Date: Wed, 17 Sep 2003 02:49:54 -0500 From: "Conrad J. Sabatier" <conrads@cox.net> To: freebsd-current@FreeBSD.org Subject: Still problems with ATAPI Message-ID: <200309170749.h8H7nx5B000983@ip68-14-60-78.no.no.cox.net>
next in thread | raw e-mail | index | archive | help
This is a multipart MIME message.
--==_Exmh_3775100130
Content-Type: text/plain; charset=us-ascii
(dmesg.boot attached)
ATAng will no longer recognize the DVD-ROM device on ata1-master. This is
without atapicam. The CD-RW drive at ata1-slave is OK, and is being assigned
to acd0 now.
Incidentally, when did the hw.ata.* sysctls change?
--==_Exmh_3775100130
Content-Type: text/plain ; name="dmesg.boot"; charset=us-ascii
Content-Description: dmesg.boot
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #1: Wed Sep 17 01:15:08 CDT 2003
conrads@ip68-14-60-78.no.no.cox.net:/usr/obj/usr/src/sys/MYKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xa0459000.
Preloaded elf module "/boot/modules/ipfw.ko" at 0xa0459200.
Preloaded elf module "/boot/modules/miibus.ko" at 0xa04592ac.
Preloaded elf module "/boot/modules/if_fxp.ko" at 0xa0459358.
Preloaded elf module "/boot/modules/snd_pcm.ko" at 0xa0459404.
Preloaded elf module "/boot/modules/snd_es137x.ko" at 0xa04594b4.
Preloaded elf module "/boot/modules/random.ko" at 0xa0459564.
Preloaded elf module "/boot/modules/acpi.ko" at 0xa0459610.
Preloaded elf module "/boot/modules/aio.ko" at 0xa04596bc.
Preloaded elf module "/boot/modules/lpt.ko" at 0xa0459768.
Preloaded elf module "/boot/modules/ppi.ko" at 0xa0459814.
Calibrating clock(s) ... i8254 clock: 1193271 Hz
Timecounter "i8254" frequency 1193271 Hz quality 0
Calibrating TSC clock ... TSC clock: 998142849 Hz
CPU: AMD Athlon(tm) Processor (998.14-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x622 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000482000 - 0x000000001f6c9fff, 522485760 bytes (127560 pages)
avail memory = 516546560 (492 MB)
bios32: Found BIOS32 Service Directory header at 0xa00f7a70
bios32: Entry = 0xfd6d0 (a00fd6d0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd6d0+0x11e
pnpbios: Found PnP BIOS data at 0xa00f7a40
pnpbios: Entry = f0000:9a6a Rev = 1.0
pnpbios: OEM ID 46b1110e
Other BIOS signatures found:
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80006004
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=70061022)
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xa00fdf20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 3 A 0x04 3 4 5 6 7 10 11 12 14 15
slot 1 0 3 B 0x01 3 4 5 6 7 10 11 12 14 15
slot 1 0 3 C 0x02 3 4 5 6 7 10 11 12 14 15
slot 1 0 3 D 0x03 3 4 5 6 7 10 11 12 14 15
slot 2 0 4 A 0x01 3 4 5 6 7 10 11 12 14 15
slot 2 0 4 B 0x02 3 4 5 6 7 10 11 12 14 15
slot 2 0 4 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 2 0 4 D 0x04 3 4 5 6 7 10 11 12 14 15
slot 3 0 9 A 0x02 3 4 5 6 7 10 11 12 14 15
slot 3 0 9 B 0x03 3 4 5 6 7 10 11 12 14 15
slot 3 0 9 C 0x04 3 4 5 6 7 10 11 12 14 15
slot 3 0 9 D 0x01 3 4 5 6 7 10 11 12 14 15
slot 4 0 6 A 0x03 3 4 5 6 7 10 11 12 14 15
slot 4 0 6 B 0x04 3 4 5 6 7 10 11 12 14 15
slot 4 0 6 C 0x01 3 4 5 6 7 10 11 12 14 15
slot 4 0 6 D 0x02 3 4 5 6 7 10 11 12 14 15
slot 5 0 15 A 0x04 3 4 5 6 7 10 11 12 14 15
slot 5 0 15 B 0x01 3 4 5 6 7 10 11 12 14 15
slot 5 0 15 C 0x02 3 4 5 6 7 10 11 12 14 15
slot 5 0 15 D 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 12 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 7 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 7 D 0x04 3 4 5 6 7 10 11 12 14 15
embedded 0 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x04 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x03 3 4 5 6 7 10 11 12 14 15
embedded 1 5 A 0x02 3 4 5 6 7 10 11 12 14 15
embedded 1 5 B 0x03 3 4 5 6 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 0, max = 16777214, width = 16777214
ACPI timer looks BAD min = 1, max = 16777215, width = 16777214
ACPI timer looks BAD min = 0, max = 16777214, width = 16777214
ACPI timer looks BAD min = 1, max = 16777210, width = 16777209
ACPI timer looks BAD min = 1, max = 16777214, width = 16777213
ACPI timer looks BAD min = 0, max = 3, width = 3
ACPI timer looks BAD min = 1, max = 16777214, width = 16777213
ACPI timer looks BAD min = 1, max = 16777214, width = 16777213
ACPI timer looks BAD min = 0, max = 16777214, width = 16777214
ACPI timer looks BAD min = 1, max = 16777215, width = 16777214
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x8000-0x807f,0x4000-0x400f,0xcf8-0xcff,0xa9,0xa8,0x92 on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.3.0
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.3.1
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.3.2
\\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.3.3
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.4.0
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.4.1
\\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.4.2
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.4.3
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.9.0
\\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.9.1
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.9.2
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.9.3
\\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.6.0
