Date: Wed, 14 Feb 2001 14:39:10 -0500 From: "Eric L. Howard" <ehoward@ameritech.net> To: FreeBSD Stable E-mail LIst <freebsd-stable@FreeBSD.ORG> Subject: just keep on crashing... Message-ID: <20010214143910.A3906@ameritech.net>
next in thread | raw e-mail | index | archive | help
I'm attempting to get 4.2 up on a homebrew.
ASUS P2B-DS mobo w/ onboard aic7xxx
2 - Seagate ST39204LW U2 drives
Dual PIII 700Mhz
I'm almost consistently running into problems when I go to do stuff like cvsup
or even installing some packages. Seems as if whenever I get into something
pushing the drives heavy and consistently for any sustained period the machines
crashes.
Errors include
SCB 69: Immediate reset
and
Invalid pack
calling for an fsck each time of course...and no core files to be found.
I've checked everything from proper termination on the chain to actually
removing the Zip drive that was installed. Any ideas?
:r dmesg.out
-----------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #0: Wed Feb 14 13:47:42 EST 2001
root@ns1.boskatel.com:/usr/src/sys/compile/DNS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (701.59-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268423168 (262132K bytes)
avail memory = 258445312 (252388K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 11
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 19 -> irq 5
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02e3000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 5
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xb000-0xb0ff mem 0xe1000000-0xe1000fff irq 5 at device 6.0 on pci0
aic7890/91: Wide Channel A, SCSI Id=7, 32/255 SCBs
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xe0800000-0xe080007f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:01:02:75:2f:53
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata0-master using PIO4
ast0: TAPE <OnStream DI-30> at ata0-slave using PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39204LW 0002> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 8750MB (17921835 512 byte sectors: 255H 63S/T 1115C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST39204LW 0002> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 8750MB (17921835 512 byte sectors: 255H 63S/T 1115C)
swapon: adding /dev/da0s1b as swap device
Automatic boot in progress...
/dev/da0s1a:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a:
clean, 2420394 free
(13394 frags, 300875 blocks, 0.4% fragmentation)
/dev/da0s1e:
127 files, 308 used, 5198073 free
(377 frags, 649712 blocks, 0.0% fragmentation)
Doing initial network setup:
hostname
.
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.8.2 netmask 0xffffff00 broadcast 192.168.8.255
ether 00:01:02:75:2f:53
media: autoselect (10baseT/UTP) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 192.168.8.254
Additional routing options:
tcp extensions=NO
TCP keepalive=YES
.
routing daemons:
.
additional daemons:
syslogd
.
Doing additional network setup:
portmap
.
Starting final network daemons:
.
setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib
setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
starting standard daemons:
inetd
cron
sendmail
sshd
usbd
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 5 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
.
Initial rc.i386 initialization:
.
rc.i386 configuring syscons:
blank_time
moused
.
additional ABI support:
.
Local package initialization:
sshd
.
Feb 14 14:24:30 ns1 sshd[146]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
Feb 14 14:24:30 ns1 sshd[146]: fatal: Cannot bind any address.
Additional TCP options:
.
Wed Feb 14 14:24:30 EST 2001
Feb 14 14:25:02 ns1 login: ROOT LOGIN (root) ON ttyv0
--
E r i c L. H o w a r d e h o w a r d @ a m e r i t e c h . n e t
////////////////////////////////////////////////////////////////////////////////
"You can't hold a man down without staying down with him." -Booker T. Washington
PGP KeyID:0x27586E9B Fingerprint:0BF7 F677 E4F3 E2F1 ACBF F786 754A 8F11
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010214143910.A3906>