt.7.html#I_need_a_termcap_file_entry rxvt-unicode|rxvt-unicode terminal (X Window System):\ :SF=3D\E[%dS:SR=3D\E[%dT:bw:ec=3D\E[%dX:kb=3D\177:kd=3D\EOB:ke=3D\E[?1l\E>= :\ :kl=3D\EOD:kr=3D\EOC:ks=3D\E[?1h\E=3D:ku=3D\EOA:lm#0:te=3D\E[r\E[?1049l:\ :ti=3D\E[?1049h:tc=3Drxvt-mono: rxvt|rxvt terminal emulator (X Window System):\ :pa#64:Co#8:AF=3D\E[3%dm:AB=3D\E[4%dm:op=3D\E[39;49m:tc=3Drxvt-mono: Following the clue from the comment, the example using no color was present in rxvt.7 until it was removed in version 9.05 of rxvt-unicode. The current documentation contains no examples (the termcap/terminfo are only separate files). --=20 Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net --KsGdsel6WgEHnImy Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAk7PldMACgkQcCNT4PfkjtvPygCgqQu5IDLb78qM7Mau/w9Xu1h6 arwAoJWcpGfUcFiSLfI0heMHozjbMCHv =uL+Q -----END PGP SIGNATURE----- --KsGdsel6WgEHnImy-- From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 16:31:38 2011 Return-Path: Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6D4B11065674 for ; Fri, 25 Nov 2011 16:31:38 +0000 (UTC) (envelope-from brett@lariat.net) Received: from lariat.net (lariat.net [66.62.230.51]) by mx1.freebsd.org (Postfix) with ESMTP id 0C0718FC16 for ; Fri, 25 Nov 2011 16:31:37 +0000 (UTC) Received: from WildRover.lariat.net (IDENT:ppp1000.lariat.net@lariat.net [66.119.58.2] (may be forged)) by lariat.net (8.9.3/8.9.3) with ESMTP id JAA18736; Fri, 25 Nov 2011 09:19:12 -0700 (MST) Message-Id: <201111251619.JAA18736@lariat.net> X-Mailer: QUALCOMM Windows Eudora Version 7.1.0.9 Date: Fri, 25 Nov 2011 01:10:38 -0700 To: "Terrence Koeman" , "freebsd-questions@FreeBSD.org" From: Brett Glass In-Reply-To: <2a449d3a0a37ab479c97962b436bb95c@mediamonks.net> References: <201111241439.HAA07258@lariat.net> <2a449d3a0a37ab479c97962b436bb95c@mediamonks.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Cc: Subject: RE: Quick build of stripped-down kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 16:31:38 -0000 At 10:39 AM 11/24/2011, Terrence Koeman wrote: >Add > >makeoptions NO_MODULES=yes > >to your KERNCONF. Thank you (and thanks also to the other folks who responded in private e-mail). It also has a second advantage: besides disabling generation of the .ko files, it also suppresses compilation of drivers that are not going to be linked statically into the kernel. Build on an older Pentium II server took about 10-12% of the time! Worth knowing about. --Brett Glass From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 17:13:14 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9005A106566B for ; Fri, 25 Nov 2011 17:13:14 +0000 (UTC) (envelope-from bf1783@googlemail.com) Received: from mail-ww0-f50.google.com (mail-ww0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id 2626E8FC13 for ; Fri, 25 Nov 2011 17:13:13 +0000 (UTC) Received: by wwe5 with SMTP id 5so2340860wwe.31 for ; Fri, 25 Nov 2011 09:13:13 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=gamma; h=mime-version:reply-to:in-reply-to:references:date:message-id :subject:from:to:cc:content-type; bh=QCNF0E9ryHu9IF8rHWgjVdmtO8ao+kqBjXxwvWfqNCA=; b=rzNQwQoEj7BiREcYUgbaM3xiouFhVC64/W1EZW/dlt2oGkkEtBzvUHJlVtSZf2bivj RVPagsvu94GTNCpxH9nObeOdKZ/Ht64CTZefR+zSnEDIjvRX3ZlCf5N0LEthIpMcyBw7 ZLpPcAILkdrKYfb75pzHwV1wbyeiv78ytNA7s= MIME-Version: 1.0 Received: by 10.216.229.13 with SMTP id g13mr46985weq.52.1322241192317; Fri, 25 Nov 2011 09:13:12 -0800 (PST) Received: by 10.180.94.131 with HTTP; Fri, 25 Nov 2011 09:13:12 -0800 (PST) In-Reply-To: <4ecf1dca.22d1440a.2dd2.3464SMTPIN_ADDED@mx.google.com> References: <4ecf1dca.22d1440a.2dd2.3464SMTPIN_ADDED@mx.google.com> Date: Fri, 25 Nov 2011 17:13:12 +0000 Message-ID: From: "b. f." To: Thomas Mueller Content-Type: text/plain; charset=ISO-8859-1 Cc: freebsd-questions@freebsd.org Subject: Re: Quick build of stripped-down kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: bf1783@gmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 17:13:14 -0000 On 11/25/11, Thomas Mueller wrote: > from "b. f." : > >> If you are going to build most of the modules, but only want to >> exclude a few, then add the directories of the modules to be excluded >> (relative to /usr/src/sys/modules) to WITHOUT_MODULES, for example in >> /etc/make.conf. If you are only going to build a few modules, and want >> to exclude the majority of the modules, then add the directories of >> the modules that are to be built to MODULES_OVERRIDE. For no modules >> at all, set NO_MODULES. See /usr/src/sys/modules/Makefile and >> /usr/src/sys/conf/kern.post.mk for details. You may also save some >> time by using one of your faster machines to build the OS for the >> slower machines. > > Suppose you want to build more than one kernel so as to be able to choose at > boot time. > > Then you might not want to build modules redundantly. So how would you make > the modules from /boot/kernel accessible when booting /boot/kernel2? > If the kernel versions were compatible, and the set of modules were the same, I suppose you could set MODULES_WITH_WORLD and KODIR=/boot/modules during buildworld and installworld, to build the modules as part of buildworld and install them in /boot/modules during installworld, rather than in /boot/kernel or /boot/kernel2. Then you could build and install both of your kernels with NO_MODULES, as previously discussed, and with your different choices of KODIR for each kernel. Because /boot/modules is part of the default module_path defined in /boot/defaults/loader.conf, the modules ought to load as usual for either kernel. If you wanted to place them in a different directory, you could alter KODIR during buildworld and installworld, and add the directory to module_path in /boot/loader.conf. I haven't tested this, but I think that it will work, and I'd be interested to hear whether it does. There are of course alternative methods. b. From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 17:41:44 2011 Return-Path: Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CCA871065672 for ; Fri, 25 Nov 2011 17:41:44 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from asbnvacz-mailrelay01.megapath.net (asbnvacz-mailrelay01.megapath.net [207.145.128.243]) by mx1.freebsd.org (Postfix) with ESMTP id 854E78FC17 for ; Fri, 25 Nov 2011 17:41:44 +0000 (UTC) Received: from mail8.sea5.speakeasy.net (mail8.sea5.speakeasy.net [69.17.117.53]) by asbnvacz-mailrelay01.megapath.net (Postfix) with ESMTP id AA371A70AD1 for ; Fri, 25 Nov 2011 12:41:43 -0500 (EST) Received: (qmail 1188 invoked from network); 25 Nov 2011 17:41:42 -0000 Received: by simscan 1.4.0 ppid: 3547, pid: 29550, t: 0.1730s scanners: clamav: 0.88.2/m:52/d:13495 Received: from unknown (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail8.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 25 Nov 2011 17:41:42 -0000 Received: from lowell-desk.lan (lowell-desk.lan [172.30.250.8]) by be-well.ilk.org (Postfix) with ESMTP id D45E55645E; Fri, 25 Nov 2011 12:41:36 -0500 (EST) Received: by lowell-desk.lan (Postfix, from userid 1147) id 1156F39841; Fri, 25 Nov 2011 12:41:34 -0500 (EST) From: Lowell Gilbert To: "Thomas Mueller" References: <20111123114340.04290106566C@hub.freebsd.org> Date: Fri, 25 Nov 2011 12:41:34 -0500 In-Reply-To: <20111123114340.04290106566C@hub.freebsd.org> (Thomas Mueller's message of "Wed, 23 Nov 2011 11:39:13 +0000 (GMT)") Message-ID: <44fwhc6qwh.fsf@lowell-desk.lan> User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/23.3 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@FreeBSD.org Subject: Re: "options atapicam" and/or "device ATA_CAM" in kernel config? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@FreeBSD.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 17:41:44 -0000 "Thomas Mueller" writes: > What is the role of "options atapicam" and "device ATA_CAM" in kernel config file? > > Are they redundant? Kernel will build with both these options, but will it make things go awry? Is ATA_CAM deprecated? As far as I can see, ATA_CAM isn't currently documented. Just ignore it. > I am trying to burn a CD (or DVD) on a SATA DVD-RW drive, but cdrtools don't work. > > Also, how do I build and install a kernel to some name other than /boot/kernel, and not build all modules in duplicate? > > I might want to try kernels with some differences in options, but with the same modules. > > NetBSD and Linux make it easy to choose a non-default name for the kernel, so I can have multiple kernels and choose one at boot. The usual way is to have a separate config file for each, although you can come up with other ways if you feel like being clever. The config files support an include functionality, so working through the files is pretty easy. As for leaving out modules, there are a number of options documented for make.conf(5) and src.conf(5) that give you various kinds of control. > In Linux, beginning with kernels 2.6.*, cdrtools work without the ATA-SCSI dance. You don't say what version of FreeBSD you're on. I'm still using RELENG_8, so I may be missing some choices for later versions, where I understand that the CAM code has been significantly reworked. From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 17:51:06 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 29AC51065670 for ; Fri, 25 Nov 2011 17:51:06 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from asbnvacz-mailrelay01.megapath.net (asbnvacz-mailrelay01.megapath.net [207.145.128.243]) by mx1.freebsd.org (Postfix) with ESMTP id D6DA18FC0C for ; Fri, 25 Nov 2011 17:51:05 +0000 (UTC) Received: from mail7.sea5.speakeasy.net (mail7.sea5.speakeasy.net [69.17.117.52]) by asbnvacz-mailrelay01.megapath.net (Postfix) with ESMTP id 22B35A70AD1 for ; Fri, 25 Nov 2011 12:51:05 -0500 (EST) Received: (qmail 25073 invoked from network); 25 Nov 2011 17:51:04 -0000 Received: by simscan 1.4.0 ppid: 28029, pid: 32511, t: 0.1810s scanners: clamav: 0.88.2/m:52/d:13513 Received: from unknown (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail7.