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.6.1
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.6.2
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.6.3
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.15.0
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.15.1
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.15.2
\\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.15.3
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.12.0
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.7.0
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.7.3
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.0.0
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.0.1
\\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.0.2
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.0.3
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.1.0
\\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.1.1
---- before setting priority for links ------------
\\_SB_.PCI0.PIB_.LNKC:
interrupts: 5 7 10 11 12
penalty: 1570 1770 1470 1470 1770
references: 7
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.PIB_.LNKC:
interrupts: 5 7 10 11 12
penalty: 1570 1770 1470 1470 1770
references: 7
priority: 11270
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.3.0
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.3.1
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.3.2
\\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.3.3
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.4.0
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.4.1
\\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.4.2
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.4.3
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.9.0
\\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.9.1
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.9.2
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.9.3
\\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.6.0
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.6.1
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.6.2
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.6.3
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.15.0
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.15.1
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.15.2
\\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.15.3
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.12.0
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.7.0
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.7.3
\\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.0.0
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.0.1
\\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.0.2
\\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.0.3
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.1.0
\\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.1.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 27, enabled
map[14]: type 3, range 32, base e0006000, size 12, enabled
map[18]: type 4, range 32, base 00001410, size 2, port disabled
found-> vendor=0x1022, dev=0x7006, revid=0x25
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7007, revid=0x01
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00001000, size 6, enabled
pcib0: matched entry for 0.3.INTA (source \\_SB_.PCI0.PIB_.LNKD)
pcib0: slot 3 INTA is routed to irq 11
found-> vendor=0x1274, dev=0x1371, revid=0x08
bus=0, slot=3, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D2 D3 current D1
map[10]: type 1, range 32, base e0004000, size 12, enabled
map[14]: type 4, range 32, base 00001040, size 6, enabled
map[18]: type 1, range 32, base e0100000, size 20, enabled
pcib0: matched entry for 0.4.INTA (source \\_SB_.PCI0.PIB_.LNKA)
pcib0: slot 4 INTA is routed to irq 5
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x0686, revid=0x14
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001400, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 000010c0, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.PIB_.LNKD)
pcib0: slot 7 INTD is routed to irq 11
found-> vendor=0x1106, dev=0x3038, revid=0x06
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 000010e0, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.PIB_.LNKD)
pcib0: slot 7 INTD is routed to irq 11
found-> vendor=0x1106, dev=0x3038, revid=0x06
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
found-> vendor=0x1106, dev=0x3057, revid=0x10
bus=0, slot=7, func=4
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00001080, size 6, enabled
pcib0: matched entry for 0.9.INTA (source \\_SB_.PCI0.PIB_.LNKB)
pcib0: slot 9 INTA is routed to irq 10
found-> vendor=0x134d, dev=0x7897, revid=0x02
bus=0, slot=9, func=0
class=07-03-01, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base e0005000, size 11, enabled
map[14]: type 1, range 32, base e0000000, size 14, enabled
pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.PIB_.LNKA)
pcib0: slot 12 INTA is routed to irq 5
found-> vendor=0x104c, dev=0x8019, revid=0x00
bus=0, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=5
