Date: Mon, 17 Sep 2001 02:03:21 +0900 (JST) From: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org> To: yokota@zodiac.mech.utsunomiya-u.ac.jp Cc: current@freebsd.org, acpi-jp@jp.freebsd.org Subject: Re: ThinkPad, ACPI, and PS/2 mouse Message-ID: <20010917.020321.74756726.iwasaki@jp.FreeBSD.org> In-Reply-To: <20010915.234817.92590934.iwasaki@jp.FreeBSD.org> References: <200109110336.MAA13723@zodiac.mech.utsunomiya-u.ac.jp> <20010915.234817.92590934.iwasaki@jp.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
----Next_Part(Mon_Sep_17_02:03:21_2001_142)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi, I've just noticed strange behavior of psm probing (w/ and w/o acpi).
> > It now appears that some IBM ThinkPad models assign a distinct PnP ID
> > to the PS/2 mouse port.
> >
> > If you have ThinkPad and its pointing device is not recognized when
> > ACPI is loaded in the latest -current system, please do the following
> >
> > 1. Disable ACPI and boot
> > unset acpi_load
> > boot -v
> > 2. Send the entire dmesg output to me. Don't forget to tell me
> > the model name of your ThinkPad too.
> >
> > ThinkPad models currently known to have this behavior:
> >
> > model PnP ID for the PS/2 mouse port
> > ----------------------------------------------------
> > ThinkPad 570E IBM3780
>
> I also have a ThinkPad i1620 (PS/2 mouse PnP ID = 0x80374d24) here and
> now that the mouse is recognized correctly with ACPI module by your
> last commit.
This is not a ThinkPad, but FIVA 206VL (PS/2 mouse PnP ID = 0x130fd041;
normal one), the psm is no longer recognized if USB is not compiled (or
USB module is not loaded at loader).
Here is difference between dmesgs of kernel w/o and w/ usb module.
--- dmesg-nousb Mon Sep 17 01:24:17 2001
+++ dmesg-usb Mon Sep 17 01:26:47 2001
@@ -3,7 +3,7 @@
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #52: Mon Sep 17 01:16:21 JST 2001
root@fivavl:/usr/obj/usr/CURRENT/src/sys/FIVA
-Calibrating clock(s) ... TSC clock: 597277464 Hz, i8254 clock: 1193158 Hz
+Calibrating clock(s) ... TSC clock: 597277748 Hz, i8254 clock: 1193162 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
@@ -16,16 +16,17 @@
real memory = 251592704 (245696K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009afff, 630784 bytes (154 pages)
-0x0049f000 - 0x0efe7fff, 246714368 bytes (60233 pages)
-avail memory = 240271360 (234640K bytes)
+0x004be000 - 0x0efe7fff, 246587392 bytes (60202 pages)
+avail memory = 240144384 (234516K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f82a0
bios32: Entry = 0xfd770 (c00fd770) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd770+0x11e
pnpbios: Found PnP BIOS data at 0xc00f82f0
pnpbios: Entry = f0000:a965 Rev = 1.0
Other BIOS signatures found:
-Preloaded elf kernel "/boot/kernel/kernel" at 0xc0478000.
-Preloaded elf module "/boot/kernel/logo_saver.ko" at 0xc04780b4.
+Preloaded elf kernel "/boot/kernel/kernel" at 0xc0497000.
+Preloaded elf module "/boot/kernel/logo_saver.ko" at 0xc04970b4.
+Preloaded elf module "/boot/kernel/usb.ko" at 0xc0497164.
