Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 21 Nov 1998 18:32:09 -0600
From:      Chris Csanady <ccsanady@friley-185-114.res.iastate.edu>
To:        multimedia@FreeBSD.ORG
Subject:   Fxtv audio capture with current..
Message-ID:  <199811220032.SAA02887@friley-185-114.res.iastate.edu>

next in thread | raw e-mail | index | archive | help
I am using Fxtv 0.47, and can not seem to capture any audio.  After
I start the capture, fxtv freezes up and the process is stuck in the
dsprd state.  The capture file is created, although it is zero bytes.

This is using current as of today, although it was broken in my last
build as well. (Nov. 5 I think)  Any ideas?

Chris


Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Sat Nov 21 16:43:41 CST 1998
    ccsanady@friley-185-114.res.iastate.edu:/usr/src/sys/compile/xSMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium Pro (686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping=9
  Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
>
real memory  = 134217728 (131072K bytes)
avail memory = 127528960 (124540K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfec08000
 cpu1 (AP):  apic id: 12, version: 0x00040011, at 0xfec08000
 io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xf02c1000.
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 18 on 
pci0.6.
0
fxp0: Ethernet address 00:a0:c9:55:9e:4f
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
chip2: <Intel 82371SB USB host controller> rev 0x01 int d irq 11 on pci0.7.2
ahc0: <Adaptec aic7880 Ultra SCSI adapter> rev 0x00 int a irq 17 on pci0.9.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 16 on 
pci0.11.0
fxp1: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x04 int a irq 17 on 
pci0.15
.0
fxp1: Ethernet address 00:a0:c9:c8:d3:44
bktr0: <BrookTree 848> rev 0x12 int a irq 18 on pci0.17.0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
Probing for devices on iicbus0: <a0> <a1> <b6> <b7> <c2> <c3>
smbus0: <System Management Bus> on bti2c0
Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, dbx stereo.
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
pcm0 at 0x530 irq 9 drq 3 flags 0xa611 on isa
mss_attach <mss>0 at 0x530 irq 9 dma 3:1 flags 0xa611
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: routing 8254 via 8259 on pin 0
ccd0-3: Concatenated disk drivers
Waiting 2 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
da2 at ahc0 bus 0 target 2 lun 0
da2: <MICROP 4110-09NB_Nov18F TN0F> Fixed Direct Access SCSI2 device 
da2: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
da2: 1002MB (2053880 512 byte sectors: 64H 32S/T 1002C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM FIREBALL ST3.2S 0F04> Fixed Direct Access SCSI2 device 
da1: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da1: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL ST3.2S 0F04> Fixed Direct Access SCSI2 device 
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
cd1 at ahc0 bus 0 target 6 lun 1
cd1: <NAKAMICH MJ-5.16S 1.07> Removable CD-ROM SCSI2 device 
cd1: 3.300MB/s transfers
cd1: cd present [222001 x 2048 byte records]
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <NAKAMICH MJ-5.16S 1.07> Removable CD-ROM SCSI2 device 
cd0: 10.0MB/s transfers (10.0MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Start pid=2 <pagedaemon>
Start pid=3 <vmdaemon>
Start pid=4 <syncer>
cd2 at ahc0 bus 0 target 6 lun 2
cd2: <NAKAMICH MJ-5.16S 1.07> Removable CD-ROM SCSI2 device 
cd2: 10.0MB/s transfers (10.0MHz, offset 15)
cd2: cd present [208618 x 2048 byte records]
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
cd3 at ahc0 bus 0 target 6 lun 3
cd3: <NAKAMICH MJ-5.16S 1.07> Removable CD-ROM SCSI2 device 
cd3: 10.0MB/s transfers (10.0MHz, offset 15)
cd3: Attempt to query device size failed: NOT READY, Medium not present
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
cd4 at ahc0 bus 0 target 6 lun 4
cd4: <NAKAMICH MJ-5.16S 1.07> Removable CD-ROM SCSI2 device 
cd4: 10.0MB/s transfers (10.0MHz, offset 15)
cd4: Attempt to query device size failed: NOT READY, Medium not present
(da1:ahc0:0:1:0): tagged openings now 8
(da0:ahc0:0:0:0): tagged openings now 8


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199811220032.SAA02887>