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 25 Nov 2011 17:51:04 -0000 Received: from lowell-desk.lan (lowell-desk.lan [172.30.250.8]) by be-well.ilk.org (Postfix) with ESMTP id 7F83B5645E; Fri, 25 Nov 2011 12:50:58 -0500 (EST) Received: by lowell-desk.lan (Postfix, from userid 1147) id 70CA339841; Fri, 25 Nov 2011 12:50:57 -0500 (EST) From: Lowell Gilbert To: Robert References: <20111123123347.4f439c9c@dell64> Date: Fri, 25 Nov 2011 12:50:57 -0500 In-Reply-To: <20111123123347.4f439c9c@dell64> (Robert's message of "Wed, 23 Nov 2011 12:33:47 -0800") Message-ID: <44bos06qgu.fsf@lowell-desk.lan> User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/23.3 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: Invalid fdisk partition table found X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 17:51:06 -0000 Robert writes: > Greetings > > [robert@dell64] ~> uname -a > FreeBSD dell64.shasta204.local 8.2-STABLE FreeBSD 8.2-STABLE #34: Fri > Nov 18 06:43:01 PST 2011 > root@dell64.shasta204.local:/usr/obj/usr/src/sys/GENERIC amd64 > > I have two Lexar Professional 600X 16GB compact flash cards that are > unusable. fdisk shows: > > [robert@dell64] ~> fdisk /dev/da1 > ******* Working on device /dev/da1 ******* > parameters extracted from in-core disklabel are: > cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) > > parameters to be used for BIOS calculations are: > cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) > > fdisk: invalid fdisk partition table found > Media sector size is 512 > Warning: BIOS sector numbering starts with sector 1 > Information from DOS bootblock is: > The data for partition 1 is: > sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > start 32, size 59360 (28 Meg), flag 80 (active) > beg: cyl 0/ head 1/ sector 1; > end: cyl 28/ head 63/ sector 32 > The data for partition 2 is: > > The data for partition 3 is: > > The data for partition 4 is: > > > It shows only 28 MB instead of 16GB. I have tried to change the type > from 165 (FreeBSD) to msdosfs types 6 11 or 12 using fdisk -u and fdisk > -i and also "sade". I do not get an error but when finished it still > shows the same data. > > I have tried to zero it out using " dd if=/dev/zero of=/dev/da1 bs=1m > and nothing changes. I have tried different block sizes and counts to > no avail. If you zero it out and fdisk still sees a partition table, the write probably didn't really happen. [Modulo some possible issues with the kernel caching the disk parameters.] fdisk is sometimes a bit quiet about its errors, but dd isn't... From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 17:55:13 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B4ECD106566C for ; Fri, 25 Nov 2011 17:55:13 +0000 (UTC) (envelope-from traveling08@cox.net) Received: from fed1rmfepo101.cox.net (fed1rmfepo101.cox.net [68.230.241.143]) by mx1.freebsd.org (Postfix) with ESMTP id 883F48FC08 for ; Fri, 25 Nov 2011 17:55:13 +0000 (UTC) Received: from fed1rmimpo306.cox.net ([68.230.241.174]) by fed1rmfepo101.cox.net (InterMail vM.8.01.04.00 201-2260-137-20101110) with ESMTP id <20111125175502.HRGH3806.fed1rmfepo101.cox.net@fed1rmimpo306.cox.net>; Fri, 25 Nov 2011 12:55:02 -0500 Received: from dell64 ([72.220.91.219]) by fed1rmimpo306.cox.net with bizsmtp id 1Vu91i00H4jy6EY03Vu9J2; Fri, 25 Nov 2011 12:54:09 -0500 X-CT-Class: Clean X-CT-Score: 0.00 X-CT-RefID: str=0001.0A020204.4ECFD676.00BE,ss=1,re=0.000,fgs=0 X-CT-Spam: 0 X-Authority-Analysis: v=1.1 cv=dLinpSRpD/siYDweLtUcKy2MkOOT9IlUWnc+SxVPJKw= c=1 sm=1 a=d5xdBJzwzI4A:10 a=G8Uczd0VNMoA:10 a=kj9zAlcOel0A:10 a=olICo1sKaMXbpqbYUd6B5g==:17 a=s1O25tkdAAAA:8 a=jpBtCq5R6TThOshGzLYA:9 a=AOcAIfw-IZ6hwW_8kYcA:7 a=CjuIK1q_8ugA:10 a=OyOq_G8mXAEA:10 a=olICo1sKaMXbpqbYUd6B5g==:117 X-CM-Score: 0.00 Authentication-Results: cox.net; none Date: Fri, 25 Nov 2011 09:54:57 -0800 From: Robert To: Warren Block Message-ID: <20111125095457.477e9501@dell64> In-Reply-To: References: <201111241116.pAOBGH4i098240@fire.js.berklix.net> <20111124113938.2d99eec2@dell64> X-Mailer: Claws Mail 3.7.10 (GTK+ 2.24.6; amd64-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: "Julian H. Stacey" , questions@freebsd.org Subject: Re: Invalid fdisk partition table found (fwd) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 17:55:13 -0000 On Thu, 24 Nov 2011 13:45:37 -0700 (MST) Warren Block wrote: > On Thu, 24 Nov 2011, Robert wrote: > > > [robert@dell64] ~> sudo gpart destroy -F da1 > > da1 destroyed > > > > [robert@dell64] ~> fdisk /dev/da1 > > ******* Working on device /dev/da1 ******* > > parameters extracted from in-core disklabel are: > > cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) > > > > parameters to be used for BIOS calculations are: > > cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) > > > > fdisk: invalid fdisk partition table found > > The partition table was cleared. > > > Media sector size is 512 > > Warning: BIOS sector numbering starts with sector 1 > > Information from DOS bootblock is: > > The data for partition 1 is: > > sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > > start 32, size 59360 (28 Meg), flag 80 (active) > > beg: cyl 0/ head 1/ sector 1; > > end: cyl 28/ head 63/ sector 32 > > And it starts with a default table equal to the size of the drive. Is it supposed to still show sysid 165 ? I was under the impression that dd if=/dev/zero would clean out everything including sector 1. > > > I see the flashing lights like it is writing to the CF card but > > nothing changes. > > > > More suggestions welcome. These are quite expensive CF cards. > > The dd/fdisk and gpart results show the same problem, so it likely > isn't in the partitioning. > > Do both cards report the same size? Yes..sort of 28, 29 MB > > I found recently that there is some oddness with certain Sandisk > flash memory that made it non-responsive to anything. FreeBSD > couldn't do a thing with it. Before throwing it away, I tried it on > a Windows Vista system... which recognized and formatted it without a > complaint. Now it works on everything. Special vendor-specific code > in Windows? XP Pro shows and error that the disk cannot be formatted. I tried it in the wifes Windows 7 and it shows no drive attached. > > Another option would be to attempt formatting the cards with a camera. I'll have to ask the camera owner if she tried that. OT. The last 2 times that I have sent replies to two list regarding this question, I have not seen it come through to me. Julian's relies as well as yours come through. Robert From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 17:58:23 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7A970106566C for ; Fri, 25 Nov 2011 17:58:23 +0000 (UTC) (envelope-from moritz@wzff.de) Received: from barfooze.de (unknown [IPv6:2a01:4f8:7d:200:0:4e2e:75d4:1]) by mx1.freebsd.org (Postfix) with ESMTP id 1C5678FC0A for ; Fri, 25 Nov 2011 17:58:23 +0000 (UTC) Received: from localhost.localdomain ([127.0.0.1] helo=barfooze.de) by barfooze.de with smtp (Exim 4.76) (envelope-from ) id 1RU02X-0003Oy-Df for freebsd-questions@freebsd.org; Fri, 25 Nov 2011 18:58:21 +0100 Date: Fri, 25 Nov 2011 18:58:21 +0100 From: Moritz Wilhelmy To: freebsd-questions@freebsd.org Message-ID: <20111125175821.GN16096@barfooze.de> References: <20111125105901.GK16096@barfooze.de> <20111125113718.GA4064@debian50-32.invisible-island.net> <20111125120215.GL16096@barfooze.de> <20111125131915.GA5966@debian50-32.invisible-island.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20111125131915.GA5966@debian50-32.invisible-island.net> User-Agent: Mutt/1.5.21 (2010-09-15) Subject: Re: No colours at all with ncurses and urxvt on FreeBSD 9.0-RC2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 17:58:23 -0000 On Fri, Nov 25, 2011 at 08:19:15 -0500, Thomas Dickey wrote: > well... rxvt-unicode-256color was the effect of the checkins for termcap.src > for conf/152713 and conf/153164 > > The earlier one suggests that the naming came from rxvt-unicode's sources. > Checking that, it seems that the rxvt-unicode entry specifies 88 colors, > while the rxvt-unicode-256color entry (close to rxvt-256color) does 256. > > However, the rxvt-unicode entry in FreeBSD was added for conf/117323, > which equated it to rxvt-mono (no color), with some changes for function-keys. > > On the other hand, the rxvt entry uses color, which was overlooked in > conf/117323: > > # Termcap entry for rxvt-unicode, taken from http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.html#I_need_a_termcap_file_entry > rxvt-unicode|rxvt-unicode terminal (X Window System):\ > :SF=\E[%dS:SR=\E[%dT:bw:ec=\E[%dX:kb=\177:kd=\EOB:ke=\E[?1l\E>:\ > :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:lm#0:te=\E[r\E[?1049l:\ > :ti=\E[?1049h:tc=rxvt-mono: And I already wondered why it was so short.. > rxvt|rxvt terminal emulator (X Window System):\ > :pa#64:Co#8:AF=\E[3%dm:AB=\E[4%dm:op=\E[39;49m:tc=rxvt-mono: > > Following the clue from the comment, the example using no color was present > in rxvt.7 until it was removed in version 9.05 of rxvt-unicode. The current > documentation contains no examples (the termcap/terminfo are only separate > files). This sounds like a bug in FreeBSD's default termcap. Should I file a PR? Moritz From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 18:27:57 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 71B53106564A for ; Fri, 25 Nov 2011 18:27:57 +0000 (UTC) (envelope-from ml@my.gd) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 04F988FC08 for ; Fri, 25 Nov 2011 18:27:56 +0000 (UTC) Received: by faap15 with SMTP id p15so5257433faa.13 for ; Fri, 25 Nov 2011 10:27:56 -0800 (PST) Received: by 10.152.102.138 with SMTP id fo10mr21465893lab.44.1322245675839; Fri, 25 Nov 2011 10:27:55 -0800 (PST) Received: from dfleuriot-at-hi-media.com ([83.167.62.196]) by mx.google.com with ESMTPS id ne3sm23598474lab.7.2011.11.25.10.27.54 (version=SSLv3 cipher=OTHER); Fri, 25 Nov 2011 10:27:55 -0800 (PST) Message-ID: <4ECFDE2A.4090609@my.gd> Date: Fri, 25 Nov 2011 19:27:54 +0100 From: Damien Fleuriot User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: buildkernel not honoring WITH_MODULES from make.conf ? (was: Re: Quick build of stripped-down kernel) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 18:27:57 -0000 On 11/24/11 4:17 PM, b. f. wrote: > > If you are going to build most of the modules, but only want to > exclude a few, then add the directories of the modules to be excluded > (relative to /usr/src/sys/modules) to WITHOUT_MODULES, for example in > /etc/make.conf. If you are only going to build a few modules, and want > to exclude the majority of the modules, then add the directories of > the modules that are to be built to MODULES_OVERRIDE. For no modules > at all, set NO_MODULES. See /usr/src/sys/modules/Makefile and > /usr/src/sys/conf/kern.post.mk for details. You may also save some > time by using one of your faster machines to build the OS for the > slower machines. > > b. Hijacking this thread to report what might or might not be a problem on my part. On a 8.2-RELEASE box, I have set the following in /etc/make.conf: KERNCONF=MULTI WITH_MODULES=geom_label if_lagg linprocfs linsysfs linux mfi_linux I have then run, from /usr/src : make buildkernel make installkernel I notice, at the end of installkernel: [snip] ===> xl (install) install -o root -g wheel -m 555 if_xl.ko /boot/kernel install -o root -g wheel -m 555 if_xl.ko.symbols /boot/kernel ===> zfs (install) install -o root -g wheel -m 555 zfs.ko /boot/kernel install -o root -g wheel -m 555 zfs.ko.symbols /boot/kernel Why does it build and install these modules (and a whole lot of other ones) although they're not part of my WITH_MODULES list ? kldstat reports: Id Refs Address Size Name 1 21 0xffffffff80100000 999620 kernel 2 1 0xffffffff80a9a000 bc10 geom_label.ko 3 1 0xffffffff80aa6000 1358 mfi_linux.ko 4 4 0xffffffff80aa8000 42558 