null: <null device, zero device>
mem: <memory & I/O>
random: <entropy source>
@@ -117,11 +118,11 @@
pcm0: ac97 codec id 0x41445348 (Analog Devices AD1881A)
pcm0: ac97 codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: ac97 primary codec extended features variable rate PCM
-pcm: setmap 50e000, 1000; 0xc15fa000 -> 50e000
-pcm: setmap 4f1000, 1000; 0xc15fd000 -> 4f1000
-pcm: setmap 4f3000, 1000; 0xc15ff000 -> 4f3000
-pcm: setmap 4d5000, 1000; 0xc1601000 -> 4d5000
-pcm: setmap 4d7000, 1000; 0xc1603000 -> 4d7000
+pcm: setmap 514000, 1000; 0xc1600000 -> 514000
+pcm: setmap 4f7000, 1000; 0xc1603000 -> 4f7000
+pcm: setmap 4f9000, 1000; 0xc1605000 -> 4f9000
+pcm: setmap 51b000, 1000; 0xc1607000 -> 51b000
+pcm: setmap 51d000, 1000; 0xc1609000 -> 51d000
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at device 9.0 (no driver attached)
@@ -285,7 +286,13 @@
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
-pci0: <serial bus, USB> at device 20.0 (no driver attached)
+ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0000-0xd0fff irq 11 at device 20.0 on pci0
+usb0: OHCI version 1.0, legacy support
+usb0: SMM does not respond, resetting
+usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
+usb0: USB revision 1.0
+uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
+uhub0: 2 ports with 2 removable, self powered
ex_isa_identify()
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
@@ -370,7 +377,10 @@
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd1: unable to allocate IRQ
psm0: current command byte:0047
-psm0: the aux port is not functioning (-1).
+psm0: <PS/2 Mouse> irq 12 on atkbdc0
+psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
+psm0: config:00000000, flags:00000000, packet size:3
+psm0: syncmask:c0, syncbits:00
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
@@ -430,10 +440,8 @@
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c02> can't assign resources
unknown: <PNP0c02> at iomem 0xd8000-0xdbfff on isa0
-psmcpnp0: <PS/2 mouse port> at irq 12 on isa0
-atkbd1: unable to allocate IRQ
-psm0: current command byte:0047
-psm0: the aux port is not functioning (-1).
+unknown: <PNP0f13> can't assign resources
+unknown: <PNP0f13> at irq 12 on isa0
fdc1: cannot reserve I/O port range (1 ports)
unknown: <PC standard floppy disk controller> failed to probe on isa0
BIOS Geometries:
@@ -441,9 +449,9 @@
0 accounted for
Device configuration finished.
splash: image decoder found: logo_saver
+bpf: ppp0 attached
bpf: faith0 attached
bpf: lo0 attached
-bpf: ppp0 attached
ad0: success setting UDMA4 on Acer chip
Creating DISK ad0
ad0: <IC25N030ATDA04-0/DA4OA70A> ATA-5 disk at ata0-master
I tried to load acpi module too, but it seems acpi doesn't affect psm
probing on this machine.
In summary;
with USB without USB
---------------+---------------+-------------
with ACPI OK NG
without ACPI OK NG
I enclosed dmesg -v output of kernel w/o usb and acpi.
Thanks
----Next_Part(Mon_Sep_17_02:03:21_2001_142)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Description: dmesg-nousb
Content-Disposition: inline; filename=dmesg-nousb
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #52: Mon Sep 17 01:16:21 JST 2001
root@fivavl:/usr/obj/usr/CURRENT/src/sys/FIVA
Calibrating clock(s) ... TSC clock: 597277464 Hz, i8254 clock: 1193158 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Transmeta(tm) Crusoe(tm) Processor TM5600 (597.30-MHz 586-class CPU)
Origin = "GenuineTMx86" Id = 0x543
Processor revision 1.3.1.2
Code Morphing Software revision 4.1.7-7-154
20010606 19:11 official release 18.0.1-4.1.7#3
LongRun mode: 1 <600MHz 1600mV 100%>
real memory = 251592704 (245696K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009afff, 630784 bytes (154 pages)
0x0049f000 - 0x0efe7fff, 246714368 bytes (60233 pages)
avail memory = 240271360 (234640K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f82a0
bios32: Entry = 0xfd770 (c00fd770) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd770+0x11e
pnpbios: Found PnP BIOS data at 0xc00f82f0
pnpbios: Entry = f0000:a965 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0478000.
Preloaded elf module "/boot/kernel/logo_saver.ko" at 0xc04780b4.
