Date: Sat, 16 Oct 1999 14:37:39 -0700 From: Edwin Culp <eculp@EnContacto.NET> To: Leonard Sitongia <sitongia@uswest.net> Cc: "Matthew N. Dodd" <winter@jurai.net>, current@FreeBSD.ORG Subject: Re: ed0 broken Message-ID: <3808F023.47448973@EnContacto.NET> References: <v04003a04b42e77dcd47a@[204.107.134.7]> <v04003a05b42e9616ef70@[204.107.134.7]>
next in thread | previous in thread | raw e-mail | index | archive | help
Leonard Sitongia wrote:
> At 2:47 PM -0400 10/16/99, Matthew N. Dodd wrote:
> >On Sat, 16 Oct 1999, Leonard Sitongia wrote:
> >> >download the patch, apply it in sys/dev/ed, edit files.i386 and uncomment
> >> >sys/dev/ed/if_ed_pccard.c. Re-config & make.
> >>
> >> I've tried it, and if_ed_pccard.c compiles now (Warner, that addresses
> >> the error messages that I recently sent you mail about).
> >
> >But does it work?
>
> No, but then I haven't ever gotten it working in the month or so that
> I've been running current on this Toshiba Portege 3110. Here's what
> happens:
>
> Oct 16 14:56:48 becker /kernel: pcic0: <Intel i82365> at irq 15 on isa0
> Oct 16 14:56:48 becker /kernel: pccard1: <PC Card bus -- kludge version> on
> pcic
> 0
> ...
> Oct 16 14:56:48 becker /kernel: pccard: initalizing drivers: ep fe
I don't see your ed driver. Is it in your kernel configuration file? You don't
really need ep IMHO and I don't know what fe is :-)
Mine says:
pcic: pccard bridge VLSI 82C146 (5 mem & 2 I/O windows)
pcic: controller irq 9
pccard: initalizing drivers: ed
Kernel config es
device ed0
no more
>
> ...
> (plug a Linksys Ethernet card in:)
I always bring it up with the card in, cowards way out.
>
>
> Oct 16 14:58:37 becker /kernel: pccard: card inserted, slot 0
> Oct 16 14:58:48 becker pccardd[42]: driver allocation failed for
> LINKSYS(E-CARD)
> : Device not configured
>
> This is the PCCARD kernel with no changes. All pccard stuff is enabled
I've always had a problem with that and have resorted to configuring it in
rc.local.
sleep 10
ifconfig ed0 inet 192.168.1.27 netmask 255.255.255.0
route add default 192.168.1.1
Again cowards way out but works fine:-)
Hope that helps,
ed
pccard.conf is
io 0x240-0x360
irq 9 11
memory 0xd4000 96k
# D-Link DE-660 NE2000 clone
card "D-Link" "DE-660"
config 0x20 "ed0" 11
# ether 0x81
insert /etc/pccard_ether ed0
remove /sbin/ifconfig ed0 delete
>
> in rc.conf.
>
> ==Leonard Sitongia
> sitongia@uswest.net
> http://www.users.uswest.net/~sitongia/
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3808F023.47448973>