powerspec 1 supports D0 D2 D3 current D0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe0200000-0xe02fffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
---- initial configuration ------------------------
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 1.5.0
\\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 1.5.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 1.5.0
\\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 1.5.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base e0200000, size 19, enabled
map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib1: matched entry for 1.5.INTA (source \\_SB_.PCI0.PIB_.LNKB)
pcib1: slot 5 INTA is routed to irq 10
found-> vendor=0x5333, dev=0x8a22, revid=0x04
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 5.0 (no driver attached)
pcm0: <AudioPCI ES1373-8> port 0x1000-0x103f irq 11 at device 3.0 on pci0
pcm0: <Cirrus Logic CS4297A AC97 Codec (id = 0x43525913)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement
pcm0: Primary codec extended features AMAP
pcm0: sndbuf_setmap 6d0000, 1000; 0xa2a06000 -> 6d0000
pcm0: sndbuf_setmap 74e000, 1000; 0xa2a04000 -> 74e000
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1040-0x107f mem 0xe0100000-0xe01fffff,0xe0004000-0xe0004fff irq 5 at device 4.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:90:27:65:67:c9
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x1400-0x140f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0xd0 err=0x04 lsb=0x00 msb=0x00
ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-master: stat=0xd0 err=0x04 lsb=0x00 msb=0x00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <serial bus, USB> at device 7.3 (no driver attached)
isab1: <PCI-ISA bridge> at device 7.4 on pci0
isa: isa0 already exists; skipping it
device_probe_and_attach: isab1 attach returned 6
pci0: <simple comms> at device 9.0 (no driver attached)
pci0: <serial bus, FireWire> at device 12.0 (no driver attached)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <EPSON Stylus COLOR 600> PRINTER ESCPL2,BDC
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
unknown: not probed (disabled)
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0
sc0: <System console> on isa0
sc0: VGA <12 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xa00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 998142849 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
lo0: bpf attached
Linux ELF exec handler installed
ata1: spurious interrupt - status=0x00 error=0x01
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ad0: setting UDMA66 on VIA 82C686A chip
GEOM: create disk ad0 dp=0xa2a1a970
ad0: <Maxtor 94091U8/FA520S60> ATA-5 disk at ata0-master
ad0: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 40015954944 end 40015987199
GEOM: Configure ad0a, start 0 length 134217728 end 134217727
GEOM: Configure ad0b, start 134217728 length 1057521664 end 1191739391
GEOM: Configure ad0c, start 0 length 40020664320 end 40020664319
GEOM: Configure ad0e, start 1191739392 length 268435456 end 1460174847
GEOM: Configure ad0f, start 1460174848 length 268435456 end 1728610303
GEOM: Configure ad0g, start 1728610304 length 38292054016 end 40020664319
ad1: setting UDMA66 on VIA 82C686A chip
GEOM: create disk ad1 dp=0xa29f0b70
ad1: <WDC WD800BB-32BSA0/12.08C12> ATA-5 disk at ata0-slave
ad1: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA66
GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s1b, start 4966055936 length 1073741824 end 6039797759
GEOM: Configure ad0s1c, start 0 length 40015954944 end 40015954943
GEOM: Configure ad0s1e, start 134217728 length 536870912 end 671088639
Gata1: spurious interrupt - status=0x50 error=0x00
ata1-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
EOM: Configure ad0s1f, start 671088640 length 4294967296 end 4966055935
GEOM: Configure ad0s1g, start 6039797760 length 33976157184 end 40015954943
ata1-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pinata1: spurious interrupt - status=0x58 error=0x00
acd0: setting PIO4 on VIA 82C686A chip
acd0: <R/RW 4x4x24/C12a> CDRW drive at ata1 as slave
acd0: read 5515KB/s (5515KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write
acd0: Audio: play, 2 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: new disk ad1
[0] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/80/63 s:0 l:156301488
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 0 length 80026361856 end 80026361855
GEOM: Configure ad1c, start 0 length 80026361856 end 80026361855
GEOM: Configure ad1e, start 0 length 80026361856 end 80026361855
GEOM: Configure ad1s1c, start 0 length 80026361856 end 80026361855
GEOM: Configure ad1s1e, start 0 length 80026361856 end 80026361855
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
GEOM: Configure ad1c, start 0 length 80026361856 end 80026361855
GEOM: Configure ad1e, start 0 length 80026361856 end 80026361855
fxp0: Microcode loaded, int_delay: 2000 usec bundle_max: 65535
fxp0: Microcode loaded, int_delay: 2000 usec bundle_max: 65535
fxp0: Microcode loaded, int_delay: 2000 usec bundle_max: 65535
--==_Exmh_3775100130
Content-Type: text/plain; charset=us-ascii
Conrad Sabatier <conrads@cox.net> - "In Unix veritas"
--==_Exmh_3775100130--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200309170749.h8H7nx5B000983>