Date: Wed, 25 Apr 2012 17:15:19 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: Fabien Thomas <fabien.thomas@netasq.com> Cc: freebsd-arm@freebsd.org Subject: Re: Dreamplug : USB support Message-ID: <201204251715.19277.hselasky@c2i.net> In-Reply-To: <63BD8703-9C0C-468B-A649-6C35FEC4BB0C@netasq.com> References: <39ED732B-A88A-4052-976D-CB13F0CB1C0C@netasq.com> <201204251654.05895.hselasky@c2i.net> <63BD8703-9C0C-468B-A649-6C35FEC4BB0C@netasq.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 25 April 2012 17:05:47 Fabien Thomas wrote: > Le 25 avr. 2012 =E0 16:54, Hans Petter Selasky a =E9crit : > > On Wednesday 25 April 2012 16:15:55 Fabien Thomas wrote: > >> Hi, > >>=20 > >> It seems that sometimes USB works on Dreamplug and sometimes not. > >>=20 > >> I've included a working dmesg and a full debug output of the non-worki= ng > >> boot. I've tried to increase the timeout in usb.h but without success. > >>=20 > >> Maybe someone will have a clue for this problem ? > >>=20 > >> Fabien > >>=20 > >> Success: > >>=20 > >> uhub0: 1 port with 1 removable, self powered > >> Root mount waiting for: usbus0 > >> ugen0.2: <vendor 0x1a40> at usbus0 > >> uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on > >> usbus0 Root mount waiting for: usbus0 > >> uhub1: 4 ports with 4 removable, self powered > >> Root mount waiting for: usbus0 > >> Root mount waiting for: usbus0 > >> ugen0.3: <vendor 0x05e3> at usbus0 > >> umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/99.10, addr 3> > >> on usbus0 umass0: SCSI over Bulk-Only; quirks =3D 0x4000 > >> umass0:0:0:-1: Attached to scbus0 > >> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 > >> da0: <Generic STORAGE DEVICE 9910> Removable Direct Access SCSI-0 devi= ce > >> da0: 40.000MB/s transfers > >> da0: 3724MB (7626752 512 byte sectors: 255H 63S/T 474C) > >=20 > > Is this a hardware builtin USB device? >=20 > This is the SoC USB port that is connected to a hub and then USB to SD > controller > (https://www.globalscaletechnologies.com/t-dreamplugdetails.aspx#hw_block) > . I've not included the info but it was on 8.3 release. If it is possible to make a USB trace, that would probably give you the ans= wer=20 why it is not working. =2D-HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201204251715.19277.hselasky>