null: <null device, zero device>
mem: <memory & I/O>
random: <entropy source>
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80007804
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03951279)
Using $PIR table, 10 entries at 0xc00fdf20
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 1, range 32, base fc100000, size 20, enabled
found-> vendor=0x1279, dev=0x0395, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
found-> vendor=0x1279, dev=0x0396, revid=0x00
bus=0, slot=0, func=1
class=05-00-00, hdrtype=0x00, mfdev=1
found-> vendor=0x1279, dev=0x0397, revid=0x00
bus=0, slot=0, func=2
class=05-00-00, hdrtype=0x00, mfdev=1
map[10]: type 4, range 32, base 00001000, size 8, enabled
map[14]: type 1, range 32, base fc004000, size 12, enabled
found-> vendor=0x10b9, dev=0x5451, revid=0x01
bus=0, slot=4, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x10b9, dev=0x1533, revid=0x00
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
found-> vendor=0x126f, dev=0x0712, revid=0xa0
bus=0, slot=9, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac51, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=5
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac51, revid=0x00
bus=0, slot=10, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=4
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fc006000, size 11, enabled
map[14]: type 1, range 32, base fc000000, size 14, enabled
found-> vendor=0x104c, dev=0x8020, revid=0x00
bus=0, slot=11, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 1, range 32, base fc006800, size 8, enabled
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 000001f0, size 4, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[1c]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 00001800, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc3
bus=0, slot=15, func=0
class=01-01-a4, hdrtype=0x00, mfdev=0
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 1, range 32, base 000d0000, size 12, enabled
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=20, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci0: <PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xfc004000-0xfc004fff irq 10 at device 4.0 on pci0
pcm0: ac97 codec id 0x41445348 (Analog Devices AD1881A)
pcm0: ac97 codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: ac97 primary codec extended features variable rate PCM
pcm: setmap 50e000, 1000; 0xc15fa000 -> 50e000
pcm: setmap 4f1000, 1000; 0xc15fd000 -> 4f1000
pcm: setmap 4f3000, 1000; 0xc15ff000 -> 4f3000
pcm: setmap 4d5000, 1000; 0xc1601000 -> 4d5000
pcm: setmap 4d7000, 1000; 0xc1603000 -> 4d7000
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at device 9.0 (no driver attached)
pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 5 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: Polling mode
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic0: PCI Configuration space:
0x00: 0xac51104c
0x04: 0x02100007
0x08: 0x06070000
0x0c: 0x00824008
0x10: 0x44000000
0x14: 0x020000a0
0x18: 0x00000000
0x1c: 0x00000000
0x20: 0x00000000
0x24: 0x00000000
0x28: 0x00000000
0x2c: 0x00000000
0x30: 0x00000000
0x34: 0x00000000
0x38: 0x00000000
0x3c: 0x07e00105
0x40: 0x00000000
0x44: 0x00000001
0x48: 0x00000000
0x4c: 0x00000000
0x50: 0x00000000
0x54: 0x00000000
0x58: 0x00000000
0x5c: 0x00000000
0x60: 0x00000000
0x64: 0x00000000
0x68: 0x00000000
0x6c: 0x00000000
0x70: 0x00000000
0x74: 0x00000000
0x78: 0x00000000
0x7c: 0x00000000
0x80: 0x48449061
0x84: 0x00000000
0x88: 0x00000000
0x8c: 0x012c1222
0x90: 0x6066a2c0
0x94: 0x00000000
0x98: 0x00000000
0x9c: 0x00000000
0xa0: 0xfe110001
0xa4: 0x00c00000
0xa8: 0x00000000
0xac: 0x0000001f
0xb0: 0x09000000
0xb4: 0x00000000
0xb8: 0x00000000
0xbc: 0x00000000
0xc0: 0x00000000
0xc4: 0x00000000
0xc8: 0x00000000
0xcc: 0x00000000
0xd0: 0x00000000
0xd4: 0x00000000
0xd8: 0x00000000
0xdc: 0x00000000
0xe0: 0x00000000
0xe4: 0x00000000
0xe8: 0x00000000
0xec: 0x00000000
0xf0: 0x00000000
0xf4: 0x00000000
0xf8: 0x00000000
0xfc: 0x00000000
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1420 PCI-CardBus Bridge> irq 4 at device 10.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pcic1: Polling mode
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic1: PCI Configuration space:
0x00: 0xac51104c
0x04: 0x02100007
0x08: 0x06070000
0x0c: 0x00824008
0x10: 0x44001000
0x14: 0x020000a0
0x18: 0x00000000
0x1c: 0x00000000
0x20: 0x00000000
0x24: 0x00000000
0x28: 0x00000000
0x2c: 0x00000000
0x30: 0x00000000
0x34: 0x00000000
0x38: 0x00000000