linux.ko 5 1 0xffffffff80c22000 3ee0 linprocfs.ko 6 1 0xffffffff80c26000 a11 linsysfs.ko 7 1 0xffffffff80c27000 4f2c if_lagg.ko My issue here is that I totally don't need if_xl for example and would really love for it to be neither built nor installed. Have I misunderstood WITH_MODULES' use ? From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 18:31:15 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B4A7F1065675 for ; Fri, 25 Nov 2011 18:31:15 +0000 (UTC) (envelope-from tom@invisible-island.net) Received: from vms173001pub.verizon.net (vms173001pub.verizon.net [206.46.173.1]) by mx1.freebsd.org (Postfix) with ESMTP id 865AD8FC13 for ; Fri, 25 Nov 2011 18:31:15 +0000 (UTC) Received: from par-debian50-32.invisible-island.net ([unknown] [96.241.212.238]) by vms173001.mailsrvcs.net (Sun Java(tm) System Messaging Server 7u2-7.02 32bit (built Apr 16 2009)) with ESMTPA id <0LV8002ZKBFXKP85@vms173001.mailsrvcs.net> for freebsd-questions@freebsd.org; Fri, 25 Nov 2011 12:31:14 -0600 (CST) Received: from par-debian50-32.invisible-island.net (localhost [127.0.0.1]) by par-debian50-32.invisible-island.net (8.14.3/8.14.3/Debian-5+lenny1) with ESMTP id pAPIV9Ws009342 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Fri, 25 Nov 2011 13:31:09 -0500 Received: (from tom@localhost) by par-debian50-32.invisible-island.net (8.14.3/8.14.3/Submit) id pAPIV98N009340; Fri, 25 Nov 2011 13:31:09 -0500 Date: Fri, 25 Nov 2011 13:31:09 -0500 From: Thomas Dickey To: Moritz Wilhelmy Message-id: <20111125183109.GA9325@debian50-32.invisible-island.net> References: <20111125105901.GK16096@barfooze.de> <20111125113718.GA4064@debian50-32.invisible-island.net> <20111125120215.GL16096@barfooze.de> <20111125131915.GA5966@debian50-32.invisible-island.net> <20111125175821.GN16096@barfooze.de> MIME-version: 1.0 Content-type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="ikeVEW9yuYc//A+q" Content-disposition: inline In-reply-to: <20111125175821.GN16096@barfooze.de> User-Agent: Mutt/1.5.18 (2008-05-17) Cc: freebsd-questions@freebsd.org Subject: Re: No colours at all with ncurses and urxvt on FreeBSD 9.0-RC2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: dickey@his.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 18:31:15 -0000 --ikeVEW9yuYc//A+q Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Nov 25, 2011 at 06:58:21PM +0100, Moritz Wilhelmy wrote: > On Fri, Nov 25, 2011 at 08:19:15 -0500, Thomas Dickey wrote: > > well... rxvt-unicode-256color was the effect of the checkins for termca= p.src > > for conf/152713 and conf/153164 > >=20 > > The earlier one suggests that the naming came from rxvt-unicode's sourc= es. > > Checking that, it seems that the rxvt-unicode entry specifies 88 colors, > > while the rxvt-unicode-256color entry (close to rxvt-256color) does 256. > >=20 > > However, the rxvt-unicode entry in FreeBSD was added for conf/117323, > > which equated it to rxvt-mono (no color), with some changes for functio= n-keys. > >=20 > > On the other hand, the rxvt entry uses color, which was overlooked in > > conf/117323: > >=20 > > # Termcap entry for rxvt-unicode, taken from http://cvs.schmorp.de/rxvt= -unicode/doc/rxvt.7.html#I_need_a_termcap_file_entry > > rxvt-unicode|rxvt-unicode terminal (X Window System):\ > > :SF=3D\E[%dS:SR=3D\E[%dT:bw:ec=3D\E[%dX:kb=3D\177:kd=3D\EOB:ke=3D\E[?1= l\E>:\ > > :kl=3D\EOD:kr=3D\EOC:ks=3D\E[?1h\E=3D:ku=3D\EOA:lm#0:te=3D\E[r\E[?1049= l:\ > > :ti=3D\E[?1049h:tc=3Drxvt-mono: >=20 > And I already wondered why it was so short.. It's short because most of the content is in "rxvt-mono" (that "tc=3D" acts as an include). =20 > > rxvt|rxvt terminal emulator (X Window System):\ > > :pa#64:Co#8:AF=3D\E[3%dm:AB=3D\E[4%dm:op=3D\E[39;49m:tc=3Drxvt-mono: this also is short - the main difference between the two is that the latter has features for color (pa, Co, AF, AB and op). > > Following the clue from the comment, the example using no color was pre= sent > > in rxvt.7 until it was removed in version 9.05 of rxvt-unicode. The cu= rrent > > documentation contains no examples (the termcap/terminfo are only separ= ate > > files). >=20 > This sounds like a bug in FreeBSD's default termcap. Should I file a PR? yes -=20 --=20 Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net --ikeVEW9yuYc//A+q Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAk7P3u0ACgkQcCNT4PfkjtupawCgocNx4XRGp2km79yDw3V/6DY6 xBUAoIDNh9/spdrMb1bQnZaXjbS8oEmD =kyEC -----END PGP SIGNATURE----- --ikeVEW9yuYc//A+q-- From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 18:43:15 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3E62C1065670 for ; Fri, 25 Nov 2011 18:43:15 +0000 (UTC) (envelope-from terrence@mediamonks.net) Received: from mail.mediamonks.net (mail.mediamonks.net [217.195.117.200]) by mx1.freebsd.org (Postfix) with ESMTP id A2FA88FC08 for ; Fri, 25 Nov 2011 18:43:14 +0000 (UTC) X-CGP-Sophos: Scanned and found clean X-Abuse-Info: Send abuse reports about this email to abuse@mediamonks.net Received: from [145.99.104.70] (account terrence@mediamonks.com) by mail.mediamonks.net (CommuniGate Pro IMAP 5.4.2) with XMIT id 8116839; Fri, 25 Nov 2011 19:43:12 +0100 Date: Fri, 25 Nov 2011 19:43:11 +0100 Organization: MediaMonks B.V. Message-Id: <1189788ce6617f49a330c1605d186f01@mediamonks.net> In-Reply-To: <4ECFDE2A.4090609@my.gd> Thread-Topic: buildkernel not honoring WITH_MODULES from make.conf ? (was: Re: Quick build of stripped-down kernel) Priority: Normal Importance: normal X-MSMail-Priority: normal X-Priority: 3 Sensitivity: Normal Thread-Index: AcyrohTKFdkE9zsNTFeJLkvCWWB8VQ== From: "Terrence Koeman" To: "freebsd-questions@FreeBSD.org" X-MAPI-Message-Class: IPM.Note.SMIME.MultipartSigned X-Mailer: CommuniGate Pro MAPI Connector 1.52.54.6/1.54.0.6 MIME-Version: 1.0 Content-Type: multipart/signed; micalg=SHA1; protocol="application/x-pkcs7-signature"; boundary="----=_NextPart_000_0006_01CCABAA.76C42DA0" Cc: Damien Fleuriot Subject: RE: buildkernel not honoring WITH_MODULES from make.conf ? (was: Re: Quick build of stripped-down kernel) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 18:43:15 -0000 This is a multi-part message in MIME format. ------=_NextPart_000_0006_01CCABAA.76C42DA0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On Fri, 25 Nov 2011 at 19:27:54, Damien Fleuriot wrote: > On 11/24/11 4:17 PM, b. f. wrote: >> >> If you are going to build most of the modules, but only want to exclude >> a few, then add the directories of the modules to be excluded (relative >> to /usr/src/sys/modules) to WITHOUT_MODULES, for example in >> /etc/make.conf. If you are only going to build a few modules, and want >> to exclude the majority of the modules, then add the directories of the >> modules that are to be built to MODULES_OVERRIDE. For no modules at >> all, set NO_MODULES. See /usr/src/sys/modules/Makefile and >> /usr/src/sys/conf/kern.post.mk for details. You may also save some time >> by using one of your faster machines to build the OS for the slower >> machines. >> >> b. > > Have I misunderstood WITH_MODULES' use ? The answer is in the post you quoted: use MODULES_OVERRIDE. -- Regards, T. Koeman, MTh/BSc/BPsy; Technical Monk MediaMonks B.V. (www.mediamonks.com) Please quote relevant replies in correspondence. ------=_NextPart_000_0006_01CCABAA.76C42DA0 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIIAjCCA8ow ggKyoAMCAQICEEUuM5TRXSsqy2M6PXNSZ3kwDQYJKoZIhvcNAQEFBQAwgYIxCzAJBgNVBAYTAlVT MR4wHAYDVQQLExV3d3cueHJhbXBzZWN1cml0eS5jb20xJDAiBgNVBAoTG1hSYW1wIFNlY3VyaXR5 IFNlcnZpY2VzIEluYzEtMCsGA1UEAxMkWFJhbXAgR2xvYmFsIENlcnRpZmljYXRpb24gQXV0aG9y aXR5MB4XDTExMDcxNjE0MDEyOVoXDTEyMDcxNjE1MTY1N1owdzEgMB4GA1UEAxQXdGVycmVuY2VA bWVkaWFtb25rcy5uZXQxDjAMBgNVBAgTBXNtaW1lMQswCQYDVQQGEwJVUzEmMCQGCSqGSIb3DQEJ ARYXdGVycmVuY2VAbWVkaWFtb25rcy5uZXQxDjAMBgNVBAoTBXNtaW1lMIGfMA0GCSqGSIb3DQEB AQUAA4GNADCBiQKBgQChRrpOuDewU94nfT8orYLjRRWCXIpT5sBcc2/xSaI00SPo6HK/G33JNyFS 1yZT/oiCZvF9EsD9cF14+ymWpoZ+14BSHJ9SD5rldKRQ7ETHEifLnM64oCp8Mh8HjzO/AvycbONu hC/iS380VIZqddDZych9+IMtNRMO4nSBFMQ35QIDAQABo4HJMIHGMAkGA1UdEwQCMAAwHQYDVR0O BBYEFDWoOhnIHkcHhg0ftxrYRqHL7x0xMAsGA1UdDwQEAwIFoDATBgNVHSUEDDAKBggrBgEFBQcD BDA0BgNVHR8ELTArMCmgJ6AlhiNodHRwOi8vY3JsLnNlY3VyZXRydXN0LmNvbS9YR0NBLmNybDBC BgNVHSAEOzA5MDcGCmCGSAGG/WQCAgEwKTAnBggrBgEFBQcCARYbaHR0cDovL3NzbC50cnVzdHdh dmUuY29tL0NBMA0GCSqGSIb3DQEBBQUAA4IBAQCM74qzG599TkL+P5DKV9+ZnN1QzKEXSV4DEC+m dRgBfPLKFZ3eyJoqVyfZIZswXMtvR4lZB7wGG9QDn+AZDjdJqJ84DNMma+MiifSP2unYI7pqV/5/ 972/C8pvjLbiNSsMWmNMJKKfMAIEU+nLiNGfqlOj1Pz5WEz5ljgLRmivLWDAv3w/vcc9mCxTXbR1 TPhSA8UrNhlQLwy9L5dl408ILyVT4VblPbT/6TQn9pRlqtAiwkORnpadC4cH0uwK+NGnN9yarSJC 9SHPRujqNvMX61ojgXEOGhY1lyL7z2S4Jc6912Ezb9TbCT8MYlZ2ILKDwt+cpjhhONtWt35w7jDr MIIEMDCCAxigAwIBAgIQUJRs7Bjq1ZxN1ZfvdY+grTANBgkqhkiG9w0BAQUFADCBgjELMAkGA1UE BhMCVVMxHjAcBgNVBAsTFXd3dy54cmFtcHNlY3VyaXR5LmNvbTEkMCIGA1UEChMbWFJhbXAgU2Vj dXJpdHkgU2VydmljZXMgSW5jMS0wKwYDVQQDEyRYUmFtcCBHbG9iYWwgQ2VydGlmaWNhdGlvbiBB dXRob3JpdHkwHhcNMDQxMTAxMTcxNDA0WhcNMzUwMTAxMDUzNzE5WjCBgjELMAkGA1UEBhMCVVMx HjAcBgNVBAsTFXd3dy54cmFtcHNlY3VyaXR5LmNvbTEkMCIGA1UEChMbWFJhbXAgU2VjdXJpdHkg U2VydmljZXMgSW5jMS0wKwYDVQQDEyRYUmFtcCBHbG9iYWwgQ2VydGlmaWNhdGlvbiBBdXRob3Jp dHkwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCYJB69FbS638eMpSe2OAtp87ZOqCwu IR1cRN8hXX4jdP5efrRKt6atH67gBhbim1vZZ3RrXYCPKZ2GG9mcDZhtdhAoWORlsH9KmHmf4MMx foArtYzAQDsRhtDLooY2YKTVMIJt2W7QDxIEM5dfT2Fa8OT5kavnHTu86M/0ay00fOJIYRyO82FE zG+gSqmUsE3a56k0enI4qEHMPJQRfevIpoy3hsvKMzvZPTeL+3o+hiznc9cKV6xkmxnr9A8ECIqs AxcZZPRaJSKNNCyy9mgdEm3Tih4U2sSPpuIjhdV6Db1q4Ons7Be7QhtnqiXtRYMh/MHJfNViPvry xS3T/dRlAgMBAAGjgZ8wgZwwEwYJKwYBBAGCNxQCBAYeBABDAEEwCwYDVR0PBAQDAgGGMA8GA1Ud EwEB/wQFMAMBAf8wHQYDVR0OBBYEFMZPoj0GY4QJnM5i5ASsjVy16bYbMDYGA1UdHwQvMC0wK6Ap oCeGJWh0dHA6Ly9jcmwueHJhbXBzZWN1cml0eS5jb20vWEdDQS5jcmwwEAYJKwYBBAGCNxUBBAMC AQEwDQYJKoZIhvcNAQEFBQADggEBAJEVOQMBG2f7Shz5CmBbodpNl2L5JFMn14JkTpAuw0kbK5rc /Kh4ZzXxHfARvbdI4xD2Dd8/0sm2qlWkSLoC295ZLhVbO50WfUfXN+pfTXYSNrsf16GBBEYgoyxt qZ4Bfj8pzgCT3/3JknOJiWSe5yvkHJEs0rnOfc5vMZnT5r7SHpDwCRR5XCOrTdLaIR9NmXmd4c8n nxCbHIgNsIpkQTG4DmyQJKSbXHGPurt+HBvbaoAPIbzp26a3QPSyi6mx5O+aGtA9aZnuqCij4Tyz 8LIRnM98QObd50N9otg6tamN8jSZxNQQ4Qb9CYQQO+7ETPTsJ3xCwnR8gooJybQDJbwxggOxMIID rQIBATCBlzCBgjELMAkGA1UEBhMCVVMxHjAcBgNVBAsTFXd3dy54cmFtcHNlY3VyaXR5LmNvbTEk MCIGA1UEChMbWFJhbXAgU2VjdXJpdHkgU2VydmljZXMgSW5jMS0wKwYDVQQDEyRYUmFtcCBHbG9i YWwgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkCEEUuM5TRXSsqy2M6PXNSZ3kwCQYFKw4DAhoFAKCC Am8wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTExMTI1MTg0MzEx WjAjBgkqhkiG9w0BCQQxFgQUMQ7fE88psSwPxlV1wuXmd5IUhmMwgagGCSsGAQQBgjcQBDGBmjCB lzCBgjELMAkGA1UEBhMCVVMxHjAcBgNVBAsTFXd3dy54cmFtcHNlY3VyaXR5LmNvbTEkMCIGA1UE ChMbWFJhbXAgU2VjdXJpdHkgU2VydmljZXMgSW5jMS0wKwYDVQQDEyRYUmFtcCBHbG9iYWwgQ2Vy dGlmaWNhdGlvbiBBdXRob3JpdHkCEEUuM5TRXSsqy2M6PXNSZ3kwgaoGCyqGSIb3DQEJEAILMYGa oIGXMIGCMQswCQYDVQQGEwJVUzEeMBwGA1UECxMVd3d3LnhyYW1wc2VjdXJpdHkuY29tMSQwIgYD VQQKExtYUmFtcCBTZWN1cml0eSBTZXJ2aWNlcyBJbmMxLTArBgNVBAMTJFhSYW1wIEdsb2JhbCBD