Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 6 Sep 1999 12:45:45 -0400
From:      Jerry Alexandratos <darkstar@UDel.Edu>
To:        Peter Jeremy <jeremyp@gsmx07.alcatel.com.au>
Cc:        current@FreeBSD.ORG, hardware@FreeBSD.ORG
Subject:   Re: Support for 3Com 3CCFE574BT 10/100 LAN Card
Message-ID:  <19990906124545.A392@hellboy.wilm.fusa.com>
In-Reply-To: <99Sep6.112337est.40343@border.alcanet.com.au>
References:  <99Sep6.112337est.40343@border.alcanet.com.au>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Sep 06, 1999 at 11:25:05AM +1000, Peter Jeremy wrote:
: On Thu Sep  2 11:35:53 1999 -1000, I wrote:
: >I notice that -current supports the 3C574, but not the newer 3C574B.
: 
: I can offer some good news and some bad news:
: 
: The good news:  Support is trivial - at least in PAO3, and the relevant
: code is also in -current.  Patch (against PAO3) below.  You also need
: to duplicate the 3C574 lines in /etc/pccard.conf.sample with
: 'card "3Com" "Megahertz 574B"'.
: 
: The bad news: The card itself a a piece of cr*p.  On a 100baseTX LAN

More bad news.  The patch doesn't work.  8(  Here's the output I'm
getting.

Sep  6 12:41:30 hellboy pccardd[318]: Found existing driver (ep0) for 3Com 
Sep  6 12:41:30 hellboy pccardd[318]: Using I/O addr 0x300, size 32 
Sep  6 12:41:30 hellboy pccardd[318]: Setting config reg at offs 0x10000 to 0x41
, Reset time = 50 ms 
Sep  6 12:41:35 hellboy pccardd[318]: Assigning I/O window 0, start 0x300, size
0x20 flags 0x7 
Sep  6 12:41:35 hellboy pccardd[318]: Assign ep0, io 0x300-0x31f, mem 0x0, 0 byt
es, irq 11, flags 0 
Sep  6 12:41:35 hellboy pccardd[318]: driver allocation failed for 3Com(Megahert
z 574B): Inappropriate ioctl for device

This was with source cvsup'd approx 12:00 EDT today (1999-09-06).

Any ideas?

        --Jerry

name:  Jerry Alexandratos         ||  Open-Source software isn't a
phone: 302.593.4322               ||  matter of life or death...
email: darkstar@udel.edu          ||  ...It's much more important
                                  ||  than that!


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990906124545.A392>