Date: Tue, 25 Apr 2006 04:56:50 GMT From: Paul Blair <toadlife@toadlife.net> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/96302: nVidia nForce CK804 SATA300 controller not recognizing SATA CD-ROM drive Message-ID: <200604250456.k3P4uoeU034377@www.freebsd.org> Resent-Message-ID: <200604250500.k3P50Qp5014749@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 96302
>Category: i386
>Synopsis: nVidia nForce CK804 SATA300 controller not recognizing SATA CD-ROM drive
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Apr 25 05:00:26 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Paul Blair
>Release: 6.1 RC (April 23 2006)
>Organization:
>Environment:
FreeBSD athlonxp-bsd.toadlife.kicks-ass.net 6.1-RC FreeBSD 6.1-RC #5: Mon Apr 24 20:00:39 PDT 2006 paul@athlonxp-bsd.toadlife.kicks-ass.net:/usr/obj/usr/src/sys/mykernel i386
>Description:
I have a ASUS A8N 32 SLI Deluxe Deluxe Motherboard. It's on-board SATA controller is shown as "nVidia nForce CK804 SATA300" controller at bootup. I have a Plextor PX-716SA SATA DVDRW drive connected to it, and it is not detected by FreeBSD. The drive is detected by the BIOS, and is operational in Windows. I tried moving the drive from SATA port 1 to port 4 on the motherboard to no avail.
I also have an Areca 1210 PCI-E SATAII RAID controller, in which my hard drives are connected. Unfortunately it doesn't do CD drives, so I can't plug my Plextor into it.
Here is my full dmesg output..
FreeBSD athlonxp-bsd.toadlife.kicks-ass.net 6.1-RC FreeBSD 6.1-RC #5: Mon Apr 24 20:00:39 PDT 2006 paul@athlonxp-bsd.toadlife.kicks-ass.net:/usr/obj/usr/src/sys/mykernel i386
%dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC #5: Mon Apr 24 20:00:39 PDT 2006
paul@athlonxp-bsd.toadlife.kicks-ass.net:/usr/obj/usr/src/sys/mykernel
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2210.07-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20f32 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 2147155968 (2047 MB)
avail memory = 2091921408 (1995 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <mass storage> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
nvidia0: <GeForce 7800 GT> port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 17 at device 0.0 on pci3
nvidia0: [GIANT-LOCKED]
pci0: <memory> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 21 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfebffc00-0xfebffcff irq 22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: waiting for BIOS to give up control
usb1: timed out waiting for BIOS
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
uhub1: device problem (TIMEOUT), disabling port 9
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0xe480-0xe487,0xe400-0xe403,0xe080-0xe087,0xe000-0xe003,0xdc00-0xdc0f mem 0xfebfd000-0xfebfdfff irq 23 at device 16.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce CK804 SATA300 controller> port 0xd880-0xd887,0xd800-0xd803,0xd480-0xd487,0xd400-0xd403,0xd080-0xd08f mem 0xfebfc000-0xfebfcfff irq 20 at device 17.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib4: <ACPI PCI-PCI bridge> at device 18.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <multimedia, video> at device 7.0 (no driver attached)
pcm0: <Creative EMU10K1> port 0xc880-0xc89f irq 18 at device 8.0 on pci4
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xd000-0xd007 mem 0xfebfb000-0xfebfbfff irq 21 at device 19.0 on pci0
nve0: Ethernet address 00:15:f2:cc:a8:2c
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:15:f2:cc:a8:2c
pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 0.0 on pci6
pci8: <PCI bus> on pcib7
arcmsr0: <ARECA ARC1210 PCI-EXPRESS 4 PORTS SATA RAID CONTROLLER
Driver Version 1.20.00.02> mem 0xfeaff000-0xfeafffff,0xdf800000-0xdfbfffff irq 19 at device 14.0 on pci8
arcmsr0: [GIANT-LOCKED]
pcib8: <PCI-PCI bridge> at device 0.2 on pci6
pci7: <PCI bus> on pcib8
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca ARC-1210-VOL#00 R001> Fixed Direct Access SCSI-3 device
da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled
da0: 572204MB (1171874816 512 byte sectors: 255H 63S/T 72945C)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s2a
>How-To-Repeat:
Plug Plextor PX-716SA into SATA port on ASUS A8N 32 SLI Deluxe Deluxe Motherboard.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200604250456.k3P4uoeU034377>