Date: Sat, 20 Feb 99 16:21:12 -0800 From: Dennis Glatting <dennis.glatting@software-munitions.com> To: mjacob@feral.com Cc: Matthew Dillon <dillon@apollo.backplane.com>, Paul van der Zwan <paulz@trantor.xs4all.nl>, "Kenneth D. Merry" <ken@plutotech.com>, freebsd-current@FreeBSD.ORG Subject: Re: Slow seq. write on Seagate ST36530N Message-ID: <199902210021.QAA07057@imo.plaintalk.bellevue.wa.us> References: <Pine.LNX.4.04.9902201313490.31494-100000@feral-gw>
next in thread | previous in thread | raw e-mail | index | archive | help
Just to throw my voice in, I get crappy SCSI performance on my three SCSI card Dell. I don't understand why. -dpg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.1-RELEASE #1: Sat Feb 20 01:00:49 PST 1999 root@btw:/ExternalDisk/FreeBSD-btw-3.x/src/sys/compile/BTW Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (333.35-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x650 Stepping=0 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>> real memory = 134217728 (131072K bytes) avail memory = 127307776 (124324K bytes) Preloaded elf kernel "kernel" at 0xf031e000. Probing for devices on PCI bus 0: chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0 chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0 chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0 ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3 xl0: <3Com 3c905 Fast Etherlink XL 10/100BaseTX> rev 0x00 int a irq 10 on pci0.13.0 xl0: Ethernet address: 00:60:08:b0:3d:a6 xl0: autoneg complete, link status good (half-duplex, 10Mbps) ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 9 on pci0.14.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 3 on pci0.15.0 ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc2: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.16.0 ahc2: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Probing for devices on PCI bus 1: vga0: <VGA-compatible display device> rev 0x21 int a irq 9 on pci1.0.0 Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1 not found at 0x2f8 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <Seagate STT8000A/5.02>, removable, accel, dma, iordis wdc1: ATAPI streaming tapes not configured wt0 not found at 0x300 ppc0 at 0x378 irq 7 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode nlpt0: <generic printer> on ppbus 0 nlpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 5 drq 1 on isa snd0: <SoundBlaster 16 4.13> sbxvi0 at drq 5 on isa snd0: <SoundBlaster 16 4.13> sbmidi0 at 0x330 on isa snd0: <SoundBlaster MPU-401> IP packet filtering initialized, divert enabled, rule-based forwarding enabled, logging limited to 256 packets/entry IP Filter: initialized. Default = pass all, Logging = enabled Waiting 15 seconds for SCSI devices to settle sa0 at ahc2 bus 0 target 4 lun 0 sa0: <ARCHIVE ANCDA 2750 28077 -003> Removable Sequential Access SCSI-CCS device sa0: 3.300MB/s transfers changing root device tda1 at ahc1 bus 0 target 0 lun 0 da1: <SEAGATE ST410800W 4508> Fixed Direct Access SCSI-2 device da1: 20.0MB/s transfers (10.0MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8669MB (17755614 512 byte sectors: 64H 32S/T 8669C) o da0s1a cd0 at ahc0 bus 0 target 5 lun 0 cd0: <NEC CD-ROM DRIVE:464 1.05> Removable CD-ROM SCSI-2 device cd0: 20.0MB/s transfers (20.0MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present da3 at ahc2 bus 0 target 2 lun 0 da3: <SEAGATE ST43400N 1022> Fixed Direct Access SCSI-2 device da3: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled da3: 2777MB (5688447 512 byte sectors: 255H 63S/T 354C) da2 at ahc2 bus 0 target 1 lun 0 da2: <SEAGATE ST43400N 1028> Fixed Direct Access SCSI-2 device da2: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled da2: 2777MB (5688447 512 byte sectors: 255H 63S/T 354C) da0 at ahc0 bus 0 target 0 lun 0 da0: <WDIGTL WDE4360-1807A3 1.80> Fixed Direct Access SCSI-2 device da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit) da0: 4095MB (8388314 512 byte sectors: 255H 63S/T 522C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199902210021.QAA07057>