ZXJ0aWZpY2F0aW9uIEF1dGhvcml0eQIQRS4zlNFdKyrLYzo9c1JneTCBtwYJKoZIhvcNAQkPMYGp MIGmMAsGCWCGSAFlAwQBKjALBglghkgBZQMEARYwCgYIKoZIhvcNAwcwCwYJYIZIAWUDBAECMA4G CCqGSIb3DQMCAgIAgDAHBgUrDgMCBzANBggqhkiG9w0DAgIBQDANBggqhkiG9w0DAgIBKDAHBgUr DgMCGjALBglghkgBZQMEAgMwCwYJYIZIAWUDBAICMAsGCWCGSAFlAwQCATAKBggqhkiG9w0CBTAN BgkqhkiG9w0BAQEFAASBgHKzkx9gHWVik6gaNB+61pIUkm2OntNwRkw3XCixkARAmgmSc8LZvIrm mI6OArbl6ZlO4zdScoPyZhpEPDITBqGZh8yj0cJTQNNAXEKiPgOY5YPn6JfJenTtUd0WNAlJdurS ObL3+oQuyuiGZb3Sv/S+JbsjjEY34f450ZgNCuqCAAAAAAAA ------=_NextPart_000_0006_01CCABAA.76C42DA0-- From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 20:30:02 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 72D20106566B for ; Fri, 25 Nov 2011 20:30:02 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (wonkity.com [67.158.26.137]) by mx1.freebsd.org (Postfix) with ESMTP id 134128FC0A for ; Fri, 25 Nov 2011 20:30:01 +0000 (UTC) Received: from wonkity.com (localhost [127.0.0.1]) by wonkity.com (8.14.5/8.14.5) with ESMTP id pAPKTpsE081413; Fri, 25 Nov 2011 13:29:51 -0700 (MST) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.14.5/8.14.5/Submit) with ESMTP id pAPKTpc0081410; Fri, 25 Nov 2011 13:29:51 -0700 (MST) (envelope-from wblock@wonkity.com) Date: Fri, 25 Nov 2011 13:29:51 -0700 (MST) From: Warren Block To: Robert In-Reply-To: <20111125095457.477e9501@dell64> Message-ID: References: <201111241116.pAOBGH4i098240@fire.js.berklix.net> <20111124113938.2d99eec2@dell64> <20111125095457.477e9501@dell64> User-Agent: Alpine 2.00 (BSF 1167 2008-08-23) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.7 (wonkity.com [127.0.0.1]); Fri, 25 Nov 2011 13:29:51 -0700 (MST) Cc: "Julian H. Stacey" , questions@freebsd.org Subject: Re: Invalid fdisk partition table found (fwd) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 20:30:02 -0000 On Fri, 25 Nov 2011, Robert wrote: > On Thu, 24 Nov 2011 13:45:37 -0700 (MST) > Warren Block wrote: > >> On Thu, 24 Nov 2011, Robert wrote: >> >>> [robert@dell64] ~> sudo gpart destroy -F da1 >>> da1 destroyed >>> >>> [robert@dell64] ~> fdisk /dev/da1 >>> ******* Working on device /dev/da1 ******* >>> parameters extracted from in-core disklabel are: >>> cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) >>> >>> parameters to be used for BIOS calculations are: >>> cylinders=29 heads=64 sectors/track=32 (2048 blks/cyl) >>> >>> fdisk: invalid fdisk partition table found >> >> The partition table was cleared. >> >>> Media sector size is 512 >>> Warning: BIOS sector numbering starts with sector 1 >>> Information from DOS bootblock is: >>> The data for partition 1 is: >>> sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) >>> start 32, size 59360 (28 Meg), flag 80 (active) >>> beg: cyl 0/ head 1/ sector 1; >>> end: cyl 28/ head 63/ sector 32 >> >> And it starts with a default table equal to the size of the drive. > > Is it supposed to still show sysid 165 ? > > I was under the impression that dd if=/dev/zero would clean out > everything including sector 1. The partition table was cleared, that's why it said "invalid fdisk partition table found". Rather than starting with an invalid table, it created a valid default table in memory. >> Do both cards report the same size? > > Yes..sort of 28, 29 MB If they weren't the same, I was going to suggest maybe they've been heavily used and worn out. But I don't know if capacity shrinks as blocks go bad and spares are used up, or if they just quit working. And I'd expect them to be very different unless they had the exact same usage, like in a mirror. > OT. The last 2 times that I have sent replies to two list regarding this > question, I have not seen it come through to me. Julian's relies as > well as yours come through. Maybe spam or duplicate filtering. From owner-freebsd-questions@FreeBSD.ORG Fri Nov 25 22:28:56 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F2A8E106566C for ; Fri, 25 Nov 2011 22:28:56 +0000 (UTC) (envelope-from jau@jau.iki.fi) Received: from jau.iki.fi (ip193-64-26-117.cust.eunet.fi [193.64.26.117]) by mx1.freebsd.org (Postfix) with ESMTP id 59E668FC0C for ; Fri, 25 Nov 2011 22:28:55 +0000 (UTC) Received: from jau.iki.fi (localhost [127.0.0.1]) by jau.iki.fi (8.14.5/8.14.5) with ESMTP id pAPMSrhm046576 for ; Sat, 26 Nov 2011 00:28:53 +0200 (EET) (envelope-from jau@jau.iki.fi) Received: (from jau@localhost) by jau.iki.fi (8.14.5/8.14.5/Submit) id pAPMSrQr046575 for questions@freebsd.org; Sat, 26 Nov 2011 00:28:53 +0200 (EET) (envelope-from jau) Message-Id: <201111252228.pAPMSrQr046575@jau.iki.fi> To: questions@freebsd.org Date: Sat, 26 Nov 2011 00:28:53 +0200 (EET) From: jau@iki.fi (Jukka A. Ukkonen) Sender: jau@iki.fi Latin-Date: dies Saturni XXVI Novembrie a.d. MMXI Organization: Private person OS-Platform: FreeBSD Phone: +358-9-6215280 (home) / +358-500-606671 (gsm) Content-Conversion: prohibited X-Mailer: ELM [version 2.4 PL25+pgp] MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.2.7 (jau.iki.fi [127.0.0.1]); Sat, 26 Nov 2011 00:28:53 +0200 (EET) Cc: Subject: What might be causing this during during buildworld in 7.4-STABLE ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: jau@iki.fi List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Nov 2011 22:28:57 -0000 I keep persistently getting this for no obvious reason... ===> gnu/usr.bin/texinfo/makeinfo (installincludes) ===> gnu/usr.bin/texinfo/info (installincludes) ===> gnu/usr.bin/texinfo/infokey (installincludes) ===> gnu/usr.bin/texinfo/install-info (installincludes) ===> gnu/usr.bin/texinfo/texindex (installincludes) ===> gnu/usr.bin/texinfo/doc (installincludes) 1 error *** Error code 2 1 error *** Error code 2 1 error Exit 2 And before anyone asks... Yes, it has been against the latest daily patches (csup), and it is still repeating after several days now. The "uname -a" line for the system is ... FreeBSD mjolnir 7.4-STABLE FreeBSD 7.4-STABLE #0: Sun Nov 13 18:30:46 EET 2011 root@mjolnir.thunderbolt.fi:/usr/obj/usr/src/sys/Mjolnir i386 Any ideas would be welcome. Cheers, // jau .--- ..- -.- -.- .- .- .-.-.- ..- -.- -.- --- -. . -. / Jukka A. Ukkonen, Oxit Ltd, Finland /__ M.Sc. (sw-eng & cs) (Phone) +358-500-606-671 / Internet: Jukka.Ukkonen(a)Oxit.Fi / Internet: jau(a)iki.fi v .--- .- ..- ...-.- .. -.- .. .-.-.- ..-. .. + + + + My opinions are mine and mine alone, not my employers. + + + + From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 09:01:59 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 87D961065670 for ; Sat, 26 Nov 2011 09:01:59 +0000 (UTC) (envelope-from peter@aboutsupport.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 1DF888FC15 for ; Sat, 26 Nov 2011 09:01:58 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so6910218bkb.13 for ; Sat, 26 Nov 2011 01:01:58 -0800 (PST) Received: by 10.204.151.144 with SMTP id c16mr3720986bkw.45.1322298117798; Sat, 26 Nov 2011 01:01:57 -0800 (PST) Received: from [10.30.1.82] (itd.asap.bg. [94.155.40.186]) by mx.google.com with ESMTPS id i3sm31423270fah.11.2011.11.26.01.01.56 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 26 Nov 2011 01:01:56 -0800 (PST) Message-ID: <4ED0AB02.4010703@aboutsupport.com> Date: Sat, 26 Nov 2011 11:01:54 +0200 From: Peter User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: ADAPTEC issue ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 09:01:59 -0000 Hello, I am running FreeBSD 9.0 RC2 pmgalleries01# uname -a FreeBSD pmgalleries01 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 26 03:51:14 EST 2011 root@pmgalleries01:/usr/obj/usr/src/sys/ASAP amd64 SCSI RAID card Adaptec in RAID 5. After server boot after almost no load I start to see such errors. I also have the feeling when installing ports that when extracting ports sometimes operation is very slow. I plan to make this machine productiion with quite busy lighttpd on it. These are the errors messages. I googled around , there are some threads, but no solution provided. Is it possible FreeBSD simplt to be incompatible with this machine(raid card). Peter Nov 26 04:05:32 pmgalleries01 kernel: 472 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] Nov 26 04:05:32 pmgalleries01 kernel: 450 FIFO_USE[0x0] SCB_CONTROL[0x68]:(STATUS_RCVD|TAG_ENB|DISCENB) Nov 26 04:05:32 pmgalleries01 kernel: SCB_SCSIID[0x7] Nov 26 04:05:32 pmgalleries01 kernel: Total 64 Nov 26 04:05:32 pmgalleries01 kernel: Kernel Free SCB lists: Nov 26 04:05:32 pmgalleries01 kernel: Any Device: 447 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 Nov 26 04:05:32 pmgalleries01 kernel: 95 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Nov 26 04:05:32 pmgalleries01 kernel: Sequencer Complete DMA-inprog list: Nov 26 04:05:32 pmgalleries01 kernel: Sequencer Complete list: Nov 26 04:05:32 pmgalleries01 kernel: Sequencer DMA-Up and Complete list: Nov 26 04:05:32 pmgalleries01 kernel: Sequencer On QFreeze and Complete list: Nov 26 04:05:32 pmgalleries01 kernel: Nov 26 04:05:32 pmgalleries01 kernel: Nov 26 04:05:32 pmgalleries01 kernel: ahd0: FIFO0 Active, LONGJMP == 0x8277, SCB 0x1d8 Nov 26 04:05:32 pmgalleries01 kernel: SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) Nov 26 04:05:32 pmgalleries01 kernel: SEQINTSRC[0x10]:(CFG4DATA) DFCNTRL[0x4]:(DIRECTION) Nov 26 04:05:32 pmgalleries01 kernel: DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) Nov 26 04:05:32 pmgalleries01 kernel: SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x3f] MDFFSTAT[0x2]:(DATAINFIFO) Nov 26 04:05:32 pmgalleries01 kernel: SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 Nov 26 04:05:32 pmgalleries01 kernel: CCSGCTL[0x10]:(SG_CACHE_AVAIL) Nov 26 04:05:32 pmgalleries01 kernel: Nov 26 04:05:32 pmgalleries01 kernel: ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x1ff Nov 26 04:05:32 pmgalleries01 kernel: SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) Nov 26 04:05:32 pmgalleries01 kernel: SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) Nov 26 04:05:32 pmgalleries01 kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] Nov 26 04:05:32 pmgalleries01 kernel: SOFFCNT[0x3f] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 Nov 26 04:05:32 pmgalleries01 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x0] Nov 26 04:05:32 pmgalleries01 kernel: LQIN: 0x5 0x0 0x1 0xd8 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x80 0x0 0x0 0x0 0x2 0x0 Nov 26 04:05:32 pmgalleries01 kernel: ahd0: LQISTATE = 0x30, LQOSTATE = 0x0, OPTIONMODE = 0x42 Nov 26 04:05:32 pmgalleries01 kernel: ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 Nov 26 04:05:32 pmgalleries01 kernel: ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 Nov 26 04:05:32 pmgalleries01 kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR) Nov 26 04:05:32 pmgalleries01 kernel: CCSCBCTL[0x0] Nov 26 04:05:32 pmgalleries01 kernel: ahd0: REG0 == 0x1db, SINDEX = 0x113, DINDEX = 0x102 Nov 26 04:05:32 pmgalleries01 kernel: ahd0: SCBPTR == 0x1da, SCB_NEXT == 0x1db, SCB_NEXT2 == 0x1db Nov 26 04:05:32 pmgalleries01 kernel: CDB 2a 0 5 26 21 a2 Nov 26 04:05:32 pmgalleries01 kernel: STACK: 0xde 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Nov 26 04:05:32 pmgalleries01 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): Task Management Func 0x1 Complete Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): no longer in timeout, status = 24b Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): SCB 463 - timed out Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): Queuing a BDR SCB Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): Task Management Func 0x1 Complete Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): no longer in timeout, status = 24b From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 09:25:20 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 474CA1065670 for ; Sat, 26 Nov 2011 09:25:20 +0000 (UTC) (envelope-from peter@aboutsupport.