Date: Fri, 18 Feb 2005 12:44:23 +0200 From: Danny Braniss <danny@cs.huji.ac.il> To: scsi@freebsd.org Subject: iSCSI first steps! Message-ID: <E1D25cV-0005qN-Rl@cs1.cs.huji.ac.il>
next in thread | raw e-mail | index | archive | help
shuttle-2# camcontrol devlist
<HL-DT-ST CD-ROM GCR-8523B 1.00> at scbus2 target 0 lun 0 (cd0,pass0)
<Intransa IP5000 1> at scbus3 target 0 lun 0 (pass1,da0)
shuttle-2# ls /dev/da*
/dev/da0
shuttle-2# fdisk /dev/da0
******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=8354 heads=255 sectors/track=63 (16065 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=8354 heads=255 sectors/track=63 (16065 blks/cyl)
fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 134206947 (65530 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 161/ head 254/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
shuttle-2#
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1D25cV-0005qN-Rl>