0x3c: 0x07e00204
0x40: 0x00000000
0x44: 0x00000001
0x48: 0x00000000
0x4c: 0x00000000
0x50: 0x00000000
0x54: 0x00000000
0x58: 0x00000000
0x5c: 0x00000000
0x60: 0x00000000
0x64: 0x00000000
0x68: 0x00000000
0x6c: 0x00000000
0x70: 0x00000000
0x74: 0x00000000
0x78: 0x00000000
0x7c: 0x00000000
0x80: 0x48449061
0x84: 0x00000000
0x88: 0x00000000
0x8c: 0x012c1222
0x90: 0x6066a2c0
0x94: 0x00000000
0x98: 0x00000000
0x9c: 0x00000000
0xa0: 0xfe110001
0xa4: 0x00c00000
0xa8: 0x00000800
0xac: 0x0000001f
0xb0: 0x09000000
0xb4: 0x00000000
0xb8: 0x00000000
0xbc: 0x00000000
0xc0: 0x00000000
0xc4: 0x00000000
0xc8: 0x00000000
0xcc: 0x00000000
0xd0: 0x00000000
0xd4: 0x00000000
0xd8: 0x00000000
0xdc: 0x00000000
0xe0: 0x00000000
0xe4: 0x00000000
0xe8: 0x00000000
0xec: 0x00000000
0xf0: 0x00000000
0xf4: 0x00000000
0xf8: 0x00000000
0xfc: 0x00000000
pccard1: <PC Card bus (classic)> on pcic1
pci0: <serial bus, FireWire> at device 11.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xfc006800-0xfc0068ff irq 11 at device 12.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 08:00:74:50:46:2a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
atapci0: <AcerLabs Aladdin ATA33 controller> port 0x1800-0x180f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1ff at device 15.0 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
pci0: <serial bus, USB> at device 20.0 (no driver attached)
ex_isa_identify()
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
pcic-: pcic0 already exists, using pcic2 instead
pcic-: pcic1 already exists, using pcic3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 16 devices, largest 90 bytes
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 0 device ID PNP0a03 (030ad041)
PNP0c01: adding memory range 0-0x9bfff, size=0x9c000, align=0x1
PNP0c01: adding memory range 0xe0000-0xfffff, size=0x20000, align=0x1
PNP0c01: adding memory range 0xde000-0xdffff, size=0x2000, align=0x1
PNP0c01: adding fixed memory32 range 0x100000-0xf0ffbff, size=0xefffc00
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0c02: adding irq mask 0x200
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0xb1-0xb1, size=0x1, align=0x1
PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0x1
PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0x1
PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
pnpbios: handle 2 device ID PNP0c02 (020cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 4 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x8040-0x804f, size=0x10, align=0x1
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0c02: adding memory32 range 0x9c000-0x9ffff, size=0x4000, align=0x4000
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding memory32 range 0xd8000-0xdbfff, size=0x4000, align=0x4000
pnpbios: handle 12 device ID PNP0c02 (020cd041)
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 14 device ID PNP0f13 (130fd041)
pnpbios: handle 15 device ID PNP0700 (0007d041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xd8000-0xdbfff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd1: unable to allocate IRQ
psm0: current command byte:0047
psm0: the aux port is not functioning (-1).
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic2 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic3: not probed (disabled)
pmtimer0 on isa0
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 81
bf 1f 00 4f 0e 0f 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c02> can't assign resources
unknown: <PNP0c02> at iomem 0xd8000-0xdbfff on isa0
psmcpnp0: <PS/2 mouse port> at irq 12 on isa0
atkbd1: unable to allocate IRQ
psm0: current command byte:0047
psm0: the aux port is not functioning (-1).
fdc1: cannot reserve I/O port range (1 ports)
unknown: <PC standard floppy disk controller> failed to probe on isa0
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
splash: image decoder found: logo_saver
bpf: faith0 attached
bpf: lo0 attached
bpf: ppp0 attached
ad0: success setting UDMA4 on Acer chip
Creating DISK ad0
ad0: <IC25N030ATDA04-0/DA4OA70A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xc, start 417690, end = 4658849, size 4241160 : OK
ad0s2: type 0xa5, start 4658850, end = 57898259, size 53239410 : OK
ad0s3: type 0x83, start 63, end = 417689, size 417627 : OK
ad0s4: type 0xa0, start 57898260, end = 58605119, size 706860 : OK
start_init: trying /sbin/init
Linux ELF exec handler installed
----Next_Part(Mon_Sep_17_02:03:21_2001_142)----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010917.020321.74756726.iwasaki>