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id CEAFA8FC0C for ; Sat, 26 Nov 2011 09:25:19 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so6933891bkb.13 for ; Sat, 26 Nov 2011 01:25:18 -0800 (PST) Received: by 10.204.129.70 with SMTP id n6mr38157072bks.0.1322299516858; Sat, 26 Nov 2011 01:25:16 -0800 (PST) Received: from [10.30.1.82] (itd.asap.bg. [94.155.40.186]) by mx.google.com with ESMTPS id e20sm31493719fab.2.2011.11.26.01.25.15 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 26 Nov 2011 01:25:15 -0800 (PST) Message-ID: <4ED0B07A.8010104@aboutsupport.com> Date: Sat, 26 Nov 2011 11:25:14 +0200 From: Peter User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" References: <4ED0AB02.4010703@aboutsupport.com> In-Reply-To: <4ED0AB02.4010703@aboutsupport.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: ADAPTEC issue ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 09:25:20 -0000 Sorry, I was inaccurate. Controller is Intel SRCU41L http://ark.intel.com/products/5985/Intel-RAID-Controller-SRCU41L Peter On 26.11.2011 11:01, Peter wrote: > Hello, > > I am running FreeBSD 9.0 RC2 > > pmgalleries01# uname -a > FreeBSD pmgalleries01 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 26 03:51:14 > EST 2011 root@pmgalleries01:/usr/obj/usr/src/sys/ASAP amd64 > > SCSI RAID card Adaptec in RAID 5. > > After server boot after almost no load I start to see such errors. > > I also have the feeling when installing ports that when extracting ports > sometimes operation is very slow. I plan to make this machine > productiion with quite busy lighttpd on it. > > These are the errors messages. I googled around , there are some > threads, but no solution provided. Is it possible FreeBSD simplt to be > incompatible with this machine(raid card). > > Peter > > > Nov 26 04:05:32 pmgalleries01 kernel: 472 FIFO_USE[0x0] > SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] > Nov 26 04:05:32 pmgalleries01 kernel: 450 FIFO_USE[0x0] > SCB_CONTROL[0x68]:(STATUS_RCVD|TAG_ENB|DISCENB) > Nov 26 04:05:32 pmgalleries01 kernel: SCB_SCSIID[0x7] > Nov 26 04:05:32 pmgalleries01 kernel: Total 64 > Nov 26 04:05:32 pmgalleries01 kernel: Kernel Free SCB lists: > Nov 26 04:05:32 pmgalleries01 kernel: Any Device: 447 257 258 259 260 > 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 > 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 > 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 > 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 > 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 > 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 > 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 > 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 > 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 > 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 > 441 442 443 444 445 446 256 255 254 253 252 251 250 249 248 247 246 245 > 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 228 227 > 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 > 208 207 206 205 204 203 202 201 200 199 198 197 > Nov 26 04:05:32 pmgalleries01 kernel: 95 194 193 192 191 190 189 188 187 > 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 > 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 152 151 > 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 > 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 > 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 > 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 > 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 > 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 > 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 > Nov 26 04:05:32 pmgalleries01 kernel: Sequencer Complete DMA-inprog list: > Nov 26 04:05:32 pmgalleries01 kernel: Sequencer Complete list: > Nov 26 04:05:32 pmgalleries01 kernel: Sequencer DMA-Up and Complete list: > Nov 26 04:05:32 pmgalleries01 kernel: Sequencer On QFreeze and Complete > list: > Nov 26 04:05:32 pmgalleries01 kernel: > Nov 26 04:05:32 pmgalleries01 kernel: > Nov 26 04:05:32 pmgalleries01 kernel: ahd0: FIFO0 Active, LONGJMP == > 0x8277, SCB 0x1d8 > Nov 26 04:05:32 pmgalleries01 kernel: > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) > Nov 26 04:05:32 pmgalleries01 kernel: SEQINTSRC[0x10]:(CFG4DATA) > DFCNTRL[0x4]:(DIRECTION) > Nov 26 04:05:32 pmgalleries01 kernel: > DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) > Nov 26 04:05:32 pmgalleries01 kernel: SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x3f] MDFFSTAT[0x2]:(DATAINFIFO) > Nov 26 04:05:32 pmgalleries01 kernel: SHADDR = 0x00, SHCNT = 0x0 HADDR = > 0x00, HCNT = 0x0 > Nov 26 04:05:32 pmgalleries01 kernel: CCSGCTL[0x10]:(SG_CACHE_AVAIL) > Nov 26 04:05:32 pmgalleries01 kernel: > Nov 26 04:05:32 pmgalleries01 kernel: ahd0: FIFO1 Free, LONGJMP == > 0x8063, SCB 0x1ff > Nov 26 04:05:32 pmgalleries01 kernel: > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) > Nov 26 04:05:32 pmgalleries01 kernel: SEQINTSRC[0x0] DFCNTRL[0x0] > DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) > Nov 26 04:05:32 pmgalleries01 kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG) > SG_STATE[0x0] DFFSXFRCTL[0x0] > Nov 26 04:05:32 pmgalleries01 kernel: SOFFCNT[0x3f] > MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 > Nov 26 04:05:32 pmgalleries01 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x0] > Nov 26 04:05:32 pmgalleries01 kernel: LQIN: 0x5 0x0 0x1 0xd8 0x0 0x0 0x0 > 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x80 0x0 0x0 0x0 0x2 0x0 > Nov 26 04:05:32 pmgalleries01 kernel: ahd0: LQISTATE = 0x30, LQOSTATE = > 0x0, OPTIONMODE = 0x42 > Nov 26 04:05:32 pmgalleries01 kernel: ahd0: OS_SPACE_CNT = 0x20 > MAXCMDCNT = 0x0 > Nov 26 04:05:32 pmgalleries01 kernel: ahd0: SAVED_SCSIID = 0x0 SAVED_LUN > = 0x0 > Nov 26 04:05:32 pmgalleries01 kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR) > Nov 26 04:05:32 pmgalleries01 kernel: CCSCBCTL[0x0] > Nov 26 04:05:32 pmgalleries01 kernel: ahd0: REG0 == 0x1db, SINDEX = > 0x113, DINDEX = 0x102 > Nov 26 04:05:32 pmgalleries01 kernel: ahd0: SCBPTR == 0x1da, SCB_NEXT == > 0x1db, SCB_NEXT2 == 0x1db > Nov 26 04:05:32 pmgalleries01 kernel: CDB 2a 0 5 26 21 a2 > Nov 26 04:05:32 pmgalleries01 kernel: STACK: 0xde 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 > Nov 26 04:05:32 pmgalleries01 kernel: <<<<<<<<<<<<<<<<< Dump Card State > Ends >>>>>>>>>>>>>>>>>> > Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): Task Management > Func 0x1 Complete > Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): no longer in > timeout, status = 24b > Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): SCB 463 - timed out > Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): Queuing a BDR SCB > Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): Task Management > Func 0x1 Complete > Nov 26 04:05:32 pmgalleries01 kernel: (da0:ahd0:0:0:0): no longer in > timeout, status = 24b From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 11:18:44 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 07AEF106566C for ; Sat, 26 Nov 2011 11:18:44 +0000 (UTC) (envelope-from ml@my.gd) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 8E6888FC13 for ; Sat, 26 Nov 2011 11:18:42 +0000 (UTC) Received: by bkbzs8 with SMTP id zs8so7059679bkb.13 for ; Sat, 26 Nov 2011 03:18:41 -0800 (PST) Received: by 10.205.135.133 with SMTP id ig5mr11139740bkc.84.1322306320528; Sat, 26 Nov 2011 03:18:40 -0800 (PST) Received: from dfleuriot.local (did75-17-88-165-130-96.fbx.proxad.net. [88.165.130.96]) by mx.google.com with ESMTPS id z15sm21327823bkv.4.2011.11.26.03.18.38 (version=SSLv3 cipher=OTHER); Sat, 26 Nov 2011 03:18:39 -0800 (PST) Message-ID: <4ED0CB0D.80302@my.gd> Date: Sat, 26 Nov 2011 12:18:37 +0100 From: Damien Fleuriot User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: Terrence Koeman References: <1189788ce6617f49a330c1605d186f01@mediamonks.net> In-Reply-To: <1189788ce6617f49a330c1605d186f01@mediamonks.net> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: "freebsd-questions@FreeBSD.org" Subject: Re: buildkernel not honoring WITH_MODULES from make.conf ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 11:18:44 -0000 On 11/25/11 7:43 PM, Terrence Koeman wrote: > On Fri, 25 Nov 2011 at 19:27:54, Damien Fleuriot wrote: > >> On 11/24/11 4:17 PM, b. f. wrote: >>> >>> If you are going to build most of the modules, but only want to exclude >>> a few, then add the directories of the modules to be excluded (relative >>> to /usr/src/sys/modules) to WITHOUT_MODULES, for example in >>> /etc/make.conf. If you are only going to build a few modules, and want >>> to exclude the majority of the modules, then add the directories of the >>> modules that are to be built to MODULES_OVERRIDE. For no modules at >>> all, set NO_MODULES. See /usr/src/sys/modules/Makefile and >>> /usr/src/sys/conf/kern.post.mk for details. You may also save some time >>> by using one of your faster machines to build the OS for the slower >>> machines. >>> >>> b. >> >> Have I misunderstood WITH_MODULES' use ? > > The answer is in the post you quoted: use MODULES_OVERRIDE. > Meh, I was so sure I was supposed to use "WITH_MODULES" in opposition with "WITHOUT_MODULES" that I totally overlooked "MODULES_OVERRIDE". Ty, that's going to solve my problem. From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 12:08:56 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 36511106566B for ; Sat, 26 Nov 2011 12:08:56 +0000 (UTC) (envelope-from mueller6727@bellsouth.net) Received: from fmailhost05.isp.att.net (fmailhost05.isp.att.net [207.115.11.55]) by mx1.freebsd.org (Postfix) with ESMTP id 248E78FC14 for ; Sat, 26 Nov 2011 12:08:55 +0000 (UTC) Date: Sat, 26 Nov 2011 12:00:51 +0000 (GMT) X-Comment: Sending client does not conform to RFC822 minimum requirements X-Comment: Date has been added by Maillennium Received: from localhost (adsl-68-210-130-165.sdf.bellsouth.net[68.210.130.165]) by isp.att.net (frfwmhc05) with SMTP id <20111126120051H0500dtr9ke>; Sat, 26 Nov 2011 12:00:51 +0000 X-Originating-IP: [68.210.130.165] From: "Thomas Mueller" To: freebsd-questions@FreeBSD.org Message-Id: <20111126120856.36511106566B@hub.freebsd.org> Cc: Lowell Gilbert Subject: Re: "options atapicam" and/or "device ATA_CAM" in kernel config? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 12:08:56 -0000 "Thomas Mueller" writes: > > What is the role of "options atapicam" and "device ATA_CAM" in kernel config file? > > Are they redundant? Kernel will build with both these options, but will it make things go awry? Is ATA_CAM deprecated? Lowell Gilbert responds: > As far as I can see, ATA_CAM isn't currently documented. > Just ignore it. So I can say good riddance to ATA_CAM. According to burncd man page, ATA_CAM is incompatible with burncd, also burncd was deprecated in FreeBSD 9.0. > > I am trying to burn a CD (or DVD) on a SATA DVD-RW drive, but cdrtools don't work. > > Also, how do I build and install a kernel to some name other than /boot/kernel, and not build all modules in duplicate? > > > > I might want to try kernels with some differences in options, but with the same modules. > > NetBSD and Linux make it easy to choose a non-default name for the kernel, so I can have multiple kernels and choose one at boot. > The usual way is to have a separate config file for each, although you > can come up with other ways if you feel like being clever. The config > files support an include functionality, so working through the files is > pretty easy. I would likely keep separate config files, especially when disk space is abundant as on a 3 TB hard drive. > As for leaving out modules, there are a number of options documented for > make.conf(5) and src.conf(5) that give you various kinds of control. > > In Linux, beginning with kernels 2.6.*, cdrtools work without the ATA-SCSI dance. > You don't say what version of FreeBSD you're on. I'm still using > RELENG_8, so I may be missing some choices for later versions, where I > understand that the CAM code has been significantly reworked. I forgot to mention the FreeBSD version: 9.0, now RC2, started with BETA1 on this computer. I have FreeBSD 8.2 on my older computer, ATA, no SATA. I once burned a CD with burncd after NetBSD cdrecord couldn't find the drive. But I burned other CDs with cdrecord in Linux. I don't want to upgrade FreeBSD on older computer because of shortage of disk space and only 256 MB RAM. Portupgrading everything would be too gruesomely slow, in addition to likely running short of disk space. Tom From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 12:24:24 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4ECDF1065782 for ; Sat, 26 Nov 2011 12:24:24 +0000 (UTC) (envelope-from mueller6727@bellsouth.net) Received: from fmailhost06.isp.att.net (fmailhost06.isp.att.net [204.127.217.106]) by mx1.freebsd.org (Postfix) with ESMTP id 3D0CC8FC0A for ; Sat, 26 Nov 2011 12:24:24 +0000 (UTC) Date: Sat, 26 Nov 2011 12:24:23 +0000 (GMT) X-Comment: Sending client does not conform to RFC822 minimum requirements X-Comment: Date has been added by Maillennium Received: from localhost (adsl-68-210-130-165.sdf.bellsouth.net[68.210.130.165]) by isp.att.net (frfwmhc06) with SMTP id <20111126122422H0600a7jjke>; Sat, 26 Nov 2011 12:24:23 +0000 X-Originating-IP: [68.210.130.165] From: "Thomas Mueller" To: freebsd-questions@FreeBSD.org References: Message-Id: <20111126122424.4ECDF1065782@hub.freebsd.org> Cc: "b. f." Subject: Re: Quick build of stripped-down kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 12:24:24 -0000 from "b. f." : > If the kernel versions were compatible, and the set of modules were > the same, I suppose you could set MODULES_WITH_WORLD and > KODIR=/boot/modules during buildworld and installworld, to build the > modules as part of buildworld and install them in /boot/modules during > installworld, rather than in /boot/kernel or /boot/kernel2. Then you > could build and install both of your kernels with NO_MODULES, as > previously discussed, and with your different choices of KODIR for > each kernel. Because /boot/modules is part of the default module_path > defined in /boot/defaults/loader.conf, the modules ought to load as > usual for either kernel. If you wanted to place them in a different > directory, you could alter KODIR during buildworld and installworld, > and add the directory to module_path in /boot/loader.conf. I haven't > tested this, but I think that it will work, and I'd be interested to > hear whether it does. There are of course alternative methods. > b. That should be helpful; I could do that when FreeBSD 9.0-RC3 comes out. I would only use the single set of modules when kernels are built from the same source tree; otherwise there could be incompatibility. I might also want to build FreeBSD 9.0-RELEASE, when that comes out, for i386, on a 16 GB USB stick, and run on new computer and older 32-bit computer. Older computer USB is not directly bootable, but USB can be booted using PLOP boot manager (http://www.plop.at/). Tom From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 15:44:33 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E72F4106566B for ; Sat, 26 Nov 2011 15:44:33 +0000 (UTC) (envelope-from moritz@wzff.de) Received: from barfooze.de (unknown [IPv6:2a01:4f8:7d:200:0:4e2e:75d4:1]) by mx1.freebsd.org (Postfix) with ESMTP id 8D0B28FC16 for ; Sat, 26 Nov 2011 15:44:33 +0000 (UTC) Received: from localhost.localdomain ([127.0.0.1] helo=barfooze.de) by barfooze.de with smtp (Exim 4.76) (envelope-from ) id 1RUKQQ-0001zL-QM for freebsd-questions@freebsd.org; Sat, 26 Nov 2011 16:44:32 +0100 Date: Sat, 26 Nov 2011 16:44:22 +0100 From: Moritz Wilhelmy To: freebsd-questions@freebsd.org Message-ID: <20111126154422.GR16096@barfooze.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.21 (2010-09-15) Subject: Disable automatic "Fallback" IP on 9.0-RC2 when a hostname cannot be resolved X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 15:44:34 -0000 Hello, my 9.0-RC2 installation on furnace.wzff.de keeps connecting to wzff.de if a hostname cannot be resolved. E.g. telnet foobar 25 connects me to the SMTP server on wzff.de, same thing for another jail that uses a subdomain of barfooze.de and tries to connect to barfooze.de if it can't find a suitable DNS or /etc/hosts record. I dislike when computers try to be smart like this, and I can't really think how this is useful, and it also doesn't happen on another machine that has a subdomain of something set as hostname and is running 8.2, so I want to disable it. Can anyone give me a hint how to do it? If you can't, which of the numerous mailing lists would be the right one to contact in this case? This is 9.0-RC2 on amd64, last updated 2011-11-09. Best regards, Moritz From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 16:46:49 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A3EED1065670 for ; Sat, 26 Nov 2011 16:46:49 +0000 (UTC) (envelope-from editor@d3photography.com) Received: from server.cwis.biz (70-89-202-5-invergrove-mn.hfc.comcastbusiness.net [70.89.202.5]) by mx1.freebsd.org (Postfix) with ESMTP id 794EC8FC0C for ; Sat, 26 Nov 2011 16:46:49 +0000 (UTC) Received: from server.cwis.biz (localhost [127.0.0.1]) by server.cwis.biz (Postfix) with ESMTP id D75E32791A9B; Sat, 26 Nov 2011 10:52:24 -0600 (CST) X-Virus-Scanned: amavisd-new at cwis.biz Received: from server.cwis.biz ([127.0.0.1]) by server.cwis.biz (server.cwis.biz [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 1-fA5S8NMBSf; Sat, 26 Nov 2011 10:52:12 -0600 (CST) Received: from [10.0.1.9] (70-89-202-1-invergrove-mn.hfc.comcastbusiness.net [70.89.202.1]) by server.cwis.biz (Postfix) with ESMTPSA id 393FD2791A98; Sat, 26 Nov 2011 10:52:12 -0600 (CST) Mime-Version: 1.0 (Apple Message framework v1251.1) Content-Type: text/plain; charset=us-ascii From: Ryan Coleman In-Reply-To: <20111126154422.GR16096@barfooze.de> Date: Sat, 26 Nov 2011 10:46:35 -0600 Content-Transfer-Encoding: quoted-printable Message-Id: <46A029F7-3898-4B12-8560-0F04A68E49AA@d3photography.com> References: <20111126154422.GR16096@barfooze.de> To: Moritz Wilhelmy X-Mailer: Apple Mail (2.1251.1) Cc: freebsd-questions@freebsd.org Subject: Re: Disable automatic "Fallback" IP on 9.0-RC2 when a hostname cannot be resolved X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 16:46:49 -0000 Change your DNS server to Google (8.8.8.8 and 8.8.4.4). It's your DNS providers' doing. On Nov 26, 2011, at 9:44 AM, Moritz Wilhelmy wrote: > Hello, >=20 > my 9.0-RC2 installation on furnace.wzff.de keeps connecting to wzff.de > if a hostname cannot be resolved. E.g. telnet foobar 25 connects me to > the SMTP server on wzff.de, same thing for another jail that uses a > subdomain of barfooze.de and tries to connect to barfooze.de if it = can't > find a suitable DNS or /etc/hosts record. >=20 > I dislike when computers try to be smart like this, and I can't really > think how this is useful, and it also doesn't happen on another = machine > that has a subdomain of something set as hostname and is running 8.2, = so > I want to disable it. Can anyone give me a hint how to do it? > If you can't, which of the numerous mailing lists would be the right = one > to contact in this case? >=20 > This is 9.0-RC2 on amd64, last updated 2011-11-09. >=20 >=20 > Best regards, >=20 > Moritz > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 17:18:07 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6F0E1106566C for ; Sat, 26 Nov 2011 17:18:07 +0000 (UTC) (envelope-from gmx@ross.cx) Received: from www81.your-server.de (www81.your-server.de [213.133.104.81]) by mx1.freebsd.org (Postfix) with ESMTP id 2FCC58FC1C for ; Sat, 26 Nov 2011 17:18:06 +0000 (UTC) Received: from [188.108.235.211] (helo=michael-think) by www81.your-server.de with esmtpsa (TLSv1:AES256-SHA:256) (Exim 4.72) (envelope-from ) id 1RULt7-00012R-Bz; Sat, 26 Nov 2011 18:18:05 +0100 Content-Type: text/plain; charset=iso-8859-15; format=flowed; delsp=yes To: freebsd-questions@freebsd.org, "Moritz Wilhelmy" References: <20111126154422.GR16096@barfooze.de> Date: Sat, 26 Nov 2011 18:18:00 +0100 MIME-Version: 1.0 Content-Transfer-Encoding: 7bit From: "Michael Ross" Message-ID: In-Reply-To: <20111126154422.GR16096@barfooze.de> User-Agent: Opera Mail/11.52 (Win32) X-Authenticated-Sender: gmx@ross.cx X-Virus-Scanned: Clear (ClamAV 0.97.3/13991/Sat Nov 26 00:07:28 2011) Cc: Subject: Re: Disable automatic "Fallback" IP on 9.0-RC2 when a hostname cannot be resolved X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 17:18:07 -0000 Am 26.11.2011, 16:44 Uhr, schrieb Moritz Wilhelmy : > Hello, > > my 9.0-RC2 installation on furnace.wzff.de keeps connecting to wzff.de > if a hostname cannot be resolved. E.g. telnet foobar 25 connects me to > the SMTP server on wzff.de, same thing for another jail that uses a > subdomain of barfooze.de and tries to connect to barfooze.de if it can't > find a suitable DNS or /etc/hosts record. > > I dislike when computers try to be smart like this, and I can't really > think how this is useful, and it also doesn't happen on another machine > that has a subdomain of something set as hostname and is running 8.2, so > I want to disable it. Can anyone give me a hint how to do it? Add e. g. ``search local'' to /etc/resolv.conf. The behaviour is explained in man resolv.conf, "search". Or disable wildcard entries in your dns server config. Regards, Michael From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 18:28:35 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 417BB106564A for ; Sat, 26 Nov 2011 18:28:35 +0000 (UTC) (envelope-from rpistanbulbilisim@setrow.com) Received: from mgw04-79.relay04.setrow.com (mgw04-79.relay04.setrow.com [92.45.72.241]) by mx1.freebsd.org (Postfix) with ESMTP id 239168FC08 for ; Sat, 26 Nov 2011 18:28:33 +0000 (UTC) Received: by mgw04-79.relay04.setrow.com (PowerMTA(TM) v3.5r15) id hq4nt412p1cm for ; Sat, 26 Nov 2011 20:28:32 +0200 (envelope-from ) Date: Sat, 26 Nov 2011 20:28:24 +0200 To: questions@freebsd.org From: =?utf-8?Q?