Date: Sat, 17 Sep 2011 09:37:28 +0200 From: Berislav Purgar <bpurgar@gmail.com> To: Maciej Milewski <milu@dat.pl> Cc: freebsd-mips@freebsd.org Subject: Re: ubnt routerstation and lan ports ?? Message-ID: <CAAUsrB6uk4SWt7rEx-h%2Bo%2Bv%2B5xeg7VYLAwkeUKgjL27ukUsiYA@mail.gmail.com> In-Reply-To: <201109170831.58398.milu@dat.pl> References: <CAAUsrB4Mh815MhLwUhGFZ5fNrCLSQDdRdS-PW6p6Hu-051odtg@mail.gmail.com> <CAJ-Vmo=DE6gttcjDP1fFGdHmuwsyZCTutfOxeEd37MtBBVVTOQ@mail.gmail.com> <CAAUsrB513DGsHYP=bQDNPsp16sc6-1%2B1y8REW9Jm1CffQBUVYw@mail.gmail.com> <201109170831.58398.milu@dat.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
2011/9/17 Maciej Milewski <milu@dat.pl>
> Hi,
>
> On pi=B1tek, 16 wrze=B6nia 2011 23:31:05 Berislav Purgar wrote:
> > i have tried hint.arge.1.phymask=3D0x70000 / 0x30000 / 70000 and nothi=
ng
> of
> > that can make it to work .. :(
> > tried openwrt to check ports and everything is OK.
> >
> > Beri
> I have this settings in my hints file and arge1 works:
>
> hint.arge.1.at=3D"nexus0"
> hint.arge.1.maddr=3D0x1a000000
> hint.arge.1.msize=3D0x1000
> hint.arge.1.irq=3D3
> # PHY1, PHY2, PHY3
> hint.arge.1.phymask=3D0x0e
> # should be 100 for RS
> hint.arge.1.media=3D100
> hint.arge.1.fduplex=3D1
>
> Kind regards,
> Maciek
>
Hi
tried 0x0e (but i think that 0x0e is for RSPRO) and same thing ..
The only thing I noticed is that arge1 is always active regardless of the
cable was plugged or not.
arge0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=3D80000<LINKSTATE>
ether
00:15:6d:c4:20:f6
inet 192.168.1.1 netmask 0xffffff00 broadcast
192.168.1.255
media: Ethernet autoselect (100baseTX
<full-duplex>)
status:
active
arge1: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether
00:15:6d:c4:20:f7
media: Ethernet 100baseTX
<full-duplex>
status: active
Beri
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAUsrB6uk4SWt7rEx-h%2Bo%2Bv%2B5xeg7VYLAwkeUKgjL27ukUsiYA>