Date: Mon, 24 Feb 2020 11:34:47 -0800 From: Pete Wright <pete@nomadlogic.org> To: Mario Olofo <mario.olofo@gmail.com> Cc: John Kennedy <warlock@phouka.net>, freebsd-stable@freebsd.org Subject: Re: Running FreeBSD on M.2 SSD Message-ID: <9581e639-66ba-861d-ff41-8c831cc86726@nomadlogic.org> In-Reply-To: <CAP4Gn9Cy1w=ftw5QrdCFhWOQ_TaOOK=Wj2NGDC6R81fGPPAB6w@mail.gmail.com> References: <CAP4Gn9DbdzSMbj=xn3E4TMRWzs-WY%2Bun2Rzd9Dt3PUeDL%2BYtpA@mail.gmail.com> <20200224144602.GA64065@phouka1.phouka.net> <CAP4Gn9DYui-x_wsDN3TUMd7cDPB%2BTSfRX3TL5DAa=8a1=eRGxQ@mail.gmail.com> <437a5eae-03c8-737d-48bf-39e2e9163d6d@nomadlogic.org> <CAP4Gn9Cy1w=ftw5QrdCFhWOQ_TaOOK=Wj2NGDC6R81fGPPAB6w@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2020-02-24 11:13, Mario Olofo wrote: > Hi Pete, > > The nvmecontrol devlist don't found any devices. > pciconf -lv nvme0 didn't found anything either. > > The camcontrol devlist output was as follows: > > root@~ # camcontrol devlist > <ST10000LX015-1U7172 SDM3> at scbus0 target 0 lun 0 (ada0,pass0) > <WDC WDS480G2G0B-00EPW0 UK450000> at scbus1 target 0 lun 0 (ada1,pass1) > <SanDisk Extreme 0001> at scbus2 target 0 lun 0 (pass2,da0) > > The dmesg | grep ada1 shows the following: > > Feb 24 18:54:31 kernel: ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > Feb 24 18:54:31 kernel: ada1: <WDC WDS480G2G0B-00EPW0 UK450000> ACS-2 ATA > SATA 3.x device > Feb 24 18:54:31 kernel: ada1: Serial Number 183541800480 > Feb 24 18:54:31 kernel: ada1: 600.00MB/s transfers (SATA 3.x, UDMA6, PIO > 512bytes) > Feb 24 18:54:31 kernel: ada1: Command Queueing enabled > Feb 24 18:54:31 kernel: ada1:457872MB (937721856 512 byte sectors) > > Mario > Thanks Mario, When you run into issues or filesystem corruption do you see anything in the dmesg buffer or in /var/log/messages? -pete -- Pete Wright pete@nomadlogic.org @nomadlogicLA
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9581e639-66ba-861d-ff41-8c831cc86726>