=C4=B0stanbul_Bili=C5=9Fim?= Message-ID: <211cbd1552c41f904d0ee3d685a41f86@www.setrow.com> X-Priority: 3 X-Mailer: Setrow Importance: Normal Precedence: bulk X-MAIL-INFORMATION: 47080980-8119-270-Tr-0-questions@freebsd.org-1 Delivered-To: =?utf-8?Q?=C4=B0stanbul_Bili=C5=9Fim_?= MIME-Version: 1.0 Content-Type: text/plain; charset = "utf-8" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: =?utf-8?q?Her_Cebe_G=C3=B6re_Televizyon?= X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 18:28:35 -0000 Size =C3=B6zel b=C3=BClteni g=C3=B6rmek i=C3=A7in a=C5=9Fa=C4=9F=C4=B1daki = linke t=C4=B1klay=C4=B1n=C4=B1z:=20 T=C4=B1klay=C4=B1n=C4=B1z=20 From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 19:27:11 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 610AC106564A for ; Sat, 26 Nov 2011 19:27:11 +0000 (UTC) (envelope-from moritz@wzff.de) Received: from barfooze.de (unknown [IPv6:2a01:4f8:7d:200:0:4e2e:75d4:1]) by mx1.freebsd.org (Postfix) with ESMTP id 055C68FC0C for ; Sat, 26 Nov 2011 19:27:11 +0000 (UTC) Received: from localhost.localdomain ([127.0.0.1] helo=barfooze.de) by barfooze.de with smtp (Exim 4.76) (envelope-from ) id 1RUNtr-0008RY-BB for freebsd-questions@freebsd.org; Sat, 26 Nov 2011 20:27:09 +0100 Date: Sat, 26 Nov 2011 20:26:59 +0100 From: Moritz Wilhelmy To: freebsd-questions@freebsd.org Message-ID: <20111126192659.GS16096@barfooze.de> References: <20111126154422.GR16096@barfooze.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20111126154422.GR16096@barfooze.de> User-Agent: Mutt/1.5.21 (2010-09-15) Subject: Re: Disable automatic "Fallback" IP on 9.0-RC2 when a hostname cannot be resolved X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 19:27:11 -0000 Hi, Nope, it's not my DNS provider. I checked that. On the furnace.wzff.de jail: # cat /etc/resolv.conf # Generated by resolvconf nameserver 213.133.98.98 nameserver 213.133.99.99 nameserver 213.133.100.100 # host foo1 Host foo1 not found: 3(NXDOMAIN) # grep foo1 /etc/hosts # telnet foo1 25 Trying 178.63.197.15... Connected to wzff.de. Escape character is '^]'. 220 wzff.de ESMTP Exim 4.72 Sat, 26 Nov 2011 20:18:45 +0100 QUIT 221 wzff.de closing connection Connection closed by foreign host. Same thing on the mail.wzff.de jail: # telnet foo1 25 Trying 178.63.197.15... Connected to wzff.de. Escape character is '^]'. jabber.barfooze.de: # telnet fu1 25 Trying 78.46.117.212... Connected to fu1.barfooze.de. Escape character is '^]'. 220 barfooze.de ESMTP Exim 4.76 Sat, 26 Nov 2011 20:25:57 +0100 Interestingly, on this jail it connects to a subdomain. I tried telnet and irssi, and both of them do this, so it's probably not an application bug either. Any hints where else I should look? Best regards, Moritz From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 19:33:56 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5E923106566C for ; Sat, 26 Nov 2011 19:33:56 +0000 (UTC) (envelope-from moritz@wzff.de) Received: from barfooze.de (unknown [IPv6:2a01:4f8:7d:200:0:4e2e:75d4:1]) by mx1.freebsd.org (Postfix) with ESMTP id 287828FC18 for ; Sat, 26 Nov 2011 19:33:55 +0000 (UTC) Received: from localhost.localdomain ([127.0.0.1] helo=barfooze.de) by barfooze.de with smtp (Exim 4.76) (envelope-from ) id 1RUO0Y-0001xR-TY; Sat, 26 Nov 2011 20:33:55 +0100 Date: Sat, 26 Nov 2011 20:33:54 +0100 From: Moritz Wilhelmy To: Michael Ross Message-ID: <20111126193354.GT16096@barfooze.de> References: <20111126154422.GR16096@barfooze.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.21 (2010-09-15) Cc: freebsd-questions@freebsd.org Subject: Re: Disable automatic "Fallback" IP on 9.0-RC2 when a hostname cannot be resolved X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 19:33:56 -0000 Hi Michael, On Sat, Nov 26, 2011 at 18:18:00 +0100, Michael Ross wrote: > Add e. g. ``search local'' to /etc/resolv.conf. > The behaviour is explained in man resolv.conf, "search". > > Or disable wildcard entries in your dns server config. Thanks for pointing this out. Explicitely setting search local wasn't required on my previous machines, all of which ran Linux though, which is a different kind of beast.. The 8.2 machine I was talking about doesn't have wildcard domain names set. Best regards, Moritz From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 20:29:22 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0F80C1065676 for ; Sat, 26 Nov 2011 20:29:22 +0000 (UTC) (envelope-from pavel.matousek@iol.cz) Received: from smtp-out2.iol.cz (smtp-out2.iol.cz [194.228.2.87]) by mx1.freebsd.org (Postfix) with ESMTP id 8CAE38FC1A for ; Sat, 26 Nov 2011 20:29:21 +0000 (UTC) Received: from antivir4.iol.cz (antivir4.iplanet.iol.cz [192.168.30.209]) by smtp-out2.iol.cz (Postfix) with ESMTP id 00AA110607 for ; Sat, 26 Nov 2011 20:56:23 +0100 (CET) Received: from localhost (antivir4.iol.cz [127.0.0.1]) by antivir4.iol.cz (Postfix) with ESMTP id E95013A8054 for ; Sat, 26 Nov 2011 20:56:22 +0100 (CET) X-Virus-Scanned: amavisd-new at iol.cz Received: from antivir4.iol.cz ([127.0.0.1]) by localhost (antivir4.iol.cz [127.0.0.1]) (amavisd-new, port 10124) with LMTP id hsUPHuIYg3Iv for ; Sat, 26 Nov 2011 20:56:22 +0100 (CET) Received: from port5.iol.cz (unknown [192.168.30.95]) by antivir4.iol.cz (Postfix) with ESMTP id C8DB53A8053; Sat, 26 Nov 2011 20:56:22 +0100 (CET) X-SBRS: None X-SBRS-none: None X-RECVLIST: MTA-OUT-QUICK X-IronPort-Anti-Spam-Filtered: true X-IronPort-Anti-Spam-Result: Av0EAOhD0U6g2gsB/2dsb2JhbABEqwCBBYFzAQWBCQ8BHCUPSAYBEh69M4dNgxUEmgqMTA Received: from iol.cz ([160.218.11.1]) by port5.iol.cz with ESMTP; 26 Nov 2011 20:56:22 +0100 Received: from [10.4.50.41] (Forwarded-For: 90.177.12.249) by lxipl201.ux.to2cz.cz (mshttpd); Sat, 26 Nov 2011 20:56:22 +0100 From: =?iso-8859-2?Q?=22Pavel_Matou=B9ek=22?= To: freebsd-questions@FreeBSD.org, Message-ID: <7d170fe762174ef.4ed15276@iol.cz> Date: Sat, 26 Nov 2011 20:56:22 +0100 X-Mailer: Oracle Communications Messenger Express 7u4-23.01(7.0.4.23.0) 64bit (built Aug 10 2011) MIME-Version: 1.0 Content-Language: cs X-Accept-Language: cs Priority: normal In-Reply-To: <7e59e8f473fd74a8.4ed14441@iol.cz> References: <3466a2361dd57013.4ed1430d@iol.cz> <367ca7c75e4b148e.4ed1434a@iol.cz> <371e6b3a45664eb.4ed14388@iol.cz> <518269064689766.4ed143c6@iol.cz> <5eced5c559cd518c.4ed14403@iol.cz> <7e59e8f473fd74a8.4ed14441@iol.cz> Content-Type: text/plain; charset=iso-8859-2 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: HDD formatted in FreeBSD/386 on Win XP X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 20:29:22 -0000 Hi=2C please try me help me with following Problem=2E = My TV Panasonic Viera G20 has an external HDD=2C formatted in FreeBSD/38= 6 system ( recognized via my standard Notebook with Win XP and SW Partit= ion Magic 8=2E0=2E = I can see in SW format style and some info about partitions=2C but nothi= ng more is possible=2E = Main Goal is save video files from Panasonic HDD to my Notebook=2E for n= ext work = Problem is clear=2C I have in Win XP no chance to read content from Pana= sonic HDD in other format - FreeBSD=2E = Exist some SW for Win SW for =22reading=22 this FreeBSD formatted HDD =3F= = Many thanks = Regards = Pavel Matousek=2C Czech Rep=2E = = -- = = S p=F8=E1telsk=FDm pozdravem Pavel Matou=B9ek ------------------------------------ Tel =3A +420 602 500 412 Fax =3A +420 549 249 912 E-Mail =3A pavel=2Ematousek=40iol=2Ecz From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 20:55:31 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 988281065676 for ; Sat, 26 Nov 2011 20:55:31 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from mx01.qsc.de (mx01.qsc.de [213.148.129.14]) by mx1.freebsd.org (Postfix) with ESMTP id 597D98FC13 for ; Sat, 26 Nov 2011 20:55:31 +0000 (UTC) Received: from r56.edvax.de (port-92-195-104-16.dynamic.qsc.de [92.195.104.16]) by mx01.qsc.de (Postfix) with ESMTP id CB6433CF03; Sat, 26 Nov 2011 21:55:29 +0100 (CET) Received: from r56.edvax.de (localhost [127.0.0.1]) by r56.edvax.de (8.14.5/8.14.5) with SMTP id pAQKtSlh002393; Sat, 26 Nov 2011 21:55:28 +0100 (CET) (envelope-from freebsd@edvax.de) Date: Sat, 26 Nov 2011 21:55:28 +0100 From: Polytropon To: =?UTF-8?B?IlBhdmVsIE1hdG91xaFlayI=?= Message-Id: <20111126215528.ba9116b9.freebsd@edvax.de> In-Reply-To: <7d170fe762174ef.4ed15276@iol.cz> References: <3466a2361dd57013.4ed1430d@iol.cz> <367ca7c75e4b148e.4ed1434a@iol.cz> <371e6b3a45664eb.4ed14388@iol.cz> <518269064689766.4ed143c6@iol.cz> <5eced5c559cd518c.4ed14403@iol.cz> <7e59e8f473fd74a8.4ed14441@iol.cz> <7d170fe762174ef.4ed15276@iol.cz> Organization: EDVAX X-Mailer: Sylpheed 3.1.1 (GTK+ 2.24.5; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: freebsd-questions@freebsd.org Subject: Re: HDD formatted in FreeBSD/386 on Win XP X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Polytropon List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 20:55:31 -0000 On Sat, 26 Nov 2011 20:56:22 +0100, Pavel MatouÅ¡ek wrote: > Exist some SW for Win SW for "reading" this FreeBSD formatted HDD ? You should ask this question on a "Windows" related list. :-) But during my "data recovery journey", I came across a program that can be used to read UFS formatted disks, even though it is a recovery program in the first place. It's called "R-Studio" and runs on some kind of "Windows". Note that this program is not for free. You can try a demo version with limited capabilities, but you have to buy the full product. In the trial version, you can at least see the full content of the disk and decide if it's worth purchasing the full product. There's also "UFSExplorer", you have to buy this as well. I remember that this has been recommended to read UFS disks that are not defective (like mine was). :-) As far as I know, "Windows" does not understand standard file systems; it can only read its own ones. For everything else, you'll need additional programs or "drivers". I'm not sure if those are for free. Maybe you can try "ufs2tools": http://ufs2tools.sourceforge.net/ Also try some googling, maybe like this: http://www.google.com/search?q=read+ufs+freebsd+windows+xp Sorry for not being more specific, as I'm not a "Windows" person. :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 21:06:39 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6D66C1065675 for ; Sat, 26 Nov 2011 21:06:39 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id 3B7C58FC23 for ; Sat, 26 Nov 2011 21:06:39 +0000 (UTC) Received: by iakl21 with SMTP id l21so9830052iak.13 for ; Sat, 26 Nov 2011 13:06:38 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type :content-transfer-encoding:message-id; bh=F/3sTyQJSJd39sUkijxpGoSr2KNlciV+8B4uWsqHi2w=; b=gE7RYSQpYF70sZVspUiIybH0o1Z2F1A1Zk4xKHbsmG39d/0qwNnG5PbZX1Yt+oU+O+ phaqQe2AWRMlJDrhp//SeL0nahJPX/jqurrxpe+vYhuITyYUL/47ZSzx3dw3NC689gNu uitoVupx+kdhJ1ICmkzjutahTA9lRHuNzuOuo= Received: by 10.50.163.97 with SMTP id yh1mr43709792igb.37.1322341598727; Sat, 26 Nov 2011 13:06:38 -0800 (PST) Received: from luna.wi.rr.com (cpe-184-58-138-79.wi.res.rr.com. [184.58.138.79]) by mx.google.com with ESMTPS id e2sm21257945ibe.0.2011.11.26.13.06.38 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 26 Nov 2011 13:06:38 -0800 (PST) From: ajtiM To: freebsd-questions@freebsd.org Date: Sat, 26 Nov 2011 15:06:28 -0600 User-Agent: KMail/1.13.7 (FreeBSD/9.0-RC2; KDE/4.7.3; i386; ; ) MIME-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <201111261506.28968.lumiwa@gmail.com> Subject: search path X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 21:06:39 -0000 Hi! On my new installed 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 12 18:09:11 UTC 2011 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 and KDE 4.7.3 I installed with "make install" krecipes-kde4 and because I didn't like it I deinstall with "make deinstall" which I did many times before on FreeBSD 8.2 with KDE 4.7.2. Deinstallation looks like works but I got also: /usr/local/kde4/share is not in the search path of XDG_DATA_STORAGE and XDG_DATA_DIRS. I never had this before. Thanks in advance... Mitja -------- http://jpgmag.com/people/lumiwa From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 21:50:46 2011 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 418DA106564A for ; Sat, 26 Nov 2011 21:50:46 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp6.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) by mx1.freebsd.org (Postfix) with ESMTP id A13808FC19 for ; Sat, 26 Nov 2011 21:50:45 +0000 (UTC) Received: from seedling.black-earth.co.uk (seedling.black-earth.co.uk [81.187.76.163]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.14.5/8.14.5) with ESMTP id pAQLoeZP077279 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO) for ; Sat, 26 Nov 2011 21:50:40 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: OpenDKIM Filter v2.4.1 smtp.infracaninophile.co.uk pAQLoeZP077279 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=infracaninophile.co.uk; s=201001-infracaninophile; t=1322344240; bh=9TPkDnlQJzSsLmCtZg2AohFAVXHG0c2n2CpbrvtbTw4=; h=Message-ID:Date:From:MIME-Version:To:Subject:References: In-Reply-To:Content-Type:Cc; b=J4cFho74zEM40i6YenkKeCqqRbPc0aMuejZS1I/ACWBE4xaMMJ5TcuokoYb4QG6mQ WexPVR1BC+CLqPIzJeyHBPLLTHubOYuPXh0VVW3RIfFFLEMdHf3AcvV1mmGp8FxdvG Bgx+p7LablgsHz4HaAucs1l2ZZFXTK5vqyBabH0w= Message-ID: <4ED15F26.6010105@infracaninophile.co.uk> Date: Sat, 26 Nov 2011 21:50:30 +0000 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <20111126154422.GR16096@barfooze.de> <20111126192659.GS16096@barfooze.de> In-Reply-To: <20111126192659.GS16096@barfooze.de> X-Enigmail-Version: 1.3.3 OpenPGP: id=60AE908C Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enigD46E1DAA1871E5BEA4C0EED3" X-Virus-Scanned: clamav-milter 0.97.3 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on lucid-nonsense.infracaninophile.co.uk Subject: Re: Disable automatic "Fallback" IP on 9.0-RC2 when a hostname cannot be resolved X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 21:50:46 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enigD46E1DAA1871E5BEA4C0EED3 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 26/11/2011 19:26, Moritz Wilhelmy wrote: > Nope, it's not my DNS provider. I checked that. # dig '*.wzff.de' IN ANY ; <<>> DiG 9.6.-ESV-R5-P1 <<>> *.wzff.de IN ANY ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 54277 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 3, ADDITIONAL: 0 ;; QUESTION SECTION: ;*.wzff.de. IN ANY ;; ANSWER SECTION: *.wzff.de. 3600 IN CNAME wzff.de. ;; AUTHORITY SECTION: wzff.de. 86399 IN NS ns.inwx.de. wzff.de. 86399 IN NS ns2.inwx.de. wzff.de. 86399 IN NS ns3.inwx.de. ;; Query time: 170 msec ;; SERVER: ::1#53(::1) ;; WHEN: Sat Nov 26 21:49:33 2011 ;; MSG SIZE rcvd: 99 Yes, it is your DNS provider. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matthew@infracaninophile.co.uk Kent, CT11 9PW --------------enigD46E1DAA1871E5BEA4C0EED3 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk7RXzAACgkQ8Mjk52CukIwnTACeKjxdLaPP5wS3ASJqrqkYNDnI NLAAn0riJckdS/IZfRFdvhPTfX9kIJh0 =YZpx -----END PGP SIGNATURE----- --------------enigD46E1DAA1871E5BEA4C0EED3-- From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 21:56:03 2011 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AA5E21065670 for ; Sat, 26 Nov 2011 21:56:03 +0000 (UTC) (envelope-from traveling08@cox.net) Received: from fed1rmfepo102.cox.net (fed1rmfepo102.cox.net [68.230.241.144]) by mx1.freebsd.org (Postfix) with ESMTP id 805798FC08 for ; Sat, 26 Nov 2011 21:56:03 +0000 (UTC) Received: from fed1rmimpo306.cox.net ([68.230.241.174]) by fed1rmfepo102.cox.net (InterMail vM.8.01.04.00 201-2260-137-20101110) with ESMTP id <20111126215603.SLCA3805.fed1rmfepo102.cox.net@fed1rmimpo306.cox.net>; Sat, 26 Nov 2011 16:56:03 -0500 Received: from dell64 ([72.220.91.219]) by fed1rmimpo306.cox.net with bizsmtp id 1xv61i0064jy6EY03xv6Sq; Sat, 26 Nov 2011 16:55:06 -0500 X-CT-Class: Clean X-CT-Score: 0.00 X-CT-RefID: str=0001.0A020206.4ED16072.0127,ss=1,re=0.000,fgs=0 X-CT-Spam: 0 X-Authority-Analysis: v=1.1 cv=dLinpSRpD/siYDweLtUcKy2MkOOT9IlUWnc+SxVPJKw= c=1 sm=1 a=d5xdBJzwzI4A:10 a=G8Uczd0VNMoA:10 a=kj9zAlcOel0A:10 a=olICo1sKaMXbpqbYUd6B5g==:17 a=s1O25tkdAAAA:8 a=GiYty0gg7Rsg_2fCld0A:9 a=qcaonAvTG1WUCDsg35sA:7 a=CjuIK1q_8ugA:10 a=OyOq_G8mXAEA:10 a=olICo1sKaMXbpqbYUd6B5g==:117 X-CM-Score: 0.00 Authentication-Results: cox.net; none Date: Sat, 26 Nov 2011 13:55:57 -0800 From: Robert To: Warren Block Message-ID: <20111126135557.56f4ea06@dell64> In-Reply-To: References: <201111241116.pAOBGH4i098240@fire.js.berklix.net> <20111124113938.2d99eec2@dell64> <20111125095457.477e9501@dell64> X-Mailer: Claws Mail 3.7.10 (GTK+ 2.24.6; amd64-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: "Julian H. Stacey" , questions@freebsd.org Subject: Re: Invalid fdisk partition table found (fwd) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 21:56:03 -0000 On Fri, 25 Nov 2011 13:29:51 -0700 (MST) Warren Block wrote: > On Fri, 25 Nov 2011, Robert wrote: > > > On Thu, 24 Nov 2011 13:45:37 -0700 (MST) > > Warren Block wrote: > > > >> On Thu, 24 Nov 2011, Robert wrote: > >> > >>> [robert@dell64] ~> sudo gpart destroy -F da1 > >>> da1 destroyed > >> And it starts with a default table equal to the size of the drive. > > > > Is it supposed to still show sysid 165 ? > > > > I was under the impression that dd if=/dev/zero would clean out > > everything including sector 1. > > The partition table was cleared, that's why it said "invalid fdisk > partition table found". Rather than starting with an invalid table, > it created a valid default table in memory. > > >> Do both cards report the same size? > > > > Yes..sort of 28, 29 MB Some difference today. Not sure at what point this happened but one of my CF cards now reads: [robert@dell64] ~> fdisk /dev/da1 ******* Working on device /dev/da1 ******* parameters extracted from in-core disklabel are: cylinders=2057 heads=255 sectors/track=63 (16065 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=2057 heads=255 sectors/track=63 (16065 blks/cyl) fdisk: invalid fdisk partition table found Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 33045642 (16135 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 8/ head 254/ sector 63 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: Now showing 16GB but still not right. [robert@dell64] ~> sudo gpart destroy -F da1 Password: da1 destroyed [robert@dell64] ~> gpart create -s MBR da1 da1 created [robert@dell64] ~> gpart add -t freebsd -s 15G da1 da1s1 added [robert@dell64] ~> gpart set -a active -i 1 da1 active set on da1s1 [robert@dell64] ~> gpart bootcode -b /boot/boot0 da1 bootcode written to da1 [robert@dell64] ~> ls -l /dev/da1* crw-rw---- 1 root operator 0, 145 Nov 26 08:48 /dev/da1 crw-rw---- 1 root operator 0, 129 Nov 26 13:48 /dev/da1s1 [robert@dell64] ~> sudo mount /dev/da1s1 /mnt mount: /dev/da1s1 : Invalid argument I also did this in single user with the same results. Ideally, I would like to change these cards to FAT32 but I cannot get there with fdisk and am not sure how to get there with gpart or if I can. > > If they weren't the same, I was going to suggest maybe they've been > heavily used and worn out. But I don't know if capacity shrinks as > blocks go bad and spares are used up, or if they just quit working. > And I'd expect them to be very different unless they had the exact > same usage, like in a mirror. I haven't had any luck with the second CF card as it still show 29MB. I will try some more later today or tomorrow. robert From owner-freebsd-questions@FreeBSD.ORG Sat Nov 26 23:13:13 2011 Return-Path: Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BD580106564A for ; Sat, 26 Nov 2011 23:13:13 +0000 (UTC) (envelope-from kline@thought.org) Received: from thought.org (plato.thought.org [209.180.213.209]) by mx1.freebsd.org (Postfix) with ESMTP id 7B2468FC0A for ; Sat, 26 Nov 2011 23:13:13 +0000 (UTC) Received: by thought.org (Postfix, from userid 1001) id 92314E80A82; Sat, 26 Nov 2011 15:13:12 -0800 (PST) Date: Sat, 26 Nov 2011 15:13:12 -0800 From: Gary Kline To: FreeBSD Mailing List , Hackers Mailing List Message-ID: <20111126231309.GA9562@thought.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Organization: Thought Unlimited. Public service Unix since 1986. Of_Interest: With 25 years of service to the Unix community. User-Agent: Mutt/1.5.21 (2010-09-15) Cc: Subject: gtk help, anybody? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Nov 2011 23:13:13 -0000 hi guys, can any one on questions or hackers give me a clue how to straighten out a 50-line gtk program? or suggest a good on-line tutorial? because this is seruiously OT, please send your home email. thanks much [either way], gary -- Gary Kline kline@thought.org http://www.thought.org Public Service Unix Journey Toward the Dawn, E-Book: http://www.thought.org The 8.57a release of Jottings: http://jottings.thought.org Twenty-five years of service to the Unix community.