Date: Tue, 29 Nov 2005 22:53:16 GMT From: Juan Francisco Rodriguez Hervella <juan.fco.rodriguez@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/89738: Can't make WL8000PCM wifi card work with the latest drivers from Ovislink Message-ID: <200511292253.jATMrGs9084682@www.freebsd.org> Resent-Message-ID: <200511292300.jATN0GXq025501@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 89738 >Category: kern >Synopsis: Can't make WL8000PCM wifi card work with the latest drivers from Ovislink >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Nov 29 23:00:16 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Juan Francisco Rodriguez Hervella >Release: FreeBSD-6.0-RELEASE #0 >Organization: Alma Technologies >Environment: FreeBSD juanillo.no-ip.info 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC i386 >Description: I used ndisgen with the following files (downloaded from Ovislink) FwRad16.bin TNET1130.INF t1130_XP.sys The computer is an old Pentium MMX 200, with a PCI-to-PCMCIA card. Following is the dmesg output: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium/P55C (233.03-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 133169152 (127 MB) avail memory = 120774656 (115 MB) Intel Pentium detected, installing workaround for F00F bug npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard pci0: <PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 5513 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f irq 11 at device 1 .1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 ohci0: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 11 at device 1.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xe5800000-0xe58000ff irq 10 at device 9.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:30:bd:b5:b6:17 cbb0: <RF5C475 PCI-CardBus Bridge> irq 11 at device 12.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci0: <display, VGA> at device 19.0 (no driver attached) pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) Timecounter "TSC" frequency 233030923 Hz quality 800 Timecounters tick every 1.000 msec cardbus0: Expecting link target, got 0xa0 cardbus0: Resource not specified in CIS: id=10, size=2000 cardbus0: Resource not specified in CIS: id=14, size=20000 cardbus0: <network> at device 0.0 (no driver attached) ad0: 38166MB <Seagate ST340810A 3.99> at ata0-master UDMA33 acd0: CDRW <NEC NR-7500A/1.20> at ata1-master PIO4 Trying to mount root from ufs:/dev/ad0s4a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted /var: mount pending error: blocks 28 files 9 WARNING: /usr/home was not properly dismounted ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled When I make "kldload t1130_XP_sys.ko", the following appears ndis0: <OvisLink WL-8000PCM> mem 0x88020000-0x88021fff,0x88000000-0x8801ffff irq 11 at device 0.0 on cardbus0 ndis0: NDIS API version: 5.1 ndis0: init handler failed device_attach: ndis0 attach returned 6 If I put the modules on loader.conf, the computer gets frozen after showing the above messages. >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511292253.jATMrGs9084682>