Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Dec 1999 13:58:35 -0600
From:      "Thomas T. Veldhouse" <veldy@visi.com>
To:        "FreeBSD-Current" <freebsd-current@FreeBSD.ORG>
Subject:   Re: de0 (Asante 10baseT tulip) not working with PNP BIOS
Message-ID:  <002601bf4e49$43fff410$0100a8c0@barley>
References:  <001101bf4e45$5eb28150$0100a8c0@barley>

next in thread | previous in thread | raw e-mail | index | archive | help
To follow up to myself.  I wanted to say that my reference to the mx drivers
was using a different NIC.  It was a Linksys 10/100 using PNIC II.

Tom Veldhouse
veldy@visi.com

----- Original Message -----
From: "Thomas T. Veldhouse" <veldy@visi.com>
To: "FreeBSD-Current" <freebsd-current@FreeBSD.ORG>
Sent: Friday, December 24, 1999 1:30 PM
Subject: de0 (Asante 10baseT tulip) not working with PNP BIOS


> Hello,
>
>     I have been trying to get my Asante (tulip) card to work under
FreeBSD.
> I used the same card on an older machine (PII-333), but had PNP shut off
in
> the BIOS.  My new machine does not have the option to shut off PNP in the
> BIOS (blame Compaq).  The de0 device is found and the network is setup as
> expected.  However, it never works with "device down" messages when I
> attempt to use it.  I looked through a dmesg output and saw it say that
the
> BIOS had not activated the device.  Well, if it (the kernel) sees that the
> device is there and not activated, shouldn't it activate it?  I
reinstalled
> Linux and it finds the card with a similar message and then activates the
> card using the tulip driver.
>
>     I have also noticed that the mx driver under FreeBSD 3.x activates the
> card just fine.  The above problem seem specific to the de driver.
>
>     I would be happy to give dmesg output, but like I said, I attempted to
> see what Linux did and I don't have access to the output anymore (until I
> reinstall again).
>
> Tom Veldhouse
> veldy@visi.com
>




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002601bf4e49$43fff410$0100a8c0>